8 7 6 5 4 3 REV ALUMINUM COMPATIBLE LASER WELDABLE POWER SUB-D CONNECTOR • CONFIGURATION WITH THE FLANGE LOCATED AT THE TOP OF THE CONNECTOR • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL D 2 SRISD105 DOCUMENT REVISIONS CHANGE NO. DATE APPROVED - INIT RLSE 05-09-06 J. PETRI A DCN000141 6/6/2006 J. PETRI B DCN000457 3/18/2009 J. PETRI C DCN000809 3/29/2011 J. PETRI Jim Petri Melbourne, FL 2011.04.08 07:59:17 -04'00' • CONFORMS TO MIL-DTL-24308 (SIZE 20 CONTACT) AND IS AVAILABLE IN 3, 5, AND 8 PIN COUNT CONFIGURATIONS D • INCORPORATES BERYLLIUM-COPPER CONTACTS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL • THE INTERNAL PINS CONFIGURED TO ACCEPT SOLDERCUPS (P/N 120029-1) FOR WIRE ATTACH 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-24308/2. C 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: ALUMINUM ALLOY 4032 IN ACCORDANCE WITH ASTM B247. THREADED INSERTS: IN ACCORDANCE WITH NAS 1130-04-15. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. PLATE ENTIRE EXPOSED PIN, BOTH ENDS. SHELL: CHEMICAL CONVERSION COAT IN ACCORDANCE WITH MIL-C-5541, CLASS 1A OR NONE. 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2): EXAMPLE: SRISD105 - 8 - 1 CONFIGURATION (SEE TAB) PIN COUNT, X BASE NUMBER B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE 7 6 5 4 3 CONNECTOR, POWER, SUB-D, TOP FLANGED, ALUMINUM, LASER WELDABLE SIZE DOCUMENT SRISD105 A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 1:1 2 CAGE CODE 3PJY7 SHEET 1 REV C 1 OF 2 A 8 6 7 4 5 3 2 SRISD105 DOCUMENT W .002 C .480 TYP D D .546±.002 SOLDERCUP (P/N 120029-1) SHOWN A .010 TYP INTERFACE PER MIL-DTL-24308 .020 (.142) TYP O .010±.002 .015±.002 C C .491 SHELL .160 INSULATOR CONTACT X 2XR B B .510 .003 MAX BRK .002 HOLE DETAIL A C NUMBER OF CONTACTS W X PART NUMBER PIN EXTENSION A 3 1.665 1.629 SRISD105 - X - 1 .170 5 2.205 2.169 8 2.854 2.818 UNLESS OTHERWISE SPECIFIED DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE CONNECTOR, POWER, SUB-D, TOP FLANGED, ALUMINUM, LASER WELDABLE SIZE DOCUMENT 7 6 5 4 3 SRISD105 A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 1:1 2 CAGE CODE 3PJY7 SHEET 1 REV C 2 OF 2 A