8WH6 iPo Installation Terminals 3 3/2 Introduction 3/4 8WH through-type terminals 3/6 8WH through-type screw terminals 3/8 8WH N-conductor isolating terminals 3/10 8WH N-conductor isolating screw terminals 3/12 8WH installation terminals More technical product information: Service&Support Portal: www.support.automation.siemens.com Product List: Technical specifications Entry List: Updates / Downloads / FAQ / Manuals / Operating instructions / Characteristic curves / Certificates 3 8WH6 iPo Installation Terminals Introduction 3 ■ Overview 3/2 Devices Page Function 8WH through-type terminals 3/4 Connection of incoming and outgoing conductors up to 6 mm2 8WH through-type screw terminals 3/6 Connection of incoming and outgoing conductors up to 35 mm2 with screw terminals 8WH N-conductor isolating terminals 3/8 Terminal blocks up to 6 mm² and connection of an N-busbar 10 mm × 3 mm 8WH N-conductor isolating screw terminals 3/10 Terminal blocks with screw connection up to 35 mm² and connection of an N-busbar 10 mm × 3 mm 8WH installation terminals 3/12 Terminal blocks for connection of an N-busbar 10 mm × 3 mm. These terminals offer up to three terminal functions in a single enclosure and are optimized for distribution board applications in installation technology. 8WH6 iPo Installation Terminals Introduction Terminal type iPo technology Screw terminals Design Standard Standard iPo technology Order No. (digits 8 ... 12) Insta No. of clamping points 2 2 Order No. (digits 1 ... 7) 8WH6 000 8WH1 001 8WH6 001 Conductor cross-section Terminal type1) Color 2.5 mm2 Gray ✔ -- -- 0AF00 Blue ✔ -- -- 0AF01 N-conductor isolating Blue ✔ -- -- 0BF00 PE Green/yellow ✔ -- -- 0CF07 Gray -- -- ✔ 4QF00 L/L -- -- ✔ 4DF00 L/N -- -- ✔ 4CF00 PE/L/L -- -- ✔ 4HF00 PE/L/N -- -- ✔ 4EF00 PE/L/NT -- -- ✔ 4FF00 PE/L/N isolating blade -- -- ✔ 4GF00 PE/L/L isolating blade -- -- ✔ 4NF00 Gray ✔ -- -- 0AG00 Blue ✔ -- -- 0AG01 N-conductor isolating Gray ✔ -- -- 0BG00 PE Green/yellow ✔ -- -- 0CG07 Through-type Gray ✔ -- -- 0AH00 Blue ✔ -- -- 0AH01 N-conductor isolating Blue ✔ -- -- 0BH00 PE Green/yellow ✔ -- -- 0CH07 10 mm2 N-conductor isolating Blue -- ✔ -- 0BJ01 16 mm2 Through-type Blue -- ✔ -- 0AK01 Gray -- ✔ -- 0AK00 N-conductor isolating Blue -- ✔ -- 0BK01 PE Green/yellow -- ✔ -- 0CK07 Through-type Gray -- ✔ -- 0AM00 Blue -- ✔ -- 0AM01 N-conductor isolating Blue -- ✔ -- 0BM01 PE Green/yellow -- ✔ -- 0CM07 Through-type Insta 4 mm2 6 mm2 35 mm2 1) L Through-type Only the main terminal types are listed here. You will find further versions on the following pages. 3/3 3 8WH6 iPo Installation Terminals 8WH through-type terminals 3 ■ Overview All types of conductors can be used with 8WH6 iPo technology. Rigid conductors and crimped flexible conductors are plugged directly into the terminal. Flexible, untreated conductors can be connected using a screwdriver. These terminals can be used interconnected with the N-busbar 10 × 3 mm. A label can be snapped on to the middle of each terminal at the front. Labels can also be mounted flat on the clamping points of the terminals. ■ Technical specifications 8WH6 001-0AF00 8WH6 001-0CF07 8WH6 001-0AG00 8WH6 000-0CG07 8WH6 001-0AH00 8WH6 001-0AH07 8WH6 001-0AF00 8WH6 001-0AG01 8WH6 001-0AH01 Cross-section mm² 2.5 mm 5.2 / 59.5 / 2.2 43 / 50.5 2.5 (PE) 4 4 (PE) 6 6 (PE) Dimensions • Width/length/width of cover • Height (TS 35/7.5 / TS 35/15) mm 6.2 / 66 / 2.2 46.3 / 53.8 8.2 / 66 / 2.2 50 / 57.5 Rated current In / cross-section A/ mm² 24 / 2.5 -- / 2.5 32 / 4 -- / 4 41 / 6 -- / 6 Max. load current Imax / cross-section A/ mm² 24 / 4 -- / 4 32 / 6 -- / 6 50/10 -- / 10 Rated voltage Un V 800 -- 800 -- 800 -- • Rigid mm² 0.14 ... 