Datasheet - Diodes Incorporated

74AUP2G3404
BUFFER AND INVERTER
Description
Pin Assignments
The Advanced Ultra Low Power (AUP) CMOS logic family is designed
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
for low power and extended battery life in portable applications.
The 74AUP2G3404 has one buffer and one inverter. Both gates have
push-pull outputs designed for operation over a power supply range
of 0.8V to 3.6V. The device is fully specified for partial power down
applications using IOFF. The IOFF circuitry disables the output
preventing damaging current backflow when the device is powered
down.
Features
Applications
•
Advanced Ultra Low Power (AUP) CMOS
•
Suited for battery and low power needs
•
Supply Voltage Range from 0.8V to 3.6V
•
Wide array of products such as:
•
± 4mA Output Drive at 3.0V
•
Low Static power consumption
ƒ
•
Low Dynamic Power Consumption
ƒ
•
ICC < 0.9µA
CPD = 6pF Typical at 3.6V
Schmitt Trigger Action at All Inputs Make the Circuit Tolerant for
Slower Input Rise and Fall Time. The hysteresis is typically
ƒ
PCs, networking, Notebooks, Netbooks, PDAs
ƒ
Tablet Computers, E-Readers
ƒ
Computer Peripherals, Hard Drives, CD/DVD ROM
ƒ
TV, DVD, DVR, Set Top Box
ƒ
Cell Phones, Personal Navigation / GPS
ƒ
MP3 players ,Cameras, Video Recorders
250mV at VCC = 3.0V
•
IOFF Supports Partial-Power-Down Mode Operation
ƒ
ESD Protection per JESD 22
ƒ
Exceeds 200-V Machine Model (A115)
ƒ
Exceeds 2000-V Human Body Model (A114-)
ƒ
Exceeds 1000-V Charged Device Model (C101)
•
Latch-Up Exceeds 100mA per JESD 78, Class I
•
Leadless packages per JESD30E
ƒ
DFN1410 denoted as X2-DFN1410-6
ƒ
DFN1010 denoted as X2-DFN1010-6
ƒ
DFN0910 denoted as X2-DFN0910-6
•
Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
•
Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free,
"Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl)
and <1000ppm antimony compounds.
Click for Ordering Information
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
1 of 12
www.diodes.com
December 2013
© Diodes Incorporated
74AUP2G3404
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
Pin Descriptions
Pin Name
1A
GND
2A
2Y
Pin No.
1
2
3
4
VCC
5
1Y
6
Function
Data Input
Ground
Data Input
Data Output
Supply Voltage
Data Output
Logic Diagram
1A
2A
1
6
3
4
1Y
2Y
Function Tables
Input
1A
Output
1Y
H
L
H
L
Input
2A
H
L
Output
2Y
L
H
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
2 of 12
www.diodes.com
December 2013
© Diodes Incorporated
74AUP2G3404
Absolute Maximum Ratings (Note 4) (@TA = +25°C, unless otherwise specified.)
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
Symbol
Description
Rating
Unit
ESD HBM
Human Body Model ESD Protection
2
KV
ESD CDM
Charged Device Model ESD Protection
1
KV
ESD MM
200
V
Supply Voltage Range
-0.5 to 4.6
V
VI
Input Voltage Range
-0.5 to 4.6
V
VO
Voltage applied to output in high or low state
-0.5 to VCC +0.5
V
IIK
Input Clamp Current VI < 0
50
mA
IOK
Output Clamp Current (VO < 0 )
-50
mA
IO
Continuous Output Current (VO = 0 to VCC)
±20
mA
ICC
Continuous Current Through VCC
50
mA
IGND
Continuous Current Through GND
-50
mA
Operating Junction Temperature
-40 to +150
°C
Storage Temperature
-65 to +150
°C
VCC
TJ
TSTG
Note:
Machine Model ESD Protection
4. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability. These are stress values and device
operation should be within recommend values.
