74LVC2G06

74LVC2G06
DUAL INVERTERS with OPEN DRAIN OUTPUTS
Description
Pin Assignments
The 74LVC2G06 is a dual inverter gate with open drain outputs. The
device is designed for operation with a power supply range of 1.65V
to 5.5V. The input is tolerant to 5.5V allowing this device to be used
in a mixed voltage environment. The device is fully specified for
partial power down applications using IOFF. The IOFF circuitry disables
the output preventing damaging current backflow when the device is
powered down. The open-drain output can be connected to other
open drain outputs to implement active-low wired-OR or active-high
wired-AND functions. The maximum sink current is 32mA.
( Top View )
( Top View )
6 1Y
1A 1
5 Vcc
GND 2
4 2Y
2A 3
1A
1
6 1Y
GND
2
5 Vcc
2A
3
4 2Y
X2-DFN1410-6
SOT26 / 363
( Top View)
Features








( Bottom View )
Wide Supply Voltage Range from 1.65V to 5.5V
-24mA Output Drive at 3.0V
CMOS Low Power Consumption
IOFF Supports Partial-Power-Down Mode Operation
Inputs Accept up to 5.5V
ESD Protection Tested per JESD 22

Exceeds 200-V Machine Model (A115)

Exceeds 2000-V Human Body Model (A114)

Exceeds 1000-V Charged Device Model (C101)
Latch-Up Exceeds 100mA per JESD 78, Class I
DFN1409 package designed as a direct replacement for chip
scale packaging.

Range of Package Options SOT26, SOT363, X1-DFN1010-6,



X2-DFN1010-6, X2-DFN1409-6, and X2-DFN1410-6
Leadless Packages Named per JESD30E
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
2A 3
4 2Y
1A
1
6
GND
2A
2
5
Vcc
3
4
2Y
1Y
X1-DFN1010-6
GND 2
1A 1
5 Vcc
6 1Y
DFN1409
Chip Scale
Alternative
( Top View )
1A
1
GND 2
2A 3
6 1Y
5 Vcc
4 2Y
X2-DFN1010-6
Applications




Voltage Level Shifting
General Purpose Logic
Power Down Signal Isolation
Wide array of products such as:
 PCs, Networking, Notebooks, Netbooks, Tablets
 Computer Peripherals, Hard Drives, SSD, CD/DVD ROM
 TV, DVD, DVR, Set-Top Box
 Cell Phones, Personal Navigation / GPS
 MP3 Players, Cameras, Video Recorders
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVC2G06
Document number: DS35161 Rev. 6 - 2
1 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
Ordering Information
74LVC2G
Logic Device
XXX -7
Function
74 : Logic Prefix
LVC : 1.65 to 5.5 V
Logic Family
2G : Two Gates
06 :
Package
1-Input
Inverter/ Driver
With Open Drain
Outputs
Device
Package
Code
Package
(Note 4)
74LVC2G06W6-7
W6
SOT26
74LVC2G06DW-7
DW
SOT363
74LVC2G06FW5-7
FW5
X1-DFN1010-6
74LVC2G06FW4-7
FW4
X2-DFN1010-6
74LVC2G06FX4-7
FX4
X2-DFN1409-6
Chip Scale Alternative
74LVC2G06FZ4-7
FZ4
X2-DFN1410-6
Notes:
06
Packing
-7 : 7” Tape & Reel
W6 : SOT26
DW : SOT363
FW5 : X1-DFN1010-6
FW4 : X2-DFN1010-6
FX4 : X2- DFN1409-6
FZ4 : X2- DFN1410-6
Package
Size
2.8mm X 2.2 mm X 1.1mm
0.95 mm lead pitch
2.0mm X 2.0mm X 1.1mm
0.65 mm lead pitch
1.0mm X 1.0mm X 0.5mm
0.35 mm pad pitch
1.0mm X 1.0mm X 0.4mm
0.35 mm pad pitch
1.4mm X 0.9mm X 0.4mm
0.5 mm pad pitch
1.4mm X 1.0mm X 0.4mm
0.5 mm pad pitch
7” Tape and Reel (Note 5)
Quantity
Part Number Suffix
3,000/Tape & Reel
-7
3,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf.
.
Logic Diagram
Pin Descriptions
Pin Name
1A
GND
2A
2Y
Function
Data Input
Ground
Data Input
Data Output Open Drain
VCC
Pin.
1
2
3
4
5
1Y
6
Data Output Open Drain
1A
1
6
3
4
1Y
Supply Voltage
2A
2Y
Function Table
Inputs
A
Output
Y
H
L
L
Z
74LVC2G06
Document number: DS35161 Rev. 6 - 2
2 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
Absolute Maximum Ratings (Notes 6 & 7) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
Description
Human Body Model ESD Protection
Charged Device Model ESD Protection
Machine Model ESD Protection
Rating
2
1
200
Unit
kV
kV
V
Supply Voltage Range
-0.5 to +6.5
V
VI
Input Voltage Range
-0.5 to +6.5
V
VO
Voltage Applied to Output in High Impedance or IOFF State
-0.5 to +6.5
V
VO
Voltage Applied to Output in High or Low State
-0.3 to VCC +0.5
V
VCC
IIK
Input Clamp Current VI < 0
-50
mA
IOK
Output Clamp Current VO < 0
-50
mA
IO
Continuous Output Current
-50
mA
±100
mA
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
Continuous Current Through VDD or GND
TJ
TSTG
Note
6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could
cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range.
Recommended Operating Conditions (Note 8) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
VIH
Parameter
Operating Voltage
High-Level Input Voltage
Min
Max
Unit
Operating
Data Retention Only
1.65
5.5
V
1.5

