VISHAY TMPG06-13A

TMPG06-6.8 thru TMPG06-43A
Vishay General Semiconductor
PAR® Transient Voltage Suppressors
High Temperature Stability and High Reliability Conditions
FEATURES
• Junction passivation optimized design
passivated anisotropic rectifier technology
• TJ = 185 °C capability suitable for high
reliability and automotive requirement
• Available in uni-directional polarity only
• 400 W peak pulse power capability with a
10/1000 µs waveform, repetitive rate (duty cycle):
0.01 %
MPG06
• Excellent clamping capability
• Very fast response time
PRIMARY CHARACTERISTICS
• Low incremental surge resistance
• Solder dip 275 °C max. 10 s, per JESD 22-B106
VBR
6.8 V to 43 V
PPPM
400 W
• AEC-Q101 qualified
PD
1.0 W
IFSM
40 A
• Compliant to RoHS Directive 2002/95/EC and in
accordance to WEEE 2002/96/EC
TJ max.
185 °C
TYPICAL APPLICATIONS
Use in sensitive electronics protection against voltage
transients induced by inductive load switching and
lighting on ICs, MOSFET, signal lines of sensor units
for consumer, computer, industrial, automotive and
telecommunication.
MECHANICAL DATA
Case: MPG06, molded epoxy over passivated junction
Molding compound meets UL 94 V-0 flammability
rating
Base P/NHE3 - RoHS compliant, AEC-Q101 qualified
Terminals: Matte tin plated leads, solderable per
J-STD-002 and JESD 22-B102
HE3 suffix meets JESD 201 class 2 whisker test
Polarity: Color band denotes cathode end
MAXIMUM RATINGS (TA = 25 °C unless otherwise noted)
PARAMETER
Peak power dissipation with a 10/1000 µs waveform (1) (fig. 1)
Peak pulse current with a 10/1000 µs waveform
(1)(2)
LIMIT
UNIT
PPPM
400
W
IPPM
See next table
A
Power dissipation on infinite heatsink at TL = 75 °C (fig. 5)
PD
1.0
W
Peak forward surge current 8.3 ms single half sine-wave (2)
IFSM
40
A
Maximum instantaneous forward voltage at 25
A (2)
Operating junction and storage temperature range
(fig. 3)
SYMBOL
VF
3.5
V
TJ, TSTG
- 65 to + 185
°C
Notes:
(1)
(2)
Non-repetitive current pulse, per fig. 3 and derated above TA = 25 °C per fig. 2
Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum
Document Number: 88404
Revision: 09-Feb-11
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
www.vishay.com
1
TMPG06-6.8 thru TMPG06-43A
Vishay General Semiconductor
ELECTRICAL CHARACTERISTICS (TA = 25 °C unless otherwise noted)
MAXIMUM
BREAKDOWN
DEVICE TYPE
VOLTAGE VBR (1)
AT IT (V)
TEST
CURRENT
IT (mA)
STANDOFF
VOLTAGE
VWM
(V)
MAXIMUM
REVERSE
LEAKAGE
AT VWM
ID (µA)
REVERSE
LEAKAGE
AT VWM
TJ = 150 °C
ID (µA)
PEAK
PULSE
CURRENT
IPPM (2)
(A)
MAXIMUM
MAXIMUM
CLAMPING
TEMP.
VOLTAGE COEFFICIENT
AT IPPM
OF VBR
VC (V)
(%/°C)
MIN.
MAX.