4 • Flexible with end sleeve mm² 0.25 ... 2.5 0.2 ... 6 0.25 ... 4 Stripped length mm 10 12 10 12 -- See section "Support rails" on page 1/3 -- Connection capacities Molded plastic type 0.5 ... 10 0.5 ... 6 PA V0 Flammability class acc. to UL 94 Support rails/protective conductor busbars -- See section "Support rails" on page 1/3 See section "Support rails" on page 1/3 ■ Selection and ordering data Version DT Order No. Price PU per PU (UNIT, SET, M) PS*/ P. unit PG Terminal size 2.5 mm² 8WH6 001-0AF00 Through-type terminals, terminal size 2.5 mm², acc. to IEC 60 947-7-1 • Terminal width 5.2 mm, terminal length 59.5 mm • Terminal height (NS 35/7.5) 43 mm • Max. load current Imax = 24 A • Rated voltage Un = 800 V • Rigid 0.14 ... 4 mm² • Flexible with end sleeve 0.14 ... 2.5 mm² • AWG 26-12 Versions 8WH6 001-0CF07 3/4 • Gray • Blue 8WH6 001-0AF00 8WH6 001-0AF01 1 50 units 1 50 units 044 044 PE through-type terminals, terminal size 2.5 mm², IEC 60 947-7-2 • Green/yellow • Terminal width 5.2 mm, terminal length 59.5 mm • Terminal height 43 mm • Cross-section max. 4 mm² • Rigid 0.2 ... 4 mm² • Flexible with end sleeve 0.2 ... 2.5 mm² • AWG 24-12 8WH6 001-0CF07 1 50 units 044 * You can order this quantity or a multiple thereof. 8WH6 iPo Installation Terminals 8WH through-type terminals Version DT Order No. Price PU per PU (UNIT, SET, M) PS*/ P. unit PG Terminal size 4 mm² 8WH6 001-0AG00 Through-type terminals, terminal size 4 mm², acc. to IEC 60947-7-1 • Terminal width 6.2 mm • Terminal length 66 mm • Terminal height 46.3 mm • Max. load current Imax = 32 A • Rated voltage Un = 800 V • Rigid 0.2 ... 6 mm² • Flexible with end sleeve 0.2 ... 4 mm² • AWG 24-10 Versions 8WH6 001-0AG07 • Gray • Blue 8WH6 001-0AG00 8WH6 001-0AG01 1 50 units 1 50 units 044 044 PE through-type terminals, terminal size 4 mm², acc. to IEC 60947-7-2 • Green/yellow • Terminal width 6.2 mm • Terminal length 66 mm • Terminal height 46.3 mm • Rigid 0.2 ... 6 mm² • Flexible with end sleeve 0.2 ... 4 mm² • AWG 24-10 8WH6 001-0CG07 1 50 units 044 • Gray • Blue 8WH6 001-0AH00 8WH6 001-0AH01 1 50 units 1 50 units 044 044 PE through-type terminals, terminal size 6 mm², acc. to IEC 60947-7-2 • Green/yellow • Terminal width 8.2 mm • Terminal length 66 mm • Terminal height 50 mm • Rigid 0.5 ... 10 mm² • Flexible without end sleeve 0.5 ... 10 mm² • Flexible with end sleeve 0.5 ... 6 mm² • AWG 20-8 8WH6 001-0CH07 1 50 units 044 8WH9 143-0AF01 8WH9 143-0AH01 1 50 units 1 50 units 044 044 8WH9 000-1WA00 8WH9 003-7WA00 8WH9 004-1WA00 100 50 units 100 50 units 100 50 units 044 044 044 Terminal size 6 mm² 8WH6 001-0AH00 Through-type terminals, terminal size 6 mm², acc. to IEC 60947-7-1 • Terminal width 8.2 mm • Terminal length 66 mm • Terminal height 50 mm • Max. load current Imax = 41 A • Rated voltage Un = 800 V • Rigid 0.5 ... 