8 7 6 5 4 3 SRIMD501 DOCUMENT REVISIONS ALUMINUM COMPATIBLE LASER WELDABLE MICRO-D CONNECTOR • CONFIGURATION WITH THE FLANGE LOCATED AT THE TOP OF THE CONNECTOR • DESIGNED TO LASER WELD INTO AN ELECTRONIC CHASSIS WALL D 2 • CONFORMS TO MIL-PRF-83513 AND ARE AVAILABLE IN 9, 15, 21, 25, 31, 37, 51, 69 AND 100 COUNT PIN/SOCKET CONFIGURATIONS. • INCORPORATES BERYLLIUM-COPPER PIN/SOCKETS INDIVIDUALLY SEALED USING CERAMAX® PROPRIETARY CERAMIC TO ESTABLISH A DURABLE HERMETIC SEAL. REV CHANGE NO. DATE APPROVED - INIT RLSE 11-04-2004 DC A DCN000093 9/22/2005 JP B DCN000379 5/13/2009 J. PETRI C DCN000837 5/26/2011 J. PETRI D DCN001029 5/30/2012 J. PETRI E DCN001305 D Jim Petri 2015.08.26 15:10:38 -04'00' 2/19/2014 • THE INTERNAL PINS CAN BE CONFIGURED TO ACCEPT INSULATED WIRE, AUTOMATIC WIRE BONDS, RIBBON WELDS, OR SOLDER CONNECTIONS. 1. LEAK RATE: LESS THAN OR EQUAL TO 1X10E-9 CC/SEC He AT ONE ATMOSPHERE DIFFERENTIAL PRESSURE. 2. INTERFACE AND MOUNTING HOLES IN ACCORDANCE WITH MIL-PRF-83513/2. 3. MATERIALS: CONTACT: BERYLLIUM-COPPER ALLOY 172/173 IN ACCORDANCE WITH ASTM B196/197. INSULATOR: CERAMAX PROPRIETARY CERAMIC. WELD FLANGE: ALUMINUM ALLOY 4032 IN ACCORDANCE WITH ASTM B247. THREADED INSERTS: IN ACCORDANCE WITH NAS 113O. NAS 1130-02-15 (9-51), NAS 1130-04-15 (100-PIN) INTERFACIAL SEAL: FLUOROSILICONE RUBBER PER MIL-R-25988, CLASS 1, TYPE II, GRADE 60. C 4. FINISH: CONTACTS: NICKEL PLATE PER QQ-N-290, .000100/.000250 THICK. GOLD PLATE PER ASTM B488, TYPE III, CODE A, .000050/.000100 THICK. PLATE ENTIRE EXPOSED PIN, BOTH ENDS. PLATING IN SOCKETS NOT REQUIRED BENEATH BLEED HOLE. C SHELL FINISH: SEE FINISH TABLE SHEET 2 FOR OPTIONS. 5. ORDERING INSTRUCTIONS: SPECIFY BASE NUMBER FOLLOWED BY DASH NUMBERS INDICATING PIN COUNT AND CONFIGURATION (SEE SHEET 2): EXAMPLE: SRIMD501 - 25 - A 1 A L ADD L FOR LOCKING THREADED INSERT E SHELL FINISH (SEE TABLE SHEET 2) DETAILED CONFIGURATION PIN END STYLE (SEE VIEW A) NUMBER OF CONTACTS, X BASE NUMBER B B A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION a division of WINCHESTER TITLE CONNECTOR, MICRO-D, TF AC LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 (321) 254-4067 www.srihermetics.com SCALE 3:1 2 CAGE CODE SRIMD501 3PJY7 SHEET 1 REV E 1 OF 3 8 6 7 5 3 4 W .002 2 A .010 A .010 A .010 B .010 B .010 B .010 PIN 1 SRIMD501 DOCUMENT D D X .002 2X R THREADED INSERT C .010 D .010 C .010 INTERFACIAL SEAL 9-37 PIN CONFIGURATIONS 51 PIN CONFIGURATION 100 PIN CONFIGURATION PIN EXTENSIONS (SEE SH 3) .300 MIN E Y .001 NO PLATING THIS SURFACE C C .025 ALL AROUND .010±.002 O .003 MAX BRK Z .001 .003 MAX BRK 2XR WELD FLANGE .020±.002 O HOLE DETAIL (LAP WELD) .320 E .300 MIN AS REQD TO SET CONNECTOR .055 Y .001 O INSULATOR (INDIVIDUAL CONTACT SEAL) B B CONTACT VIEW A .015 .002 .020 MIN PIN END STYLE: A-STRAIGHT CUT B-STEPPED C-WIREBOND FLATS (SOLDERCUP SRIC101-1 AVAILABLE FOR WIRE ATTACH TO STRAIGHT CUT END CONFIGURATION) O NO PLATING .020 .002 Z±.001 .003 MAX BRK O 2XR HOLE DETAIL (BUTT WELD) E E FINISH TABLE A LETTER SHELL FINISH (NONE) CONVERSION COAT PER MIL-DTL-5541, TYPE 1, CL1A A CONVERSION COAT PER MIL-DTL-5541, TYPE 1, CL3 B NO FINISH C CONVERSION COAT PER MIL-DTL-5541, TYPE II, CL3 A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION a division of WINCHESTER TITLE CONNECTOR, MICRO-D, TF AC LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 (321) 254-4067 www.srihermetics.com SCALE 3:1 2 CAGE CODE SRIMD501 3PJY7 SHEET 1 REV E 2 OF 3 8 6 7 5 3 4 STEPPED PIN END STYLE, B STRAIGHT PIN END STYLE, A 2 WIREBOND FLAT PIN END STYLE, C PIN EXTENSION A, B, C, D PIN EXTENSION A, B, C, D SRIMD501 DOCUMENT PIN EXTENSION A, B, C, D D +.010 .025 FLAT - .000 .012 .001 E .018 .001 D .007 MIN THICK SR .018 MIN WIDE C C PART NUMBER SRIMD501 - X - A 1 SRIMD501 - X - A 2 SRIMD501 - X - A 3 A .110 .118 .045 B .110 .118 .075 C .110 .118 - PART NUMBER SRIMD501 - X - B 1 SRIMD501 - X - B 2 SRIMD501 - X - B 3 D .110 .118 - A .120 .083 .083 B .120 .083 .083 C .120 .083 .083 D .120 .083 .083 E .037 .037 .060 PART NUMBER SRIMD501 - X - C 1 SRIMD501 - X - C 2 SRIMD501 - X - C 3 SRIMD501 - X - C4 SRIMD501 - X - C5 SRIMD501 - X - C6 A .145 .110 .118 .070 .110 .110 B .110 .050 .083 .030 .145 .083 C .075 - D .040 - B B A A DIMENSIONING IAW ASME Y14.5M-1994 DIMENSIONS APPLY AFTER PROCESSES DIMENSIONS IAW US CUSTOMARY UNITS .X .1, .XX .01, .XXX .005, .5 .010 MAX OUTSIDE R, .005 MAX INSIDE R 63 RMS SURFACE FINISH THIRD ANGLE PROJECTION a division of WINCHESTER TITLE CONNECTOR, MICRO-D, TF AC LBW SIZE DOCUMENT A DO NOT SCALE DRAWING FORM 300067 REV A 7 6 5 4 3 (321) 254-4067 www.srihermetics.com SCALE 3:1 2 CAGE CODE SRIMD501 3PJY7 SHEET 1 REV E 3 OF 3