74LVC2G17

74LVC2G17
DUAL SCHMITT TRIGGER BUFFERS
Description
Pin Assignments
The 74LVC2G17 is a dual Schmitt trigger buffer gate with standard
( Top View )
( Top View )
push-pull outputs. The device is designed for operation with a
power supply range of 1.65V to 5.5V. The inputs are tolerant to
6 1Y
1A 1
5.5V allowing this device to be used in a mixed voltage
environment. The device is fully specified for partial power down
GND 2
applications using IOFF. The IOFF circuitry disables the output
2A 3
5 Vcc
4 2Y
preventing damaging current backflow when the device is powered
1A
1
6 1Y
GND
2
5 Vcc
2A
3
4 2Y
X2-DFN1410-6
SOT26 / 363
down.
( Top View)
The gate performs the positive Boolean function:
( Bottom View )
YA
2A 3
4 2Y
1A
1
6
1Y
GND
2A
2
5
Vcc
3
4
2Y
X1-DFN1010-6
GND 2
Features

Wide Supply Voltage Range from 1.65V to 5.5V

±24mA Output Drive at 3.0V

CMOS Low Power Consumption

IOFF Supports Partial-Power-Down Mode Operation

Inputs Accept up to 5.5V

ESD Protection Tested per JESD 22
1A 1
5 Vcc
6 1Y
DFN1409
Chip Scale
Alternative
( Top View )
1A
6 1Y
1
GND 2
5 Vcc
2A 3
4 2Y
X2-DFN1010-6
Applications

Exceeds 200-V Machine Model (A115)

Exceeds 2000-V Human Body Model (A114)


Voltage Level Shifting
Exceeds 1000-V Charged Device Model (C101)


General Purpose Logic
Latch-Up Exceeds 100mA per JESD 78, Class I


Power Down Signal Isolation
DFN1409 Package Designed as a Direct Replacement for Chip

Wide Array of Products Such As:
Scale Packaging

PCs, Networking, Notebooks, Netbooks, Tablets
Range of Package Options SOT26, SOT363, X1-DFN1010-6,

Computer Peripherals, Hard Drives, SSD, CD/DVD ROM
X2-DFN1010-6, X2-DFN1409-6, and X2-DFN1410-6


TV, DVD, DVR, Set Top Box
Leadless Packages Named per JESD30E


Cell Phones, Personal Navigation / GPS
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)

Halogen and Antimony Free. “Green” Device (Note 3)