10 mm² • Flexible with end sleeve 0.5 ... 6 mm² • AWG 20 ... 8 Versions 8WH6 001-0AH01 8WH6 001-0AH07 Accessories Support brackets • Made of blue molded plastic • For holding the N-busbar Versions • For terminal size 2.5 ... 4 mm² • For terminal size 6 mm² 8WH9 143-0AF01 Covers Gray Versions 8WH9 000-1WA00 • For terminal size 2.5 mm² • For terminal size 4 mm² • For terminal size 6 mm² Note: For general accessories for 8WH terminal blocks, see chapter 8. * You can order this quantity or a multiple thereof. 3/5 3 8WH6 iPo Installation Terminals 8WH through-type screw terminals 3 ■ Overview We offer a comprehensive range of installation terminals with iPo technology for use in building management systems. We also offer a range of compact, cost-effective terminal blocks with screw terminals for connecting larger cross-sections. Terminal blocks mounted on N-busbars are most commonly used in building management systems. In order to enable the butt-mounting of different terminals, contact to the N-busbar is always on the same mounting level. This means that 8WH1-001 screw terminals and 8WH6-001 plug-in terminals can be combined as required and mounted on a single support rail. Labels can be affixed at each clamping point by simply snapping them on at the front. ■ Technical specifications 8WH1 001-0AK00 8WH1 001-0AK01 8WH1 001-0CK07 8WH1 001-0AM00 8WH1 001-0AM01 8WH1 001-0CM07 Cross-section mm² 16 16 (PE) 35 35 (PE) Max. cross-section with comb (rigid/flexible) mm² 16 / 16 -- 35 / 35 -- • Width/length/width of cover mm 12.2 / 42.5 / 1.8 12.2 / 42.5 / -- 15.2 / 55 / -- 15.2 / 55 / -- • Height (TS 35/7.5 / TS 35/15) mm 47 / 54.5 / 52 47 / 54.5 / 52 51 / 58.5 / 56 51 / 58.5 / 56 Max. load current Imax /cross-section A/ mm² 101 / 25 101 / 25 125 / 35 125 / 35 Rated impulse withstand voltage/pollution degree kV 6/3 6/3 8/3 8/3 III / I III / I III / I III / I 0.75 ... 35 0.75 ... 35 Dimensions Overvoltage category / molded plastic group Connection capacities • For one conductor - Rigid - Flexible with end sleeve mm² mm² 1.5 ... 16 1.5 ... 16 1.5 ... 16 1.5 ... 16 0.75 ... 35 0.75 ... 35 • For two conductors of same cross-section - Rigid / flexible - Flexible with end sleeve mm² mm² 1.5 ... 6 / 1.5 ... 6 1.5 ... 4 1.5 ... 6 / 1.5 ... 4 1.5 ... 6 0.75 ... 15 / 0.75 ... 10 0.75 ... 16 / 0.75 ... 10 0.75 ... 10 0.75 ... 10 Stripped length mm 11 11 16 16 B7 B7 B9 B9 Plug gauge (IEC 60947-1) Clamping point: Screw thread / tightening torque Nm M4 / 1.5 ... 1.8 M4 / 1.5 ... 1.8 M6 / 3.2 ... 3.7 M5 / 3.2 ... 3.7 Fixing: Screw thread / tightening torque Nm -- M4 / 1.5 ... 1.8 -- M5 / 2.5 ... 3 PA V2 PA V2 PA V2 PA V2 Molded plastic type Flammability class acc. to UL 94 Approval data (UL/cUL and CSA) • UL/cUL - Rated voltage / rated current / conductor sizes V/A/AWG 600 / 85 / 22-4 -- / -- / 22-4 600 / 115 / 18-2 -- / -- / 18-2 • CSA - Rated voltage / rated current / conductor sizes V/A/AWG 600 / 85 / 22-4 -- / -- / 22-4 600 / 130 / 18-2 -- / -- / -- ■ Selection and ordering data Version Order No. MOQ* Terminal size 16 mm² Through-type screw terminals, terminal size 16 mm² Width 12.2 mm Versions • Gray • Blue 8WH1 001-0AK00 8WH1 001-0AK01 50 units 50 units 8WH1 001-0AK00 3/6 * You can order this quantity or a multiple thereof. 