74AUP1G97 CONFIGURABLE MULTIPLE-FUNCTION GATE Description Pin Assignments (Top View) The 74AUP1G97 is a single, 3-input positive configurable multiple function gate with a standard push-pull output. The output state is determined by eight patterns of 3-bit input. The user can chose the logic functions MUX, AND, OR, NAND, NOR, inverter or non-inverting buffer. All inputs can be connected to ground or Vcc as required. (Top View) B 1 6 C 5 Vcc GND 2 B 1 6 C GND 2 5 Vcc A 3 4 Y X2-DFN1410 -6 NEW PRODUCT The device is designed for operation with a power supply range of 0.8V to 3.6V. A 3 4 Y SOT26 The inputs are tolerant to 3.6V allowing this device to be used in a mixed voltage environment. (Top View) The device is fully specified for partial power down applications using IOFF. The IOFF circuitry disables the output preventing damaging current backflow when the device is powered down. The user is reminded that the device can simulate several types of logic gates but may respond differently due to the Schmitt action at the inputs. B1 6 C GND 2 5 Vcc A 3 (Top View) B GND A 4 Y 1 6 2 5 3 4 C Vcc Y X2-DFN1010-6 (Top View) 6 B 1 C 5 Vcc GND Future2 Product 4 Y A 3 X2-DFN0910-6 SOT363 Features Applications Advanced Ultra Low-Power (AUP) CMOS Supply Voltage Range from 0.8V to 3.6V ±4mA Output Drive at 3.0V Low Static Power Consumption IC < 0.9µA Low Dynamic Power Consumption CPD = 4.8pF Typical at 3.6V Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for Slower Input Rise and Fall Time. The hysteresis is typically 950mV at VCC = 3.0V. IOFF Supports Partial-Power-Down Mode Operation Notes: Suited for Battery and Low Power Needs Voltage Level Shifting General Purpose Logic Power Down Signal Isolation Wide array of products such as: PCs, Networking, Notebooks, Netbooks, PDAs Tablet Computers, E-readers Computer Peripherals, Hard Drives, CD/DVD ROMs TVs, DVDs, DVRs, Set-Top Boxes Cell Phones, Personal Navigation / GPS MP3 Players ,Cameras, Video Recorders ESD Protection per JESD 22 Exceeds 200-V Machine Model (A115) Exceeds 2000-V Human Body Model (A114) Exceeds 1000-V Charged Device Model (C101) Latch-Up Exceeds 100mA per JESD 78, Class I Standard SOT26 and SOT363 packages Leadless packages per JESD30E DFN1410 denoted as X2-DFN1410-6 DFN1010 denoted as X2-DFN1010-6 DFN0910 denoted as X2-DFN0910-6 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. “Green” Device (Note 3) 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free "Green" and Lead-free. 3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. 