SB020, SB030, SB040, SB050, SB060 www.vishay.com Vishay General Semiconductor Miniature Schottky Barrier Plastic Rectifier FEATURES • Guardring for overvoltage protection • Very small conduction losses • Extremely fast switching • Low forward voltage drop • High frequency operation • Solder dip 275 °C max. 10 s, per JESD 22-B106 MPG06 • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 TYPICAL APPLICATIONS For use in low voltage high frequency inverters, freewheeling, DC/DC converters, and polarity protection applications. PRIMARY CHARACTERISTICS IF(AV) 0.6 A VRRM 20 V, 30 V, 40 V, 50 V, 60 V IFSM 20 A VF 0.55 V, 0.70 V TJ max. 125 °C, 150 °C Package MPG06 Diode variations Single MECHANICAL DATA Case: MPG06 Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS-compliant, commercial grade Terminals: Matte tin plated leads, solderable J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test per Polarity: Color band denotes the cathode end MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL SB020 SB030 SB040 SB050 SB060 UNIT Maximum repetitive peak reverse voltage VRRM 20 30 40 50 60 V Maximum RMS voltage VRMS 14 21 28 35 42 V Maximum DC blocking voltage VDC 20 30 40 50 60 V Maximum average forward rectified current at 0.375" (9.5 mm) lead length (fig. 1) IF(AV) 0.6 A Peak forward surge current 8.3 ms single half sine-wave superimposed on rated load IFSM 20 A Operating junction temperature range Storage temperature range - 65 to + 125 TJ TSTG - 65 to + 150 - 65 to + 150 °C °C ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER TEST CONDITIONS Maximum instantaneous forward voltage 0.6 A Maximum instantaneous reverse current at rated DC blocking voltage TA = 25 °C TA = 100 °C SYMBOL VF (1) SB020 SB030 SB040 0.55 SB050 SB060 0.70 UNIT V 0.5 IR (1) mA 10 5.0 Note (1) Pulse test: 300 μs pulse width, 1 % duty cycle Revision: 13-Aug-13 Document Number: 88714 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SB020, SB030, SB040, SB050, SB060 www.vishay.com Vishay General Semiconductor THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL Typical thermal resistance SB020 SB030 SB040 RJA (1) 80 RJL (1) 20 SB050 SB060 UNIT °C/W Note (1) Thermal resistance junction to lead PCB mounted 0.375" (9.5 mm) lead length ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (G) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE SB040-E3/54 0.203 54 5500 13" diameter paper tape and reel SB040-E3/73 0.203 73 3000 Ammo pack packaging RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 10 Resistive or Inductive Load 0.375" (9.5 mm) Lead Length Instantaneous Forward Current (A) Average Forward Current (A) 0.8 0.6 SB050 to SB060 0.4 SB020 to SB040 0.2 0 1 TJ = 100 °C 0.1 TJ = 25 °C SB020 to SB040 SB050 to SB060 0.01 0 20 40 60 80 100 120 140 160 0 0.2 0.4 0.6 0.8 1.0 1.2 Lead Temperature (°C) Instantaneous Forward Voltage (V) Fig. 1 - Forward Current Derating Curve Fig. 3 - Typical Instantaneous Forward Characteristics 25 10 TJ = TJ Max. 8.3 ms Single Half Sine-Wave 20 15 10 5 Instantaneous Reverse Leakage Current (mA) Peak Forward Surge Current (A) TJ = 125 °C TJ = 125 °C 1 0.1 TJ = 100 °C 0.01 SB020 to SB040 SB050 to SB060 TJ = 25 °C 0.001 0 1 10 100 0 20 40 60 80 100 Number of Cycles at 60 Hz Percent of Rated Peak Reverse Voltage (%) Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current Fig. 4 - Typical Reverse Leakage Characteristics Revision: 13-Aug-13 Document Number: 88714 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SB020, SB030, SB040, SB050, SB060 www.vishay.com Vishay General Semiconductor 100 TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p Transient Thermal Impedance (°C/W) Junction Capacitance (pF) 1000 100 10 0.1 1 10 10 1 0.1 0.01 100 0.1 1 10 Reverse Voltage (V) t - Pulse Duration (s) Fig. 5 - Typical Junction Capacitance Fig. 6 - Transient Thermal Impedance 100 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) MPG06 0.100 (2.54) 0.090 (2.29) DIA. 1.0 (25.4) MIN. 0.125 (3.18) 0.115 (2.92) 1.0 (25.4) MIN. 0.025 (0.635) 0.023 (0.584) DIA. Revision: 13-Aug-13 Document Number: 88714 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000