K3020P, K3020PG Series www.vishay.com Vishay Semiconductors Optocoupler, Phototriac Output, Non-Zero Crossing, 400 VDRM FEATURES SMD • 400 V blocking voltage • Isolation test voltage, 5300 VRMS, t = 1 s DIP A 1 6 MT2 • Isolation materials per UL94 C 2 5 NC • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 4 MT1 NC 3 APPLICATIONS • High current triac driver • Solid state relay • Switch small AC loads i179041-2 AGENCY APPROVALS • UL1577, file no. E52744 system code H DESCRIPTION • CSA notice 5A compliant, cUL tested The K3020P, K3020PG series consists of a phototriac optically coupled to a gallium arsenide infrared-emitting diode in a 6-lead plastic dual inline package • DIN EN 60747-5-5 (VDE0884) • BSI IEC 60950; IEC 60065 • CQC: GB8898-2001 ORDERING INFORMATION K 3 0 2 0 P PART NUMBER # X TRIGGER CURRENT BIN 0 # # PACKAGE OPTION AGENCY CERTIFIED/PACKAGE DIP-6 G leadform 7.62 mm 10.16 mm T TAPE AND REEL TRIGGER CURRENT, IFT VDE, cUL, BSI 3.6 mA 5 mA 10 mA 15 mA 30 mA DIP-6 K3036P K3023P K3022P K3021P K3020P K3036PG K3023PG K3022PG K3021PG K3020PG DIP-6, 400 mil Note • G = leadform 10.16 mm; G is not marked on the body. ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT INPUT Reverse voltage VR 5 V Forward current IF 80 mA IFSM 3 A Pdiss 100 mW Tj 100 °C Peak off-state voltage VDRM 400 V On-state RMS current ID(RMS) 100 mA Surge current P.W. < 10 μs Power dissipation Junction temperature OUTPUT Peak surge current Power dissipation Junction temperature Rev. 2.3, 23-May-12 tp 10 ms IFSM 1.5 A Pdiss 300 mW Tj 100 °C Document Number: 83505 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K3020P, K3020PG Series www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL VALUE UNIT COUPLER VISO 5300 VRMS Total power dissipation Ptot 350 mW Storage temperature range Tstg - 55 to + 150 °C Ambient temperature Tamb - 55 to + 100 °C Junction temperature Tj 100 °C Tsld 260 °C Isolation voltage Lead soldering temperature (1) t=1s 2 mm from case, t < 10 s Notes • Stresses in excess of the absolute maximum ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute maximum ratings for extended periods of the time can adversely affect reliability. (1) Refer to wave profile for soldering conditions for through hole devices (DIP) “Assembly Instructions” (www.vishay.com/doc?80054) ELECTRICAL CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION PART SYMBOL MIN. TYP. MAX. 1.3 1.6 UNIT INPUT Forward voltage IF = 50 mA VF Reverse voltage IR = 10 μA VR VR = 0 V, f = 1 MHz Cj Forward peak off-state voltage (repetitive) IDRM = 100 nA VDRM (1) Peak on-state voltage Junction capacitance 5 V V 50 pF OUTPUT 400 V ITM = 100 mA VTM 1.5 Critical rate of rise of off-state voltage IF = 0 A, VD = 0.67 VDRM dV/dtcr 10 V/μs Critical rate of rise of on-state current commutation VD = 30 VRMS, ID = 15 mARMS dV/dtcrq 0.15 V/μs 0.1 3 V COUPLER (2) Emitting diode trigger current Holding current VS = 3 V, RL = 150 IF = 10 mA, VS 3 V K3020P IFT 15 30 K3020PG IFT 15 30 mA mA K3021P IFT 8 15 mA K3021PG IFT 8 15 mA K3022P IFT 5 10 mA K3022PG IFT 5 10 mA K3023P IFT 3 5 mA K3023PG IFT 3 5 mA K3036P IFT 2 3.6 mA K3036PG IFT 2 3.6 mA IH 200 μA Notes • Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. (1) Test voltage must be applied within dV/dt ratings. (2) I is defined as a minimum trigger current. FT Rev. 2.3, 23-May-12 Document Number: 83505 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K3020P, K3020PG Series www.vishay.com Vishay Semiconductors SAFETY AND INSULATION RATINGS PARAMETER SYMBOL MIN. Climatic classification (according to IEC 68 part 1) TYP. MAX. UNIT 55/100/21 Pollution degree (DIN VDE 0109) 2 Comparative tracking index CTI Peak transient overvoltage VIOTM 8000 Vpeak Peak working insulation voltage VIORM 890 Vpeak 1669 Vpeak Partial discharge test voltage (method a, Vpd = VIORM x 1.875) 175 Vpd RIO 1011 Isolation resistance at Tamb = 25 °C, VDC = 500 V RIO 1012 Safety rating - power Isolation resistance at Tamb = 100 °C, VDC = 500 V PSO 265 mW Safety rating - input current ISI 130 mA Safety rating - temperature TSI 150 °C Clearance distance (Standard DIP-6) 7 mm Creepage distance (Standard DIP-6) 7 mm Clearance distance (400 mil DIP-6) 8 mm Creepage distance (400 mil DIP-6) 8 mm Note • According to DIN EN60747-5-5 (see figure 4). This optocoupler is suitable for safe electrical isolation only within the safety ratings. Compliance with the safety ratings shall be ensured by means of suitable protective circuits. Rev. 2.3, 23-May-12 Document Number: 83505 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 K3020P, K3020PG Series www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS millimeters 3 2 1 4 5 6 Pin one ID 6.4 ± 0.1 ISO method A 8.6 ± 0.1 1 min. 7.62 typ. 1.2 ± 0.1 3.555 ± 0.255 18° 4° typ. 2.95 ± 0.5 0.8 min. 0.85 ± 0.05 3° to 9° 0.5 ± 0.05 0.25 typ. 7.62 to 8.81 i178004 2.54 typ. G Series 10.36 9.96 7.8 7.4 0.35 0.25 18450-5 10.16 10.92 PACKAGE MARKING (example) K3020P V YWW H 68 Notes • The “G” of the G leadform type is not marked on the body. • The VDE logo is only marked on option1 parts. Rev. 2.3, 23-May-12 Document Number: 83505 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000