TMPG06-6.8 (4)
6.12
7.48
10.0
5.50
300
1000
27.8
10.8
TMPG06-6.8A (4)
6.45
7.14
10.0
5.80
300
1000
28.6
10.5
0.057
TMPG06-7.5 (4)
6.75
8.25
10.0
6.05
150
500
25.6
11.7
0.060
7.13
7.88
10.0
6.40
150
500
26.5
11.3
0.061
7.38
9.02
10.0
6.63
50.0
200
24.0
12.5
0.065
7.79
8.61
10.0
7.02
50.0
200
24.8
12.1
0.065
TMPG06-7.5A
TMPG06-8.2
(4)
(4)
TMPG06-8.2A (4)
TMPG06-9.1
(4)
TMPG06-9.1A (4)
0.057
8.19
10.0
1.0
7.37
10.0
50.0
21.7
13.8
0.068
8.65
9.55
1.0
7.78
10.0
50.0
22.4
13.4
0.068
TMPG06-10
9.00
11.0
1.0
8.10
5.0
20.0
26.7
15.0
0.073
TMPG06-10A
9.50
10.5
1.0
8.55
5.0
20.0
27.6
14.5
0.073
0.075
TMPG06-11
9.90
12.1
1.0
8.92
2.0
10.0
24.7
16.2
TMPG06-11A
10.5
11.6
1.0
9.40
2.0
10.0
25.6
15.6
0.075
TMPG06-12
10.8
13.2
1.0
9.72
1.0
5.0
23.1
17.3
0.076
TMPG06-12A
11.4
12.6
1.0
10.2
1.0
5.0
24.0
16.7
0.078
TMPG06-13
11.7
14.3
1.0
10.5
1.0
5.0
21.1
19.0
0.081
TMPG06-13A
12.4
13.7
1.0
11.1
1.0
5.0
22.0
18.2
0.081
TMPG06-15
13.5
16.3
1.0
12.1
1.0
5.0
18.2
22.0
0.084
TMPG06-15A
14.3
15.8
1.0
12.8
1.0
5.0
18.9
21.2
0.084
TMPG06-16
14.4
17.6
1.0
12.9
1.0
5.0
17.0
23.5
0.086
TMPG06-16A
15.2
16.8
1.0
13.6
1.0
5.0
17.8
22.5
0.086
TMPG06-18
16.2
19.8
1.0
14.5
1.0
5.0
15.1
26.5
0.088
TMPG06-18A
17.1
18.9
1.0
15.3
1.0
5.0
15.9
25.5
0.088
TMPG06-20
18.0
22.0
1.0
16.2
1.0
5.0
13.7
29.1
0.090
TMPG06-20A
19.0
21.0
1.0
17.0
1.0
5.0
14.4
27.7
0.090
TMPG06-22
19.8
24.2
1.0
17.8
1.0
5.0
12.5
31.9
0.092
TMPG06-22A
20.9
23.1
1.0
18.8
1.0
5.0
13.1
30.6
0.092
TMPG06-24
21.6
26.4
1.0
19.4
1.0
5.0
11.5
34.2
0.094
TMPG06-24A
22.8
25.2
1.0
20.5
1.0
5.0
12.0
33.2
0.094
TMPG06-27
24.3
29.7
1.0
21.8
1.0
5.0
10.2
39.1
0.096
TMPG06-27A
25.7
28.4
1.0
23.1
1.0
5.0
10.7
37.5
0.096
TMPG06-30
27.0
33.0
1.0
24.3
1.0
5.0
9.2
43.5
0.097
TMPG06-30A
28.5
31.5
1.0
25.6
1.0
5.0
9.7
41.4
0.097
TMPG06-33
29.7
36.3
1.0
26.8
1.0
5.0
8.4
47.7
0.098
TMPG06-33A
31.4
34.7
1.0
28.2
1.0
5.0
8.8
45.7
0.098
TMPG06-36
32.4
39.6
1.0
29.1
1.0
5.0
7.7
52.0
0.099
TMPG06-36A
34.2
37.8
1.0
30.8
1.0
5.0
8.0
49.9
0.099
TMPG06-39
35.1
42.9
1.0
31.6
1.0
5.0
7.1
56.4
0.100
TMPG06-39A
37.1
41.0
1.0
33.3
1.0
5.0
7.4
53.9
0.100
TMPG06-43
38.7
47.3
1.0
34.8
1.0
5.0
6.5
61.9
0.101
TMPG06-43A
40.9
45.2
1.0
36.8
1.0
5.0
6.7
59.3
0.101
Notes
(1)
Pulse test: tp  50 ms
(2)
Surge current waveform per fig. 3 and derated per fig. 2
(3)
All terms and symbols are consistent with ANSI/IEEE C62.35
(4)
TMPG06-6.8(A) thru TMPG06-9.1(A) not recommended for new design due to product be end of life on 31-May-11 per
PCN-PDD-008-2010 Rev. 0
