8 7 6 4 5 3 REV A B ALUMINUM COMPATIBLE LASER WELDABLE SUB-D CONNECTOR • TRADITIONAL CONFIGURATION WITH THE FLANGE LOCATED AT THE MIDSECTION OF THE CONNECTOR D 2 C SRISD101 DOCUMENT REVISIONS CHANGE NO. DATE INIT RLSE ----DCN000008 8/9/2004 DCN000083 7/7/2005 DCN000395 APPROVED /s/ dc /s/ dc JP 12/18/2008 J. PETRI • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL • CONFORMS TO MIL-DTL-24308 (SIZE 20 CONTACT) AND ARE AVAILABLE IN 9, 15, 25, 37, AND 50 COUNT CONTACT CONFIGURATIONS. D • INCORPORATES BERYLLIUM-COPPER CONTACTS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. • THE INTERNAL PINS CAN BE CONFIGURED TO ACCEPT INSULATED WIRE, AUTOMATIC WIRE BONDS, RIBBON WELDS, OR SOLDER CONNECTIONS. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-DTL-24308/2. 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: ALUMINUM ALLOY 4032 IN ACCORDANCE WITH ASTM B247. THREADED INSERTS: IN ACCORDANCE WITH NAS 1130-04-15. 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. PLATE ENTIRE EXPOSED PIN, BOTH ENDS. C SHELL: CHEMICAL CONVERSION COAT IN ACCORDANCE WITH MIL-C-5541, CLASS 1A. C 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2): EXAMPLE: SRISD101 - 25 - A 1 C DETAILED CONFIGURATION PIN END STYLE (SEE VIEW A) NUMBER OF CONTACTS, X BASE NUMBER B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE 7 6 5 4 3 CONNECTOR, SUB-D, MID FLANGED, ALUMINUM COMPATIBLE LASER WELDABLE SIZE DOCUMENT SRISD101 A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 2:1 2 CAGE CODE 3PJY7 SHEET 1 REV C 1 OF 3 A 8 6 7 5 4 3 W .002 2 SRISD101 DOCUMENT PIN EXTENSION .010 D X .002 D ROW A ROW A ROW B ROW B ROW C THREADED INSERT 2XR INSULATOR 50 PIN CONFIGURATION 9-37 PIN CONFIGURATIONS PIN EXTENSIONS (SEE SH 3) C C SHELL .050±.002 .381 Y .001 .045±.001 .050 Z .001 CONTACT B PIN END STYLE: A-STRAIGHT B-RADIUS C-WIREBOND FLAT D-SOLDERCUP E-STEPPED VIEW A A .003 MAX BRK ALL AROUND 2XR .015 B HOLE DETAIL UNLESS OTHERWISE SPECIFIED C DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE 7 6 5 4 3 CONNECTOR, SUB-D, MID FLANGED, ALUMINUM COMPATIBLE LASER WELDABLE SIZE DOCUMENT SRISD101 A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 2:1 2 CAGE CODE 3PJY7 SHEET 1 REV C 2 OF 3 A 8 7 6 STRAIGHT PIN END STYLE, A RADIUS PIN END STYLE, B PIN EXTENSION A, B, C PIN EXTENSION A, B, C 4 5 WIREBOND FLAT PIN END STYLE, C 3 2 SOLDERCUP PIN END STYLE, D PIN EXTENSION A, B, C SRISD101 DOCUMENT STEPPED PIN END STYLE, E PIN EXTENSION A, B, C PIN EXTENSION A, B, C D D .040 .040 MIN FLAT .026 .063 .040 .015 MIN THICK .045 .040 MIN WIDE .135 C PART NUMBER SRISD101 - X - D 1 A .190 B .190 C .190 PART NUMBER SRISD101 - X - E 1 A .105 B .105 C .105 C B B UNLESS OTHERWISE SPECIFIED A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 125 RMS SURFACE FINISH THIRD ANGLE PROJECTION SRI HERMETICS TITLE 7 6 5 4 3 CONNECTOR, SUB-D, MID FLANGED, ALUMINUM COMPATIBLE LASER WELDABLE SIZE DOCUMENT SRISD101 A SCALE FORM 300067 REV - (321) 254-4067 WWW.SRIHERMETICS.COM 2:1 2 CAGE CODE 3PJY7 SHEET 1 REV C 3 OF 3 A