RM83 PCB power relays 74 • Miniature size • General purpose relays • High inrush current - lamp load 120 A / 20 ms (AgSnO2 contacts) • 110 V sensitive coil available • Protection category IP 40 • For PCB and sockets • Accessories: sockets and modules Contacts Contact number & arrangement Contact material Max. switching voltage Min. switching voltage Rated load AC/DC AC1 DC1 Min. switching current Max. inrush current Rated current Max. breaking capacity Min. breaking capacity Resistance Max. operating frequency • at rated load • no load AC1 AC1 1C/O, 1NO, 1NC AgCdO, AgCdO/Au 0,2 µm, AgSnO2 400 V / 300 V 10 V AgCdO, 10 V AgCdO/Au 0,2 µm, 10 V AgSnO2 16 A / 250 V AC 16 A / 24 V DC 5 mA AgCdO, 5 mA AgCdO/Au 0,2 µm, 10 mA AgSnO2 30 A 1NO, AgSnO2 16 A 4 000 VA 0,5 W AgCdO, 0,5 W AgCdO/Au 0,2 µm, 1 W AgSnO2 ≤ 100 mΩ 600 cycles/hour 72 000 cycles/hour Coil Rated voltage Must release voltage Operating range of supply voltage Rated power consumption DC DC 5...110 V standard version 110 V sensitive version DC: ≥ 0,1 Un see Table 1 0,6 W 5...60 V standard version 0,6 W 110 V sensitive version 0,9 W 110 V standard version Insulation Insulation category Insulation rated voltage Dielectric strength • coil - contact • contact - contact Contact - coil distance • clearance • creepage C250 400 V AC 4 000 V AC 1 000 V AC ≥ 8 mm ≥ 8 mm General data Operating time (typical value) Release time (typical value) Electrical life • resistive AC1 • lamp load • halogen lamp load • cosφ • L/R=40 ms Mechanical life (cycles) Dimensions (L x W x H) Weight Ambient temperature 7 ms 3 ms • storing • operating Cover protection category Shock resistance Vibration resistance Solder bath temperature Soldering time > 105 16 A, 250 V AC > 105 1000 W, 230 V AC 1NO, AgSnO2 > 3 x 104 3000 W, 230 V AC 1NO, AgSnO2 > 104 2500 W, 230 V AC 1NO, AgSnO2 see Fig. 2 > 105 0,12 A, 220 V DC > 3 x 107 29,5 x 13,1 x 25,5 mm 18 g -40...+85 oC -40...+70 oC IP 40 20 g 10 g 10...150 Hz max. 270 oC max. 5 s Standard contact material marked with bolt type. www.relpol.com.pl RM83 PCB power relays 75 www.relpol.com.pl RM83 PCB power relays 76 Mounting Relays RM83 are designed for: • direct PCB mounting • screw terminals sockets GZT80 and GZM80, if holding clips are not necessary and screw terminals sockets GZ80 with clip MS25, 35 mm DIN rail mount, EN 50022 or on panel mounting. M... type signalling and protection plug-in modules are available with sockets (see page 170) • terminals sockets for PCB mounting PW80 and GW80 with clip RM81 0001. see Table 1 page 75 www.relpol.com.pl