www.vishay.com
2
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88404
Revision: 09-Feb-11
TMPG06-6.8 thru TMPG06-43A
Vishay General Semiconductor
ORDERING INFORMATION (Example)
PREFERRED P/N
UNIT WEIGHT (g)
PREFERRED PACKAGE CODE
BASE QUANTITY
DELIVERY MODE
0.218
54
5500
13" diameter paper tape and reel
TMPG06-6.8AHE3/54 (1)
Note
(1)
AEC-Q101 qualified
RATINGS AND CHARACTERISTICS CURVES
(TA = 25 °C unless otherwise noted)
150
Non-Repetitive Pulse
Waveform shown in Fig. 3
TA = 25 °C
10
TMPG06-10 - TMPG06-43A
1.0
TMPG06-6.8 - TMPG06-9.1A
TJ = 25 °C
Pulse Width (td)
is defined as the Point
where the Peak Current
decays to 50 % of IPPM
tr = 10 µs
Peak Value
IPPM
100
Half Value - IPP
IPPM
2
50
10/1000 µs Waveform
as defined by R.E.A.
td
0
1.0 µs
10 µs
100 µs
1.0 ms
10 ms
0
1.0
2.0
3.0
td - Pulse Width (s)
t - Time (ms)
Figure 1. Peak Pulse Power Rating Curve
Figure 3. Pulse Waveform
100
4.0
10 000
CJ - Junction Capacitance (pF)
Peak Pulse Power (PPP) or Current (IPP)
Derating in Percentage, %
0.1
0.1 µs
IPPM - Peak Pulse Current, % IRSM
PPPM - Peak Oulse Power (kW)
100
75
50
25
TJ = 25 °C
f = 1.0 MHz
Vsig = 50 mVp-p
Measured at
Zero Bias
1000
100
Measured at Stand-Off
Voltage VWM
10
0
0
25
50
75
100
125
150
175
200
1.0
10
100
TJ - Initial Temperature (°C)
VBR - Breakdown Voltage (V)
Figure 2. Pulse Power or Current vs. Initial Junction Temperature
Figure 4. Typical Junction Capacitance
Document Number: 88404
Revision: 09-Feb-11
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
200
www.vishay.com
3
TMPG06-6.8 thru TMPG06-43A
Vishay General Semiconductor
100
60 Hz
Resistive or
Inductive Load
TJ = 75 °C
8.3 ms Single Half Sine-Wave
Peak Forward Surge Current (A)
PD - Power Dissipation (W)
1.00
0.75
0.50
L = 0.375" (9.5 mm)
Lead Lengths
0.25
0
10
0
25
50
75
100
125
150
175
1
200
10
100
TL - Lead Temperature (°C)
Number of Cycles at 60 Hz
Figure 5. Power Derating Curve
Figure 6. Maximum Non-Repetitive Forward Surge Current
PACKAGE OUTLINE DIMENSIONS in inches (millimeters)
MPG06
0.100 (2.54)
0.090 (2.29)
DIA.
1.0 (25.4)
MIN.
0.125 (3.18)
0.115 (2.92)
1.0 (25.4)
MIN.
0.025 (0.635)
0.023 (0.584)
DIA.
www.vishay.com
4
For technical questions within your region, please contact one of the following:
[email protected], [email protected], [email protected]
Document Number: 88404
Revision: 09-Feb-11
Legal Disclaimer Notice
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Document Number: 91000
Revision: 11-Mar-11
www.vishay.com
1