VISHAY MPG06M

MPG06A thru MPG06M
Vishay General Semiconductor
Miniature Glass Passivated Junction Plastic Rectifier
FEATURES
• Glass passivated chip junction
• Low forward voltage drop
• Low leakage current, typical IR less than 0.1 μA
• High forward surge capability
• Solder dip 275 °C max. 10 s, per JESD 22-B106
MPG06
• AEC-Q101 qualified
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TYPICAL APPLICATIONS
For use in general purpose rectification of power supplies,
inverters, converters, and freewheeling diodes application.
PRIMARY CHARACTERISTICS
IF(AV)
1.0 A
VRRM
50 V to 1000 V
IFSM
40 A
VF
1.1 V
IR
5.0 μA
TJ max.
150 °C
MECHANICAL DATA
Case: MPG06, molded epoxy over passivated chip
Molding compound meets UL 94 V-0 flammability rating
Base P/N-E3 - RoHS compliant, commercial grade
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix
meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL
MPG06A
MPG06B
MPG06D
MPG06G
MPG06J
MPG06K
MPG06M
UNIT
Maximum repetitive peak
reverse voltage
VRRM
50
100
200
400
600
800
1000
V
Maximum RMS voltage
VRMS
35
70
140
280
420
560
700
V
Maximum DC blocking voltage
VDC
50
100
200
400
600
800
1000
V
Maximum average forward
rectified current 0.375" (9.5 mm)
lead length at TA = 25 °C
IF(AV)
1.0
A
Peak forward surge current
8.3 ms single half sine-wave
superimposed on rated load
IFSM
40
A
TJ, TSTG
- 55 to + 150
°C
Operating junction and
storage temperature range
Document Number: 88682
Revision: 15-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
1
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPG06A thru MPG06M
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
TEST CONDITIONS
Maximum
instantaneous
forward voltage
1.0 A
Maximum DC
reverse current
at rated DC
blocking voltage
SYMBOL MPG06A MPG06B MPG06D MPG06G MPG06J MPG06K MPG06M UNIT
VF
1.1
TA = 25 °C
V
5.0
IR
μA
TA = 125 °C
50
Typical reverse
recovery time
IF = 0.5 A, IR = 1.0 A,
Irr = 0.25 A
trr
1.6
μs
Typical junction
capacitance
4.0 V, 1 MHz
CJ
10
pF
THERMAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
PARAMETER
SYMBOL MPG06A MPG06B MPG06D MPG06G MPG06J MPG06K MPG06M UNIT
Typical thermal resistance
RJA (1)
67
(1)
30
RJL
°C/W
Note
(1) Thermal resistance from junction to ambient and from junction to lead at 0.375" (9.5 mm) lead length, PCB mounted with 0.22" x 0.22"
(5.5 mm x 5.5 mm) copper pads
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.202
54
5500
13" diameter paper tape and reel
MPG06J-E3/54
MPG06J-E3/73
0.202
73
3000
Ammo pack packaging
MPG06JHE3/54 (1)
0.202
54
5500
13" diameter paper tape and reel
MPG06JHE3/73 (1)
0.202
73
3000
Ammo pack packaging
Note
(1) AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
50
60 Hz
Resistive or Inductive Load
0.375" (9.5 mm) Lead Length
1.0
Peak Forward Surge Current (A)
Average Forward Rectified Current (A)
1.2
0.8
0.6
Capacitive
Loads
5.0
Ipk
= 10
IAV
20
0.4
0.2
0
TJ = TJ Max.
8.3 ms Single Half Sine-Wave
40
No Load Condition
30
Rated Load
20
10
0
0
25
50
75
100
125
150
175
1
10
100
Ambient Temperature (°C)
Number of Cycles at 60 Hz
Fig. 1 - Forward Current Derating Curve
Fig. 2 - Maximum Non-Repetitive Peak Forward Surge Current
www.vishay.com
2
For technical questions within your region, please contact one of the following:
Document Number: 88682
[email protected], [email protected], [email protected]
Revision: 15-Mar-11
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
MPG06A thru MPG06M
Vishay General Semiconductor
100
Junction Capacitance (pF)
Instantaneous Forward Current (A)
100
10
TJ = 150 °C
TJ = 25 °C
Pulse Width = 300 μs
1 % Duty Cycle
1
0.1
0.01
0.4
10
1
0.6
0.8
1.0
1.2
1.4
1.6
1.8
1
10
100
Instantaneous Forward Voltage (V)
Reverse Voltage (V)
Fig. 3 - Typical Instantaneous Forward Characteristics
Fig. 5 - Typical Junction Capacitance
10
100
Transient Thermal Impedance (°C/W)
Instantaneous Reverse Current (μA)
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
TJ = 125 °C
1
TJ = 75 °C
0.1
TJ = 25 °C
0.01
0
20
40
60
80
10
1
0.1
0.01
100
0.1
1
10
100
Percent of Rated Peak Reverse Voltage (%)
t - Pulse Duration (s)
Fig. 4 - Typical Reverse Characteristics
Fig. 6 - Typical Transient Thermal Impedance
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
MPG06
0.100 (2.54)
0.090 (2.29)
DIA.
1.0 (25.4)
MIN.
0.125 (3.18)
0.115 (2.92)
1.0 (25.4)
MIN.
0.025 (0.635)
0.023 (0.584)
DIA.
Document Number: 88682
Revision: 15-Mar-11
For technical questions within your region, please contact one of the following:
www.vishay.com
[email protected], [email protected], [email protected]
3
This datasheet is subject to change without notice.
THE PRODUCT DESCRIBED HEREIN AND THIS DATASHEET ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1