35173A Mounting Adapter for Horizontal Mounting of Measurement Specialties Non-cubical Analog Accelerometers Technical Simplify Accelerometer Mounting Data * Features and Benefits Precision Machined Faces of mounting plate are machined parallel to minimize errors. Low Mass Aluminum The 35173A is fabricated from 6061-T6 aluminum to reduce mass while providing optimal rigidity. Convenience The 35173A mounting adapter simplifies accelerometer mounting when the system to be measured can be accessed from only one side, and a horizontal mounting is desired. When access from both sides is possible, the 35173A can be used as an alternate to the accelerometer’s integral mount. 0.450 11.42 0.127 3.23 Measurement Specialties’ 35173A mounting adapter makes it easy to mount most Measurement Specialties uniaxial, biaxial, or XL403 accelerometers when it is not convenient to use the accelerometer’s integral mount. Two 3.0 x 6 mm socket flat head screws are included to attach the sensor to the adapter. The adapter with accelerometer can then be mounted to the object under test using M3, M3.5, or #6 screws. To prevent screws from loosening due to vibrations, a locking compound is recommended for all threads. 0.354 8.99 0.450 REF 11.42 0.188 4.76 0.354 8.99 1.437 36.50 0.134 THRU 0.289 7.33 X 90° (4) Places 0.354 8.99 1.062 26.97 0.147 3.73 THRU (4) Places 0.354 8.99 REF 0.118 3.00 1.253 31.83 Dimensions in inches [mm] Tolerances ±0.005 [0.127] 1.507 38.28 35173A Mounting Adapter precisionsensors.meas-spec.com 2236 N. Cleveland-Massillon Road Akron OH 44333 PH : 330-659-3312 Third angle 8/12/2013 www.meas-spec.com