8WH6 iPo Installation Terminals 8WH through-type screw terminals Version Order No. MOQ* Terminal size 16 mm² (contd.) 8WH1 001-0CK07 50 units • Gray • Blue 8WH1 001-0AM00 8WH1 001-0AM01 50 units 50 units Through-type screw PE terminals, terminal size 35 mm² • Width 16 mm • Enclosed at both ends • Green/yellow 8WH1 001-0CM07 50 units Covers, for screw terminals • 10/16 mm2 • Width 2 mm • Gray 8WH9 005-3PA00 50 units Bridge, 10-pole For through-type terminals, 16 mm2, gray and blue 8WH9 030-6AL00 10 units Bridge, 2-pole For through-type terminals, 35 mm2, gray and blue 8WH9 030-6BC00 10 units Bridge, 3-pole For through-type terminals, 35 mm2, gray and blue 8WH9 030-6BD00 10 units Compartment partitions For through-type terminals, 16 mm2, gray and blue 8WH9 070-6HA00 50 units Insulation plates For through-type terminals, 16 and 35 mm2, gray and blue 8WH9 070-6GA00 50 units Through-type screw PE terminals, terminal size 16 mm² • Width 12.2 mm • Enclosed at both ends • Green/yellow 8WH1 001-0CK07 Terminal size 35 mm² Through-type screw terminals, terminal size 35 mm² • Width 16 mm • Enclosed at both ends Versions 8WH1 001-0AM00 8WH1 001-0CM07 Accessories 8WH9 005-3PA00 8WH9 030-6AL00 8WH9 030-6BC00 8WH9 030-6BD00 8WH9 070-6HA00 8WH9 070-6GA00 Note: For general accessories for 8WH terminal blocks, see chapter 8. * You can order this quantity or a multiple thereof. 3/7 3 8WH6 iPo Installation Terminals 8WH N-conductor isolating terminals 3 ■ Overview The N-conductor disconnect slides are in the same position on all 8WH6-001 terminals using iPo plug-in technology. A 10 mm × 3 mm busbar is used. Notice: Only use Cu busbars. Installation instructions: To ensure that the N-busbars are securely mounted, the support brackets must be placed at the beginning and end of each terminal strip (in the case of longer terminal strips: every 20 cm). A label can be snapped on to the middle of the terminal at the front. Labels can also be mounted flat on the clamping points of the terminals (not with N-busbar connection). ■ Technical specifications 8WH6 001-0BF01 8WH6 001-0BG01 8WH6 001-0BH01 mm² 2.5 4 6 • Width/length/width of cover mm 5.2 / 59 / 2.2 6.2 / 66 / 2.2 8.2 / 66 / 2.2 • Height (NS 35/7.5 / NS 35/15) mm 46.3/ 53.8 46.3/ 53.8 50 / 57.5 Rated current In / cross-section A/ mm² 24 / 2.5 32 / 4 41 / 6 Rated voltage Un V 250 250 400 Connection capacities • Rigid • Flexible with end sleeve mm² mm² 0.14 ... 4 0.25 ... 2.5 0.2 ... 6 0.25 ... 4 0.5 ... 10 0.5 ... 6 Stripped length mm 10 10 12 PA V0 PA V0 PA V0 Cross-section Dimensions Molded plastic type • Flammability class acc. to UL 94 3/8 8WH6 iPo Installation Terminals 8WH N-conductor isolating terminals ■ Selection and ordering data Version Order No. MOQ* N-conductor isolating terminals, terminal size 2.5 mm², acc. to IEC 60947-7-1 • Two clamping points • Terminal width 5.2 mm • Terminal length 59 mm • Terminal height (NS 35/7.5) 46.3 mm • Rated current 24 A / cross-section 2.5 mm² • Rated voltage Un = 250 V • Rigid 0.14 ... 4 mm² • Flexible with end sleeve 0.14 ... 2.5 mm² • AWG 26 to 12 8WH6 001-0BF01 50 units N-conductor isolating terminals, terminal size 4 mm², acc. to IEC 60947-7-1 • Two clamping points • Terminal width 6.2 mm • Terminal length 66 mm • Terminal height (NS 35/7.5) 46.3 mm • Rated current 32 A / cross-section 4 mm² • Rated voltage Un = 250 V • Rigid 0.2 ... 