74AUP1G97 Document number: DS36854 Rev. 1 - 2 1 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 Ordering Information 74 AUP1G Logic Device XXX Function 97 : 74 : Logic Prefix AUP : 0.8 to 3.6 V Logic Family 1G : One Gate NEW PRODUCT 97 Package 3-Input Configuable MultipleFuntion Gate Package Package (Notes 4 & 5) Size 74AUP1G97W6-7 W6 SOT26 74AUP1G97DW-7 DW SOT363 74AUP1G97FW3-7** FW3 X2-DFN0910-6 74AUP1G97FW4-7 FW4 X2-DFN1010-6 74AUP1G97FZ4-7 FZ4 X2-DFN1410-6 Notes: Packing -7 : 7” Tape & Reel W6 : SOT26 DW : SOT363 FW3 : DFN0910** FW4 : DFN1010 FZ4 : DFN1410 Package Code Device -7 7” Tape and Reel 3.0mm x 2.8mm x 1.2mm 0.95 mm lead pitch 2.0mm x 2.0mm x 1.1mm 0.65 mm lead pitch 0.9mm x 1.0mm x 0.35mm 0.3 mm lead pitch 1.0mm x 1.0mm x 0.4mm 0.35 mm lead pitch 1.4mm x 1.0mm x 0.4mm 0.5 mm lead pitch Quantity Part Number Suffix 3,000/Tape & Reel -7 3,000/Tape & Reel -7 5,000/Tape & Reel -7 5,000/Tape & Reel -7 5,000/Tape & Reel -7 4. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at http://www.diodes.com/datasheets/ap02001.pdf. 5. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf. ** The X2-DFN0910-6 is a future product. Pin Descriptions Pin Name Function Table Inputs Function Output Data Input C B A Y Ground L L L L A Data Input L L H L Y Data Output L H L H Supply Voltage L H H H Data Input H L L L H L H H H H L L H H H H B GND VCC C 74AUP1G97 Document number: DS36854 Rev. 1 - 2 2 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 Logic Diagram A 3 4 B NEW PRODUCT C 74AUP1G97 Document number: DS36854 Rev. 1 - 2 1 Y 6 3 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 Logic Configurations Vcc Vcc C A B B Y A A 1 6 2 5 3 4 Y C C A Y 1 6 2 5 3 4 C Y A Y NEW PRODUCT C Configuration 2 2-Input AND Gate 2-Input NOR Gate with Both Inputs Inverted Configuration 1 2 to 1 Data Selector When C is = L, Y=B; When C is H, Y=A Vcc Vcc C C Y Y A A C 1 6 2 5 3 C 4 B Y B 1 6 2 5 3 4 C Y C Y Y B A Configuration 4 2-Input NOR Gate with One Input Inverted 2-Input AND Gate with One Input Inverted Configuration 3 2-Input NAND Gate with B Input Inverted 2-Input OR Gate with A Input Inverted Vcc Vcc B C Y B 1 6 2 5 3 4 C C Y Y 1 6 2 5 3 4 C Y Configuration 6 Inverter Configuration 5 2-Input OR Gate Function Selection Table Logic Function Configuration 2-to-1 Data Selector 1 2-Input AND gate 2 2-Input AND with inverted input 3,4 2-Input NOR with inverted input 3,4 2-Input OR 5 2-Input NOR with both inputs inverted 2 1-Input Inverter 6 74AUP1G97 Document number: DS36854 Rev. 1 - 2 4 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 Absolute Maximum Ratings (Notes 6 & 7) Symbol ESD HBM ESD CDM ESD MM NEW PRODUCT Rating 2 1 200 Unit kV kV V Supply Voltage Range -0.5 to +4.6 V VI Input Voltage Range -0.5 to +4.6 V Vo Voltage applied to output in high or low state -0.5 to VCC +0.5 V VCC IIK Input Clamp Current VI<0 -50 mA IOK Output Clamp Current (VO < 0 ) -50 mA IO Continuous Output Current (VO = 0 to VCC) ±20 mA ICC Continuous Current through VCC 50 mA IGND Continuous Current through GND -50 mA TJ Operating Junction Temperature -40 to +150 °C Storage Temperature -65 to +150 °C TSTG Notes: Description Human Body Model ESD Protection Charged Device Model ESD Protection Machine Model ESD Protection 6. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device operation should be within recommend values. 