74AUP1G57

74AUP1G57
CONFIGURABLE MULTIPLE-FUNCTION GATE
Description
Pin Assignments
The 74AUP1G57 is a single, 3-input positive configurable multiple
function gate with a standard push-pull output. The output state is
determined by eight patterns of 3-bit input. The user can chose the
logic functions AND, OR, NAND, NOR, XNOR, inverter or noninverting buffer. All inputs can be connected to ground or Vcc as
required.
(Top View)
(Top View)
B 1
6 C
5 Vcc
NEW PRODUCT
GND 2
B 1
6
C
GND 2
5
Vcc
A 3
4
Y
X2-DFN1410 -6
The device is designed for operation with a power supply range of
0.8V to 3.6V.
A 3
The inputs are tolerant to 3.6V allowing this device to be used in a
mixed voltage environment.
4 Y
B
GND
A
SOT26
(Top View)
The device is fully specified for partial power down applications using
IOFF. The IOFF circuitry disables the output preventing damaging
current backflow when the device is powered down. The user is
reminded that the device can simulate several types of logic gates but
may respond differently due to the Schmitt action at the inputs.
B1
6 C
GND 2
5 Vcc
A 3
(Top View)
4 Y
1
6
2
5
3
4
C
Vcc
Y
X2-DFN1010-6
(Top View)
6
B 1
C
2
5
Vcc
GND
Future
Product
3
4
Y
A
X2-DFN0910-6
SOT363
Features
Applications





Advanced Ultra Low-Power (AUP) CMOS
Supply Voltage Range from 0.8V to 3.6V
±4mA Output Drive at 3.0V
Low Static Power Consumption
IC < 0.9µA







Low Dynamic Power Consumption
CPD = 4.8pF Typical at 3.6V

Schmitt Trigger Action at all inputs makes the circuit tolerant for
slower input rise and fall time. The hysteresis is typically 950mV
at VCC = 3.0V.
IOFF Supports Partial-Power-Down Mode Operation







Notes:
Suited for Battery and Low-Power Needs
Voltage Level Shifting
General Purpose Logic
Power Down Signal Isolation
Wide array of products such as:
 PCs, Networking, Notebooks, Netbooks, PDAs
 Tablet Computers, E-readers
 Computer Peripherals, Hard Drives, CD/DVD ROMs
 TVs, DVDs, DVRs, Set-Top Boxes
 Cell Phones, Personal Navigation / GPS
 MP3 players ,Cameras, Video Recorders
ESD Protection per JESD 22

Exceeds 200-V Machine Model (A115)

Exceeds 2000-V Human Body Model (A114)

Exceeds 1000-V Charged Device Model (C101)
Latch-Up Exceeds 100mA per JESD 78, Class I
Standard SOT26 and SOT363 Packages
Leadless Packages per JESD30E