V
VCC = 1.65V to 1.95V
0.65 X VCC

1.7

2

0.7 X VCC

VCC = 1.65V to 1.95V

0.35 X VCC
VCC = 2.3V to 2.7V

0.7
VCC = 3V to 3.6V

0.8
VCC = 4.5V to 5.5V

0.3 X VCC
VCC = 2.3V to 2.7V
VCC = 3V to 3.6V
VCC = 4.5V to 5.5V
VIL
Low-Level Input Voltage
V
VI
Input Voltage
0
5.5
V
VO
Output Voltage
0
VCC
V
VCC = 1.65V

4
VCC = 2.3V

8
IOL
Δt/ΔV
Low-Level Output Current

16
VCC = 3V

24
VCC = 4.5V

32
VCC = 1.8V ± 0.15V, 2.5V ± 0.2V

20

10

10
-40
+125
Input Transition Rise or Fall Rate VCC = 3.3V ± 0.3V
VCC = 5V ± 0.5V
TA
Note:
V
Operating Free-Air Temperature
mA
ns/V
°C
8. Unused inputs should be held at VCC or Ground.
74LVC2G06
Document number: DS35161 Rev. 6 - 2
3 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
Electrical Characteristics
Symbol
Parameter
Test Conditions
VOL
0.1

0.1
IOL = 4mA
1.65V

0.45

0.70
IOL = 8mA
2.3V

0.3

0.45

0.4

0.60

0.55

0.80
4.5V

0.55

0.80
0 to 5.5V

±5

± 20
μA
± 10
μA
± 20
μA
40
μA
5000
μA
IOL = 16mA
3V
IOL = 32mA
Input Current
VI = 5.5V or GND
IOFF
Z State
Leakage Current
Power Down Leakage
Current
ICC
Supply Current
IOZ
ΔICC
VO = 0 to 5.5V
3.6V

± 10

VI or VO = 5.5V
0V

± 10

1.65V to 5.5V

10
VI = 5.5V or GND, IO = 0
Additional Supply
Current
Unit

IOL = 24mA
II
-40°C to +125°C
Min
Max
1.65V to 5.5V
IOL = 100μA
Low-Level Output
Voltage
-40°C to +85°C
Min
Max
VCC

3V to 5.5V
Input at VCC -0.6V

500
V
Package Characteristics (All typical values are at VCC = 3.3V, TA = +25°C.)
Symbol
CI
θJA
θJC
Note:
Parameter
Package
Input Capacitance
Min
Typ
Max
Unit