MP3 Players ,Cameras, Video Recorders

Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green"
and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
74LVC2G17
Document number: DS35164 Rev. 7 - 2
1 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
Ordering Information
74LVC2G
Logic Device
17
XXX -7
Function
74 : Logic Prefix
LVC : 1.65V to 5.5V
Logic Family
2G : Two Gates
17 :
Package
Buffer/ Driver
With Schmitt
Trigger Inputs
Part Number
Package Code
Package
(Note 4)
74LVC2G17W6-7
W6
SOT26
74LVC2G17DW-7
DW
SOT363
74LVC2G17FW5-7
FW5
X1-DFN1010-6
74LVC2G17FW4-7
FW4
X2-DFN1010-6
74LVC2G17FX4-7
FX4
X2-DFN1409-6
Chip Scale Alternative
74LVC2G17FZ4-7
FZ4
X2-DFN1410-6
Notes:
Packing
-7 : 7” Tape & Reel
W6 : SOT26
DW : SOT363
FW5 : X1-DFN1010-6
FW4 : X2-DFN1010-6
FX4 : X2- DFN1409-6
FZ4 : X2- DFN1410-6
7” Tape and Reel (Note 5)
Quantity
Part Number Suffix
Package
Size
2.8mm X 2.2 mm X 1.1mm
0.95 mm lead pitch
2.0mm X 2.0mm X 1.1mm
0.65 mm lead pitch
1.0mm X 1.0mm X 0.5mm
0.35 mm pad pitch
1.0mm X 1.0mm X 0.4mm
0.35 mm pad pitch
1.4mm X 0.9mm X 0.4mm
0.5 mm pad pitch
1.4mm X 1.0mm X 0.4mm
0.5 mm pad pitch
3000/Tape & Reel
-7
3000/Tape & Reel
-7
5000/Tape & Reel
-7
5000/Tape & Reel
-7
5000/Tape & Reel
-7
5000/Tape & Reel
-7
4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf.
.
Pin Descriptions
Pin Name
1A
GND
2A
2Y
VCC
Pin Number
1
2
3
4
5
1Y
6
Logic Diagram
Function
Data Input
Ground
Data Input
Data Output
1A
1
6
3
4
1Y
Supply Voltage
Data Output
2A
2Y
Function Table
Inputs
A
H
L
Output
Y
H
L
74LVC2G17
Document number: DS35164 Rev. 7 - 2
2 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
Absolute Maximum Ratings (Notes 6 and 7) (@TA = +25°C, unless otherwise specified.)
Symbol
ESD HBM
ESD CDM
ESD MM
VCC
Parameter
Rating
Unit
2
1
200
kV
kV
V
Supply Voltage Range
-0.5 to +6.5
V
Human Body Model ESD Protection
Charged Device Model ESD Protection
Machine Model ESD Protection
VI
Input Voltage Range
-0.5 to +6.5
V
VO
Voltage Applied to Output in High Impedance or IOFF State
-0.5 to +6.5
V
VO
Voltage Applied to Output in High or Low State
-0.3 to VCC +0.5
V
IIK
Input Clamp Current VI < 0
-50
mA
IOK
Output Clamp Current VO < 0
-50
mA
IO
Continuous Output Current
-50
mA
—
Continuous Current Through VDD or GND
±100
mA
TJ
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
TSTG
Note:
6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be
within recommend values.
7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause
a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range.
Recommended Operating Conditions (Note 8) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
Operating Voltage
VI
Input Voltage
VO
Output Voltage
IOH
IOL
Δt/ΔV
TA
Note:
Parameter
High-Level Output Current
Low-Level Output Current
Input Transition Rise or Fall Rate
Operating Free-air Temperature
Operating
Data retention only
Min
Max
Unit
1.65
1.5
5.5
—
V
V
0
5.5
V
V
0
VCC
VCC = 1.65V
—
-4
VCC = 2.3V
—
-8
VCC = 3V
—
—
-16
-24
VCC = 4.5V
—
-32
VCC = 1.65V
—
4
VCC = 2.3V
—
8
VCC = 3V
—
—
16
24
VCC = 4.5V
—
32
VCC = 1.8V ± 0.15V, 2.5V ± 0.2V
—
20
VCC = 3.3V ± 0.3V
—
10
VCC = 5V ± 0.5V
—
5
—
-40
+125
mA
mA
ns/V
°C
8. Unused inputs should be held at VCC or Ground.
74LVC2G17
Document number: DS35164 Rev. 7 - 2
3 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
VT+
VT-
∆VT
Parameter
Positive-going Input
Threshold Voltage
Negative-going Input
Threshold Voltage
Hysteresis (VT+ - VT-)
—
—
High-Level Output Voltage