DFN1410 denoted as X2-DFN1410-6

DFN1010 denoted as X2-DFN1010-6

DFN0910 denoted as X2-DFN0910-6
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
Halogen and Antimony Free. “Green” Device (Note 3)
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free,
"Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
74AUP1G57
Document number: DS36852 Rev. 1 - 2
1 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
Ordering Information
74 AUP1G 57 XXX
Logic Device
Function
57 :
NEW PRODUCT
74 : Logic Prefix
AUP : 0.8 to 3.6 V
Logic Family
1G : One Gate
Package
3-Input
Configuable
MultipleFuntion Gate
Package
Package
(Notes 4 & 5)
Size
74AUP1G57W6-7
W6
SOT26
74AUP1G57DW-7
DW
SOT363
74AUP1G57FW3-7**
FW3
X2-DFN0910-6
74AUP1G57FW4-7
FW4
X2-DFN1010-6
74AUP1G57FZ4-7
FZ4
X2-DFN1410-6
Notes:
Packing
-7 : 7” Tape & Reel
W6 : SOT26
DW : SOT363
FW3 : DFN0910**
FW4 : DFN1010
FZ4 : DFN1410
Package
Code
Device
-7
7” Tape and Reel
3.0mm x 2.8mm x 1.2mm
0.95 mm lead pitch
2.0mm x 2.0mm x 1.1mm
0.65 mm lead pitch
0.9mm x 1.0mm x 0.35mm
0.3 mm lead pitch
1.0mm x 1.0mm x 0.4mm
0.35 mm lead pitch
1.4mm x 1.0mm x 0.4mm
0.5 mm lead pitch
Quantity
Part Number Suffix
3,000/Tape & Reel
-7
3,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
5,000/Tape & Reel
-7
4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf.
** The X2-DFN0910-6 is a future product.
Pin Descriptions
Pin Name
Function Table
Inputs
Function
Data Input
C
B
Ground
L
A
Data Input
L
Y
Data Output
B
GND
VCC
C
Output
A
Y
L
L
H
L
H
L
L
H
L
H
Supply Voltage
L
H
H
L
Data Input
H
L
L
L
H
L
H
L
H
H
L
H
H
H
H
H
Logic Diagram
A
3
4
B
C
74AUP1G57
Document number: DS36852 Rev. 1 - 2
1
Y
6
2 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
Logic Configurations
Vcc
Vcc
B
B
Y
B
C
5
2
5
4
3
4
2
C
C
Y
C
Y
B
B
Y
Y
C
C
NEW PRODUCT
B
6
6
3
Y
1
1
Configuration 2
2-Input NAND Gate with B Input Inverted
2-Input OR Gate with C input Inverted
Configuration 1
2-Input AND Gate
2-Input NOR Gate with Both Inputs Inverted
Vcc
Vcc
A
A
Y
1
C
A
6
2
5
3
4
Y
C
C
A
Y
1
6
2
5
3
4
C
Y
A
A
Y
Y
C
C
Configuration 4
2-Input NOR Gate
2-Input AND Gate with Both Inputs Inverted
Configuration 3
2-Input NAND Gate with C Input Inverted
2-Input OR Gate with A Input Inverted
Vcc
Vcc
AB
AB
Y
1
2
C
6
C
A
5
Y
A
3
4
5
3
4
Y
Configuration 6
Inverter
Function Selection Table
Logic Function
Configuration
2-Input AND
1
2-Input AND with both inputs inverted
4
2-Input NAND with inverted input
2, 3
2-Input OR with inverted input
2, 3
2-Input NOR
4
2-Input NOR with both inputs inverted
1
2-Input XNOR
5
1-Input INVERTER
6
Document number: DS36852 Rev. 1 - 2
6
2
Y
Configuration 5
2-Input XNOR Gate
74AUP1G57
1
3 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
Absolute Maximum Ratings (Notes 6 & 7)
Symbol
ESD HBM
ESD CDM
ESD MM
NEW PRODUCT
Rating
2
1
200
Unit
kV
kV
V
Supply Voltage Range
-0.5 to +4.6
V
VI
Input Voltage Range
-0.5 to +4.6
V
Vo
Voltage applied to output in high or low state
VCC
-0.5 to VCC +0.5
V
-50
mA
IIK
Input Clamp Current VI<0
IOK
Output Clamp Current (VO < 0 )
-50
mA
IO
Continuous Output Current (VO = 0 to VCC)