7. Forcing the maximum allowed voltage could cause a condition exceeding the maximum current or conversely forcing the maximum current could cause a condition exceeding the maximum voltage. The ratings of both current and voltage must be maintained within the controlled range. Recommended Operating Conditions (Note 8) Symbol VCC VI VO IOH IOL Parameter Operating Voltage - Input Voltage Output Voltage High-Level Output Current Low-Level Output Current Note: Max Unit 0.8 3.6 V 0 3.6 V Active Mode 0 VCC V Power Down Mode 0 3.6 V VCC = 0.8 V -20 µA VCC = 1.1 V - -1.1 VCC = 1.4 V - -1.7 VCC = 1.65 V - -1.9 VCC = 2.3 V - -3.1 VCC = 3.0 V - -4 VCC = 0.8 V - 20 VCC = 1.1 V - 1.1 VCC = 1.4 V - 1.7 VCC = 1.65 V - 1.9 VCC = 2.3 V - 3.1 VCC = 3.0 V TA Min Operating Free-Air Temperature - mA µA mA - 4 -40 +125 °C 8. Unused inputs should be held at Vcc or Ground. 74AUP1G97 Document number: DS36854 Rev. 1 - 2 5 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 Electrical Characteristics Symbol NEW PRODUCT VT+ VT- ΔVT VOH Parameter Test Conditions Max Min Max 0.8V 1.1V 1.4V 0.3 0.53 0.74 0.65 0.9 1.11 0.3 0.53 0.74 0.7 0.9 1.11 1.65V 2.3V 3.0V 0.91 1.37 1.88 1.29 1.77 2.29 0.91 1.37 1.88 1.29 1.77 2.29 0.8V 1.1V 1.4V 0.1 0.26 0.39 0.6 0.65 0.75 0.1 0.26 0.39 0.6 0.65 0.75 1.65V 2.3V 3.0V 0.47 0.69 0.88 0.84 1.04 1.24 0.47 0.69 0.88 0.84 1.04 1.24 0.8V 1.1V 1.4V 0.07 0.08 0.18 0.5 0.46 0.56 0.07 0.08 0.18 0.5 0.46 0.56 IOH = -20μA 1.65V 2.3V 3.0V 0.8V to 3.6V 0.27 0.53 0.79 VCC – 0.1 0.27 0.53 0.79 VCC – 0.1 IOH = -1.1mA 1.1V 0.75 x VCC 0.66 0.92 1.31 - 0.7 x VCC 0.66 0.92 1.31 - IOH = -1.7mA 1.4V 1.11 - 1.03 - IOH = -1.9mA 1.65V 1.32 - 1.3 2.05 1.97 - - Negative-Going Input Threshold Voltage Hysteresis (VT+ - VT-) IOH = -2.3mA IOH = -3.1mA IOH = -2.7mA IOH = -4mA VOL Low-level Input Voltage ΔIOFF ICC ΔICC 1.85 - - 2.67 - 2.6 - 2.55 - 0.1 0.1 0.3 x VCC IOL = 1.1mA - 0.3 x VCC - IOL = 1.7mA 1.4V - 0.31 - 0.37 IOL = 1.9mA 1.65 V - 0.31 0.35 0.31 - - 0.44 - 0.45 - 0.31 - 0.33 - 0.44 - 0.45 IOL = 2.3mA A or B Input VI =GND to 3.6 V Power Down VI or VO = Leakage Current 0V to 3.6V Delta Power VI or VO = Down Leakage 0V to 3.6V Current Supply Current - 1.1V IOL = 4mA IOFF 3V 1.9 2.72 0.8V to 3.6V IOL = 2.7mA Input Current 2.3V IOL = 20μA IOL = 3.1mA II TA = -40 to +85°C Min Positive-Going Input Threshold Voltage High-Level Output Voltage TA = +25°C Vcc VI = GND or VCC IO=0 One input at VCC – Additional Supply 0.6 V Other inputs Current at VCC or GND 74AUP1G97 Document number: DS36854 Rev. 1 - 2 2.3V 3V 0V to 3.6V 0 ± 0.1 ± 0.2 - 0.33 Unit V V V V V ± 0.5 μA ± 0.6 μA 0V to 0.2 V - ± 0.2 - ± 0.6 μA 0.8V to 3.6V - 0.5 - 0.9 μA 3.3V - 40 50 μA - 6 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 Electrical Characteristics NEW PRODUCT Symbol Parameter VT+ Positive-Going Input Threshold Voltage VT- NegativeGoing Input Threshold Voltage ΔVT VOH Test