T11 Datasheet

T11
www.vishay.com
Vishay Sfernice
12.5 mm Square Modular Cermet Trimmer
FEATURES
• Knob included
• 0.5 W at 70 °C
• Industrial grade
• Up to 5 modules
• Switches and detents available
• Tests according to CECC 41000 or IEC 60393-1
• Available in conductive plastic
• High rotational life up to 2000 cycles
• X and Y styles
• Material categorization: for definitions of compliance
please see www.vishay.com/doc?99912
DIMENSIONS in millimeters (± 0.5 mm)
T11X
12.5
4.5
9
0.6 deep 1
0.8 max.
1 x deep 1
12.5
Ø 12.5
14
9.5
7 ± 0.2
a
(1)
5.08
b
(2)
c
(3)
6 min.
0.3 x 0.9
0.7
5.08
1.7
5.08 5.08
T11Y
9.8
12.7
5.08 5.08
Revision: 23-Sep-15
Document Number: 51021
1
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T11
www.vishay.com
Vishay Sfernice
ELECTRICAL SPECIFICATIONS
Resistive element
Cermet
Electrical travel
270° ± 10°
22  to 4.7 M
Resistance range
Standard series E3
Standard
Tolerance
Power rating
1 - 2.2 - 4.7 and on request 1 - 2 - 5
± 20 %
On request
± 5 % or ± 10 %
Linear
0.5 W at +70 °C
Logarithmic laws, L, F, or S and
ganged elements
0.25 W at +70 °C
Power rating chart
POWER IN W
0.75
0.50
0.25
0
0
40
20
60 70 80
125 140
100
AMBIENT TEMPERATURE IN °C
Circuit diagram
a
c
(1)
(3)
cw
b
(2)
90 %
F
Resistance laws
S
A
Vs
50 %
Ve %
10 %
L
α = β = 15° ± 5°
β
α
25 % 50 %
75 %
Electrical travel 270°
Mechanical travel 300°
Temperature coefficient (for Rn  100 ) (typical)
Limiting element voltage
Contact resistance variation
End resistance (typical)
Independent linearity (typical)
Middle keying point (C V1M typical)
Insulation resistance
Dielectric strength (RMS)
± 100 ppm/°C
350 V
2 % Rn or 3  (linear law)
2
± 3 % (linear law)
±3%
106 M (500 VDC)
1500 VRMS
MECHANICAL SPECIFICATIONS
Mechanical travel
End stop torque (max. Ncm)
Mechanical life
Terminals
300° ± 5°
35
2000 cycles
Pure Sn (code e3)
Note
• Nothing stated herein shall be construed as a guarantee of quality or durability.
Revision: 23-Sep-15
Document Number: 51021
2
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
T11
www.vishay.com
Vishay Sfernice
ENVIRONMENTAL SPECIFICATIONS
Temperature range
-55 °C to +125 °C
Climatic category
55/125/56
Sealing
Enables cleaning IP64
MARKING
•
•
•
•
•
•
Vishay trademark
Model
Ohmic value (in , k, M)
Tolerance (in %)
Manufacturing date
Marking of terminal 3
PACKAGING
Style Y
• Carton box of 45 pieces, code B24/BO45
Style X
• Carton box of 80 pieces, code B28/BO80
ORDERING INFORMATION (part number)
T
1
1
X
4
7
0
M
A
B
2
8
Model
STYLE
OHMIC VALUE
TOLERANCE
TAPER
PACKAGING
T11
X
Y
From
22  to 4.7 M
103 = 10 k
M = 20 %
On request
K = 10 %
J=5%
A
L
F
S
Style X
B28 = box 80 pieces
Style Y
B24 = box 45 pieces
SPECIAL
NUMBER
(If applicable)
Given by
Vishay
for custom
design
DESCRIPTION (for information only)
T11
X
470U
20 %
A
MODEL
STYLE
VALUE
TOLERANCE
TAPER
SPECIAL
BO
e3
PACKAGING
LEAD FINISH
RELATED DOCUMENTS
APPLICATION NOTES
Potentiometers and Trimmers
www.vishay.com/doc?51001
Guidelines for Vishay Sfernice Resistive and Inductive Components
www.vishay.com/doc?52029
Revision: 23-Sep-15
Document Number: 51021
3
For technical questions, contact: [email protected]
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Legal Disclaimer Notice
www.vishay.com
Vishay
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please
contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free
requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference
to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21
conform to JEDEC JS709A standards.
Revision: 02-Oct-12
1
Document Number: 91000