3.5

pF
SOT26

204

SOT363

371


430


450

X1-DFN1010-6

495

X2-DFN1010-6

510

SOT26

52

SOT363

143

X2-DFN1410-6

190


225

X1-DFN1010-6

245

X2-DFN1010-6

250

Typical of All Packages
Thermal Resistance Junction-to-Ambient
Thermal Resistance Junction-to-Case
Conditions
Vcc = 3.3V
VI = VCC or GND
X2-DFN1410-6
(Note 9)
X2-DFN1409-6
(Note 9)
X2-DFN1409-6
°C/W
°C/W
9. Test condition for all packages: Device mounted on FR-4 substrate PC board, 2oz copper with minimum recommended pad layout.
Switching Characteristics
TA = -40°C to +85°C, CL = 30 or 50pF (See Figure 1)
Parameter
tpd
From
(Input)
TO
(OUTPUT)
A
Y
VCC = 1.8V
± 0.15V
Min
0.5
Max
6.5
VCC = 2.5V
± 0.2V
Min
Max
0.5
3.9
VCC = 3.3V
± 0.3V
Min
0.5
Max
3.4
VCC = 5V
± 0.5V
Min
Max
0.5
2.9
Unit
ns
TA = -40°C to +125°C, CL = 30 or 50pF (See Figure 1)
Parameter
From
(Input)
TO
(OUTPUT)
tpd
A
Y
74LVC2G06
Document number: DS35161 Rev. 6 - 2
VCC = 1.8V
± 0.15V
Min
Max
VCC = 2.5V
± 0.2V
Min
Max
VCC = 3.3V
± 0.3V
Min
Max
VCC = 5V
± 0.5V
Min
Max
0.5
0.5
0.5
0.5
8.2
4 of 13
www.diodes.com
4.9
4.3
3.7
Unit
ns
March 2015
© Diodes Incorporated
74LVC2G06
Operating Characteristics
TA = +25°C
Parameter
Power Dissipation
Capacitance
Cpd
Test
Conditions
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC= 5V
Typ
Typ
Typ
Typ
f = 10 MHz
3
3
4
6
Unit
pF
Parameter Measurement Information
RL
From Output
Under Test
CL
VLOAD
RL
TEST
Condition
tPLZ (See Notes D and E)
tPZL (See Notes D and F)
Vload
Vload
(see Note A)
Inputs
VCC
V∆
30pF
1kΩ
0.15V
30pF
500Ω
0.15V
50pF
50pF
500Ω
500Ω
0.3V
0.3V
VLOAD
CL
≤2ns
VCC/2
2 X VCC
≤2ns
VCC/2
2 X VCC
≤2.5ns
≤2.5ns
1.5 V
6V
VCC/2
2 X VCC
tr/tf
1.8V±0.15V
VCC
2.5V±0.2V
VCC
3.3V±0.3V
5V±0.5V
3V
VCC
RL
VM
VI
Vl
tW
Vl
Input
VM
VM
VM
0V
VM
0V
Voltage Waveform
Pulse Duration
Output
Control
Output
Waveform
tPZL
tPLZ
VLOAD/2
VM
VOL + V
VOL
Voltage Waveform
Propagation Delay Times
Figure 1 Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz
C. The inputs are measured one at a time with one transition per measurement.
D. For the open drain device tPLZ and tPZL are the same as tPD.
E. tPZL is measured at VM.
F. tPLZ is measured at VOL +V∆.
74LVC2G06
Document number: DS35161 Rev. 6 - 2
5 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
Marking Information
SOT26, SOT363
5
7
6
4
7
(1)
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal Code
XX Y W X
1
2
3
Part Number
Package
Identification Code
74LVC2G06W6-7
74LVC2G06DW-7
SOT26
SOT363
Z3
Z3
Part Number
Package
Identification Code
74LVC2G06FW4-7
74LVC2G06FW5-7
74LVC2G06FX4-7
74LVC2G06FZ4-7
X2-DFN1010-6
X1-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
Z3
W3
X3
Z3
(2) X1-DFN1010-6, X2-DFN1010-6, X2-DFN1409-6, X2-DFN1410-6
74LVC2G06
Document number: DS35161 Rev. 6 - 2
6 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
SOT26
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A
SOT26
Dim Min Max Typ
A
0.35 0.50 0.38
B
1.50 1.70 1.60
C
2.70 3.00 2.80
D

 0.95
H
2.90 3.10 3.00
J
0.013 0.10 0.05
K
1.00 1.30 1.10
L
0.35 0.55 0.40
M
0.10 0.20 0.15
0°
8°


All Dimensions in mm
B C
H
K
M
J
C2
Z
L
D
C2
Dimensions Value (in mm)
Z
3.20
G
1.60
X
0.55
Y
0.80
C1
2.40
C2
0.95
C1
G
Y
X
74LVC2G06
Document number: DS35161 Rev. 6 - 2
7 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
SOT363
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A
SOT363
Dim Min Max Typ
A 0.10 0.30 0.25
B 1.15 1.35 1.30
C 2.00 2.20 2.10
D
0.65 Typ
F 0.40 0.45 0.425
H 1.80 2.20 2.15
J
0
0.10 0.05
K 0.90 1.00 1.00
L 0.25 0.40 0.30
M 0.10 0.22 0.11
0°
8°