±20
mA
ICC
Continuous Current through VCC
50
mA
IGND
Continuous Current through GND
-50
mA
TJ
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
TSTG
Notes:
Description
Human Body Model ESD Protection
Charged Device Model ESD Protection
Machine Model ESD Protection
6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could
cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range.
Recommended Operating Conditions (Note 8)
Symbol
VCC
Parameter
Operating Voltage
VI
Input Voltage
VO
Output Voltage
IOH
IOL
High-Level Output Current
Low-Level Output Current
Min
Max
Unit
0.8
3.6
V
0
3.6
V
Active Mode
0
VCC
V
Power Down Mode
0
3.6
V
VCC = 0.8 V
-20
µA
VCC = 1.1 V
-
-1.1
VCC = 1.4 V
-
-1.7
VCC = 1.65 V
-
-1.9
VCC = 2.3 V
-
-3.1
VCC = 3.0 V
-
-4
VCC = 0.8 V
-
20
VCC = 1.1 V
-
1.1
VCC = 1.4 V
-
1.7
VCC = 1.65 V
-
1.9
VCC = 2.3 V
-
3.1
-
VCC = 3.0 V
TA
Note:
Operating Free-Air Temperature -
mA
uA
mA
-
4
-40
+125
°C
8. Unused inputs should be held at Vcc or Ground.
74AUP1G57
Document number: DS36852 Rev. 1 - 2
4 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
Electrical Characteristics
Symbol
NEW PRODUCT
VT+
VT-
ΔVT
VOH
Parameter
Test Conditions
Max
Min
Max
0.8V
1.1V
1.4V
0.3
0.53
0.74
0.65
0.9
1.11
0.3
0.53
0.74
0.7
0.9
1.11
1.65V
2.3V
3.0V
0.91
1.37
1.88
1.29
1.77
2.29
0.91
1.37
1.88
1.29
1.77
2.29
0.8V
1.1V
1.4V
0.1
0.26
0.39
0.6
0.65
0.75
0.1
0.26
0.39
0.6
0.65
0.75
1.65V
2.3V
3.0V
0.47
0.69
0.88
0.84
1.04
1.24
0.47
0.69
0.88
0.84
1.04
1.24
0.8V
1.1V
1.4V
0.07
0.08
0.18
0.5
0.46
0.56
0.07
0.08
0.18
0.5
0.46
0.56
IOH = -20μA
1.65V
2.3V
3.0V
0.8V to 3.6V
0.27
0.53
0.79
VCC – 0.1
0.27
0.53
0.79
VCC – 0.1
IOH = -1.1mA
1.1V
0.75 x VCC
0.66
0.92
1.31
-
0.7 x VCC
0.66
0.92
1.31
-
IOH = -1.7mA
1.4V
1.11
-
1.03
-
IOH = -1.9mA
1.65V
1.32
1.3
2.05
-
1.97
-
1.9
-
1.85
-
2.72
-
2.67
-
2.6
-
2.55
-
0.1
-
Negative-Going
Input Threshold
Voltage
Hysteresis
(VT+ - VT-)
IOH = -2.3mA
IOH = -3.1mA
IOH = -2.7mA
IOH = -4mA
VOL
Low-Level Input
Voltage
0.8V to 3.6V
1.1V
-
0.3 x VCC
-
0.3 x VCC
IOL = 1.7mA
1.4V
-
0.31
-
0.37
IOL = 1.9mA
1.65 V
-
0.31
-
0.35
0.31
-
0.44
-
0.45
-
0.31
-
0.33
-
0.44
-
0.45
IOL = 2.3mA
IOL = 4mA
IOFF
ΔIOFF
ICC
ΔICC
A or B Input
VI =GND to 3.6 V
Power Down
VI or VO =
Leakage Current 0V to 3.6V
Delta Power
VI or VO =
Down Leakage
0V to 3.6V
Current
Supply Current
3V
IOL = 1.1mA
IOL = 2.7mA
Input Current
2.3V
IOL = 20μA
IOL = 3.1mA
II
TA =-40 to +85°C
Min
Positive-Going
Input Threshold
Voltage
High-Level
Output Voltage
TA = +25°C
Vcc
VI = GND or VCC
IO=0
One input at VCC –
Additional Supply
0.6 V Other inputs
Current
at VCC or GND
74AUP1G57
Document number: DS36852 Rev. 1 - 2
2.3V
3V
0V to 3.6V
0
± 0.1
± 0.2
-
Unit
V
V
V
V
0.1
0.33
V
± 0.5
μA
± 0.6
μA
0V to 0.2 V
-
± 0.2
-
± 0.6
μA
0.8V to 3.6V
-
0.5
-
0.9
μA
3.3V
-
40
50
μA
-
5 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
Electrical Characteristics
NEW PRODUCT
Symbol
Parameter
VT+
Positive-Going
Input
Threshold
Voltage
VT-
NegativeGoing Input
Threshold
Voltage
ΔVT
VOH
Test Conditions
0.8V
1.1V
1.4V
0.3
0.53
0.74
0.7
0.92
