VISTA®-128FBP/V128FBP-24 COMMERCIAL PARTITIONED FIRE AND BURGLARY ALARM CONTROL PANEL Now UL864 9th Edition Approved The new VISTA-128FBP provides the ultimate protection of initiating devices, notification circuits, communication devices, life and property. This UL Listed commercial fire and burglary keypads, RF receivers and relays are also supported. The control panel supports up to eight partitions and up to 128 VISTA-128FBP has been designed to mount quickly and zones/points using hardwired, wireless and V-Plex easily in an attack resistant cabinet, and is available in 12V addressable technologies. A diverse line of Honeywell and 24V models. ® FEATURES • Eight hardwired zones standard, expandable to 120 V-Plex addressable points/zones or 128 wireless points/zones • Can control eight separate areas independently (8 partitions) • Supports commercial wireless fire and burglary devices • Stores up to 512 events • Accommodates 150 user codes and up to 250 access card holders using VISTAKEY® • Supports V-Plex addressable VISTAKEY access control (1 to 8 doors) • Two on-board notification (bell) circuits delivering 2.3A @ 12V • Automatic smoke detector sensitivity maintenance testing • Four-wire smoke reset using onboard J2 output trigger • Supports Dynamic Signaling for AlarmNet Communicators • Supports Internet and GSM alarm reporting* • Supports graphical user interfaces for burglary use • Supports 6160CR-2 multi-LED fire keypad • Listed to UL864 9th Edition • Upload/download via Ethernet* • Carbon monoxide (CO) zone support * When used with AlarmNet devices. VISTA®-128FBP/V128FBP-24 COMMERCIAL PARTITIONED FIRE AND BURGLARY ALARM CONTROL PANEL ADDITIONAL FEATURES • Notification Appliance Circuits (two): - Programmable - Temporal code compliant - Individually silenceable • Programmable on-board auxiliary relay • False alarm reduction features: - Exit error logic - Exit delay reset - Cross zoning - Call waiting defeat - Recent close report • Supports commercial hardwired, addressable V-Plex® polling loop and wireless zones • Hardwired zones - Individually assignable to any of eight partitions - Up to 16 two-wire smoke detectors each on zone one and two (32 total) - Up to 50 two-wire glassbreak detectors on zone eight • Patented addressable V-Plex polling loop technology - Supports 120 two-wire zones points - Global polling technology for faster processing - Supervised by panel - Zones individually assignable to partitions, notification circuit (bell) output or auxiliary relay - 4,000 ft. capability without the use of shielded cable - Provides eight style B hardwired zones - Extender/Isolation bus modules - EOLR supervised for Fire and UL burglary installations- Supports N.O. or N.C sensors - Eight zone - Class A and B expander module - Eight zone - Class B expander module - Single-zone supervised contact module • UL Listed wireless expansion - Supports up to 128 wireless zones/points - Supervised by control for check-in signals - Tamper protection for transmitters - Individually assignable up to eight partitions - Supports commercial wireless smoke detectors • Up to eight doors using VISTAKEY V-Plex Access Control • Event reporting • Local printer for event log printing • Communication - Phone line, GSM and IP communicator support - Panel operation during download SPECIFICATIONS Applications Main Dialer Agency Listings The VISTA-128FBP control is well suited for a variety of applications as an integrated fire and burglary control. Some of the applications supported are: medical and professional buildings, churches or synagogues, office buildings, schools, strip malls, larger residences and factory or warehouse environments. • Line seize: Double Pole • UL609 Grade A Local Mercantile Premises and Mercantile Safe and Vault