VOS618A www.vishay.com Vishay Semiconductors Optocoupler, Phototransistor Output, Low Input Current, SSOP-4, Half Pitch, Mini-Flat Package FEATURES • High CTR with low input current A 1 4 C C 2 3 E • Low profile package (half pitch) • High collector emitter voltage, VCEO = 80 V • Isolation test voltage = 3750 VRMS • Low coupling capacitance • High common mode transient immunity 22628-1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION The VOS618A series has a GaAs infrared emitting diode emitter, which is optically coupled to a silicon planar phototransistor detector, and is incorporated in a 4-pin 50 mil lead pitch mini-flat package. APPLICATIONS It features a high current transfer ratio at low input current, low coupling capacitance, and high isolation voltage. • Battery powered equipment The coupling devices are designed for signal transmission between two electrically separated circuits. • Programmable controllers • Telecom • Industrial controls • Office machines AGENCY APPROVALS Safety application model number covering all products in this datasheet is VOS618A. This model number should be used when consulting safety agency documents. • UL1577, file no. E52744 • cUL • DIN EN 60747-5-5 (VDE 0884-5), available with option 1 • FIMKO EN 60065, EN 60950-1 • CQC GB4943.1-2011 and GB8898-2011 (suitable for installation altitude below 2000 m) ORDERING INFORMATION V O S 6 1 8 A PART NUMBER - # X CTR BIN 0 1 PACKAGE OPTION T TAPE AND REEL SSOP-4 ≥ 5 mm CTR (%) AGENCY CERTIFIED/PACKAGE UL, cUL, FIMKO, CQC 0 1 mA 50 to 600 63 to 125 100 to 200 80 to 160 130 to 260 SSOP-4, 50 mil pitch VOS618AT VOS618A-2T VOS618A-3T VOS618A-7T VOS618A-8T UL, cUL, FIMKO, CQC, VDE (option 1) 50 to 600 63 to 125 100 to 200 80 to 160 130 to 260 SSOP-4, 50 mil pitch VOS618A-X001T VOS618A-2X001T VOS618A-3X001T VOS618A-7X001T VOS618A-8X001T Note • Additional options may be possible, please contact sales office. Document Number: 83465 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.6, 13-Mar-15 VOS618A www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE UNIT INPUT VR 6 V Pdiss 70 mW IF 50 mA Collector emitter voltage VCEO 80 V Emitter collector voltage VECO 7 V Reverse voltage Power dissipation Forward current OUTPUT Collector current tp/T = 0.5, tp < 10 ms Power dissipation IC 50 mA IC 100 mA Pdiss 150 mW VISO 3750 VRMS COUPLER Isolation test voltage between emitter and detector t = 1 min Total power dissipation Ptot 170 mW Storage temperature range Tstg -55 to +150 °C Ambient temperature range Tamb -55 to +110 °C Tj 125 °C Tsld 260 °C Junction temperature Soldering temperature (1) t = 10 s 160 60 140 IF - Forward Current (mA) Pdiss - Collector Power Dissipation (mW) Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to reflow profile for soldering conditions for surface mounted devices. 120 100 80 60 40 20 0 50 40 30 20 10 0 - 25 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) Fig. 1 - Power Dissipation vs. Ambient Temperature - 25 0 25 50 75 100 125 Tamb - Ambient Temperature (°C) Fig. 2 - Forward Current vs. Ambient Temperature Document Number: 83465 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.6, 13-Mar-15 VOS618A www.vishay.com Vishay Semiconductors ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL Forward voltage IF = 50 mA Reverse current VR = 6 V VF = 0 V, f = 1 MHz MIN. TYP. MAX. UNIT VF 1.1 1.5 V IR 0.01 10 μA CI 8 INPUT Input capacitance pF OUTPUT Collector emitter