Conditions 0.8V 1.1V 1.4V 0.3 0.53 0.74 0.7 0.92 1.13 1.65V 2.3V 3.0V 0.91 1.37 1.88 1.31 1.8 2.32 0.8V 1.1V 1.4V 0.1 0.26 0.39 0.6 0.65 0.75 1.65V 2.3V 3.0V 0.47 0.69 0.88 0.84 1.04 1.24 0.8V 1.1V 1.4V 0.07 0.08 0.18 0.5 0.46 0.56 IOH = -20μA 1.65V 2.3V 3.0V 0.8V to 3.6V 0.27 0.53 0.79 VCC – 0.11 IOH = -1.1mA 1.1V 0.6 x VCC 0.66 0.92 1.31 - IOH = -1.7mA 1.4V 0.93 - IOH = -1.9mA 1.65V 1.17 1.77 - 1.67 - 2.40 - - IOH = -2.3mA IOH = -2.7mA IOH = -4mA Low-Level Input Voltage 2.3V 3V 0.11 0.33 x VCC IOL = 20μA IOL = 1.1mA 1.1V - IOL = 1.7mA 1.4V - 0.41 IOL = 1.9mA 1.65 V - 0.39 - 0.50 - 0.36 - 0.50 IOL = 2.3mA IOL = 2.7mA IOL = 4mA 2.3V 3V II Input Current A or B Input VI =GND to 3.6 V IOFF Power Down Leakage Current VI or VO = 0V to 3.6V 0 ΔIOFF Delta Power Down Leakage Current VI or VO = 0V to 3.6V 0V to 0.2 V Supply Current VI = GND or VCC IO=0 Additional Supply Current One input at VCC – 0.6 V Other inputs at VCC or GND ΔICC 2.30 0.8V to 3.6V IOL = 3.1mA ICC TA = -40 to +125°C Max IOH = -3.1mA VOL Vcc Min Hysteresis (VT+ - VT-) High-Level Output Voltage (continued) - 0.36 Unit V V V V V ± 0.75 μA ± 1.0 μA - ± 2.5 μA 0.8V to 3.6V - 1.4 μA 3.3V - 75 μA 0V to 3.6V - 74AUP1G97 Document number: DS36854 Rev. 1 - 2 7 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 Package Characteristics Symbol Parameter Package Test Conditions SOT26 SOT363 Thermal Resistance JunctionX2-DFN0910-6 to-Ambient X2-DFN1010-6 NEW PRODUCT θJA (Note 9) Max 166 - - 371 - 450 - - X2-DFN1410-6 - 430 - SOT26 - 46 - SOT363 - 143 - 255 - - 250 - - 190 - (Note 9) X2-DFN1410-6 Note: Typ. - 445 Thermal Resistance JunctionX2-DFN0910-6 to-Case X2-DFN1010-6 θJC Min Unit °C/W °C/W 9. Test condition for each of the 8 package types: Device mounted on FR-4 substrate PC board, 2oz copper, with minimum recommended pad layout. Operating Characteristics (@TA = +25°C, unless otherwise noted.) Test Conditions Vcc TYP Unit Cpd Power Dissipation Capacitance f = 1MHz No Load 0.8 V 1.2V ± 0.1V 1.5V ± 0.1V 1.8V ± 0.15V 2.5V ± 0.2V 3.3 ± 0.3V 4 4 4 4 4.4 4.8 pF CI Input Capacitance Vi = VCC or GND 0 V or 3.3V 1.1 pF CO Output Capacitance V0= VCC or GND 0V 2.0 pF Parameter Switching Characteristics CL=5pF, See Figure 1 Parameter From Input TO OUTPUT A, B, tpd Y or TA = 25ºC Document number: DS36854 Rev. 1 - 2 Unit Min TYP Max Min Max Min Max 0.8 V - 28 - - - - - 1.2 V ± 0.1 V 2.8 7.5 14.4 2.5 14.8 2.5 15.1 1.5 V ± 0.1 V 2.1 4.7 7.6 1.6 8.2 1.6 8.6 1.8 V ± 0.15 V 1.6 3.9 6.2 1.1 6.8 1.1 7.2 2.5 V ± 0.2 V 1.1 3.2 4.5 0.6 5.1 0.6 5.3 3.3 V ± 0.3 V 1 2.9 3.9 0.5 4.1 0.5 4.3 C 74AUP1G97 TA = -40ºC to +85ºC TA = -40ºC to +125ºC VCC 8 of 17 www.diodes.com ns June 2015 © Diodes Incorporated 74AUP1G97 Switching Characteristics (continued) CL=10pF, See Figure 1 From Input Parameter TO OUTPUT A, NEW PRODUCT B, Y tpd or C TA = +25ºC TA = -40ºC to +85ºC TA = -40ºC to +125ºC Unit VCC Min TYP Max Min Max Min Max 0.8 V - 32 - - - - - 1.2 V ± 0.1 