Recommended Operating Conditions (Note 5) (@TA = +25°C, unless otherwise specified.)
Symbol
VCC
VI
VO
IOH
IOL
∆t/∆V
TA
Note:
Operating Voltage
Input Voltage
Output Voltage
High-Level Output Current
Low-Level Output Current
Input transition rise or fall rate
Operating free-air temperature
Parameter
—
Min
0.8
0
0
—
—
—
—
—
—
—
—
—
—
—
—
—
-40
VCC = 0.8V
VCC = 1.1V
VCC = 1.4V
VCC = 1.65V
VCC = 2.3V
VCC = 3.0V
VCC = 0.8V
VCC = 1.1V
VCC = 1.4V
VCC = 1.65V
VCC = 2.3V
VCC = 3.0V
VCC = 0.8V to 3.6V
—
Max
3.6
3.6
VCC
-20
-1.1
-1.7
-1.9
-3.1
-4
20
1.1
1.7
1.9
3.1
4
200
+125
Unit
V
V
V
µA
mA
μA
mA
ns/V
°C
5. Unused inputs should be held at VCC or Ground.
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
3 of 12
www.diodes.com
December 2013
© Diodes Incorporated
74AUP2G3404
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
Electrical Characteristics (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
VIH
High-Level Input
Voltage
VIL
Low-Level Input
Voltage
VOH
VOL
II
IOFF
∆IOFF
ICC
∆ICC
High-Level
Output Voltage
Low-Level Input
Voltage
Input Current
Power Down
Delta Power
Supply Current
Additional Supply
Test Conditions
—
—
—
—
—
—
—
—
IOH = -20μA
IOH = -1.1mA
IOH = -1.7mA
IOH = -1.9mA
IOH = -2.3mA
IOH = -3.1mA
IOH = -2.7mA
IOH = -4mA
IOL = 20μA
IOL = 1.1mA
IOL = 1.7mA
IOL = 1.9mA
IOL = 2.3mA
IOL = 3.1mA
IOL = 2.7mA
IOL = 4mA
A or B Input
VI or VO = 0V to 3.6V
VI or VO = 0V to 3.6V
VI = GND or VCC, IO = 0
One input at VCC –0.6V Other
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
VCC
0.8V to 1.65V
1.65V to 1.95V
2.3V to 2.7V
3.0V to 3.6V
0.8V to 1.65V
1.65V to 1.95V
2.3V to 2.7V
3.0V to 3.6V
0.8V to 3.6V
1.1V
1.4V
1.65V
2.3V
3V
0.8V to 3.6V
1.1V
1.4V
1.65V
2.3V
3V
0V to 3.6V
0V
0V to 0.2V
0.8V to 3.6V
3.3V
TA =-40 to +85°C
TA = +25°C
Min
Max
Min
Max
—
—
0.80 X VCC
0.80 X VCC
—
—
0.65 X VCC
0.65 X VCC
1.6
—
1.6
—
2.0
—
2.0
—
—
—
0.30 X VCC
0.30 X VCC
—
—
0.35 X VCC
0.35 X VCC
—
0.7
—
0.7
—
0.9
—
0.9
—
—
VCC – 0.1
VCC – 0.1
—
—
0.7 X VCC
0.75 X VCC
1.11
—
1.03
—
1.32
—
1.3
—
2.05
—
1.97
—
1.9
—
1.85
—
2.72
—
2.67
—
2.6
—
2.55
—
—
0.1
—
0.1
—
—
0.3 X VCC
0.3 X VCC
—
0.31
—
0.37
—
0.31
—
0.35
—
0.31
—
0.33
—
0.44
—
0.45
—
0.31
—
0.33
—
0.44
—
0.45
—
± 0.1
—
± 0.5
—
± 0.2
—
± 0.6
—
± 0.2
—
± 0.6
—
0.5
—
0.9
—
40
—
50
4 of 12
www.diodes.com
Unit
V
V
V
V
μA
μA
μA
μA
μA
December 2013
© Diodes Incorporated
74AUP2G3404
Electrical Characteristics (cont.) (@TA = +25°C, unless otherwise specified.)
