ULN2003F12

ULN2003V12, ULN2003F12
Multi-Channel Relay and Inductive Load Sink Driver
Description
Pin Assignments
The ULN2003V12 and ULN2003F12 are multi-channel sink drivers
comprised of 7-channel and 4-channel output stages respectively.
The ULN2003V12 sink driver features 7 low output impedance drivers
that minimize on-chip power dissipation and an actual low power
upgrade version for popular ULN2003A family in real applications.
When driving a typical 12V relay coil, a ULN2003V12 will dissipate 12
times lower power compared to ULN2003A. ULN2003F12 is a lower
power variant benefiting from fewer channel integration and a better
fit for applications requiring only 4-channel drivers, such as driving
low voltage stepping motors, etc.
( Top View )
IN1 1
The ULN2003V12 and ULN2003F12 both support 3.3V to 5V CMOS
logic input interface, thus making it compatible to a wide range of
micro-controllers and other logic interfaces, and also feature an
improved input interface that minimizes the input DC current drawn
from the external drivers. The input RC snubber circuit integrated at
ULN2003V12 and ULN2003F12 improves the performance in noisy
operating conditions, and the internal pull-down resistor at input stage
helps allow input logic to be tri-stated.
IN2 2
IN3 3
16 OUT1
15 OUT2
14 OUT3
IN4 4
13 OUT4
IN5 5
12 OUT5
11 OUT6
10 OUT7
IN6 6
7
GND 8
COM
9
SO-16 / TSSOP-16
(Top View)
As shown in the Functional Diagram, each output of the ULN2003V12
and ULN2003F12 features an internal free-wheeling diode connected
in a common-cathode configuration at the COM pin which provides
flexibility of increasing current sink capability through combining
several adjacent channels in parallel. Under typical conditions the
ULN2003V12 can support up to 1.0A of load current when all 7channels are connected in parallel.
IN1
1
10
OUT1
IN2
2
9
OUT2
IN3
3
8
OUT3
IN4
4
7
OUT4
GND
5
6
COM
U-DFN3030-10
Features
Applications
•
•
•
•
•
•
•
•
•
•
•
•
•
•
4- and 7-Channel High Current Sink Drivers
Supports up to 20V Output Pull-up Voltage
Low Output VOL of 0.6V (Typical) with
•
100mA (Typ.) Current Sink per Channel at 3.3V Logic Input
•
140mA (Typ.) Current Sink per Channel at 5.0V Logic Input
Compatible to 3.3V and 5.0V Micro-Controllers and Logic
Interface
Internal Free-wheeling Diodes for Inductive Kick-back Protection
Input Pull-down Resistors Allows Tri-Stating the Input Driver
Input RC-Snubber to Eliminate Spurious Operation in Noisy
Environments
ESD: 4kV HBM, 1kV CDM
Available in 16-Pin SOIC, 16-Pin TSSOP and 10-Pin DFN3030
packages
Available in “Green” Molding Compound (No Br, Sb)
 Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2)
 Halogen and Antimony Free. “Green” Device (Note 3)
Notes:
Inputs Compatible with Popular Logic Types
Relay Driver Applications
Stepping Motor Applications
Logic Level Shifter
1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant.
2. See http://www.diodes.com for more information about Diodes Incorporated’s definitions of Halogen- and Antimony-free, "Green" and Lead-free.
3. Halogen- and Antimony-free "Green” products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and
<1000ppm antimony compounds.
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
1 of 8
www.diodes.com
February 2015
© Diodes Incorporated
ULN2003V12, ULN2003F12
Functional Diagram
IN1 1
16 OUT1
IN2 2
15 OUT2
IN3 3
14 OUT3
IN4 4
13 OUT4
IN5 5
12 OUT5
IN6 6
11 OUT6
IN7 7
IN1 1
10 OUT1
IN2 2
9
OUT2
IN3 3
8
OUT3
IN4 4
7
OUT4
5
COM
10 OUT7
9
COM
ULN2003F12
ULN2003V12
Pin Descriptions
Pin Name
Pin Number
Description
SO16
TSSOP16
DFN3030-10
IN1 ~ IN7
1~7
1~7
1~4
GND
8
8
5
Ground Reference Pin
COM
9
9
6
Internal Free-Wheeling Diode Common Cathode Pin
OUT7 ~ OUT1
10~16
10~16
7~10
Logic Input Pins IN1 through IN7
Channel Output Pins OUT7 through OUT1
Functional Block Diagram (Single Channel)
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
2 of 8
www.diodes.com
February 2015
© Diodes Incorporated
ULN2003V12, ULN2003F12
Absolute Maximum Ratings (@TA = +25°C, unless otherwise specified.)
Symbol
VIN
Rating
Parameter
Pin2 IN1~IN7 to GND Voltage
MIN
MAX
Unit
-0.3
5.5
V
VOUT
Pins OUT1~OUT7 to GND Voltage

