M1G THRU M7G SURFACE MOUNT GENERAL RECTIFIER Reverse Voltage – 50 to 1000 V Forward Current – 1 A Features • For surface mounted applications • Low profile package • Built-in strain relief • Easy pick and place • Plastic package has Underwriters Laboratory Flammability Classification 94V-0 • Glass passivated chip junction Mechanical Data • Case: SMA (DO-214AC), molded plastic. • Terminals: Solder plated, solderable per MIL-STD-750 Method 2026 • Polarity: Indicated by cathode band. Absolute Maximum Ratings and Characteristics Ratings at 25OC ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. Symbols M1G M2G M3G M4G M5G M6G M7G Units Paramter Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Rectified Current at TL = 100 OC I(AV) 1 A Peak Forward Surge Current 8.3ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method) IFSM 30 A Maximum Instantaneous Forward Voltage at 1 A VF 1.1 V Maximum DC Reverse Current at Rated DC Blocking Voltage IR 5 50 µA CJ 12 RθJL 30 TJ ,TS - 55 to + 150 at TA = 25 OC at TA = 125 OC Typical Junction Capacitance 1) Typical Thermal Resistance 2) Operating and Storage Temperature Range 1) 2) pF C/W O C O Measured at 1 MHz and applied VR = 4 V. 8 mm2 (0.013 mm thick) land areas. SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 14/04/2008 M1G THRU M7G 1.0 25 50 75 100 125 150 175 LEAD TEMPERATURE .o C 25 15 10 5 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES Fig. 1-FORWARD CURRENT DERATING CURVE 10 Tj =125o C Tj =75o C 0.1 Tj =25o C 0.01 0.001 0 20 40 60 1 5 2 10 20 50 100 NUMBER OF CYCLES AT 60 Hz Fig. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 100 1 8.3ms Single Half Sine Wave (JEDEC Method) 20 80 100 120 140 PERCENT OF PEAK REVERSE VOLTAGE, % INSTANTANEOUS FORWARD CURRENT, MICROAMPERES 2.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD CURRENT, AMPERES 30 SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.315x0.315"(8.0x8.0mm) COPPER PAD AREAS 100 50 20 10 5 2 1 0.5 0.2 0.1 0.05 0.02 0.01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 INSTANTANEOUS FORWARD VOLTAGE , VOLTS Fig. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS Fig. 3-TYPICAL REVERSE CHARACTERISTICS Units Mounted On 20in2 (5.4mm 2 )+0.5mil inches(0.013mm) Thick Copper Land Areas 500 200 100 50 100 CAPACITANCE. pF THERMAL IMPEDANCE (oC/W) 1000 20 10 5 2 1 0.01 0.1 1 10 Tj =25 oC f=1.0MHz Vsig=50mVp-p 50 20 10 5 2 1 0 1.0 10 100 1000 100 REVERSE VOLTAGE VOLTS Fig. 5-TRANSIENT THERMAL IMPEDANCE REVERSE VOLTAGE VOLTS Fig. 6-TYPICAL JUNCTION CAPACITANCE SEMTECH ELECTRONICS LTD. (Subsidiary of Sino-Tech International Holdings Limited, a company listed on the Hong Kong Stock Exchange, Stock Code: 724) ® Dated : 14/04/2008