P10L www.vishay.com Vishay Sfernice Long Life Potentiometer - 500 000 Cycles Miniature - Cermet - Fully Sealed FEATURES • 500 000 cycles • Cermet element • Low temperature coefficient (± 150 ppm/°C typical) • Plastic housing and shaft • Compact (3/8" square) • Fully sealed • Test according to CECC 41000 or IEC 60393-1 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DIMENSIONS in millimeters (inches) ± 0.5 mm (± 0.02") P10L: Side Adjust P10L: Top Adjust 5.2 (0.20) 9.6 (0.38) 3 x Ø 0.5 (0.02) 5.5 (0.22) 2.54 (0.10) 3 x Ø 0.5 (0.02) 3 2 1 1.15 (0.05) 5.5 (0.22) 4 min. (0.16) 2.54 (0.10) 9.6 (0.38) AI = 20 (0.79) AG = 16 (0.63) Ø3 (0.12) 2.54 (0.10) Ø3 (0.12) 9.7 (0.38) P10LXX 9.7 (0.38) 5.3 (0.21) M6 x 0.75 M6 x 0.75 1 (0.04) 1 (0.04) 4 min. (0.16) 0.6 (0.02) 0.6 (0.02) 3 1 P10LYP 2.54 (0.10) 2.54 (0.10) P10LXC 3 2 1 2.54 (0.10) 2 5.2 5.3 (0.20) (0.21) 2.7 (0.11) AI = 20 (0.79) AG = 16 (0.63) 2.54 (0.10) 2 P10LYE 2.54 (0.10) 2.54 (0.10) 1 3 4.85 (0.19) 2.54 (0.10) 2.54 (0.10) 2.54 (0.10) 3 1 5.08 (0.20) P10LYM 2 2.54 (0.10) Revision: 12-May-16 2.54 (0.10) 2.25 (0.09) Document Number: 51057 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P10L www.vishay.com Vishay Sfernice ELECTRICAL SPECIFICATIONS Resistive element Cermet Electrical travel 250° ± 15° Standard resistance values 1 k - 5 k - 10 k - 50 k Tolerance 20 % - 10 % on request A OUTPUT VOLTAGE RATIO (%) Linear Taper 100 80 60 A 40 20 0 0 20 40 60 80 100 % CLOCKWISE SHAFT ROTATION Circuit diagram a c (1) (3) cw b (2) Power rating POWER IN W 0.1 0.1 W at 70 °C 0 0 20 40 60 70 80 100 120 140 AMBIENT TEMPERATURE IN °C Standard resistance element data Temperature coefficient (typical) Limiting element voltage End resistance (typical) Resistance Value (k) Max. Power at 70 °C (W) 1 0.1 10 5 0.1 22.3 10 0.1 31.6 50 0.1 70.7 ± 150 ppm/°C 75 V 1 Dielectric strength (RMS) 1000 V Insulation resistance (300 VDC) 106 M Independent linearity (typical) ±5% Revision: 12-May-16 Max. Working Voltage (V) Document Number: 51057 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P10L www.vishay.com Vishay Sfernice MECHANICAL SPECIFICATION Mechanical travel 290° ± 5 Operating torque (typical) 2 Ncm max. 2.83 oz.-inch max. End stop torque 7 Ncm max. 9.9 oz.-inch max. Tightening torque of mounting nut 25 Ncm max. 2.2 lb-inch max. Unit weight 3.5 10-2 oz. 1g Terminals e3: Pure Sn ENVIRONMENTAL SPECIFICATIONS Temperature range -40 °C to +100 °C Climatic category 40/100/56 Sealing Fully sealed - Container IP67 MARKING • • • • • • Vishay trademark Model Ohmic value code Tolerance code Manufacturing date code Marking of terminals 3 APPLICATION NOTE c (3) The potentiometer shall be used in voltage divider with an impedance load at least 100 times higher than the total potentiometer nominal resistance value. Advised load impedance: 1 M min. for resistance range of 1k to 50 k cw Vin Z> 1 MΩ (2) b Vout (1) a PERFORMANCES TESTS CONDITIONS TYPICAL VALUES AND DRIFTS RT/RT (%) R1-2/R1-2 (%) OTHER Electrical endurance 1000 h at rated power 90’/30’ - ambient temp. 70 °C ± 20 % ± 20 % - Climatic sequence Phase A dry heat 100 °C Phase B damp heat Phase C cold -40 °C Phase D damp heat 5 cycles ±1% ±2% - Damp heat, steady state 56 days 40 °C 93 % HR ±1% ±2% Insulation resistance: > 104 M Change of temperature 5 cycles -40 °C at 100 °C ±1% ±2% - Mechanical endurance 500 000 cycles at rated power Turn angle: ± 50° Temperature: 20 °C ± 20 % - Independent linearity: ± 20 % 50 g’s at 11 ms 3 successive shocks in 3 directions ± 0.5 % ±1% - 10 Hz to 55 Hz 0.75 mm or 10 g’s during 6 h ± 0.5 % ±1% - Shock Vibration Note • Nothing stated herein shall be construed as a guarantee of quality or durability. Revision: 12-May-16 Document Number: 51057 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 P10L www.vishay.com Vishay Sfernice ORDERING INFORMATION (part number) P 1 0 L X X A G 1 0 2 M B 4 MODEL STYLE SHAFT RESISTANCE CODE TOLERANCE CODE PACKAGING CODE P10L XC XX YE YM YP AG = Ø 3 mm to 16 mm Al = Ø 3 mm to 20 mm 102 = 1 k 502 = 5 k 103 = 10 k 503 = 50 k M = 20 % B4 = box 100 pieces On request: K = 10 % SPECIAL NUMBER (if applicable) Given by Vishay for custom design PART NUMBER DESCRIPTION (for information only) P10L XX AG 1K 20 % MODEL STYLE SHAFT VALUE TOLERANCE SPECIAL BO100 e3 PACKAGING LEAD (Pb)-FREE RELATED DOCUMENTS APPLICATION NOTES Potentiometers and Trimmers www.vishay.com/doc?51001 Guidelines for Vishay Sfernice Resistive and Inductive Components www.vishay.com/doc?52029 Revision: 12-May-16 Document Number: 51057 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000