Document Number V-70045B Analog Output Semiconductor Pressure Sensor AP2 Series Description The AP2 pressure sensor series is composed of a silicon piezoresistive pressure sensing chip and a signal conditioning integrated circuit. The low-level signal from the sensing chip is amplified, temperature compensated, calibrated and finally converted to a high level analog output voltage that is proportional with the applied pressure. The AP2 series measures gauge pressure. AP2*N Features Applications Amplified and temperature compensated analog output High accuracy ±1.5 %FS Supply voltage 3.0, 3.3 & 5.0 Vdc Low supply current Max 2 mA at 3.3 Vdc Operating temperature -40 to 125℃ Wide compensated temperature 0 to 85℃ Pins & Package compatible with Fujikura’s XFPM integrated pressure sensor Customization available AP2*R Battery-operated Devices Medical Devices Industrial Pneumatic Devices Consumer Devices RoHS Compliant Device Lineup Model Pin Pressure Direction Type Supply Voltage Accuracy -100 -50 (-15) 0 (-7) 25 50 (3) 025K G 050KG 100KG 5.0 Vdc Normal AP2 or or Gauge 200KG 500KG ±1.5 %FS 700KG 3.3 Vdc 001MG Opposite 050KV 100KV 100KW 3.0 Vdc ±2.0 %FS Same as the above © 2013 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product. 1 (7) Pressure Range 100 200 (15) (30) 500 700 1000 kPa (70) (100) (150) psi Document Number V-70045B Analog Output Semiconductor Pressure Sensor AP2 Series Device Name Code Sensor Code Pressure Code AP2 0 N - 025K G - STICK Model Pressure type G: Gauge/Positive V: Gauge/Negative W: Gauge/Bi-pressure Supply voltage 0: 5.0 Vdc 1: 3.3 Vdc 2: 3.0 Vdc Packing style Blank: Tray STICK: Stick Pressure value 025K: 25 kPa 050K: 50 kPa 100K: 100 kPa 200K: 200 kPa 500K: 500 kPa 700K: 700 kPa 001M: 1 MPa Pin direction N: Normal R: Opposite Block Diagram Output Characteristics 3.0, 3.3 or 5.0 Vdc 0.1 µF Pin 3 VDD Pressure Code: 050KV, 100KV Temp Sensor Vfs VDD ADC DSP Pre-Amp Sensor Bridge Pin 1 VSS EEPROM DAC Buffer OSC Output MUX Pin 2 VOUT SV Error POR Voff Pin 4 NC Pin 5 NC Max. Popt Min. Popt Pin 6 NC Input Pressure © 2013 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product. 2 Document Number V-70045B Analog Output Semiconductor Pressure Sensor AP2 Series Absolute Maximum Ratings Supply Voltage Item Symbol VDDmax Rating 6 Load Pressure Unit Vdc Pmax+ See Pressure Range Table Operating Temperature Topt -40 to +125 ℃ Storage Temperature Tstg -40 to +125 ℃ General Specifications Item Symbol Supply Voltage Sensor Code AP21* 3.3±0.165 AP20* 5.0±0.25 VDD Unit AP22* 3.0±0.15 Type of Pressure - Gauge pressure Pressure Media - Non-corrosive gases Vdc - 0 to +85 ℃ Operating Humidity Hopt 30 to 85 (non-condensing) %RH Storage Humidity Hstg 30 to 85 (non-condensing) %RH Compensated Temperature Pressure Range Item Symbol Absolute Maximum Load Pressure Pmax+ Measurement Pressure Popt Pressure Code 025KG 050KG 100KG 200KG 500KG 700KG 001MG 050KV 100KV 100KW +50 +100 +200 +400 +1000 +1400 +1500 +100 +200 +200 Min. 0 0 0 0 0 0 0 -50 -100 -100 Max. +25 +50 +100 +200 +500 +700 +1000 0 0 +100 Electrical Characteristics Sensor Code AP20* VDD = 5.0 Vdc AP21* VDD = 3.3 Vdc AP22* VDD = 3.0 Vdc Common Item Condition Offset Voltage Full Scale Voltage Span Voltage Min. Popt, 050KV & 100KV: Max. Popt Max. Popt, 050KV & 100KV: Min. Popt Min. to max. Popt Accuracy 0 to 85℃ Output Resolution Supply Current Offset Voltage Full Scale Voltage Span Voltage Min. Popt, 050KV & 100KV: Max. Popt Max. Popt, 050KV & 100KV: Min. Popt Min. to max. Popt Accuracy 0 to 85℃ Output Resolution Supply Current Offset Voltage Full Scale Voltage Span Voltage Min. Popt, 050KV & 100KV: Max. Popt Max. Popt, 050KV & 100KV: Min. Popt Min. to max. Popt Accuracy 0 to 85℃ Output Resolution Supply Current Response Time Sampling Frequency Load Resistor Load Capacitance for reference VOUT - VSS or VDD - VOUT VOUT - VSS © 2013 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product. 3 Unit kPa Load resistor RL =∞, Ambient temperature Ta = 25℃ Rating Symbol Unit Min. Typ. Max. Voff 0.1325 0.2 0.2675 V Vfs 4.6325 4.7 4.7675 V SV 4.5 V -1.5 +1.5 %FS Error -0.0675 +0.0675 V Vrso 2.5 mV Ic 3 mAdc Voff 0.2595 0.3 0.3405 V Vfs 2.9595 3.0 3.0405 V SV 2.7 V -1.5 +1.5 %FS Error -0.0405 +0.0405 V Vrso 1.7 mV Ic 2 mAdc Voff 0.096 0.15 0.204 V Vfs 2.796 2.85 2.904 V SV 2.7 V -2.0 +2.0 %FS Error -0.054 +0.054 V Vrso 1.5 mV Ic 2 mAdc tr 1 msec. fs 1 kHz RL 2.5 kΩ CL 15 nF Document Number V-70045B Analog Output Semiconductor Pressure Sensor AP2 Series Package Dimensions unit: mm Sensor Code: AP2*N Footprint (for reference) 6 - φ1.8 mm Hole for Pressure Port Diameter is depending on your design. 2.54 mm 6 - φ0.9 mm 2.54 mm Land pads 15.2 mm Sensor Code: AP2*R Footprint (for reference) 6 - φ1.8 mm 2.54 6 - φ0.9 mm 2.54 mm Land pads © 2013 Fujikura Ltd. All rights reserved. This data sheet has a possibility to be revised without notice. This data sheet does not contain all information. Before designing, please ask us the specifications of this product. 4 15.2 mm