T9 www.vishay.com Vishay Sfernice 3/8" Square Multi-Turn Fully Sealed Container Cermet Trimmer FEATURES • Military and professional grade • 0.5 W at 70 °C • Product qualification according to CECC 41101-004 (A, B, C, D, E) • Tests according to CECC 41000 or IEC 60393-1 • GAM T1 • Fully sealed • Operating temperature range -55 °C to +155 °C • Wide ohmic range from 10 to 2.2 M • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters (± 0.5 mm) T9XA (PM81A) A 9.8 max 5±1 5 max 2.3 ± 0.2* a b c 2.54 2.54 Terminal Spacing on a 2.54 PCB ø 0.5 a b c 9.7 max 1.3 0.5 ø 2.2 slot 0.6 x 0.6 1.2 ± 0.2 7.9 ± 0.2 T9XB (PM81B) C 9.8 max 0.6 ± 0.2* 5±1 2.54 a b c 2.54* 2.54* 5 max ø 0.5 a b c 9.7 max 1.3 0.5 ø 2.2 1.2 ± 0.2 slot 0.6 x 0.6 7.9 ± 0.2 T9YA (PM82A) B 2.3 ± 0.2* 1.3 9.8 max 1.2 ± 0.1 5±1 ø 2.2 a b c 2.54* 2.54* 1.6 ± 0.1 a b c 1.6 ± 0.1 a b c 9.7 max ø 0.5 slot 0.6 x 0.6 0.5 5 max 0.6 ± 0.2* T9YB (PM82B) D 1.3 9.8 max 1.2 ± 0.1 5±1 2.54 ø 2.2 2.54* 2.54* a b c 9.7 max ø 0.5 slot 0.6 x 0.6 5 max 0.5 4.8 ± 0.2* T9Z (PM83) E 5.2 max 5±1 2.54* c b a 9.7 max slot 0.6 x 0.6 2.54* 2.54* ø 0.5 c b a Base level ø 2.2 0.5 1.3 1.3 ± 0.1 1.2 ± 0.1 9.7 max Note (1) To be measured at base level Revision: 17-Dec-15 Document Number: 51025 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T9 www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 21 turns ± 2 10 to 2.2 M Resistance range Standard series E3 Tolerance 1 - 2.2 - 4.7 and on request 1 - 2 - 5 Standard 10 % On request 5% Linear 0.5 W at +70 °C Power rating POWER IN W 0.5 0 0 25 50 70 125 100 155 AMBIENT TEMPERATURE IN °C c a Circuit diagram (3) (1) cw b (2) Temperature coefficient Limiting element voltage (linear law) Contact resistance variation End resistance (typical) See Standard Resistance Element table 250 V 2 % Rn or 2 1 Dielectric strength (RMS) 1000 V Insulation resistance (500 VDC) 106 M MECHANICAL SPECIFICATIONS Mechanical travel Operating torque (max. Ncm) End stop torque Net weight Wiper (actual travel) Terminals 23 turns ± 5 1.5 Clutch action Approx. 0.82 g Positioned at approx. 50 % Pure Sn (code e3) ENVIRONMENTAL SPECIFICATIONS Temperature range Climatic category Sealing Revision: 17-Dec-15 -55 °C to +155 °C 55/125/56 Fully sealed - IP67 Document Number: 51025 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T9 www.vishay.com Vishay Sfernice PERFORMANCES CECC 41100 REQUIREMENTS TYPICAL VALUES AND DRIFTS CONDITIONS RT/RT (%) R1-2/R1-2 (%) RT/RT (%) R1-2/R1-2 (%) Phase A dry heat 125 °C Phase B damp heat Phase C cold -55 °C Phase D damp heat 5 cycles ±2% ±3% ± 0.5 % ±1% Long term damp heat 56 days 40 °C, 93 % RH ±2% Dielectric strength: 700 V Insulation resistance: > 100 M ±3% ± 0.5 % Dielectric strength: 1000 V Insulation resistance: > 104 M ±1% Rotational life 200 cycles ±2% Contact res. variation: < 3 % Rn - ±2% Contact res. variation: < 1 % Rn - 1000 h at rated power 90'/30' - ambient temp. 70 °C ±2% Contact res. variation: < 3 % Rn ±3% ±1% Contact res. variation: < 1 % Rn ±2% 5 cycles -55 °C to +125 °C ± 1.5 % V1-2/V1-3 ±1% ± 0.5 % V1-2/V1-3 <±1% 50 g at 11 ms 3 successive shocks in 3 directions ±1% ±2% ± 0.1 % ± 0.2 % 10 Hz to 55 Hz 0.75 mm or 10 g during 6 h ±1% V1-2/V1-3 ±2% ± 0.1 % V1-2/V1-3 < ± 0.2 % TESTS Climatic sequence Load life Rapid temp. change Shock Vibration Note • Nothing stated herein shall be construed as a guarantee of quality or durability. STANDARD RESISTANCE ELEMENT DATA STANDARD RESISTANCE VALUES LINEAR LAW TYPICAL TCR MAX. MAX. MAX. CUR. POWER WORKING THROUGH -55 °C TO +125 °C AT 70 °C VOLTAGE WIPER W V mA 10 22 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.28 0.13 0.06 0.028 2.2 3.3 4.8 7 10.5 15.3 22.4 33.2 48.5 70.7 105 153 224 250 250 250 250 224 150 103 70 47 32 22 15 10 7 4.8 3.2 2.2 1.1 0.53 0.25 0.11 47 100 220 470 1K 2.2K 4.7K 10K 22K 47K 100K 220K 470K 1M 2.2M Revision: 17-Dec-15 ppm/°C MARKING • Vishay trademark • Model • Style • Ohmic value (in , k, M) • Tolerance (in %) • Manufacturing date • Marking of terminal 3 ± 100 PACKAGING • In tube of 50 pieces code T20 (TU50) Document Number: 51025 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 T9 www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) T 9 X A 4 7 4 K T 2 0 Model STYLE OHMIC VALUE TOLERANCE PACKAGING T9 XA XB YA YB Z From 10 to 2.2 M 474 = 470 k K = 10 % on request J = 5 % T20 = tube 50 pieces SPECIAL NUMBER (If applicable) Given by Vishay for custom design DESCRIPTION (for information only) T9 XA 470K 10 % MODEL STYLE VALUE TOLERANCE TU SPECIAL PACKAGING e3 SPECIAL LEAD FINISH RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 17-Dec-15 Document Number: 51025 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000