Electrical • Primary power: 18VAC @ 72VA Honeywell No. 1451 • Control panel quiescent current draw: 300mA • Backup battery: - 12VDC, 12AH min to 34.4AH max - Lead acid battery (gel type) • Alarm power: 12VDC, 1.7A max for each notification (bell) circuit output Total 2.3A 12V • Aux. standby pwr: 12VDC, 1A max • Total power: 2.3A at 12VDC • Standby time: 24 hours with 1A standby load using 34.4AH battery • Fusing: Battery input, aux. and notification (bell) circuit outputs are protected using PTC circuit protectors. All outputs are power limited. • Optional 24-volt kit • Ringer equiv: 0.7B • Formats: ADEMCO® Low Speed, ADEMCO 4+2 Express, ADEMCO High Speed, ADEMCO Contact ID, Sescoa and Radionics Backup Communication • Dual phone line capability using 5140DLM module • AlarmNet® GSM, i-GSM and IP Communicators Cabinet Dimensions • 18" H x 14.5" W x 4.3"D Environmental • Storage temp: 14° F to 158° F (-10° C to 70° C) • Operating temp: 32° F to 122° F (0° C to 50° C) • Humidity: 85% RH • EMI: Meets or exceeds the following requirements: - FCC Part 15, Class B Device - FCC Part 68 - IEC EMC Directive • UL611/1610 Grades A, AA, Central Station • UL365 Grades A, AA Police Connect • UL864/NFPA72 Local, Central Station and Remote Station • UL985 • Factory Mutual • California State Fire Marshal • MEA • CAN/ULC S304 – Central and Monitoring Station Burglar Alarm Unit • CAN/ULC S527 – Central Unit for Fire Alarm Systems • CAN/ULC S303 – Local Burglar Alarm Unit • CAN/ULC S525 – Audible Signal Appliances VISTA®-128FBP/V128FBP-24 COMMERCIAL PARTITIONED FIRE AND BURGLARY ALARM CONTROL PANEL COMPATIBLE DEVICES Auxiliary Devices • 4208SNF Class A/B Expander Module • 6160CR-2 - Red Fire Keypad • 4190SN Remote Point Module two zones • 6160 - Burglary Keypad • 4204 - Relay Module, four form • 4204CF - Two supervised output circuits • 5881 Series RF receiver 4100SM serial module • 5817CB - Wireless Commercial Transmitter V-Plex Extender/Isolation Modules • 5869 - Hold-Up Transmitter • 4297 Extender/Isolator Module • 5881ENHC - RF Receiver • VSI Isolator Module • 5883H - RF Receiver • 5883H RF receiver • 6220S - System printer used with Detector • 5809 - Wireless Heat Detector • 4193SN and 4193SNP Two-zone Expander Modules C contacts • 5806W3 - Photoelectric Smoke V-Plex Smoke Detectors Access Control • 5193SD • VISTAKEY® V-Plex (addressable) Access Control • 5193SDT Two-Wire Smoke Detectors • VISTAKEY-SK Starter Kit Conventional V-Plex Passive Infrared Detectors • System Sensor • 998MX • ESL • IS2500SN • DSC • DT7500SN • 7845i-ENT - Internet/Intranet Horn/Strobes V-Plex (Addressable) Contacts • 7845GSM - Digital Cellular • VISTAKEY-EX Expansion Kit Alarm Communications Communicator • System Sensor • 4939SN-WH • Wheelock • 4944SN-WH • Gentex • 4959SN Communicator • 7845i-GSM - Internet and Digital Cellular Communicator Manual Pull Stations V-Plex Glassbreak Detectors • 5140MPS-1 • FG1625SN • 5140MPS-2 Optional 24V Kit V-Plex (Addressable) Devices • Order number: V128FBP924KT • 4208U Universal Eight-zone Expansion Commercial Wireless Devices Module • GSMCF/iGSMCF - Commercial Fire Communication Kits (when available) • IPGSM-DP Internet and Digital Cellular Communicator • 5808W3 - Photoelectric Smoke/Heat • 4101SN Single Relay/Zone Module Detector Product specifications subject to change. ORDERING V128FBP-9 V128FBP9-24 Commercial Fire and Partitioned Burglary Alarm Control Panel 12V Model Commercial Fire and Partitioned Burglary Alarm Control Panel 24V Model For more information: www.honeywell.com/security Automation and Control Solutions Honeywell Security Products Americas 2 Corporate Center Dr. Suite 100 P.O. Box 9040 Melville, NY 11747 1.800.467.5875 www.honeywell.com L/VSTA128FBPD/D September 2012 © 2012 Honeywell International Inc.