6 mm² • Flexible with end sleeve 0.25 ... 4 mm² • AWG 24 to 10 8WH6 001-0BG01 50 units N-conductor isolating terminals, terminal size 6 mm², acc. to IEC 60947-7-1 • Two clamping points • Terminal width 8.2 mm • Terminal length 66.3 mm • Terminal height (NS 35/7.5) 50 mm • Max. load current Imax = 41 A • Rated current 41 A / cross-section 6 mm² • Rated voltage Un = 400 V • Rigid 0.5 ... 10 mm² • Flexible with end sleeve 0.5 ... 6 mm² • AWG 20-8 8WH6 001-0BH01 50 units 8WH9 143-0AF01 8WH9 143-0AH01 50 units 50 units 8WH9 000-1SA00 8WH9 003-1SA00 8WH9 004-1SA00 50 units 50 units 1 unit • Rated uninterrupted current 32 A, for connection of up to 4 mm 2 • Rated uninterrupted current 76 A, for connection of up to 25 mm 2 • Rated uninterrupted current 125 A, for connection of up to 35 mm 2 8WA2 867 8WA2 868 8WA2 870 50 units 50 units 50 units N-busbars, 10 mm × 3 mm • Tin-plated • 1000 mm long 8WA2 842 1 unit Terminal size 2.5 mm² 8WH6 001-0BF01 Terminal size 4 mm² 8WH6 001-0BG01 Terminal size 6 mm² 8WH6 001-0BH01 Accessories Support brackets • Made of blue molded plastic • For holding the N-busbar Versions • For terminal size 2.5 ... 4 mm² • For terminal size 6 mm² 8WH9 143-0AF01 Covers Gray Versions 8WH9 000-1SA00 • For terminal size 2.5 mm² • For terminal size 4 mm² • For terminal size 6 mm² Feeder terminals, for N-busbars • 6 × 6 mm and 10 × 3 mm • Bare Versions 8WA2 867/8WA2 868/ 8WA2 870 8WA2 842 Note: For general accessories for 8WH terminal blocks, see chapter 8. * You can order this quantity or a multiple thereof. 3/9 3 8WH6 iPo Installation Terminals 8WH N-conductor isolating screw terminals 3 ■ Overview We offer a comprehensive range of installation terminals with iPo plug-in technology for use in building management systems. We also offer a range of compact, cost-effective terminal blocks with screw terminals for connecting larger cross-sections. Terminal blocks mounted on N-busbars are most commonly used in building management systems. In order to enable the butt-mounting of different terminals, contact to the N-busbar is always on the same mounting level. This means that 8WH1-001 screw terminals and 8WH6-001 plug-in terminals can be combined as required and mounted on a single support rail. The compact design of our N-conductor isolating terminals makes for a neat and clearly arranged terminal strip. The N-busbar can be connected over the terminal or over the disconnect slide of the N-conductor isolating terminal. The N-conductor isolating terminal also makes it easy to perform insulation measurements. Labels can be affixed on the clamping points (screw) by simply snapping them on at the front. Notice: Only use Cu busbars. ■ Technical specifications 8WH1 001-0BJ01 8WH1 001-0BK01 8WH1 001-0BM01 mm² 10 16 35 • Width/length/width of cover mm 10.2 / 43.5 / 1.8 12.2 / 43.5 / 1.5 16 / 55 / -- • Height (TS 35/7.5 / TS 35/15) mm 47 / 54.5 / 52 54 / 61.5 / 59 51 / 58.5/ 56 Max. load current Imax /cross-section A/ mm² 63 / 16 90 / 25 110 / 35 Rated impulse withstand voltage/pollution degree kV 6/3 6/3 6/3 III / I III / I III / I Cross-section Dimensions Overvoltage category / molded plastic group Connection capacities • For one conductor - Rigid - Flexible with end sleeve mm² mm² 0.5 ... 