For more information, please visit the product page. date 08/28/2012 page 1 of 6 SERIES: VSCP-600 │ DESCRIPTION: AC-DC POWER SUPPLY U up to 600 W continuous power universal input (90~260 Vac / 130~370 Vdc) single output from 5~60 V programmable output voltage active power correction (98%) current sharing capable remote sense, remote on/off control built-in DC fan over load and over voltage protections UL and TUV safety approvals efficiency up to 90% RoHS (Vdc) 5 VSCP-600-09 9 VSCP-600-12 12 VSCP-600-15 15 VSCP-600-18 VSCP-600-24 VSCP-600-60 efficiency max (A) max (W) max (mVp-p) typ (%) 80/100 500 50 78 44 / 66 600 90 83 33 / 50 600 120 84 26 / 40 600 150 85 18 22 / 33.3 600 150 85 16 / 25 600 150 88 36 11 / 16.6 600 150 88 48 8 / 12 600 150 89 60 6 / 10 600 150 90 1. output voltage is measured at output power connector 2. maximum current is measured at 100~120 V input / 200~240 V input 3. ripple and noise is measured from 10 KHz to 20 MHz at output terminals with 0.1 μF ceramic capacitor and a 22 μF electrolytic capacitor in parallel IS C Notes: ripple and noise3 24 O VSCP-600-36 VSCP-600-48 output power N VSCP-600-05 output current2 TI output voltage1 MODEL N • • • • • • • • • • • ED FEATURES PART NUMBER KEY VSCP-600 - XX Base Number D Output Voltage cui.com For more information, please visit the product page. CUI Inc │ SERIES: VSCP-600 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 2 of 6 INPUT conditions/description min voltage frequency current at 230 Vac inrush current at 230 Vac, cold start power factor correction at 230 Vac, full load max units 90 130 260 370 Vac Vdc 47 63 Hz conditions/description 0 ~ 50°C 230 Vac at full load A 60 A min typ max ±0.04 U temperature coefficient hold-up time 3.5 0.98 OUTPUT parameter typ ED parameter %/°C 12 ms +3 % 100 % adjustable with built-in trim pot programming output voltage programmable through external 1 ~ 5 V control voltage on VCI. Control voltage can also be obtained from VCO via a 470 KΩ pot. see application diagrams remote sense Designated as (VS+) and (VS-). Total voltage compensation from cable losses with respect to the main output. remote inhibit Designated as (INH), requires a low signal to inhibit the output. current sharing Designated as (PAR), use in parallel for forced current sharing function. N adjustability 25 TI PROTECTION parameter conditions/description min N over voltage protection typ 110 max units 135 % current limiting 3 times with auto recovery before shutdown over current protection1 1. Protection mode sends a pulse, waits 1.5 seconds, sends second pulse, waits 3 seconds, sends third pulse, waits 5 seconds. If overload is still present, the unit will shutdown. O Notes: -12 units SAFETY & COMPLIANCE parameter min EMI/EMC typ max units 3.5 mA TUV EN60950, UL/cUL 1950 IS C safety approvals conditions/description EN 55022, EN 61000-4-(2,3,4,5,6,8,11), EN 61000-3-(2,3), ENV50204 leakage current at 240 Vac RoHS compliant yes ENVIRONMENTAL parameter conditions/description min max units 0 50 °C storage temperature -20 85 °C operating humidity 20 90 % D operating temperature storage humidity vibration for 60 minutes, each axis cui.com typ 10 95 % 10 200 Hz For more information, please visit the product page. CUI Inc │ SERIES: VSCP-600 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 3 of 6 Load (%) ≈ 100 ED DERATING CURVES 80 60 50 40 ≈ U 20 -25 0 10 20 30 40 50 60 70 N Ambient Temperature (°C) parameter TI MECHANICAL conditions/description weight O N 11.42 x 4.72 x 2.66 (290 x 120 x 67.5 mm) D IS C dimensions min cui.com typ 2.3 max units Kg inch For more information, please visit the product page. CUI Inc │ SERIES: VSCP-600 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 4 of 6 MECHANICAL DRAWING D IS C O N TI N U ED units: mm[inch] tolerance: ±1.0mm unless otherwise specified LOGIC CONNECTOR 1 INH inhibit / remote on-off 2 GND return / output ground 3 PAR current sharing / parallel function 4 FAL power failure detected 5 VCO 5~10 Vdc reference for output programming 6 VCI command input voltage for output programming 7 VS- output voltage remote sense- 8 VS+ output voltage remote sense+ cui.com For more information, please visit the product page. CUI Inc │ SERIES: VSCP-600 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 5 of 6 D IS C O N TI N U ED LOGIC CONNECTIONS cui.com For more information, please visit the product page. CUI Inc │ SERIES: VSCP-600 │ DESCRIPTION: AC-DC POWER SUPPLY date 08/28/2012 │ page 6 of 6 REVISION HISTORY description date 1.0 initial release 07/24/2006 1.01 new template applied, V-Infinity branding removed ED rev. 08/28/2012 D IS C O N TI N U The revision history provided is for informational purposes only and is believed to be accurate. Headquarters 20050 SW 112th Ave. Tualatin, OR 97062 800.275.4899 Fax 503.612.2383 cui.com [email protected] CUI offers a two (2) year limited warranty. Complete warranty information is listed on our website. CUI reserves the right to make changes to the product at any time without notice. Information provided by CUI is believed to be accurate and reliable. However, no responsibility is assumed by CUI for its use, nor for any infringements of patents or other rights of third parties which may result from its use. CUI products are not authorized or warranted for use as critical components in equipment that requires an extremely high level of reliability. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness.