74AUP2G34 DUAL BUFFERS Description Pin Assignments The Advanced Ultra Low Power (AUP) CMOS logic family is designed for low power and extended battery life in portable applications. ADVANCED INFORMATION ADVANCEDINFORMATION (Top View) The 74AUP2G34 is composed of two buffers with standard push-pull outputs designed for operation over a power supply range of 0.8V to 3.6V. The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. perform the positive Boolean function: The gates 6 1Y 1A 1 GND 2 5 Vcc 2A 3 4 2Y YA (Top View) 1A 1 6 1Y GND 2 5 Vcc 2A 3 4 2Y X2-DFN1410-6 SOT363 Features Advanced Ultra Low Power (AUP) CMOS Supply Voltage Range from 0.8V to 3.6V ±4mA Output Drive at 3.0V Low Static Power Consumption ICC < 0.9µA Low Dynamic Power Consumption CPD = 6pF Typical at 3.6V Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for Slower Input Rise and Fall Time. The Hysteresis is Typically 250mV at VCC = 3.0V IOFF Supports Partial-Power-Down Mode Operation (Top View) 1 6 1Y GND 2 5 Vcc 2A 3 4 2Y X2-DFN1010-6 ESD Protection per JESD 22 Exceeds 200-V Machine Model (A115) Exceeds 2000-V Human Body Model (A114) Exceeds 1000-V Charged Device Model (C101) Latch-Up Exceeds 100mA per JESD 78, Class I Leadless packages per JESD30E DFN1410 denoted as X2-DFN1410-6 DFN1010 denoted as X2-DFN1010-6 DFN0910 denoted as X2-DFN0910-6 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) Notes: 1A (Top View) 1A 1 1Y GND 2 5 Vcc 2A 3 4 2Y X2-DFN0910-6 Applications Suited for Battery and Low Power Needs Wide array of products such as: PCs, Networking, Notebooks, Netbooks, PDAs Tablet Computers, E-readers Computer Peripherals, Hard Drives, CD/DVD ROM TV, DVD, DVR, Set-Top Box Cell Phones, Personal Navigation / GPS MP3 Players ,Cameras, Video Recorders 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 74AUP2G34 Document number: DS35514 Rev. 6 - 2 1 of 13 www.diodes.com November 2014 © Diodes Incorporated 74AUP2G34 Ordering Information 74 AUP2G 34 XXX -7 ADVANCED INFORMATION ADVANCEDINFORMATION Logic Device Function 74 : Logic Prefix AUP : 0.8 to 3.6 V Logic Family 2G : Dual Gate 34: 1-Input Buffer/ Driver Part Number Package Code Package (Notes 4 & 5) 74AUP2G34DW-7 DW SOT363 74AUP2G34FW3-7 FW3 X2-DFN0910-6 74AUP2G34FW4-7 FW4 X2-DFN1010-6 74AUP2G34FZ4-7 FZ4 X2-DFN1410-6 Notes: Package Packing DW : SOT363 FW3 : X2-DFN0910-6 FW4 : X2-DFN1010-6 FZ4 : X2- DFN1410-6 Package Size 2.0mm X 2.0mm X 1.1mm 0.65 mm lead pitch 0.9mm X 1.0mm X 0.35mm 0.35 mm pad pitch 1.0mm X 1.0mm X 0.4mm 0.35 mm pad pitch 1.4mm X 1.0mm X 0.4mm 0.5 mm pad pitch -7 : 7” Tape & Reel 7” Tape and Reel Quantity Part Number Suffix 3000/Tape & Reel -7 5000/Tape & Reel -7 5000/Tape & Reel -7 5000/Tape & Reel -7 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf. Pin Descriptions Pin Name Pin No. 1A GND 2A 2Y 1 2 3 4 Data Input Ground Data Input Data Output Function VCC 5 Supply Voltage 1Y 6 Data Output Logic Diagram 1A 2A 1 6 3 4 1Y 2Y Function Table Inputs A Outputs Y H L H L 74AUP2G34 Document number: DS35514 Rev. 6 - 2 2 of 13 www.diodes.com November 2014 © Diodes Incorporated 74AUP2G34 Absolute Maximum Ratings (Notes 6,7) (@TA = +25°C, unless otherwise specified.) Symbol ADVANCED INFORMATION ADVANCEDINFORMATION ESD HBM ESD CDM ESD MM Parameter Human Body Model ESD Protection Charged Device Model ESD Protection Machine Model ESD Protection Rating Unit 2 1 200 kV kV V Supply Voltage Range -0.5 to +4.6 V VI Input Voltage Range -0.5 to +4.6 V VO Voltage Applied to Output in High or Low State -0.5 to VCC +0.5 V VCC IIK Input Clamp Current VI < 0 50 mA IOK Output Clamp Current (VO < 0 ) -50 mA IO Continuous Output Current (VO = 0 to VCC) ±20 mA ICC Continuous Current Through VCC 50 mA IGND Continuous Current Through GND -50 mA Operating Junction Temperature -40 to +150 °C Storage Temperature -65 to +150 °C TJ TSTG Notes: 6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range. Recommended Operating Conditions (Note 8) (@TA = +25°C, unless otherwise specified.) Symbol VCC VI Input Voltage VO Output Voltage IOH IOL Δt/ΔV TA Note: Parameter — Operating Voltage High-Level Output Current Low-Level Output Current Min Max Unit 0.8 3.6 V 0 3.6 V 0 VCC V VCC = 0.8V — -20 µA VCC = 1.1V — -1.1 VCC = 1.4V — -1.7 VCC = 1.65V — -1.9 VCC = 2.3V — -3.1 VCC = 3.0V — -4 VCC = 0.8V — 20 VCC = 1.1V — 1.1 VCC = 1.4V — 1.7 VCC = 1.65V — 1.9 VCC = 2.3V — 3.1 VCC = 3.0V — 4 — 200 ns/V -40 +125 °C Input Transition Rise or Fall Rate VCC = 0.8V to 3.6V Operating Free-Air Temperature — mA µA mA 8. Unused inputs should be held at VCC or Ground. 74AUP2G34 Document number: DS35514 Rev. 6 - 2 3 of 13 www.diodes.com November 2014 © Diodes Incorporated 74AUP2G34 Electrical Characteristics ADVANCED INFORMATION ADVANCEDINFORMATION Symbol Parameter VIH High-Level Input Voltage VIL Low-Level Input Voltage (@TA = +25°C, unless otherwise specified.) Test Conditions VCC — — — — — — — — Max 0.8V to 1.65V 1.65V to 1.95V 2.3V to 2.7V 3.0V to 3.6V 0.8V to 1.65V 1.65V to 1.95V 2.3V to 2.7V 3.0V to 3.6V 0.80 X VCC 0.65 X VCC 1.6 2.0 — — — — 0.80 X VCC 0.65 X VCC 1.6 2.0 — — — — 0.8V to 3.6V VCC – 0.1 — — — — 0.30 X VCC 0.35 X VCC 0.7 0.9 — VCC – 0.1 — — — — 0.30 X VCC 0.35 X VCC 0.7 0.9 — 1.1V 0.75 X VCC — 0.7 X VCC — IOH = -1.7mA 1.4V 1.11 — 1.03 — IOH = -1.9mA 1.65V 1.32 — 1.3 — 2.05 — 1.97 — 1.9 — 1.85 — 2.72 — 2.67 — 2.6 — 2.55 — IOL = 20μA 0.8V to 3.6V — 0.1 — 0.1 IOL = 1.1mA 1.1V — 0.3 X VCC — 0.3 X VCC IOL = 1.7mA 1.4V — 0.31 — 0.37 IOL = 1.9mA 1.65V — 0.31 — 0.35 — 0.31 — 0.33 — 0.44 — 0.45 — 0.31 — 0.33 — 0.44 — 0.45 0V to 3.6V — ± 0.1 — ± 0.5 μA 0V — ± 0.2 — ± 0.6 μA 0V to 0.2V — ± 0.2 — ± 0.6 μA 0.8V to 3.6V — 0.5 — 0.9 μA 3.3V — 40 — 50 μA IOH = -2.3mA IOH = -3.1mA IOH = -2.7mA IOH = -4mA VOL Low-Level Input Voltage IOL = 2.3mA IOL = 3.1mA IOL = 2.7mA II IOFF ΔIOFF ICC ΔICC Input Current IOL = 4mA A or B Input VI = GND to 3.6V Power Down VI or VO = 0V to 3.6V Leakage Current Delta Power Down Leakage VI or VO = 0V to 3.6V Current Supply Current Unit Min IOH = -1.1mA High-Level Output Voltage TA = -40 to +85°C Max IOH = -20μA VOH TA = +25°C Min VI = GND or VCC, IO = 0 One input at VCC –0.6V Additional Supply Other input at VCC or Current GND 74AUP2G34 Document number: DS35514 Rev. 6 - 2 2.3V 3V 2.3V 3V 4 of 13 www.diodes.com V V V V November 2014 © Diodes Incorporated 74AUP2G34 Electrical Characteristics ADVANCED INFORMATION ADVANCEDINFORMATION Symbol (@TA = +25°C, unless otherwise specified.) Parameter VIH High-Level Input Voltage VIL Low-Level Input Voltage High Level Output Voltage VOH Test Conditions VCC — — — — — — — — 0.80 X VCC 0.70 X VCC 1.6 2.0 — — — — IOH = -20μA 0.8V to 1.65V 1.65V to 1.95V 2.3V to 2.7V 3.0V to 3.6V 0.8V to 1.65V 1.65V to 1.95V 2.3V to 2.7V 3.0V to 3.6V 0.8V to 3.6V VCC – 0.11 — — — — 0.25 X VCC 0.30 X VCC 0.7 0.9 — IOH = -1.1mA 1.1V 0.6 X VCC — IOH = -1.7mA 1.4V 0.93 — IOH = -1.9mA 1.65V 1.17 — 1.77 — 1.67 — 2.40 — 2.30 — IOH = -2.3mA 2.3V IOH = -2.7mA 3V IOH = -4mA Low-Level Input Voltage ΔIOFF ICC ΔICC V 0.8V to 3.6V — 0.11 1.1V — 0.33 X VCC IOL = 1.7mA 1.4V — 0.41 IOL = 1.9mA 1.65V — 0.39 — 0.36 — 0.50 — 0.36 — 0.50 0V to 3.6V — ± 0.75 μA 0V — ± 1.0 μA 2.3V IOL = 2.7mA IOFF V IOL = 1.1mA IOL = 2.3mA 3V IOL = 4mA A or B Input VI = GND to 3.6V Input Current V IOL = 20μA IOL = 3.1mA II Unit Max IOH = -3.1mA VOL TA = -40 to +125°C Min V Power Down Leakage Current VI or VO = 0V to 3.6V Delta Power Down Leakage Current VI or VO = 0V to 3.6V 0V to 0.2V — ± 2.5 μA Supply Current VI = GND or VCC, IO = 0 0.8V to 3.6V — 1.4 μA Additional Supply Current Input at VCC –0.6V Other input at VCC or GND 3.3V — 75 μA Operating and Package Characteristics TA = +25°C Parameter Test Conditions VCC Typ Unit 5.1 5.2 5.2 5.5 5.7 6.0 pF Cpd Power dissipation capacitance f = 1MHz No Load 0.8V 1.2V ± 0.1V 1.5V ± 0.1V 1.8V ± 0.15V 2.5V ± 0.2V 3.3V ± 0.3V CI Input Capacitance Vi = VCC or GND 0V or 3.3V 2.0 pF CO Output Capacitance VO = VCC or GND 0V 2.0 pF 74AUP2G34 Document number: DS35514 Rev. 6 - 2 5 of 13 www.diodes.com November 2014 © Diodes Incorporated 74AUP2G34 Switching Characteristics CL = 5pF see Figure 1 ADVANCED INFORMATION ADVANCEDINFORMATION Parameter From Input A tpd TO OUTPUT VCC Y 0.8V 1.2V ± 0.1V 1.5V ± 0.1V 1.8V ± 0.15V 2.5V ± 0.2V 3.3V ± 0.3V TO OUTPUT VCC Y 0.8V 1.2V ± 0.1V 1.5V ± 0.1V 1.8V ± 0.15V 2.5V ± 0.2V 3.3V ± 0.3V TO OUTPUT VCC Y 0.8V 1.2V ± 0.1V 1.5V ± 0.1V 1.8V ± 0.15V 2.5V ± 0.2V 3.3V ± 0.3V TO OUTPUT VCC Y 0.8V 1.2V ± 0.1V 1.5V ± 0.1V 1.8V ± 0.15V 2.5V ± 0.2V 3.3V ± 0.3V TA = +25°C Min — 2.6 2.1 1.8 1.5 1.4 Typ 14.9 4.7 3.4 2.9 2.3 2.1 TA = -40 to +85°C Max — 10.1 5.7 4.5 3.5 3.2 Min — 2.0 1.6 1.4 1.2 1.0 Max — 11.1 6.5 5.2 4.2 3.8 TA = -40 to +125°C Min — 2.0 1.6 1.4 1.2 1.0 Max — 12.2 7.2 5.8 4.6 4.2 Unit ns CL = 10pF see Figure 1 Parameter From Input A tpd TA = +25°C Min — 3.2 2.6 2.3 2.0 1.7 Typ 18.4 5.6 4.1 3.4 2.9 2.6 TA = -40 to +85°C Max — 11.8 6.7 5.3 4.2 3.8 Min — 2.3 1.9 1.7 1.5 1.4 Max — 12.8 7.7 6.2 5.0 4.6 TA = -40 to +125°C Min — 2.3 1.9 1.7 1.5 1.4 Max — 13.5 8.5 6.9 5.5 5.1 Unit ns CL = 15pF see Figure 1 Parameter From Input A tpd TA = +25°C TA = -40 to +85°C TA = -40 to +125°C Min Typ Max Min Max Min Max — 3.6 3.0 2.6 2.3 1.8 21.9 6.4 4.6 3.9 3.3 3.1 — 13.8 7.6 6.0 4.8 4.2 — 2.6 2.2 2.0 1.8 1.6 — 15.7 8.9 7.2 5.7 5.0 — 2.6 2.2 2.0 1.8 1.6 — 15.9 9.8 7.9 6.3 5.5 Unit ns CL = 30pF see Figure 1 Parameter From Input tpd A 74AUP2G34 Document number: DS35514 Rev. 6 - 2 TA = +25°C Min — 4.8 4.0 3.6 2.4 2.2 Typ 32.1 8.7 6.2 5.2 4.4 4.2 6 of 13 www.diodes.com TA = -40 to +85°C Max — 16.3 10.3 8.1 6.4 5.6 Min — 3.6 3.4 3.2 2.3 2.1 Max — 18.9 12.2 9.8 7.7 6.5 TA = -40 to +125°C Min — 3.6 3.4 3.2 2.3 2.1 Max — 20.8 13.4 10.8 8.5 7.2 Unit ns November 2014 © Diodes Incorporated 74AUP2G34 Parameter Measurement Information ADVANCED INFORMATION ADVANCEDINFORMATION From Output Under Test R L=1MΩ CL (see Note A) Inputs VCC VM CL ≤3ns VCC/2 5, 10, 15, 30pF ≤3ns VCC/2 5, 10, 15, 30pF VCC ≤3ns VCC/2 5, 10, 15, 30pF 1.8V±0.15V VCC ≤3ns VCC/2 5, 10, 15, 30pF 2.5V±0.2V VCC ≤3ns VCC/2 5, 10, 15, 30pF 3.3V±0.3V VCC ≤3ns VCC/2 5, 10, 15, 30pF VI tr/tf 0.8V VCC 1.2V±0.1V VCC 1.5V±0.1V tW Vl Vl Input VM Input VM VM 0V VM 0V tPLH tPHL VOH Voltage Waveform Pulse Duration Output VM VM VOL tPHL tPLH VOH Output VM VM VOL Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1 Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and tPHL are the same as tPD. 74AUP2G34 Document number: DS35514 Rev. 6 - 2 7 of 13 www.diodes.com November 2014 © Diodes Incorporated 74AUP2G34 Marking Information (1) SOT363 ADVANCED INFORMATION ADVANCEDINFORMATION 7 4 7 5 6 XX Y W X 1 Part Number 74AUP2G34DW-7 2 3 XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal Code Package SOT363 Identification Code ST Package X2-DFN1410-6 X2-DFN1010-6 X2-DFN0910-6 Identification Code RT ST MT (2) X2-DFN1410-6, X2-DFN1010-6, X2-DFN0910-6 Part Number 74AUP2G34FZ4-7 74AUP2G34FW4-7 74AUP2G34FW3-7 74AUP2G34 Document number: DS35514 Rev. 6 - 2 8 of 13 www.diodes.com November 2014 © Diodes Incorporated 74AUP2G34 SOT363 Package Outline Dimensions and Suggested Pad Layout ADVANCED INFORMATION ADVANCEDINFORMATION Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A SOT363 Dim Min Max Typ A 0.10 0.30 0.25 B 1.15 1.35 1.30 C 2.00 2.20 2.10 D 0.65 Typ F 0.40 0.45 0.425 H 1.80 2.20 2.15 J 0 0.10 0.05 K 0.90 1.00 1.00 L 0.25 0.40 0.30 M 0.10 0.22 0.11 0° 8° All Dimensions in mm B C H K M J D L F C2 C2 Dimensions Z Z G X Y C1 C2 C1 G Y Value (in mm) 2.5 1.3 0.42 0.6 1.9 0.65 X 74AUP2G34 Document number: DS35514 Rev. 6 - 2 9 of 13 www.diodes.com November 2014 © Diodes Incorporated 74AUP2G34 X2-DFN0910-6 Package Outline Dimensions and Suggested Pad Layout ADVANCED INFORMATION ADVANCEDINFORMATION Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A1 A Seating Plane D e Z1 Z E K K1 L1 L X2-DFN0910-6 Dim Min Max Typ A 0.35 0.30 A1 0 0.03 0.02 b 0.10 0.20 0.15 D 0.85 0.95 0.90 E 0.95 1.05 1.00 e 0.30 K 0.20 K1 0.25 L 0.25 0.35 0.30 L1 0.30 0.40 0.35 Z 0.075 Z1 0.075 All Dimensions in mm (Pin #1 ID) C0.5X45° b X1 Y1 G1 Y2 G Y Pin1 G2 74AUP2G34 Document number: DS35514 Rev. 6 - 2 X 10 of 13 www.diodes.com Dimensions Value (in mm) G G1 G2 X X1 Y Y1 Y2 0.100 0.050 0.150 0.150 0.750 0.525 0.475 1.150 November 2014 © Diodes Incorporated 74AUP2G34 X2-DFN1010-6 Package Outline Dimensions and Suggested Pad Layout ADVANCED INFORMATION ADVANCEDINFORMATION Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A A1 A3 X2-DFN1010-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.14 0.20 0.17 b1 0.05 0.15 0.10 D 0.95 1.05 1.00 E 0.95 1.05 1.00 e –– –– 0.35 L 0.35 0.45 0.40 K 0.15 –– –– Z –– –– 0.065 All Dimensions in mm D (Pin #1 ID) e b1 E K L(6x) b(6x) Z(4x) X1 C Y(5x) Y2 Y3 G G1 Y1 Pin1 74AUP2G34 Document number: DS35514 Rev. 6 - 2 X 11 of 13 www.diodes.com Dimensions Value (in mm) C G G1 X X1 Y Y1 Y2 Y3 0.350 0.150 0.150 0.200 0.900 0.500 0.525 0.475 1.150 November 2014 © Diodes Incorporated 74AUP2G34 X2-DFN1410-6 Package Outline Dimensions and Suggested Pad Layout ADVANCED INFORMATION ADVANCEDINFORMATION Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A1 A3 A Seating Plane D e (Pin #1 ID) L(6x) X2-DFN1410-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.15 0.25 0.20 D 1.35 1.45 1.40 E 0.95 1.05 1.00 e –– –– 0.50 L 0.25 0.35 0.30 Z –– –– 0.10 Z1 0.045 0.105 0.075 All Dimensions in mm E Z1(4x) Z(4x) b(6x) X1 C Y(6x) Dimensions C G X X1 Y Y1 Y1 1 74AUP2G34 Document number: DS35514 Rev. 6 - 2 G(4x) X(6x) 12 of 13 www.diodes.com Value (in mm) 0.500 0.250 0.250 1.250 0.525 1.250 November 2014 © Diodes Incorporated 74AUP2G34 IMPORTANT NOTICE ADVANCED INFORMATION ADVANCEDINFORMATION DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2014, Diodes Incorporated www.diodes.com 74AUP2G34 Document number: DS35514 Rev. 6 - 2 13 of 13 www.diodes.com November 2014 © Diodes Incorporated