8 7 6 5 4 3 ALUMINUM COMPATIBLE LASER WELDABLE FLEX TAIL MICRO-D CONNECTOR 2 REV - SRIMD514 DOCUMENT REVISIONS CHANGE NO. DATE INIT RLSE APPROVED 2014-09-09 • CONFIGURATION WITH THE FLANGE LOCATED AT THE TOP OF THE CONNECTOR • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL D • CONFORMS TO MIL-DTL-83513 AND ARE AVAILABLE IN 9, 15, 21, 25, 31, AND 37 COUNT PIN/SOCKET CONFIGURATIONS. D • INCORPORATES BERYLLIUM-COPPER PIN/SOCKETS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. • THE INTERNAL PINS CONFIGURED FOR FLEX ATTACHMENT. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-83513/2. 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: ALUMINUM ALLOY 4032 IN ACCORDANCE WITH ASTM B247 OR AMS 4319. THREADED INSERTS: IN ACCORDANCE WITH NAS1130-02-15. INTERFACIAL SEAL: FLUOROSILICONE RUBBER PER AMS-R-25988, CLASS 1, TYPE II, GRADE 50 OR 60. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. PLATE ENTIRE EXPOSED PIN, BOTH ENDS. PLATING IN SOCKETS NOT REQUIRED BENEATH BLEED HOLE. PRE-TIN SOLDER PIN ENDS USING SN63PB37 PER J-STD-006. C SHELL FINISH: SEE FINISH TABLE SHEET 2 FOR OPTIONS. 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT, CONFIGURATION, SHELL FINISH, AND LOCKING OR NONLOCKING THREADED INSERT (SEE SHEET 2): EXAMPLE: SRIMD514 - 25 - 1 A L ADD L FOR LOCKING THREADED INSERT SHELL FINISH (SEE TABLE SHEET 2) DETAILED CONFIGURATION NUMBER OF CONTACTS, X B BASE NUMBER B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR. MICRO-D, FLEX TAIL, TF AC LBW SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 3:1 2 CAGE CODE SRIMD514 3PJY7 SHEET 1 REV - 1 OF 2 A 8 6 7 4 5 3 2 SRIMD514 DOCUMENT W .002 A PIN 1 D .010 .000 X .002 PART NUMBER A SRIMD514 - X - 1 .042 D 2X R THREADED INSERT INTERFACIAL SEAL .300 MIN Y .001 NO PLATING THIS SURFACE C .025 ALL AROUND C Z .001 .010±.002 O .003 MAX BRK .003 MAX BRK WELD FLANGE .020±.002 O 2XR HOLE DETAIL (LAP WELD) .320 AS REQD TO SET CONNECTOR .055 Y .001 B O INSULATOR (INDIVIDUAL CONTACT SEAL) CONTACT .015 .002 .020 MIN O Z .001 .300 MIN B NO PLATING .020 .002 .003 MAX BRK O 2XR HOLE DETAIL (BUTT WELD) FINISH TABLE A LETTER SHELL FINISH UNLESS OTHERWISE SPECIFIED (NONE) CONVERSION COAT PER MIL-DTL-5541, TYPE 1, CL1A A CONVERSION COAT PER MIL-DTL-5541, TYPE 1, CL3 B NO FINISH C CONVERSION COAT PER MIL-DTL-5541, TYPE II, CL3 DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR. MICRO-D, FLEX TAIL, TF AC LBW SIZE DOCUMENT A SCALE FORM 300067 REV - 7 6 5 4 3 (321) 254-4067 WWW.SRIHERMETICS.COM 3:1 2 CAGE CODE SRIMD514 3PJY7 SHEET 1 REV - 2 OF 2 A