V 3.2 8.4 16.3 2.9 17 2.9 17.3 1.5 V ± 0.1 V 2.6 5.3 8.7 2.8 9.4 2.8 9.8 1.8 V ± 0.15 V 2.5 4.5 7 2.3 7.8 2.3 8.2 2.5 V ± 0.2 V 2.4 3.7 5.2 2.1 5.9 2.1 6.1 3.3 V ± 0.3 V 2.3 3.4 4.6 1.9 4.9 1.9 5.1 ns CL=15pF, See Figure 1 From Input Parameter TO OUTPUT A, B, Y tpd or C TA = +25°C TA = -40°C to +85°C TA = -40°C to +125°C Unit VCC Min TYP Max Min Max Min Max 0.8 V - 35 - - - - - 1.2 V ± 0.1 V 3.6 9.4 18.2 3.2 19.8 3.2 20 1.5 V ± 0.1 V 2.9 5.9 9.6 2.5 10.4 2.5 10.9 1.8 V ± 0.15 V 2.3 5 7.8 1.8 8.7 1.8 9.1 2.5 V ± 0.2 V 1.7 4.2 5.8 1.2 6.5 1.2 6.9 3.3 V ± 0.3 V 1.4 3.8 5.1 0.9 5.5 0.9 5.7 ns CL=30pF, See Figure 1 Parameter From Input TO OUTPUT A, B, tpd Y or C 74AUP1G97 Document number: DS36854 Rev. 1 - 2 TA = +25°C TA = -40ºC to +85ºC TA = -40ºC to +125°C Unit VCC Min TYP Max Min Max Min Max 0.8 V - 45 - - - - - 1.2 V ± 0.1 V 4.6 12 23.8 4 24.9 4 25.3 1.5 V ± 0.1 V 3.7 7.4 12.2 3.6 13.3 3.6 14 1.8 V ± 0.15 V 3.3 6.3 9.9 2.8 11.1 2.8 11.8 2.5 V ± 0.2 V 2.5 5.3 7.4 2 8.3 2 8.8 3.3 V ± 0.3 V 2.1 4.9 6.6 1.6 7 1.6 7.4 ns 9 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 Parameter Measurement Information From Output Under Test R L=1MΩ CL NEW PRODUCT (see Note A) Inputs VCC VI VCC VCC VCC VCC VCC VCC 0.8 V 1.2V±0.1V 1.5V±0.1V 1.8V±0.15V 2.5V±0.2V 3.3V±0.3V tr/tf ≤3ns ≤3ns ≤3ns ≤3ns ≤3ns ≤3ns VM CL VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 VCC/2 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF 5, 10, 15, 30 pF tW Vl Vl Input VM Input VM VM 0V VM 0V Voltage Waveform Pulse Duration tPLH tPHL VOH Output VM VM VOL tPHL tPLH VOH Output VM VM VOL Voltage Waveform Propagation Delay Times Inverting and Non Inverting Outputs Figure 1. Load Circuit and Voltage Waveforms Notes: A. Includes test lead and test apparatus capacitance. B. All pulses are supplied at pulse repetition rate ≤ 10 MHz. C. Inputs are measured separately one transition per measurement. D. tPLH and tPHL are the same as tPD. 74AUP1G97 Document number: DS36854 Rev. 1 - 2 10 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 Marking Information (1) SOT26, SOT363 7 4 7 5 6 NEW PRODUCT XX Y W X 1 2 3 XX : Identification code Y : Year 0~9 W : Week : A~Z : 1~26 week; a~z : 27~52 week; z represents 52 and 53 week X : A~Z : Internal Code Part Number Package 74AUP1G97W6 SOT26 Identification Code AY 74AUP1G97DW SOT363 BX Part Number Package Identification Code 74AUP1G97FW3 X2-DFN0910-6 AY 74AUP1G97FW4 X2-DFN1010-6 BX 74AUP1G97FZ4 X2-DFN1410-6 NT (2) X2-DFN0910-6, X2-DFN1010-6, X2-DFN1410-6 74AUP1G97 Document number: DS36854 Rev. 1 - 2 11 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 SOT26 Package Outline Dimensions and Suggested Pad Layout NEW PRODUCT Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. SOT26 Dim Min Max Typ A1 0.013 0.10 0.05 A2 1.00 1.30 1.10 A3 0.70 0.80 0.75 b 0.35 0.50 0.38 c 0.10 0.20 0.15 D 2.90 3.10 3.00 e 0.95 e1 1.90 E 2.70 3.00 2.80 E1 1.50 1.70 1.60 L 0.35 0.55 0.40 a 