1.13
1.65V
2.3V
3.0V
0.91
1.37
1.88
1.31
1.8
2.32
0.8V
1.1V
1.4V
0.1
0.26
0.39
0.6
0.65
0.75
1.65V
2.3V
3.0V
0.47
0.69
0.88
0.84
1.04
1.24
0.8V
1.1V
1.4V
0.07
0.08
0.18
0.5
0.46
0.56
IOH = -20μA
1.65V
2.3V
3.0V
0.8V to 3.6V
0.27
0.53
0.79
VCC – 0.11
IOH = -1.1mA
1.1V
0.6 x VCC
0.66
0.92
1.31
-
IOH = -1.7mA
1.4V
0.93
-
IOH = -1.9mA
1.65V
1.17
1.77
-
1.67
-
2.40
-
-
IOH = -2.3mA
IOH = -2.7mA
IOH = -4mA
Low-Level
Input Voltage
2.3V
3V
0.11
0.33 x VCC
IOL = 20μA
IOL = 1.1mA
1.1V
-
IOL = 1.7mA
1.4V
-
0.41
IOL = 1.9mA
1.65 V
-
0.39
-
0.50
-
0.36
-
0.50
IOL = 2.3mA
IOL = 2.7mA
IOL = 4mA
2.3V
3V
II
Input Current
A or B Input
VI =GND to 3.6 V
IOFF
Power Down
Leakage
Current
VI or VO =
0V to 3.6V
0
ΔIOFF
Delta Power
Down
Leakage
Current
VI or VO =
0V to 3.6V
0V to 0.2 V
Supply
Current
VI = GND or VCC
IO=0
Additional
Supply
Current
One input at VCC –
0.6 V Other inputs
at VCC or GND
ΔICC
2.30
0.8V to 3.6V
IOL = 3.1mA
ICC
TA =-40 to +125°C
Max
IOH = -3.1mA
VOL
Vcc
Min
Hysteresis
(VT+ - VT-)
High-Level
Output
Voltage
(continued)
-
0.36
Unit
V
V
V
V
V
± 0.75
μA
± 1.0
μA
-
± 2.5
μA
0.8V to 3.6V
-
1.4
μA
3.3V
-
75
μA
0V to 3.6V
-
74AUP1G57
Document number: DS36852 Rev. 1 - 2
6 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
Package Characteristics
Symbol
Parameter
Package
Test Conditions
Min
Typ.
Max
-
166
-
-
371
-
450
-
-
445
-
X2-DFN1410-6
-
430
-
SOT26
-
46
SOT363
-
143
-
-
255
-
-
250
-
-
190
-
SOT26
SOT363
Thermal Resistance JunctionX2-DFN0910-6
to-Ambient
X2-DFN1010-6
NEW PRODUCT
θJA
(Note 9)
Thermal Resistance JunctionX2-DFN0910-6
to-Case
X2-DFN1010-6
θJC
(Note 9)
X2-DFN1410-6
Note:
Unit
°C/W
°C/W
9. Test condition for each of the 8 package types: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout.
Operating Characteristics (@TA = +25°C, unless otherwise specified.)
Parameter
Test
Conditions
Vcc
TYP
Unit
4
4
4
4
4.4
4.8
pF
Cpd
Power
Dissipation
Capacitance
f = 1MHz
No Load
0.8 V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3 ± 0.3V
CI
Input
Capacitance
Vi = VCC or GND
0 V or 3.3V
1.1
pF
CO
Output
Capacitance
V0= VCC or GND
0V
2.0
pF
Switching Characteristics
CL=5pF, See Figure 1
Parameter
From
Input
TO
OUTPUT
A,
B,
tpd
Y
or
TA = +25°C
Document number: DS36852 Rev. 1 - 2
Unit
Min
TYP
Max
Min
Max
Min
Max
0.8 V
-
28
-
-
-
-
-
1.2 V ± 0.1 V
2.6
7.4
14.4
2.1
14.8
2.1
15.1
1.5 V ± 0.1 V
1.9
4.6
7.6
1.4
8.2
1.4
8.6
1.8 V ± 0.15 V
1.4
3.9
6.2
0.9
6.8
0.9
7.2
2.5 V ± 0.2 V
1.1
3.1
4.5
0.6
5.1
0.6
5.3
3.3 V ± 0.3 V
1
2.8
3.9
0.5
4.1
0.5
4.3
C
74AUP1G57
TA = -40°C to +85ºC TA = -40ºC to +125°C
VCC
7 of 16
www.diodes.com
ns
June 2015
© Diodes Incorporated
74AUP1G57
Switching Characteristics (continued)
CL=10pF, See Figure 1
From
Input
Parameter
TO
OUTPUT
A,
NEW PRODUCT
B,
Y
tpd
or
C
TA = +25°C
TA = -40°C to +85°C TA = -40°C to +125ºC
Unit
VCC
Min
TYP
Max
Min
Max
Min
Max
0.8 V
-
32
-
-
-
-
-
1.2 V ± 0.1 V
2.6
8.3
16.4
2.1
17
2.1
17.3
1.5 V ± 0.1 V
1.9
5.2
8.7
1.4
9.4
1.4
9.8
1.8 V ± 0.15 V
1.4
4.5
7
0.9
7.8
0.9
8.2
2.5 V ± 0.2 V
1.1
3.7
5.2
0.6
5.9
0.6
6.2
3.3 V ± 0.3 V
1
3.4
4.6
0.5
4.9
0.5
5.1
ns
CL=15pF, See Figure 1