10 0.5 ... 6 1.5 ... 16 1.5 ... 16 0.75 ... 35 0.75 ... 35 • For two conductors of same cross-section - Rigid / flexible - Flexible with end sleeve mm² mm² 0.5 ... 4 / 0.5 ... 4 0.5 ... 2.5 1.5 ... 6 / 1.5 ... 4 1.5 ... 8 0.75 ... 16 / 0.75 ... 10 0.75 ... 10 Stripped length mm 12 11 16 B5 B6 B9 Plug gauge (IEC 60947-1) Clamping point: Screw thread / tightening torque Nm M4 / 1.5 ... 1.8 M4 / 1.5 ... 1.8 M6 / 3.2 ... 3.7 Fixing: Screw thread / tightening torque Nm M3 / 0.6 ... 0.8 M3 / 0.6 ... 0.8 M5 / 2.5 ... 3 Molded plastic type PA PA PA Flammability class acc. to UL 94 V2 V2 V2 3/10 8WH6 iPo Installation Terminals 8WH N-conductor isolating screw terminals ■ Selection and ordering data Version Order No. MOQ* N-conductor isolating screw terminals, terminal size 10 mm² • Width 10 mm • Blue 8WH1 001-0BJ01 50 units N-conductor isolating screw terminals, terminal size 16 mm² • Width 12 mm • Blue 8WH1 001-0BK01 50 units N-conductor isolating screw terminals, terminal size 35 mm² • Width 16 mm • Enclosed at both ends • Blue 8WH1 001-0BM01 50 units Covers, for screw terminals • 10/16 mm2 • Width 2 mm • Gray 8WH9 005-3PA00 50 units Support brackets for N-conductor isolating screw terminals, terminal size 10 ... 35 mm² • For holding the N-busbar • To be placed every 20 cm • 2 mm wide 8WH9 141-0BA01 50 units • To 16 mm2, width: 10.3 mm • To 35 mm2, width: 14.4 mm, enclosed at both ends 8WH9 126-0BA01 8WH9 127-0BA01 50 units 50 units N-busbars, 10 mm × 3 mm • Made of copper, tin-plated • 1000 mm long 8WA2 842 Terminal size 10 mm² 8WH1 001-0BJ01 Terminal size 16 mm² 8WH1 001-0BK01 Terminal size 35 mm² 8WH1 001-0BM01 Accessories 8WH9 005-3PA00 8WH9 141-0BA01 Terminals Blue Versions 8WH9 126-0BA01 1 unit 8WA2 842 Note: For general accessories for 8WH terminal blocks, see chapter 8. * You can order this quantity or a multiple thereof. 3/11 3 8WH6 iPo Installation Terminals 8WH installation terminals 3 ■ Overview The three-tier plug-in terminals offer optimum operating characteristics for modern building installations. The plug-in connection allows tool-free wiring of the solid conductors. These terminals can be used interconnected with the N-busbar 10 × 3 mm. Notice: Only use Cu busbars. Thanks to their compact design, the three-tier terminals can be installed in all types of building distribution boards. A load circuit can be quickly and easily wired, for example using a 5.2 mm wide installation terminal with terminal size 2.5 mm² and PE/L/NT connections. The double bridge shafts support a multitude of individual wiring tasks. This also means it is practical and convenient to make subsequent modifications to the installation. Labels can be mounted flat on the clamping points of the terminals. ■ Technical specifications Installation terminals, standard version 8WH6 001-4QF00 8WH6 001-4DF00 8WH6 001-4CF00 Installation terminals with isolating function Cross-section 8WH6 001-4GF00 8WH6 001-4NF00 8WH6 001-4PF00 8WH6 001-4MF00 mm² 2.5 mm mm A/ mm² A/ mm² V 5.5 / 101 / 2.2 50.5 / 58 24 / 4 301) / 4 400 (L-L) 250 (L-N or L-PE) • Rigid • Flexible with end sleeve Stripped length without insulation stop sleeve (no insulation stop sleeves should be used when using end sleeves) mm² mm² mm 0.14 ... 