Process displays Analog measured value input, 2 limits Large 14 mm display LED, 6-digits, programmable PCD41 Features –– Process display –– Display 6-digits –– Connection: One-channel analog sensor –– Two limits as relay output –– With peak value memory –– Interface RS232 or RS422/RS485 Description Voltage supply 24/48 VAC ±10 % (50/60 Hz) 115/230 VAC ±10 % (50/60 Hz) 12...30 VDC Power consumption 6 VA, 4 W Sensor supply 12...26 VDC / max. 80 mA PCD41 is a display for measured values which signals are available as voltage or DC current. The operator is aligning the display by means of the front keypad. Two optional limits "P1" and "P2" that can be assigned at will allow production process control. Furthermore there is an electronic peak value memory (slave pointer). Display LED, 7-segment display Number of digits 6-digits Technical data - mechanical design Digit height 14 mm Ambient temperature 0...+50 °C Function Digital display of 1 analog measured value Storage temperature -20...+70 °C Relative humidity 80 % non-condensing Core cross-section 1.5 mm² Protection DIN EN 60529 IP 65 (face with seal) Analog input Limits Control inputs Calculating functions Offset (maximum and minimum analogue limit) Operation / keypad Membrane with softkeys Housing type Built-in housing Dimensions W x H x L 96 x 48 x 124 mm Cutout dimensions 92 x 44 mm (-0.6) Mounting depth 124 mm Limits Without, 2 Mounting Clip frame for built-in housing Input logic PNP Weight approx. 350 g (AC), 250 g (DC) Control inputs 2 Inputs Material Housing: Makrolon 6485 (PC) Control functions Hold, Reset, Keylock, etc. Data memory >10 years in EEPROM Outputs relay Normally open or closed, programmable Interfaces RS232, RS422, RS485 Standard DIN EN 61010‑1 Protection class II Overvoltage category II Pollution degree 2 Emitted interference DIN EN 61000-6-3 Interference immunity DIN EN 61000-6-2 Analog input Programmable parameters 0(2)...10 V, 0(4)...20 mA Resolution 12 bit Temp. coeffic. typ. ±20 ppm/°C 1 www.baumer.com/motion 12/1/2015 Technical data - electrical ratings Subject to modification in technic and design. Errors and omissions excepted. PCD41 - Process display Process displays Analog measured value input, 2 limits Large 14 mm display LED, 6-digits, programmable PCD41 Part number Block circuit diagram PCD41. PX01 9ROWDJH VXSSO\ $QDORJLQSXW Voltage supply 1 24 / 48 VAC 2 115 / 230 VAC 3 12...30 VDC 0 1 2 3 3HDNYDOXHPHPRU\ &RQWUROLQSXW Inputs / outputs 0...10 V / no limits 0...20 mA / no limits 0...10 V / with limits 0...20 mA / with limits 75 Interface 0 Without interface 1 RS422 / RS485 2 RS232 0HDVXULQJYDOXH 0HDVXULQJ YDOXH 56 75 6HQVRU VXSSO\ /LPLW /LPLW 56 7 7 5 5 2XWSXW 3 3 ,QWHUIDFH 5656 7[' ,QWHUIDFH 56 5[' *1' Connection diagram 9 9 6HQVRU VXSSO\ $QDORJ LQSXW 3 3 /LPLWYDOXH PD[9 WHUPLQDOWHUPLQDO WHUPLQDO 75 75 56 &RQWURO LQSXW 7[' 5[' *1' 56 56 Comparator inputs Input circuit Control inputs PNP-logic Input level Programmable Input level Low 0...2 VDC Input level High 3...40 VDC Input resistance 3 kΩ Relay outputs Output circuit Switching voltage max. 250 VAC / 110 VDC Switching current max. 1A Switching capacity max. 150 VA / 30 W Relay responding time 5 ms Dimensions 2 www.baumer.com/motion 12/1/2015 9ROWDJHVXSSO\ 7 7 5 5 Subject to modification in technic and design. Errors and omissions excepted. Trigger level