20
V
VCOM
Pin COM to GND Voltage

20
V
Max GND-Pin Continuous Current (+100°C <TJ < +125°C)

700
mA
Max GND-Pin Continuous Current (TJ < +100°C)

1.0
A
IGND
PD
θJA
θJC
ESD
TJ
TSTG
Notes:
Total Device Power Dissipation at TA = +85°C
Thermal Resistance Junction-to-Ambient (Note 6)
Thermal Resistance Junction-to-Case (Note 7)
16 Pin – SOIC
16 Pin – TSSOP
TBD
TBD
W
W
10 Pin – DFN3030
TBD
W
16 Pin – SOIC
TBD
16 Pin – TSSOP
TBD
10 Pin – DFN3030
TBD
16 Pin – SOIC
16 Pin – TSSOP
TBD
TBD
10 Pin – DFN3030
TBD
°C/W
°C/W
HBM

4
kV
CDM

1
kV
Junction Temperature
-55
150
°C
Storage Temperature
-55
150
°C
4. Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only.
Functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied.
Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
5. All voltage values are with respect to the emitter/substrate terminal E, unless otherwise noted.
6. Maximum power dissipation is a function of TJ(max), θJA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is
PD = (TJ(max) – TA)/θJA. Operating at the absolute maximum TJ of +150°C can affect reliability.
7. Maximum power dissipation is a function of TJ(max), θJC, and TA. The maximum allowable power dissipation at any allowable ambient temperature is
PD = (TJ(max) – TC)/θJA. Operating at the absolute maximum TJ of +150°C can affect reliability.
Recommended Operating Conditions (@TA = +25°C, unless otherwise specified.)
Symbol
Parameter
VOUT
Channel Off-Stage Output Pull-Up Voltage
VCOM
COM Pin Voltage
IOUT(ON)
TJ
Per Channel Continuous Sink Current
Document number: DS37620 Rev. 1 - 2
TYP
Max
Unit


16
V
V


16
VINx = 3.3V


100(5)
VINx = 5.0V

-40

140(5)

125
Operating Junction Temperature
ULN2003V12, ULN2003F12
Min
3 of 8
www.diodes.com
mA
°C
February 2015
© Diodes Incorporated
ULN2003V12, ULN2003F12
Electrical Characteristics
(@TA = +25°C, unless otherwise specified.)
Specified over the recommended junction temperature range T J = -40°C to +125°C and over recommended operating conditions unless otherwise
noted. Typical values are at TJ = +25°C.
Parameter
INPUTS IN1 THROUGH IN7 PARAMETERS
Test conditions
Min
Typ.
Max
Unit
VI(on)
IN1~IN7 logic high input voltage
VCE = 2V, IC = 300mA
1.65


V
VI(OFF)
IN1~IN7 logic low input voltage
II = 250µA, IC = 100mA


0.6
V
II(ON)
IN1~IN7 ON state input current
IF = 350mA

12
25
uA
II(OFF)
IN1~IN7 OFF state input leakage


250
nA
VINX = 3.3V, IOUTX = 20mA

0.12
0.15
VINX = 3.3V, IOUTX = 100mA

0.6
0.75
VINX = 5.0V, IOUTX = 20mA

0.09
0.11
OUTPUTS OUT1 THROUGH OUT7 PARAMETERS
VOL(VCE-SAT)
IOUT(ON)
OUT1~OUT7 low-level output voltage
OUT1~OUT7 ON-state continuous current at
VOUTX = 0.6V
IOUT(ON)
OUT1~OUT7 OFF-state leakage current
SWITCHING PARAMETERS
tPHL
OUT1~OUT7 logic high propagation delay
tPLH
OUT1~OUT7 logic low propagation delay
tCHANNEL
Channel to channel delay
RPD
IN1~IN7 input pull-down resistance
ζ
IN1~IN7 input filter time constant
COUT
OUT1~OUT7 output capacitance
FREE-WHEELING DIODE PARAMETERS
VF
Forward voltage drop
IF-peak
Diode peak forward current
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
V
VINX = 5.0V, IOUTX = 140mA

0.6
0.75
VINX = 3.3V, VOUTX = 0.6V
80
100

VINX = 5.0V, VOUTX = 0.6V
95
140

VINX = 0V, VOUTX = VCOM =16V

0.5

uA

50
70
ns

121
140
ns
Over recommended operating conditions
and with same test conditions on
channels.