4 0.14 ... 2.5 10 Stripped length with insulation stop sleeve (no insulation stop sleeves should be used when using end sleeves) mm 10 Dimensions • Width/length/width of cover • Height (TS 35/7.5 / TS 35/15) Rated current In cross-section Max. load current Imax /cross-section Rated voltage Un Connection capacities Plug gauge (IEC 60947-1) Molded plastic type Flammability class acc. to UL 94 1) 3-pole terminal block 3/12 8WH6 001-0HF00 8WH6 001-4EF00 A3 PA V0 8WH6 001-4FF00 8WH6 iPo Installation Terminals 8WH installation terminals ■ Selection and ordering data Version Order No. MOQ* Terminal size 2.5 mm² 8WH6 001-4QF00 Installation terminals, terminal size 2.5 mm², standard version for Nbusbar • Gray • Terminal width 5.2 mm • Rigid 0.14 ... 4 mm² • Flexible with end sleeve 0.14 ... 2.5 mm² • AWG 26-12 • Rated current 24 A / cross-section 4 mm² • Rated voltage Un = 400 V (L-L) Un = 250 V (L-N or L-PE) Versions 8WH6 001-4DF00 •L • L/L • L/N 8WH6 001-4QF00 8WH6 001-4DF00 8WH6 001-4CF00 50 units 50 units 50 units • PE/L/L • PE/L/N • PE/L/NT 8WH6 001-4HF00 8WH6 001-4EF00 8WH6 001-4FF00 50 units 50 units 50 units • PE/L/L (standard version, suitable for isolating terminal) 8WH6 001-4PF00 50 units • PE/L/N isolating blade • PE/L/L isolating blade 8WH6 001-4GF00 8WH6 001-4NF00 50 units 50 units 8WH6 001-4PF00 8WH6 001-4MF00 50 units 50 units 8WH6 001-4HF00 8WH6 001-4FF00 8WH6 001-4NF00 Installation terminals, terminal size 2.5 mm², with isolating blade • Gray • Terminal width 5.2 mm • Rigid 0.25 ... 4 mm² • Flexible with end sleeve 0.25 ... 2.5 mm² • AWG 22-12 • Rated current 24 A / cross-section 4 mm² • Rated voltage Un = 400 V (L-L) Un = 250 V (L-N or L-PE) Versions 8WH6 001-4PF00 Installation terminals, terminal size 2.5 mm², for isolating function • Gray • Terminal width 5.2 mm • Rigid 0.25 ... 4 mm² • Flexible with end sleeve 0.25 ... 2.5 mm² • AWG 22-12 • Rated current 24 A / cross-section 4 mm² • Rated voltage Un = 400 V (L-L) Un = 250 V (L-PE) Versions • PE/L/L (standard version, suitable for isolating terminal) • PE/L/L isolation * You can order this quantity or a multiple thereof. 3/13 3 8WH6 iPo Installation Terminals 8WH installation terminals 3 Version Order No. MOQ* Support brackets, for terminal size 2.5 mm² • For holding the N-busbar • To be placed every 20 cm • 2 mm wide 8WH9 142-0AF01 50 units Covers, for terminal size 2.5 mm² gray 8WH9 000-3SA00 50 units Covers, for terminal size 2.5 mm² and isolating terminal in contour gray 8WH9 000-6SA00 50 units • Rated uninterrupted current 32 A, for connection of up to 4 mm 2 • Rated uninterrupted current 76 A, for connection of up to 25 mm 2 • Rated uninterrupted current 125 A, for connection of up to 35 mm 2 8WA2 867 8WA2 868 8WA2 870 50 units 50 units 50 units N-busbars, 10 mm × 3 mm • Made of copper, tin-plated • 1000 mm long 8WA2 842 1 unit Accessories 8WH9 142-0AF01 8WH9 000-3SA00 8WH9 000-6SA00 Feeder terminals, for N-busbars • 6 × 6 mm and 10 × 3 mm • Bare Versions 8WA2 867/8WA2 868/ 8WA2 870 8WA2 842 Note: For general accessories for 8WH terminal blocks, see chapter 8. 3/14 * You can order this quantity or a multiple thereof.