4278EX/4278EX-SN MULTIPLEX QUAD AP PIR MOTION DETECTOR It makes sense to use Honeywell’s smart motion Honeywell alarm system that supports Multiplex detectors for multiplex systems. Not only are they Addressing, including the VISTA-40, VISTA-50, 4140XMP, smarter than ever, but they provide the opportunity to and VISTA-100. The 4278EX may also be used with the reduce your overall installation costs! 5140XM. Whether it’s a commercial or residential The 4278EX and 4278EX-SN can be used with any installation, these sensors offer many benefits. FEATURES • Built-in Remote Point Module with Point ID identifies the exact location of the intruder with either a DIP Switch Address (4278EX) or a Serial Number Address as distinctive as a fingerprint (4278EX-SN) • Honeywell’s unique two-wire multiplex reduces installation costs over conventional four-wire hardwire and multiplex approaches by reducing both wire costs and the number of connections • Extra Contact Loop • Honeywell’s patented Global Polling technology senses alarms up to eight times faster than conventional multiplex • Super low current, reduces power and battery requirements on large installations • DIP Switch (4278EX) or Serial Number (4278EX-SN) • 40ft. x 50ft. Coverage • Quad AP Processing for Improved False Alarm Immunity • Built-In Remote Point Module • Six Year Warranty • Tamper 4278EX/4278EX-SN MULTIPLEX QUAD AP PIR MOTION DETECTOR SPECIFICATIONS: • Detection Method: - Passive Infrared • Mounting: - 7' (2.1m) nominal • Coverage: - 40' x 50' (12.2m x 15.2m) (wide angle mirror) 80' x 7.5' (24.4m x 2.3m) (long range/curtain mirror) • Indicators: - Red LED with enable/disable switch Protection Patterns WIDE ANGLE MIRROR • Detection Pattern: - 12 zones - seven main, four intermediate, One downward (wide angle mirror) 1 zone, seven tiers (long range/curtain mirror) • Pulse Count: - Signal processing/instant response (installer selectable) • Detectable Walk Rate: - 0.5-5 ft/sec (0.15-1.5m/sec) • Input Voltage: - 8-11V peak at polling loop terminals TOP VIEW MAIN 20 ft. (6.1m) INTERMEDIATE DOWNWARD 10 ft. (3.0m) 0 • Current: - Less than 1mA (LED) inactive, 9mA approx. (LED active) 10 ft. (3.0m) DETECTOR 20 ft. (6.1m) • Operating Temp: - 32° to 122°F (0° to 50°C) • Operating Humidity: - Up to 95% RH (max.), non-condensing • Dimensions: - 3 1/4"W x 4 5/8"H x 2"D (85mm x 120mm x 50mm) 10 ft. (3.0m) 20 ft. (6.1m) 30 ft. (9.1m) 40 ft. (12.2m) SIDE VIEW MAIN DETECTOR DOWNWARD 7 ft. INTERMEDIATE (2.1m) MAIN 0 APPROX. 4 ft. (1.2m) DEAD ZONE 10 ft. (3.0m) 20 ft. (6.1m) 30 ft. (9.1m) 40 ft. (12.2m) LONG RANGE MIRROR TOP VIEW 7 ft. 5 in. (2.3m) 10 ft. (3.0m) 40 ft. (12.2m) 80 ft. (24.4m) SIDE VIEW 7 ft. (2.1m) 2.3 ft. (0.7m) ORDERING 4278EX Multiplex Quad AP PIR Motion Detector 4278EX-SN Alternate Polarity Quad PIR Motion Detector for Serial Number Addressable Polling Loops Honeywell Security & Custom Electronics Honeywell 2 Corporate Center Dr. Suite 100 P.O. Box 9040 Melville, NY 11747 www.honeywell.com L/4278EX/D August 2007 © 2007 Honeywell International Inc. 80 ft. (24.4m)