leakage current VCE = 10 V ICEO Collector emitter breakdown voltage IC = 100 μA BVCEO 80 V Emitter collector breakdown voltage IE = 10 μA BVECO 7 V VCE = 5 V, f = 1 MHz CCE 6 Collector emitter capacitance 0.7 100 nA pF COUPLER Collector emitter saturation voltage Cut-off frequency IF = 1 mA, IC = 0.25 mA VCEsat 0.12 IF = 10 mA, VCC = 5 V, RL = 100 Ω fctr 119 kHz f = 1 MHz CC 0.3 pF Coupling capacitance 0.4 V Note • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. CURRENT TRANSFER RATIO (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION IC/IF IF = 1 mA, VCE = 5 V PART SYMBOL MIN. MAX. UNIT VOS618A CTR 50 TYP. 600 % VOS618A-2 CTR 63 125 % VOS618A-3 CTR 100 200 % VOS618A-7 CTR 80 160 % VOS618A-8 CTR 130 260 % MAX. UNIT SWITCHING CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. TYP. VCC = 5 V, IC = 2 mA, RL = 100 Ω ton tr toff tf 5 5 8 7 μs μs μs μs IF = 1.6 mA, VCC = 5 V, RL = 1.9 kΩ tr tf ton toff 10 11 14 12 μs μs μs μs NON-SATURATED Turn on time Rise time Turn off time Fall time SATURATED Rise and fall time Fall time Turn on time Turn off time VCC = 5 V Input Input pulse RL VOUT 10 % Output pulse 90 % tr t on isfh618a_10 tf t off isfh618a_12 Fig. 3 - Test Circuit Fig. 4 - Test Circuit and Waveforms Document Number: 83465 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.6, 13-Mar-15 VOS618A www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER TEST CONDITION SYMBOL VALUE Climatic classification (according to IEC 68 part 1) UNIT 55/110/21 Comparative tracking index CTI 175 VISO 3750 Maximum transient isolation voltage VIOTM 6000 Vpeak Maximum repetitive peak isolation voltage VIORM 565 Vpeak Tamb = 25 °C, VDC = 500 V RIO ≥ 1012 Ω Tamb = 100 °C, VDC = 500 V RIO ≥ 1011 Ω Output safety power PSO 300 mW Input safety current ISI 200 mA Input safety temperature TSI 150 °C ≥5 mm ≥5 mm ≥ 0.4 mm Maximum rated withstanding isolation voltage 40 % to 80 % RH, AC test of t = 1 min Isolation resistance Creepage distance Clearance distance Insulation thickness DTI Environment (pollution degree in accordance to DIN VDE 0109) VRMS 2 Note • As per IEC 60747-5-5, § 7.4.3.8.2, this optocoupler is suitable for “safe electrical insulation” only within the safety ratings. Compliance with the safety ratings shall be ensured by means of protective circuits. TYPICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) Tamb = 110 °C Tamb = 75 °C Tamb = 25 °C Tamb = 0 °C Tamb = -55 °C 10 IC - Collector Current (mA) IF - Forward Current (mA) 100 1 IF = 25 mA 50 IF = 20 mA 40 IF = 15 mA 30 IF = 10 mA 20 10 IF = 5 mA IF = 1 mA 0 0.1 0.6 0.8 1.0 1.2 1.4 1.6 VF - Forward Voltage (V) Fig. 5 - Forward Voltage vs. Forward Current 0 1 2 3 4 5 6 7 8 9 10 VCE - Collector Emitter Voltage (V) Fig. 6 - Collector Current vs. Collector Emitter Voltage Document Number: 83465 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.6, 13-Mar-15 VOS618A www.vishay.com Vishay Semiconductors 10 000 1.4 NCTR - Normalized CTR (sat) ICE0 - Leakage Current (nA) IF = 0 mA 1000 VCE = 40 V 100 10 VCE = 24 V 1 0.1 VCE = 12 V 0.01 0.001 1.2 1.0 0.8 0.6 0.4 0.2 0 -60 -40 -20 0 20 40 60 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 80 100 120 IC - Collector Current (mA) 35 IF = 25 mA 25 20 IF = 1 mA IF = 10 mA IF = 0.5 mA IF = 5 mA 15 10 5 IF = 2 mA 0 0.0 0.1 0.2 0.3 40 60 80 100 120 0.4 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 Normalized to CTR value: IF = 1 mA, VCE = 5 V, Tamb = 25 °C -60 -40 -20 Fig. 8 - Collector Current vs. Collector Emitter Voltage 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) VCE - Collector Emitter Voltage (V) Fig. 11 - Normalized Current Transfer Ratio vs. Ambient Temperature (non-saturated) 2.0 IF = 1 mA 0.10 0.08 0.06 0.04 0.02 NCTR - Normalized CTR (sat) 0.12 VCEsat - Collector Emitter Voltage (V) 20 Fig. 10 - Normalized Current Transfer Ratio vs. Ambient Temperature (saturated) NCTR - Normalized CTR (non-saturated) Fig. 7 - Collector Emitter Current vs. Ambient Temperature 30 0 Tamb - Ambient Temperature (°C) Tamb - Ambient Temperature (°C) Tamb = 0 °C 1.8 1.6 Tamb = -55 °C 1.4 1.2 1.0 0.8 0.6 Tamb = 25 °C 0.4 Normalized to: IF = 1 mA, VCE = 5 V, T Tamb = 110 °C amb = 25 °C 0.2 0.0 0.00 -60 -40 -20 0 20 40 60 80 100 120 Tamb - Ambient Temperature (°C) Fig. 9 - Collector Emitter Voltage vs. Ambient Temperature 0.1 1 10 100 IF - Forward Current (mA) Fig. 12 - Current Transfer Ratio vs. Forward Current (saturated) Document Number: 83465 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.6, 13-Mar-15 VOS618A www.vishay.com Vishay Semiconductors 1000 Tamb = 0 °C Tamb = -55 °C 2.0 1.5 Tamb = 25 °C 1.0 Tamb = 110 °C 0.5 Normalized to: IF = 1 mA, VCE = 5 V, Tamb = 25 °C 0.0 0.1 1 10 ton, toff - Switching Time (μs) NCTR - Normalized CTR (NS) 2.5 VCE = 5 V IC = 2 mA toff (μs) 100 ton (μs) 10 1 100 0 Fig. 13 - Current Transfer Ratio vs. Forward Current (non-saturated) 10 15 20 Fig. 16 - Switching Time vs. Load Resistance 0 1000 VCE = 5 V, Tamb = 25 °C RL = 100 Ω -5 -10 100 Voltage Gain FCTR - Cut-off-Frequency (kHz) 5 RL - Load Resistance (kΩ) IF - Forward Current (mA) 10 -15 -20 RL = 1000 Ω -25 -30 -35 1 0.1 VCE = 5 V -40 1 10 100 IC - Collector Current (mA) 1 10 100 1000 f - Frequency (kHz) Fig. 14 - Cut-off Frequency (- 3 dB) vs. Collector Current Fig. 17 - Voltage Gain vs. Frequency 0 VCE = 5 V Phase Angle (deg) -20 RL = 100 Ω -40 -60 -80 -100 RL = 1000 Ω -120 -140 -160 1 10 100 1000 f - Frequency (kHz) Fig. 15 - Phase Angle vs. Frequency Document Number: 83465 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.6, 13-Mar-15 VOS618A www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS in millimeters 4.4 ± 0.2 5.3 ± 0.3 0.5 7.0 0.2 ± 0.05 1.27 ± 0.25 + 0.2 - 0.7 0.12 ± 0.1 0.9 1.27 2.0 ± 0.2 2.6 ± 0.3 5.0 7.5 0.4 ± 0.1 22629-2 PACKAGE MARKING (example of VOS618A-3X001T) Pin 1 dimple 618A3X V YWW 25 Notes • Option 1 is reflected with letter “X”. • Tape and reel suffix (T) is not part of the package marking. Document Number: 83465 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.6, 13-Mar-15 VOS618A www.vishay.com Vishay Semiconductors TAPE AND REEL DIMENSIONS in millimeters 17.1 100 330 (13") Fig. 18 - Reel Dimensions (3000 units per reel) Ø 1.50 ± 0.1 2 ± 0.1 4 ± 0.1 1.75 ± 0.1 5.5 ± 0.1 12 ± 0.3 8 ± 0.1 0.35 ± 0.05 Fig. 19 - Tape Dimensions SOLDER PROFILE HANDLING AND STORAGE CONDITIONS ESD level: HBM class 2 300 Temperature (°C) max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 Floor life: unlimited Conditions: Tamb < 30 °C, RH < 85 % Moisture sensitivity level 1, according to J-STD-020 200 max. 30 s 150 max. 100 s max. 120 s 100 max. ramp down 6 °C/s 50 max. ramp up 3 °C/s 0 0 19841 50 100 150 200 250 300 Time (s) Fig. 20 - Lead (Pb)-free Reflow Solder Profile according to J-STD-020 Document Number: 83465 8 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Rev. 1.6, 13-Mar-15 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000