Symbol
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
VIH
VIL
VOH
Parameter
High-Level Input Voltage
Low-Level Input Voltage
High-Level Output Voltage
Test Conditions
VCC
—
0.8V to 1.65V
0.80 X VCC
Max
—
—
1.65V to 1.95V
0.70 X VCC
—
—
—
—
2.3V to 2.7V
3.0V to 3.6V
—
—
0.8V to 1.65V
1.6
2.0
—
0.25 X VCC
—
1.65V to 1.95V
—
0.30 X VCC
—
—
2.3V to 2.7V
3.0V to 3.6V
—
—
IOH = -20μA
0.8V to 3.6V
VCC – 0.11
0.7
0.9
—
IOH = -1.1mA
1.1V
0.6 X VCC
—
IOH = -1.7mA
1.4V
0.93
—
IOH = -1.9mA
1.65V
1.17
—
1.77
—
1.67
—
2.40
—
IOH = -2.3mA
2.3V
IOH = -3.1mA
IOH = -2.7mA
3V
Low-Level Input Voltage
—
IOL = 20μA
—
0.11
IOL = 1.1mA
1.1V
—
0.33 X VCC
IOL = 1.7mA
1.4V
—
0.41
IOL = 1.9mA
1.65V
—
0.39
—
0.36
—
0.50
—
0.36
—
0.50
2.3V
IOL = 3.1mA
IOL = 2.7mA
3V
IOL = 4mA
II
IOFF
∆IOFF
ICC
∆ICC
V
V
0.8V to 3.6V
IOL = 2.3mA
Unit
V
2.30
IOH = -4mA
VOL
TA = -40 to 125°C
Min
V
Input Current
A or B Input, VI = GND to 3.6V
0V to 3.6V
—
± 0.75
μA
Power Down Leakage Current
VI or VO = 0V to 3.6V
0V
—
± 1.0
μA
Delta Power Down Leakage
Current
VI or VO = 0V to 3.6V
0V to 0.2V
—
± 2.5
μA
Supply Current
VI = GND or VCC, IO = 0
0.8V to 3.6V
—
1.4
μA
Additional Supply Current
Input at VCC –0.6V Other input at
VCC or GND
3.3V
—
75
μA
Operating and Package Characteristics
TA = +25°C
Parameter
Cpd
Power dissipation capacitance
Test
Conditions
VCC
Typ
Unit
f = 1MHz
No Load
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
5.1
5.2
5.2
5.5
5.7
6.0
pF
CI
Input Capacitance
Vi = VCC or GND
0V or 3.3V
2.0
pF
CO
Output Capacitance
VO = VCC or GND
0V
3.5
pF
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
5 of 12
www.diodes.com
December 2013
© Diodes Incorporated
74AUP2G3404
Switching Characteristics
CL = 5pF see Figure 1
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
Parameter
tpd
From
Input
A
TO
OUTPUT
Y
VCC
TA = +25°C
Min
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
2.4
1.8
Typ
16.0
5.0
3.6
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
1.5
1.2
1.1
2.9
2.4
2.1
TA = -40 to +85°C
TA = -40 to +125°C
Max
Min
Max
Min
Max
10.3
6.4
2.0
1.6
11.4
7.4
2.0
1.6
12.6
8.2
5.0
3.9
3.2
1.4
1.1
1.0
5.9
4.5
3.9
1.4
1.1
1.0
6.5
5.0
4.3
Unit
ns
CL = 10pF see Figure 1
Parameter
tpd
From
Input
A
TO
OUTPUT
Y
VCC
TA = +25°C
Min
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
2.8
2.3
2.0
1.7
Typ
19.8
5.9
4.2
3.5
2.9
3.3V ± 0.3V
1.6
2.7
TA = -40 to +85°C
TA = -40 to +125°C
Max
Min
Max
Min
Max
12.2
7.5
5.9
4.6
2.3
1.9
1.7
1.5
13.7
8.7
7.0
5.4
2.3
1.9
1.7
1.5
15.1
9.6
7.7
6.0
3.8
1.4
4.5
1.4
5.1
Unit
ns
CL = 15pF see Figure 1
Parameter
From
Input
TO
OUTPUT
VCC
TA = +25°C
tpd
A
Y
TA = -40 to +125°C
Typ
23.3
Max
Min
Max
Min
Max
3.2
2.6
2.3
2.1
2.0
6.7
4.7
4.0
3.3
3.1
13.0
8.6
6.7
5.1
4.2
2.6
2.2
2.0
1.8
1.6
15.8
10.0
8.0
6.1
5.0
2.6
2.2
2.0
1.8
1.6
17.4
11.0
8.8
6.8
5.5
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