All Dimensions in mm
B C
H
K
M
J
D
L
F
C2
C2
Dimensions
Z
Z
G
X
Y
C1
C2
C1
G
Y
Value
(in mm)
2.5
1.3
0.42
0.6
1.9
0.65
X
74LVC2G06
Document number: DS35161 Rev. 6 - 2
8 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
X1-DFN1010-6 (Type B)
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
Seating Plane
X1-DFN1010-6
(Type B)
Dim Min Max
Typ
A
-
0.50
0.39
A1
0.04
b
0.12 0.20
0.15
D
0.95 1.050 1.00
E
0.95 1.050 1.00
e
0.35 BSC
e1
0.55 BSC
L3 0.27 0.30
0.30
L3a 0.32 0.40
0.35
All Dimensions in mm
D
e
L3a
L3(5x)
e1
E
(Pin #1 ID)
b
X1
C
Y(4x)
Y2
Y3
G
G1
Y1
Pin1
74LVC2G06
Document number: DS35161 Rev. 6 - 2
Dimensions
C
G
G1
X
X1
Y
Y1
Y2
Y3
Value
(in mm)
0.350
0.150
0.150
0.200
0.900
0.500
0.525
0.475
1.150
X
9 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
X2-DFN1010-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
A1
A
A3
X2-DFN1010-6
Dim Min Max
Typ
A
–– 0.40
0.39
A1 0.00 0.05
0.02
A3
––
––
0.13
b
0.14 0.20
0.17
b1 0.05 0.15
0.10
D
0.95 1.05
1.00
E
0.95 1.05
1.00
e
––
––
0.35
L
0.35 0.45
0.40
K
0.15 ––
––
Z
––
––
0.065
All Dimensions in mm
D
(Pin #1 ID)
e
b1
E
K
L(6x)
b(6x)
Z(4x)
X1
C
Y (6x)
Y1
Dimensions
Value
(in mm)
C
G
X
X1
Y
Y1
0.350
0.150
0.200
0.900
0.550
1.250
1
G(4x)
74LVC2G06
Document number: DS35161 Rev. 6 - 2
X(6x)
10 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
X2-DFN1409-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A3
A1
A
Seating Plane
D
(Pin #1 ID)
e1
Ø(6x)
e2
E
Z1(4x)
X2-DFN1409-6
Dim Min Max Typ
A
—
0.40 0.39
A1
0
0.05 0.02
A3
—
—
0.13
Ø
0.20 0.30 0.25
D
1.35 1.45 1.40
E
0.85 0.95 0.90
e1
—
—
0.50
e2
—
—
0.50
Z1
—
—
0.075
Z2
—
—
0.075
All Dimensions in mm
Z2(4x)
C
Dimensions
D (6x)
Y
C1
G1
C
C1
D
G
G1
X
Y
Value
(in mm)
1.000
0.500
0.300
0.200
0.200
0.400
0.150
Pin1
X
74LVC2G06
Document number: DS35161 Rev. 6 - 2
G
11 of 13
www.diodes.com
March 2015
© Diodes Incorporated
74LVC2G06
X2-DFN1410-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A3
A
Seating Plane
D
e
(Pin #1 ID)
L(6x)
X2-DFN1410-6
Dim
Min
Max
Typ
A
––
0.40 0.39
A1
0.00 0.05 0.02
A3
––
––
0.13
b
0.15 0.25 0.20
D
1.35 1.45 1.40
E
0.95 1.05 1.00
e
––
––
0.50
L
0.25 0.35 0.30
Z
––
––
0.10
Z1
0.045 0.105 0.075
All Dimensions in mm
E
Z1(4x)
Z(4x)
b(6x)
X1
C
Y(6x)
Dimensions
C
G
X
X1
Y
Y1
Y1
1
74LVC2G06
Document number: DS35161 Rev. 6 - 2
G(4x)
X(6x)
12 of 13
www.diodes.com
Value
(in mm)
0.500
0.250
0.250
1.250
0.525
1.250
March 2015
© Diodes Incorporated
74LVC2G06
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
74LVC2G06
Document number: DS35161 Rev. 6 - 2
13 of 13
www.diodes.com
March 2015
© Diodes Incorporated