Low-Level Output Voltage
0.70
1.50
0.70
1.70
2.3V
1.00
1.80
1.00
2.00
3V
1.30
2.20
1.30
2.40
4.5V
1.90
3.10
1.90
3.30
5.5V
2.20
3.60
2.20
3.80
1.65V
0.25
0.90
0.39
1.10
2.3V
0.40
1.15
0.25
0.87
1.50
0.40
1.35
2.00
0.60
1.70
5.5V
1.20
2.30
1.00
2.50
1.8V
0.15
1.00
0.37
1.20
2.3V
0.25
1.10
0.15
1.30
3V
0.40
1.20
0.40
1.40
4.5V
0.60
1.50
0.60
1.70
5.5V
0.70
1.70
0.70
1.90
1.65V to 4.5V
VCC – 0.1
—
VCC – 0.1
—
IOH = -4mA
1.65V
1.2
—
0.95
—
IOH = -8mA
2.3V
1.9
—
1.7
—
2.4
—
1.9
—
2.3
—
2.0
—
—
3.4
—
—
IOH = -16mA
3V
IOH = -32mA
4.5V
3.8
IOL = 100μA
1.65V to 4.5V
—
0.1
—
0.10
IOL = 4mA
1.65V
—
0.45
—
0.70
IOL = 8mA
2.3V
—
0.3
—
0.45
—
0.4
—
0.60
IOL = 16mA
3V
Input Current
VI = 5.5V or GND
IOFF
Power Down Leakage
Current
VI or VO = 5.5V
ICC
Supply Current
VI = 5.5V or GND, IO = 0
Document number: DS35164 Rev. 7 - 2
1.8V
1.00
IOL = 32mA
74LVC2G17
Max
0.60
IOL = 24mA
II
Min
3V
IOH = -24mA
VOL
-40°C to +125°C
Max
4.5V
IOH = -100μA
VOH
-40°C to +85°C
Min
VCC
Test Conditions
Unit
V
V
V
V
V
—
0.55
—
0.80
4.5V
—
0.55
—
0.80
0 to 5.5V
—
±5
—
± 20
μA
0
—
± 10
—
± 20
μA
1.65V to 5.5V
—
10
—
40
μA
4 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
Package Characteristics ((@TA = +25°C, VCC = 3.3V, unless otherwise specified.)
Symbol
CI
Parameter
Package
Input Capacitance
Thermal Resistance Junction-toCase
θJC
Note:
Min
Typ
Max
Unit
—
3.5
—
pF
SOT26
—
204
—
SOT363
—
371
—
—
430
—
—
450
—
X1-DFN1010-6
—
495
—
X2-DFN1010-6
—
510
—
SOT26
—
52
—
SOT363
—
143
—
—
190
—
—
225
—
X1-DFN1010-6
—
245
—
X2-DFN1010-6
—
250
—
VCC = 3.3V
VI = VCC or GND
Typical of all packages
Thermal Resistance Junction-toAmbient
θJA
Conditions
X2-DFN1410-6
(Note 9)
X2-DFN1409-6
X2-DFN1410-6
(Note 9)
X2-DFN1409-6
°C/W
°C/W
9. Test condition for all packages: : Device mounted on FR-4 substrate PC board, 2oz copper with minimum recommended pad layout.
Switching Characteristics
TA = -40°C to +85°C, CL = 30 or 50pF (see Figure 1)
Parameter
tPD
From
(Input)
VCC = 1.8V
± 0.15V
TO
(OUTPUT)
A
VCC = 2.5V
± 0.2V
VCC = 3.3V
± 0.3V
VCC = 5V
± 0.5V
Unit
Min
Max
Min
Max
Min
Max
Min
Max
0.5
10.5
0.5
6.5
0.5
5.7
0.5
4.3
Y
ns
TA = -40°C to +125°C, CL = 30 or 50pF (see Figure 1)
Parameter
tPD
From
(Input)
TO
(OUTPUT)
A
Y
VCC = 1.8V
± 0.15V
VCC = 2.5V
± 0.2V
VCC = 3.3V
± 0.3V
VCC = 5V
± 0.5V
Unit
Min
Max
Min
Max
Min
Max
Min
Max
0.5
13.1
0.5
8.5
0.5
7.1
0.5
5.4
ns
Operating Characteristics
TA = +25°C
Parameter
CPD
Power Dissipation
Capacitance
74LVC2G17
Document number: DS35164 Rev. 7 - 2
Test
Conditions
VCC = 1.8V
VCC = 2.5V
VCC = 3.3V
VCC= 5V
Typ
Typ
Typ
Typ
f = 10MHz
17
19
20
21
5 of 14
www.diodes.com
Unit
pF
November 2015
© Diodes Incorporated
74LVC2G17
Parameter Measurement Information
From Output
Under Test
C
RL
L
(See Note A)
Inputs
VCC
VM
CL
≤2ns
VCC/2
30pF
1kΩ
≤2ns
VCC/2
30pF
500Ω
≤2.5ns
1.5V
50pF
500Ω
≤2.5ns
VCC/2
50pF
500Ω
VI
tR/tF
1.8V±0.15V
VCC
2.5V±0.2V
VCC
3.3V±0.3V
3V
5V±0.5V
VCC
RL
tW
Vl
Vl
Input
VM
Input
VM
VM
0V
VM
0V
Voltage Waveform Pulse Duration
tPLH
tPHL
VOH
Output
VM
VM
VOL
tPHL
tPLH
VOH
Output
VM
VM
VOL
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1. Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD.
74LVC2G17
Document number: DS35164 Rev. 7 - 2
6 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
Marking Information
(1) SOT26, SOT363
7
4
7
5
6
XX Y W X
1
Part Number
74LVC2G17W6-7
74LVC2G17DW-7
2
3
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal Code
Package
SOT26
SOT363
Identification Code
Z6
Z6