15
50
ns

210k
300k
390k
Ω
VINX = 3.3V, Vpull-up = 12V,
Rpull-up = 1kΩ
VINX = 3.3V, Vpull-up = 12V,
Rpull-up = 1kΩ
mA

VINX = 3.3V, VOUTX = 0.4V

9

ns

15

pF
IF-peak = 140mA, VF = VOUTx -VCOM

1.2

V

140

mA

4 of 8
www.diodes.com
February 2015
© Diodes Incorporated
ULN2003V12, ULN2003F12
Performance Characteristics
Output Current vs. Input Voltage (One Darlington)
Output Current vs. Input Voltage (All Darlingtons in Parallel)
400
2.0
ULN2003V12
ULN2003F12
350
1.5
Output Current (A)
300
Output Current (mA)
ULN2003V12
ULN2003F12
250
200
150
TA = 25 C
100
VOUT = 0.6 V
O
50
1.0
0.5
O
TA = 25 C
VOUT = 0.6 V
0.0
0
-50
0
1
2
3
4
5
6
-0.5
0
1
2
Input Voltage (V)
Output Current vs. Output Voltage
6
ULN2003F12
600
Output Current (mA)
Output Current (mA)
5
700
ULN2003V12
600
500
400
O
300
TA = 25 C
VIN = 3.3 V
200
VIN = 5.0 V
0.5
1.0
1.5
2.0
2.5
3.0
3.5
500
400
300
O
4.0
0
0.0
Output Voltage (V)
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
TA = 25 C
200
VIN = 3.3 V
VIN = 5.0 V
100
100
0
0.0
4
Output Current vs. Output Voltage
800
700
3
Input Voltage (V)
0.5
1.0
1.5
2.0
2.5
3.0
3.5
Output Voltage (V)
5 of 8
www.diodes.com
February 2015
© Diodes Incorporated
ULN2003V12, ULN2003F12
Performance Characteristics (Cont.)
Output Current vs. Output Voltage
Diode Forward Voltage vs. Diode Forward Current
2.5
1.4
O
O
TA = 25 C
VIN = 0 V
Diode Forward Voltage (V)
Output Current (A)
2.0
VCOM = VCC
1.5
1.0
0.5
0.0
0
TA = 25 C
1.2
4
8
12
16
20
1.0
0.8
0.6
0.4
0.2
0.0
0
Output Voltage (V)
25
50
75
100
125
150
175
200
Diode Forward Current (mA)
Diode Reverse Current vs. Diode Reverse Voltage
3.0
O
TA = 25 C
Diode Reverse Current (A)
2.5
2.0
1.5
1.0
0.5
0.0
-0.5
0
5
10
15
20
25
30
Diode Reverse Voltage (V)
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
6 of 8
www.diodes.com
February 2015
© Diodes Incorporated
ULN2003V12, ULN2003F12
Ordering Information
ULN2003 XXX XXX - X
Device
Device
Package
Packing
V12 : 7 Channels
F12 : 4 Channels
S16 : SO-16
T16 : TSSOP-16
FN : U-DFN3030-10
7/13 : Tape & Reel
Package Code
Packaging
(Note 11)
S16
T16
FN
SO-16
TSSOP-16
DFN3030-10
ULN2003V12S16-13
ULN2003V12T16-13
ULN2003F12FN-7
Note:
7”/13” Tape and Reel
Part Number Suffix
Quantity
2,500/Tape & Reel
2,500/Tape & Reel
3,000/Tape & Reel
-13
-13
-7
8. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at
http://www.diodes.com/datasheets/ap02001.pdf.
Marking Information
(1) SO-16 and TSSOP-16
( Top View )
16
9
YY : Year : 08, 09,10~
WW : Week : 01~52; 52
represents 52 and 53 week
XX : Internal Code
Logo
Part Number
ULN2003XXX
YY WW X X
Device:
V12 : 7 Channels
F12 : 4 Channels
1
8
(2) DFN3030-10
( Top View )
XX
YW X
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
XX : Identification Code
Y : Year : 0~9
W : Week : A~Z : 1~26 week;
a~z : 27~52 week; z represents
52 and 53 week
X : Internal Code
Part Number
Package
Identification Code
ULN2003F12FN-7
DFN3030-10
A3
7 of 8
www.diodes.com
February 2015
© Diodes Incorporated
ULN2003V12, ULN2003F12
IMPORTANT NOTICE
DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT,
INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
(AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION).
Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes
without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the
application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or
trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume
all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated
website, harmless against all damages.
Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel.
Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and
hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or
indirectly, any claim of personal injury or death associated with such unintended or unauthorized application.
Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings
noted herein may also be covered by one or more United States, international or foreign trademarks.
This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the
final and determinative format released by Diodes Incorporated.
LIFE SUPPORT
Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express
written approval of the Chief Executive Officer of Diodes Incorporated. As used herein:
A. Life support devices or systems are devices or systems which:
1. are intended to implant into the body, or
2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the
labeling can be reasonably expected to result in significant injury to the user.
B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the
failure of the life support device or to affect its safety or effectiveness.
Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and
acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any
use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related
information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its
representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems.
Copyright © 2015, Diodes Incorporated
www.diodes.com
ULN2003V12, ULN2003F12
Document number: DS37620 Rev. 1 - 2
8 of 8
www.diodes.com
February 2015
© Diodes Incorporated