From
Input
Parameter
TO
OUTPUT
A,
B,
Y
tpd
or
C
TA = +25°C
TA = -40°C to +85°C TA = -40°C to +125°C
Unit
VCC
Min
TYP
Max
Min
Max
Min
Max
0.8 V
-
38
-
-
-
-
-
1.2 V ± 0.1 V
3.4
9.1
17.9
3.1
19.8
3.1
20
1.5 V ± 0.1 V
2.8
5.7
9.6
2.3
10.4
2.3
10.9
1.8 V ± 0.15 V
2.1
4.9
7.8
1.6
8.7
1.6
9.2
2.5 V ± 0.2 V
1.7
4.1
5.8
1.2
6.5
1.2
6.9
3.3 V ± 0.3 V
1.5
3.8
5.1
1
5.5
1
5.7
ns
CL=30pF, See Figure 1
Parameter
From
Input
TO
OUTPUT
A,
B,
tpd
Y
or
C
74AUP1G57
Document number: DS36852 Rev. 1 - 2
TA = +25°C
TA = -40°C to +85°C TA = -40°C to +125°C
Unit
VCC
Min
TYP
Max
Min
Max
Min
Max
0.8 V
-
46
-
-
-
-
-
1.2 V ± 0.1 V
4.6
11.9
23.8
3.9
24.9
3.9
25.4
1.5 V ± 0.1 V
3.6
7.4
12.2
3.4
13.3
3.4
14.1
1.8 V ± 0.15 V
3.1
6.2
9.9
2.6
11.1
2.6
11.8
2.5 V ± 0.2 V
2.6
5.2
7.4
2.1
8.3
2.1
8.8
3.3 V ± 0.3 V
2.3
4.9
6.6
1.8
7
1
7.4
ns
8 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
Parameter Measurement Information
From Output
Under Test
R L=1MΩ
CL
NEW PRODUCT
(see Note A)
Inputs
VCC
VI
VCC
VCC
VCC
VCC
VCC
VCC
0.8 V
1.2V±0.1V
1.5V±0.1V
1.8V±0.15V
2.5V±0.2V
3.3V±0.3V
tr/tf
≤3ns
≤3ns
≤3ns
≤3ns
≤3ns
≤3ns
VM
CL
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
VCC/2
5, 10, 15, 30 pF
5, 10, 15, 30 pF
5, 10, 15, 30 pF
5, 10, 15, 30 pF
5, 10, 15, 30 pF
5, 10, 15, 30 pF
tW
Vl
Vl
Input
VM
Input
VM
VM
0V
VM
0V
Voltage Waveform Pulse Duration
tPLH
tPHL
VOH
Output
VM
VM
VOL
tPHL
tPLH
VOH
Output
VM
VM
VOL
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1. Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD.
74AUP1G57
Document number: DS36852 Rev. 1 - 2
9 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
Marking Information
SOT26, SOT363
5
7
6
4
7
(1)
NEW PRODUCT
XX Y W X
1
Part Number
2
3
XX : Identification code
Y : Year 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : A~Z : Internal Code
Package
Identification Code
74AUP1G57W6
SOT26
AP
74AUP1G57DW
SOT363
BV
(2) X2-DFN0910-6, X2-DFN1010-6, X2-DFN1410-6
Part Number
Package
Identification Code
74AUP1G57FW3
X2-DFN0910-6
AP
74AUP1G57FW4
X2-DFN1010-6
BV
74AUP1G57FZ4
X2-DFN1410-6
NG
74AUP1G57
Document number: DS36852 Rev. 1 - 2
10 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
SOT26
Package Outline Dimensions and Suggested Pad Layout
NEW PRODUCT
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
SOT26
Dim Min Max
Typ
A1 0.013 0.10
0.05
A2 1.00 1.30
1.10
A3 0.70 0.80
0.75
b
0.35 0.50
0.38
c
0.10 0.20
0.15
D
2.90 3.10
3.00
e
0.95
e1
1.90
E
2.70 3.00
2.80
E1 1.50 1.70
1.60
L
0.35 0.55
0.40
a
8°
a1
7°
All Dimensions in mm
D
E1
E
b
a1
e1
A2
A3
A1
Seating Plane
e
L
c
a
C1
Y1
G
Dimensions Value (in mm)
C
2.40
C1
0.95
G
1.60
X
0.55
Y
0.80
Y1
3.20
C
Y
X
74AUP1G57
Document number: DS36852 Rev. 1 - 2
11 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
SOT363
Package Outline Dimensions and Suggested Pad Layout
NEW PRODUCT
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
SOT363
Dim Min Max Typ
A 0.10 0.30 0.25
B 1.15 1.35 1.30
C 2.00 2.20 2.10
D
0.65 Typ
F 0.40 0.45 0.425
H 1.80 2.20 2.15
J
0
0.10 0.05
K 0.90 1.00 1.00
L 0.25 0.40 0.30
M 0.10 0.22 0.11
0°
8°

