RM85 105 oC PCB power relays 31 oC 105 • Sensitive coil • Ambient temperature to 105 °C • For PCB and sockets • Accessories: sockets and modules Contacts Contact number & arrangement Contact material Max. switching voltage Min. switching voltage Rated load Min. switching current Max. inrush current Rated current Max. breaking capacity Min. breaking capacity Resistance Max. operating frequency • at rated load • no load AC/DC AC1 DC1 AC1 AC1 1NO AgSnO2, AgNi 400 V / 300 V 10 V AgSnO2, 5 V AgNi 10 A / 250 V AC 10 A / 24 V DC 10 mA AgSnO2, 5 mA AgNi 20 A 10 A 2 500 VA 1 W AgSnO2, 0,3 W AgNi ≤ 100 mΩ 600 cycles/hour 72 000 cycles/hour Coil Rated voltage Must release voltage Operating range of supply voltage Rated power consumption DC DC 5...48 V DC: ≥ 0,1 Un see Table 1 and Fig. 3 0,25 W Insulation Insulation category Insulation rated voltage Dielectric strength • coil - contact • contact - contact Contact - coil distance • clearance • creepage C250 / B400 400 V AC 5 000 V AC 1 000 V AC ≥ 10 mm ≥ 10 mm General data Operating time (typical value) Release time (typical value) Electrical life • resistive AC1 at temperature +105 oC • cosφ • L/R=40 ms Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature • storing • operating Cover protection category Shock resistance Vibration resistance Solder bath temperature Soldering time Standard contact material marked with bolt type. www.relpol.com.pl 8 ms 3 ms > 1,7 x 105 10 A, 230 V AC > 2,8 x 105 8 A, 230 V AC > 3,2 x 105 6 A, 230 V AC see Fig. 1 > 105 0,12 A, 220 V DC > 3 x 107 29 x 12,7 x 15,7 mm 14 g -40...+105 oC -40...+105 oC IP 40 30 g 10 g 10...150 Hz max. 270 oC max. 5 s RM85 105 oC PCB power relays 32 www.relpol.com.pl RM85 105 oC PCB power relays 33 www.relpol.com.pl RM85 105 oC PCB power relays 34 Mounting Relays RM85 105 oC are designed for: • direct PCB mounting • screw terminals sockets GZT80 and GZM80 with clip GZT80-0040, 35 mm DIN rail mount, EN 50022 or on panel mounting. M... type signalling and protection plug-in modules are available with sockets (see page 170) • terminals sockets for PCB mounting PW80 and GW80 with clip MH16-2. see Table 1 page 32 www.relpol.com.pl