KBP005M thru KBP10M, 3N246 thru 3N252 Vishay Semiconductors Glass Passivated Single-Phase Bridge Rectifier Case Style KBPM Major Ratings and Characteristics IF(AV) 1.5 A VRRM 50 V to 1000 V IFSM 50 A IR 5 µA VF 1.0 V Tj max. 150 °C ~ ~ ~ ~ Features Mechanical Data • • • • • Case: KBPM Epoxy meets UL-94V-0 Flammability rating Terminals: Silver plated (E4 Suffix) leads, solderable per J-STD-002B and MIL-STD-750, Method 2026 Polarity: As marked on body UL Recognition file number E54214 Ideal for printed circuit board High surge current capability High case dielectric strength Meets MSL level 1, per J-STD-020C Typical Applications General purpose use in ac-to-dc bridge full wave rectification for Switching Power Supply, Home Appliances, Office Equipment, and Telecommunication applications Maximum Ratings Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Symbol KBP 005M KBP 01M KBP 02M KBP 04M KBP 06M KBP 08M KBP 10M Unit 3N246 3N247 3N248 3N249 3N250 3N251 3N252 * Maximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V * Maximum RMS voltage VRMS 35 70 140 280 420 560 700 V * Maximum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Max. average forward output rectified current at TA = 40 °C IF(AV) 1.5 A * Peak forward surge current single half sinewave superimposed on rated load IFSM 50 30 A I2 t 10 A2sec TJ, TSTG - 55 to + 150 °C Rating for fusing (t < 8.3 ms) * Operating junction and storage temperature range Document Number 88531 03-Dec-04 www.vishay.com 1 KBP005M thru KBP10M, 3N246 thru 3N252 Vishay Semiconductors Electrical Characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Test condition Symbol KBP 005M KBP 01M KBP 02M KBP 04M KBP 06M KBP 08M KBP 10M 3N246 3N247 3N248 3N249 3N250 3N251 3N252 Unit * Maximum instantaneous forward voltage drop per leg at 1.0 A at 1.57 A VF 1.0 1.3 V * Maximum DC reverse current at rated DC blocking voltage per leg TA = 25 °C TA = 125 °C IR 5.0 500 µA Typical junction capacitance per leg at 4.0 V, 1 MHz CJ 15 pF Thermal Characteristics Ratings at 25 °C ambient temperature unless otherwise specified. Parameter Typical thermal resistance per Symbol KBP 005M KBP 01M KBP 02M KBP 04M KBP 06M KBP 08M KBP 10M 3N246 3N247 3N248 3N249 3N250 3N251 3N252 RθJA RθJL leg(1) 40 13 Unit °C/W Notes: (1) Thermal resistance from junction to ambient and from junction to lead mounted on P.C.B. with, 0.47 x 0.47" (12 x12 mm) copper pads. * JEDEC registered values Ratings and Characteristics Curves 60 1.6 60HZ Resistive or Inductive Load 1.4 1.2 P.C.B. Mounted with 0.47 x 0.47" (12 x 12 mm) Copper pads 1.0 0.8 0.6 Capacitive Load Ipk/IAV = 5.0 Ipk/IAV = 10 Ipk/IAV = 20 (per leg) 0.4 0.2 0 Single Half Sine-Wave (JEDEC Method) 50 TA = 25 °C 40 30 TJ = 150 °C 20 10 1.0 Cycle 0 20 40 60 80 100 120 140 150 Ambient Temperature ( °C) Figure 1. Derating Curve Output Rectified Current www.vishay.com 2 Peak Forward Surge Current (A) Bridge Output Full Wave Rectified Current, Average Amperes (TA = 25 °C unless otherwise noted) 1 10 100 Number of Cycles at 60 H Z Figure 2. Maximum Non-Repetitive Peak Forward Surge Current Per Leg Document Number 88531 03-Dec-04 KBP005M thru KBP10M, 3N246 thru 3N252 Vishay Semiconductors 100 TJ = 25 °C f = 1.0 MHZ Vsig = 50mVp-p 10 Junction Capacitance (pF) Instantaneous Forward Current (A) 20 TJ = 25 °C Pulse Width = 300 µs 1% Duty Cycle 1 0.1 0.01 0.4 0.6 0.8 1.0 1.2 1.4 10 1 0.1 1.6 1 10 100 Reverse Voltage (V) Instantaneous Forward Voltage (V) Figure 3. Typical Forward Characteristics Per Leg Figure 5. Typical Junction Capacitance Per Leg Instantaneous Reverse Current ( µA) 10 TJ = 125 °C TJ = 100 °C 1 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 Percent of Rated Peak Reverse Voltage (%) Figure 4. Typical Reverse Leakage Characteristics Per Leg Package outline dimensions in inches (millimeters) Case Style KBPM 0.125 x 45o (3.2) 0.600 (15.24) 0.560 (14.22) 0.460 (11.68) 0.500 (12.70) 0.420 (10.67) 0.460 (11.68) 60 (15.2) MIN. 0.034 (0.86) 0.028 (0.76) DIA. 0.200 (5.08) 0.180 (4.57) 0.50 (12.7) Min. 0.060 (1.52) 0.160 (4.1) 0.140 (3.6) 0.105 (2.67) 0.085 (2.16) Polarity shown on front side of case: positive lead by beveled corner Document Number 88531 03-Dec-04 www.vishay.com 3