All Dimensions in mm
A
B C
H
K
M
J
D
F
C2
Z
L
C2
C1
G
Dimensions
Value (in mm)
Z
G
X
Y
C1
C2
2.5
1.3
0.42
0.6
1.9
0.65
Y
X
74AUP1G57
Document number: DS36852 Rev. 1 - 2
12 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
X2-DFN0910-6 Package Outline Dimensions and Suggested Pad Layout
NEW PRODUCT
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
Seating Plane
D
e
Z1
Z
E
K
K1
L1
L
(Pin #1 ID)
C0.5X45°
b
X2-DFN0910-6
Dim
Min
Max Typ
A
0.35 0.30
A1
0
0.03 0.02
b
0.10
0.20 0.15
D
0.85
0.95 0.90
E
0.95
1.05 1.00
e
0.30
K
0.20
K1
0.25
L
0.25
0.35 0.30
L1
0.30
0.40 0.35
Z
0.075
Z1
0.075
All Dimensions in mm
X1
Dimensions Value (in mm)
G
G1
G2
X
X1
Y
Y1
Y2
Y1
G1
Y2
G
Y
0.100
0.050
0.150
0.150
0.750
0.525
0.475
1.150
Pin1
G2
74AUP1G57
Document number: DS36852 Rev. 1 - 2
X
13 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
X2-DFN1010-6
Package Outline Dimensions and Suggested Pad Layout
NEW PRODUCT
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A
X2-DFN1010-6
Dim
Min
Max Typ
A
––
0.40 0.39
A1
0.00 0.05 0.02
A3
––
––
0.13
b
0.14 0.20 0.17
b1
0.05 0.15 0.10
D
0.95 1.05 1.00
E
0.95 1.05 1.00
e
––
––
0.35
L
0.35 0.45 0.40
K
0.15
––
––
Z
––
––
0.065
All Dimensions in mm
A3
D
(Pin #1 ID)
e
b1
E
K
L(6x)
b(6x)
Z(4x)
X1
C
Y (6x)
Y1
Dimensions
Value (in mm)
C
G
X
X1
Y
Y1
0.350
0.150
0.200
0.900
0.550
1.250
1
G(4x)
74AUP1G57
Document number: DS36852 Rev. 1 - 2
X(6x)
14 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
X2-DFN1410-6
Package Outline Dimensions and Suggested Pad Layout
NEW PRODUCT
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version.
A1
A3
A
Seating Plane
D
e
(Pin #1 ID)
L(6x)
E
X2-DFN1410-6
Dim Min
Max Typ
A
––
0.40 0.39
A1
0.00 0.05 0.02
A3
––
––
0.13
b
0.15 0.25 0.20
D
1.35 1.45 1.40
E
0.95 1.05 1.00
e
––
––
0.50
L
0.25 0.35 0.30
Z
––
––
0.10
Z1 0.045 0.105 0.075
All Dimensions in mm
Z1(4x)
Z(4x)
b(6x)
X1
C
Y(6x)
Y1
1
74AUP1G57
Document number: DS36852 Rev. 1 - 2
G(4x)
Dimensions
Value
(in mm)
C
0.500
G
0.250
X
0.250
X1
1.250
Y
0.525
Y1
1.250
X(6x)
15 of 16
www.diodes.com
June 2015
© Diodes Incorporated
74AUP1G57
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
NEW PRODUCT
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes
Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales
channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify
and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and
markings noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is
the final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the
express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause
the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems,
and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and
its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or
systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
74AUP1G57
Document number: DS36852 Rev. 1 - 2
16 of 16
www.diodes.com
June 2015
© Diodes Incorporated