For more information, please visit the product page. date 08/28/2012 page 1 of 6 SERIES: VSCP-2K4 │ DESCRIPTION: AC-DC POWER SUPPLY RoHS (Vdc) VSCP-2K4-09 9 VSCP-2K4-12 12 VSCP-2K4-15 15 VSCP-2K4-18 18 VSCP-2K4-36 ripple and noise3 efficiency max (A) max (W) max (mVp-p) typ (%) 133 / 266 2,400 90 83 100 / 200 2,400 120 84 80 / 160 2,400 150 85 66 / 133.3 2,400 150 85 24 50 / 100 2,400 150 88 36 33 / 66.6 2,400 150 88 48 25 / 50 2,400 150 89 20 / 40 2,400 150 90 O VSCP-2K4-48 60 1. output voltage is measured at output power connector 2. maximum current is measured at 100~120 V input / 200~240 V input 3. ripple and noise is measured from 10 kHz to 20 MHz at output terminals with 0.1 μF ceramic capacitor and a 22 μF electrolytic capacitor in parallel IS C Notes: output power N VSCP-2K4-24 VSCP-2K4-60 output current2 TI output voltage1 MODEL U up to 2,400 W continuous power universal input (90~260 Vac / 130~370 Vdc) single output from 9~60 V programmable output voltage active power correction (98%) current sharing capable power good, remote sense, remote on/off control built-in DC fan over load, over voltage, over temperature, and short circuit protections UL and TUV safety approvals efficiency up to 90% N • • • • • • • • • • • ED FEATURES PART NUMBER KEY VSCP-2K4 - XX Base Number D Output Voltage cui.com For more information, please visit the product page. CUI Inc │ SERIES: VSCP-2K4 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 2 of 6 INPUT conditions/description min voltage frequency current max units 90 130 260 370 Vac Vdc 47 63 Hz at 230 Vac inrush current power factor correction at 230 Vac, full load conditions/description min 0 ~ 50°C 230 Vac at full load A typ max units ±1 % ±1 % ±0.04 %/°C 12 ms -8 +3 % 25 100 % N temperature coefficient A 180 U line regulation load regulation hold-up time 13.5 0.98 OUTPUT parameter typ ED parameter adjustable with built-in trim pot programming output voltage programmable through external 1 ~ 5 V control voltage on VCI. Control voltage can also be obtained from VCO via a 470 KΩ pot. see application diagrams remote sense Designated as (VS+) and (VS-). Total voltage compensation from cable losses with respect to the main output. remote inhibit Designated as (INH), requires a low signal to inhibit the output. current sharing Designated as (PAR), use in parallel for forced current sharing function. TI adjustability N PROTECTION parameter conditions/description over voltage protection Notes: current limiting 3 times with auto recovery before shutdown max units 110 typ 135 % 115 130 % O over current protection1 min 1. Protection mode sends a pulse, waits 1.5 seconds, sends second pulse, waits 3 seconds, sends third pulse, waits 5 seconds. If overload is still present, the unit will shutdown. IS C SAFETY & COMPLIANCE parameter conditions/description min typ safety approvals TUV EN 60950, UL/cUL 1950 EMI/EMC EN 55022, EN 61000-4-(2,3,4,5,6,8,11), EN 61000-3-(2,3), ENV50204 leakage current at 240 Vac RoHS compliant yes max units 10.5 mA ENVIRONMENTAL conditions/description operating temperature see derating curves max units 0 65 °C storage temperature -20 85 °C operating humidity 20 90 % storage humidity 10 95 % 2 G D parameter vibration min 10~200Hz, 10min/cycle, 60 min for each axis cui.com typ For more information, please visit the product page. CUI Inc │ SERIES: VSCP-2K4 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 3 of 6 MECHANICAL parameter conditions/description min typ weight max 8.9 332 x 212 x 123.9 (13.071 x 8.346 x 4.878 mm) MECHANICAL DRAWING 332.00 13.071 5XM4X0.7 TERMINAL BLOCK FOR AC INPUT 8-M3X0.5 TERMINAL BLOCK FOR CONTROL SIGNAL N 6-M6 SCREW FOR DC OUTPUT O 320.00 12.598 IS C 4-M4X0.7 MOUNTING HOLE FOR USER TI N 212.00 8.346 6.00 0.236 inch U units: mm[inch] tolerance: ±1.0mm unless otherwise specified 123.90 4.878 Kg ED dimensions units 30.00 1.181 LOGIC CONNECTOR 180.00 7.087 INH 2 GND return, output ground 3 PAR current sharing, parallel function 4 PG power good signal 5 VCO reference output voltage (5.1 Vdc) to be used for output programming 6 VCI command input voltage for output programming cui.com remote on/off, remote inhibit 7 VS(-) remote sense (-) 8 VS(+) remote sense (+) 24.00 0.945 D 290.00 11.417 1 For more information, please visit the product page. CUI Inc │ SERIES: VSCP-2K4 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 4 of 6 Load (%) ≈ 100 ED DERATING CURVES 80 60 50 40 ≈ U 20 -25 0 10 20 30 40 50 60 70 N Ambient Temperature (°C) O VSCP-2K4 VSCP-2K4 IS C D Optional N Standard TI WIRING CONFIGURATIONS Optional Optional VSCP-2K4 VSCP-2K4 cui.com For more information, please visit the product page. CUI Inc │ SERIES: VSCP-2K4 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 5 of 6 D IS C O N TI N U ED LOGIC CONNECTIONS cui.com For more information, please visit the product page. CUI Inc │ SERIES: VSCP-2K4 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 6 of 6 REVISION HISTORY rev. description date 08/20/2007 initial release applied new spec template 1.02 applied new spec template, corrected over current protection 09/26/2011 1.03 spec updated 02/13/2012 1.04 V-Infinity branding removed ED 1.0 1.01 08/07/2008 08/28/2012 D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.