ACGRA4007-HF

SMD General Purpose Rectifiers
ACGRA4001-HF Thru. ACGRA4007-HF
Reverse Voltage: 50 to 1000 Volts
Forward Current: 1.0 Amp
RoHS Device
Halogen Free
DO-214AC (SMA)
Features
- Ideal for surface mount applications.
- Low profile package.
- Built in strain relief.
- Easy pick and place.
- Plastic package has Underwriters Laboratory
flammability classification 94V-0.
- Low forward drop.
- Glass passivated dip junction.
- High temperature soldering:
260°C/10 seconds at terminals
- Comply with AEC-Q101 .
0.181(4.60)
0.157(4.00)
0.114(2.90)
0.098(2.50)
0.062(1.60)
0.047(1.25)
0.208(5.28)
0.188(4.80)
0.012(0.305)
0.006(0.152)
0.096(2.44)
0.078(2.00)
0.008(0.203)
0.002(0.051)
0.060(1.52)
0.030(0.76)
Mechanical data
Dimensions in inches and (millimeter)
- Case: JEDEC DO-214AC, molded plastic.
- Terminals: Solder plated, Solderable per
MIL-STD-750, Method 2026.
- Polarity: Indicated by cathode band.
- Weight: 0.064 grams( Approx.).
Circuit diagram
Maximum Ratings and Electrical Characteristics
Ratings at 25°C ambient temperature unless otherwise specified. Single phase half wave,
60 Hz, resistive or inductive load. For capacitive load, derate current by 20%.
Symbol ACGRA ACGRA ACGRA ACGRA ACGRA ACGRA ACGRA Units
4001-HF 4002-HF 4003-HF 4004-HF 4005-HF 4006-HF 4007-HF
Parameter
Max. Recurrent peak reverse voltage
VRRM
50
100
200
400
600
800
1000
V
Max. DC blocking voltage
VDC
50
100
200
400
600
800
1000
V
Max. RMS voltage
VRMS
35
70
140
280
420
560
700
V
Peak forward surge current 8.3ms
single half sine-wave superimposed
on rate load (JEDEC method)
IFSM
30
A
Max. average forward rectified current,
at TL=75°C
I(AV)
1.0
A
Max. instantaneous forward voltage at 1.0A
V
VF
1.1
TA=25°C
IR
5.0
TA=125°C
IR
100
Max. Reverse recovery time (Note1)TJ=25°C
Trr
2.5
µs
Typical junction capacitance (Note 2)
CJ
2.5
pF
RθJA
15.0
°C/W
TJ
-55 to +150
°C
TSTG
-55 to +150
°C
Max. DC reverse current at
rated DC blocking voltage
Max. Thermal resistance (Note 3)
Operating temperature range
Storage temperature range
μA
Notes: 1. Reverse recovery test condition: IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1MHz and applied VR=4.0 volts.
3. 8.0mm² (0.013mm thick) land areas.
Company reserves the right to improve product design , functions and reliability without notice.
REV:A
AQW-JG006
Page 1
Comchip Technology CO., LTD.
SMD General Purpose Rectifiers
Rating and Characteristic Curves (ACGRA4001-HF thru. ACGRA4007-HF)
Fig.1 - Forward Current Derating Curve
Instantaneous Forward Current, ( A )
1.4
1.2
1.0
0.8
0.6
0.4
0.2
0
Instantaneous Reverse Current, (µA)
Single Phase Half Wave 60Hz
Resistive or inductive Load
P.C.B Mounted on 0.315x0.315”(8.0x8.0mm)
Thick Copper Pad Areas
0
20
40
60
80
100
120
140
160
1.0
TJ=25°C
Pulse width = 300µs
2% Duty Cycle
0.1
0.6
0.8
1.0
1.2
1.4
1.6
Instantaneous Forward Voltage, (V)
Fig.3 - Typical Reverse Characteristics
Fig.4 - Maximum Non-Repetitive peak
Forward Surge Current
30
10
TJ=100°C
1.0
TJ=75°C
0.1
TJ=25°C
0.01
0
20
40
60
80
100
120
8.3ms Single Half Sine-Wave
(JEDEC Method)
20
15
10
5
1
10
100
Percent Of Peak Reverse Voltage, (%)
Number Of Cycles At 60Hz
Fig.5 - Transient Thermal Impedance
Fig.6 - Typical Junction Capacitance
100
Junction Capacitance, (pF)
10
1
0.01
1.8
25
0
140
100
Thermal Impedance, (°C/W)
10
Lead Temperature, (°C)
100
0.001
100
0.4
Peak Forward Surge Current, (A)
Average Forward Current, (A)
1.6
Fig.2 - Typical Instantaneous Forward
Characteristics
Units Mounted on
20in² (5.4mm)+0.5mil
inches(0.013mm)
Thick Copper Land Areas
0.1
1.0
10
100
TJ=25°C
f=1MHz
Vsig=50mVp-p
10
1
0.1
Heating Time, (SEC.)
1.0
10
100
1000
Reverse Voltage, (V)
Company reserves the right to improve product design , functions and reliability without notice.
REV:A
AQW-JG006
Page 2
Comchip Technology CO., LTD.
SMD General Purpose Rectifiers
Reel Taping Specification
d
P0
P1
T
E
Index hole
F
W
B
P
C
A
12
o
0
D2
D1 D
W1
Trailer
Device
.......
.......
End
.......
.......
Leader
.......
.......
.......
.......
10 pitches (min)
Start
10 pitches (min)
Direction of Feed
DO-214AC
(SMA)
DO-214AC
(SMA)
SYMBOL
A
B
C
d
D
D1
D2
(mm)
3.4 Max.
5.78 Max.
2.94 Max.
1.55 + 0.10
330 Max.
50.00 Min.
20.2 Max.
(inch)
0.134 Max.
0.227 Max.
0.115 Max.
0.061 + 0.004
12.99 Max.
1.969 Min
0.795 Max.
SYMBOL
E
F
P
P0
P1
W
W1
(mm)
1.75 ± 0.10
5.50 ± 0.05
4.00 ± 0.10
4.00 ± 0.10
2.00 ± 0.05
12.00 ± 0.30
18.40 Max.
(inch)
0.069 ± 0.004
0.217 ± 0.002
0.157 ± 0.004
0.157 ± 0.004
0.079 ± 0.002
0.472 ± 0.012
0.724 Max.
Company reserves the right to improve product design , functions and reliability without notice.
REV:A
AQW-JG006
Page 3
Comchip Technology CO., LTD.
SMD General Purpose Rectifiers
Marking Code
Part Number
Marking Code
ACGRA4001-HF
4001
ACGRA4002-HF
4002
ACGRA4003-HF
4003
ACGRA4004-HF
4004
ACGRA4005-HF
4005
ACGRA4006-HF
4006
ACGRA4007-HF
4007
C:Comchip Logo
A:Package
C
A
XXXX
XXXX : Product Type Marking Code
Cathode Mark
Suggested PAD Layout
DO-214AC (SMA)
SIZE
(mm)
(inch)
D
A
1.66 Max.
0.065 Max.
A
B
2.08 Min.
0.082 Min.
C
2.08 Min
0.082 Min.
D
5.80 REF.
0.228 REF.
C
B
Standard Packaging
Case Type
DO-214AC (SMA)
Qty Per Reel
Reel Size
(Pcs)
(inch)
5,000
13
Company reserves the right to improve product design , functions and reliability without notice.
REV:A
AQW-JG006
Page 4
Comchip Technology CO., LTD.