8° a1 7° All Dimensions in mm D E1 E b a1 e1 A2 A3 A1 Seating Plane e L c a C1 Y1 G Dimensions Value (in mm) C 2.40 C1 0.95 G 1.60 X 0.55 Y 0.80 Y1 3.20 C Y X 74AUP1G97 Document number: DS36854 Rev. 1 - 2 12 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 SOT363 Package Outline Dimensions and Suggested Pad Layout NEW PRODUCT Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. SOT363 Dim Min Max Typ A 0.10 0.30 0.25 B 1.15 1.35 1.30 C 2.00 2.20 2.10 D 0.65 Typ F 0.40 0.45 0.425 H 1.80 2.20 2.15 J 0 0.10 0.05 K 0.90 1.00 1.00 L 0.25 0.40 0.30 M 0.10 0.22 0.11 0° 8° All Dimensions in mm A B C H K M J D F C2 Z L C2 C1 G Dimensions Value (in mm) Z G X Y C1 C2 2.5 1.3 0.42 0.6 1.9 0.65 Y X 74AUP1G97 Document number: DS36854 Rev. 1 - 2 13 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 X2-DFN0910-6 Package Outline Dimensions and Suggested Pad Layout NEW PRODUCT Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A1 A Seating Plane D e Z1 Z E K K1 L1 L (Pin #1 ID) C0.5X45° b X2-DFN0910-6 Dim Min Max Typ A 0.35 0.30 A1 0 0.03 0.02 b 0.10 0.20 0.15 D 0.85 0.95 0.90 E 0.95 1.05 1.00 e 0.30 K 0.20 K1 0.25 L 0.25 0.35 0.30 L1 0.30 0.40 0.35 Z 0.075 Z1 0.075 All Dimensions in mm X1 Dimensions Value (in mm) G G1 G2 X X1 Y Y1 Y2 Y1 G1 Y2 G Y 0.100 0.050 0.150 0.150 0.750 0.525 0.475 1.150 Pin1 G2 74AUP1G97 Document number: DS36854 Rev. 1 - 2 X 14 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 X2-DFN1010-6 Package Outline Dimensions and Suggested Pad Layout NEW PRODUCT Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A1 A X2-DFN1010-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.14 0.20 0.17 b1 0.05 0.15 0.10 D 0.95 1.05 1.00 E 0.95 1.05 1.00 e –– –– 0.35 L 0.35 0.45 0.40 K 0.15 –– –– Z –– –– 0.065 All Dimensions in mm A3 D (Pin #1 ID) e b1 E K L(6x) b(6x) Z(4x) X1 C Y (6x) Y1 Dimensions Value (in mm) C G X X1 Y Y1 0.350 0.150 0.200 0.900 0.550 1.250 1 G(4x) 74AUP1G97 Document number: DS36854 Rev. 1 - 2 X(6x) 15 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 X2-DFN1410-6 Package Outline Dimensions and Suggested Pad Layout NEW PRODUCT Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for the latest version. A1 A3 A Seating Plane D e (Pin #1 ID) L(6x) E X2-DFN1410-6 Dim Min Max Typ A –– 0.40 0.39 A1 0.00 0.05 0.02 A3 –– –– 0.13 b 0.15 0.25 0.20 D 1.35 1.45 1.40 E 0.95 1.05 1.00 e –– –– 0.50 L 0.25 0.35 0.30 Z –– –– 0.10 Z1 0.045 0.105 0.075 All Dimensions in mm Z1(4x) Z(4x) b(6x) X1 C Y(6x) Y1 1 74AUP1G97 Document number: DS36854 Rev. 1 - 2 G(4x) Dimensions Value (in mm) C 0.500 G 0.250 X 0.250 X1 1.250 Y 0.525 Y1 1.250 X(6x) 16 of 17 www.diodes.com June 2015 © Diodes Incorporated 74AUP1G97 IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). NEW PRODUCT Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright © 2015, Diodes Incorporated www.diodes.com 74AUP1G97 Document number: DS36854 Rev. 1 - 2 17 of 17 www.diodes.com June 2015 © Diodes Incorporated