TA = -40 to +85°C
Min
Unit
ns
CL = 30pF see Figure 1
Parameter
tpd
From
Input
A
TO
OUTPUT
Y
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
VCC
TA = +25°C
Min
0.8V
1.2V ± 0.1V
1.5V ± 0.1V
4.4
3.6
Typ
33.6
8.9
6.3
1.8V ± 0.15V
2.5V ± 0.2V
3.3V ± 0.3V
3.2
2.4
2.2
5.3
4.5
4.2
TA = -40 to +85°C
TA = -40 to +125°C
Max
Min
Max
Min
Max
16.3
10.8
3.6
3.2
19.0
12.9
3.6
3.2
20.9
14.2
9.0
6.5
5.6
2.9
2.6
2.2
10.5
7.6
6.2
2.9
2.6
2.2
11.6
8.5
7.2
6 of 12
www.diodes.com
Unit
ns
December 2013
© Diodes Incorporated
74AUP2G3404
Parameter Measurement Information
From Output
Under Test
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
CL
R L=1MΩ
(see Note A)
VCC
0.8 V
Inputs
VI
tr/tf
VM
CL
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
1.2V±0.1V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
1.5V±0.1V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
1.8V±0.15V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
2.5V±0.2V
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
VCC
≤3ns
VCC/2
5, 10, 15, 30pF
3.3V±0.3V
Voltage Waveform Pulse Duration
Voltage Waveform Propagation Delay Times
Inverting and Non Inverting Outputs
Figure 1 Load Circuit and Voltage Waveforms
Notes:
A. Includes test lead and test apparatus capacitance.
B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.
C. Inputs are measured separately one transition per measurement.
D. tPLH and tPHL are the same as tPD.
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
7 of 12
www.diodes.com
December 2013
© Diodes Incorporated
74AUP2G3404
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
Ordering Information
Package Code
Packaging
(Note 7)
74AUP2G3404FZ4-7
FZ4
X2-DFN1410-6
7” Tape and Reel
Quantity
Part Number Suffix
5000/Tape & Reel
-7
74AUP2G3404FW4-7
74AUP2G3404FW3-7
FW4
FW3
X2-DFN1010-6
X2-DFN0910-6
5000/Tape & Reel
5000/Tape & Reel
Device
Note:
-7
-7
7. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf
8. For packaging details, go to our website at http://www.diodes.com/products/packages.html
Marking Information
(1) X2-DFN1410-6, X2-DFN1010-6, X2-DFN0910-6
Part Number
74AUP2G3404FZ4
74AUP2G3404FW4
74AUP2G3404FW3
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
Package
X2-DFN1410-6
X2-DFN1010-6
X2-DFN0910-6
8 of 12
www.diodes.com
Identification Code
RU
SU
MU
December 2013
© Diodes Incorporated
74AUP2G3404
Package Outline Dimensions (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
(1)
Package Type X2-DFN1410-6
A3
A1
A
Seating Plane
D
e
(Pin #1 ID)
L(6x)
E
Z1(4x)
Z(4x)
(2)
X2-DFN1410-6
Dim Min
Max
Typ
A
––
0.40 0.39
A1
0.00 0.05 0.02
A3
––
––
0.13
b
0.15 0.25 0.20
D
1.35 1.45 1.40
E
0.95 1.05 1.00
e
––
––
0.50
L
0.25 0.35 0.30
Z
––
––
0.10
Z1 0.045 0.105 0.075
All Dimensions in mm
b(6x)
Package Type: X2-DFN1010-6
A
A1
A3
X2-DFN1010-6
Dim Min Max Typ
A
––
0.40 0.39
A1
0.00 0.05 0.02
A3
––
––
0.13