(2) X1-DFN1010-6, X2-DFN1010-6, X2-DFN1409-6, X2-DFN1410-6
Part Number
74LVC2G17FW4-7
74LVC2G17FW5-7
74LVC2G17FX4-7
74LVC2G17FZ4-7
74LVC2G17
Document number: DS35164 Rev. 7 - 2
Package
X2-DFN1010-6
X1-DFN1010-6
X2-DFN1409-6
X2-DFN1410-6
7 of 14
www.diodes.com
Identification Code
Z6
W6
X6
Z6
November 2015
© Diodes Incorporated
74LVC2G17
SOT26
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
D
E1
E
b
a1
e1
A2
A3
A1
Seating Plane
e
L
c
a
C1
Y1
G
C
Y
Dimensions Value (in mm)
C
2.40
C1
0.95
G
1.60
X
0.55
Y
0.80
Y1
3.20
X
74LVC2G17
Document number: DS35164 Rev. 7 - 2
8 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
SOT363
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
E
E1
F
SOT363
Dim Min Max
Typ
A1 0.00 0.10
0.05
A2 0.90 1.00
1.00
b
0.10 0.30
0.25
c
0.10 0.22
0.11
D
1.80 2.20
2.15
E
2.00 2.20
2.10
E1 1.15 1.35
1.30
e
0.650 BSC
F
0.40 0.45 0.425
L
0.25 0.40
0.30
a
8°
All Dimensions in mm
b
D
A2
c
L
e
A1
a
C
G
Y1
Y
X
74LVC2G17
Document number: DS35164 Rev. 7 - 2
9 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
X1-DFN1010-6 (Type B)
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
Seating Plane
X1-DFN1010-6
(Type B)
Dim Min Max
Typ
A
-
0.50
0.39
A1
0.04
b
0.12 0.20
0.15
D
0.95 1.050 1.00
E
0.95 1.050 1.00
e
0.35 BSC
e1
0.55 BSC
L3 0.27 0.30
0.30
L3a 0.32 0.40
0.35
All Dimensions in mm
D
e
L3a
L3(5x)
e1
E
(Pin #1 ID)
b
X1
C
Y(4x)
Y2
Y3
G
G1
Y1
Pin1
74LVC2G17
Document number: DS35164 Rev. 7 - 2
Dimensions
C
G
G1
X
X1
Y
Y1
Y2
Y3
Value
(in mm)
0.350
0.150
0.150
0.200
0.900
0.500
0.525
0.475
1.150
X
10 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
X2-DFN1010-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
A1
A
A3
X2-DFN1010-6
Dim Min Max
Typ
A
–– 0.40
0.39
A1 0.00 0.05
0.02
A3
––
––
0.13
b
0.14 0.20
0.17
b1 0.05 0.15
0.10
D
0.95 1.05
1.00
E
0.95 1.05
1.00
e
––
––
0.35
L
0.35 0.45
0.40
K
0.15 ––
––
Z
––
––
0.065
All Dimensions in mm
D
(Pin #1 ID)
e
b1
E
K
L(6x)
b(6x)
Z(4x)
X1
C
Y (6x)
Y1
Dimensions
Value
(in mm)
C
G
X
X1
Y
Y1
0.350
0.150
0.200
0.900
0.550
1.250
1
G(4x)
74LVC2G17
Document number: DS35164 Rev. 7 - 2
X(6x)
11 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
X2-DFN1409-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A3
A
Seating Plane
D
(Pin #1 ID)
e1
Ø (6x)
e2
E
Z1(4x)
X2-DFN1409-6
Dim Min Max Typ
A
—
0.40 0.39
A1
0
0.05 0.02
A3
—
—
0.13
Ø
0.20 0.30 0.25
D
1.35 1.45 1.40
E
0.85 0.95 0.90
e1
—
—
0.50
e2
—
—
0.50
Z1
—
—
0.075
Z2
—
—
0.075
All Dimensions in mm
Z2(4x)
C
D (6x)
Dimensions
G1
C
C1
D
G
G1
X
Y
Y
C1
Pin1
X
74LVC2G17
Document number: DS35164 Rev. 7 - 2
G
12 of 14
www.diodes.com
Value
(in mm)
1.000
0.500
0.300
0.200
0.200
0.400
0.150
November 2015
© Diodes Incorporated
74LVC2G17
X2-DFN1410-6
Package Outline Dimensions and Suggested Pad Layout
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A3
A1
A
X2-DFN1410-6
Dim
Min
Max
Typ
A
––
0.40 0.39
A1
0.00 0.05 0.02
A3
––
––
0.13
b
0.15 0.25 0.20
D
1.35 1.45 1.40
E
0.95 1.05 1.00
e
––
––
0.50
L
0.25 0.35 0.30
Z
––
––
0.10
Z1
0.045 0.105 0.075
All Dimensions in mm
Seating Plane
D
e
(Pin #1 ID)
L(6x)
E
Z1(4x)
Z(4x)
b(6x)
X1
C
Dimensions
Y
C
G
X
X1
Y
Y1
Y1
1
74LVC2G17
Document number: DS35164 Rev. 7 - 2
G
Value
(in mm)
0.500
0.250
0.250
1.250
0.525
1.250
X
13 of 14
www.diodes.com
November 2015
© Diodes Incorporated
74LVC2G17
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
74LVC2G17
Document number: DS35164 Rev. 7 - 2
14 of 14
www.diodes.com
November 2015
© Diodes Incorporated