b
0.14 0.20 0.17
b1
0.05 0.15 0.10
D
0.95 1.05 1.00
E
0.95 1.05 1.00
e
––
––
0.35
L
0.35 0.45 0.40
K
0.15
––
––
Z
––
–– 0.065
All Dimensions in mm
D
(Pin #1 ID)
e
b1
E
K
L(6x)
Z(4x)
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
b(6x)
9 of 12
www.diodes.com
December 2013
© Diodes Incorporated
74AUP2G3404
Package Outline Dimensions (cont.) (All dimensions in mm.)
Please see AP02002 at http://www.diodes.com/datasheets/ap02002.pdf for latest version.
(3)
Package Type: X2-DFN0910-6
A
D
X
4
Z
︵
︶
X
4
1
Z
e
︵
︶
1
K
K
E
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
︵ ︶
1
L
︵ ︶
x
6
b
x
5
L
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
1
A
Seating Plane
X2-DFN0910-6
Dim
Min
Max
Typ
A
0.35
0.30
A1
0
0.03
0.02
b
0.10 0.20
0.15
D
0.85 0.95
0.90
E
0.95 1.05
1.00
e
0.30
K
0.20
K1
0.25
L
0.25 0.35
0.30
L1
0.30 0.40
0.35
Z
0.075
Z1
0.075
All Dimensions in mm
(Pin #1 ID)
C0.5X45°
10 of 12
www.diodes.com
December 2013
© Diodes Incorporated
74AUP2G3404
Suggested Pad Layout
Please see AP02001 at http://www.diodes.com/datasheets/ap02001.pdf for the latest version.
(1)
Package Type X2-DFN1410-6
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
X1
C
Y(6x)
Dimensions
C
G
X
X1
Y
Y1
Y1
1
(2)
G(4x)
Value
(in mm)
0.500
0.250
0.250
1.250
0.525
1.250
X(6x)
Package Type: X2-DFN1010-6
X1
C
Y (6x)
Dimensions
C
G
X
X1
Y
Y1
Y1
1
G(4x)
(3)
Value
(in mm)
0.350
0.150
0.200
0.900
0.550
1.250
X(6x)
Package Type: X2-DFN0910-6
1
X
Value
(in mm)
G
G1
G2
X
X1
Y
Y1
Y2
0.100
0.050
0.150
0.150
0.750
0.525
0.475
1.150
1
Y
Dimensions
1
G
G
2
Y
Y
1
n
i
P
Document number: DS36096 Rev. 4 - 2
X
2
G
74AUP2G3404
11 of 12
www.diodes.com
December 2013
© Diodes Incorporated
74AUP2G3404
IMPORTANT NOTICE
NEW
PRODUCT
ADVANCED
INFORMATION
ADVANCED
INFORMATION
NEW
PRODUCT
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall
assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes
Incorporated website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales
channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify
and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of,
directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and
markings noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is
the final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the
express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause
the failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems,
and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products
and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systemsrelated information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and
its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or
systems.
Copyright © 2013, Diodes Incorporated
www.diodes.com
74AUP2G3404
Document number: DS36096 Rev. 4 - 2
12 of 12
www.diodes.com
December 2013
© Diodes Incorporated