Features at a Glance General Purpose HP Range Efficiency 3-Phase 60 Hz Bearings Fan Warranty Hazardous Classification 1) Verticals S SD100 IEEE 841 1-400 143T-S449 XP100 XP100 ID1 SD10 MS RGZVESD Frame Size SD100 1-400 143T-S449 1-200HP 143T-449T 1-200HP 143T-449T 1-200HP 143T-449T 1-250HP 143HP-449HP RGZVILESD 3-250HP 182LP-449LP Epact NEMA Premium® Plus NEMA Premium® 208 - 230 460 V 230 460 V 460 V 575 V – 143T-256T 143T-256T 1-20HP – – 1-20HP – 143T-256T 143T-449T 1-20HP 15-75HP 100-200HP 1-200HP – 143T-256T 143T-S449 1-20HP – 15-400HP 1-400HP – 143T-256T 143T-S449 – – – 1-400HP – – 143T-449T 1-20HP 10-100HP 125-300HP 1-300HP – – 143T-449T 1-20HP 10-100HP 125-300HP 1-300HP 143T-449T – – – – – 1-200HP 143HP-449HP – – – 1-20HP 25-250HP 1-250HP 182LP-449LP – – – 3-20HP 25-250HP 3-250HP Frame Stator Rotor, die cast copper Rotor die cast aluminum rotor 8 hole feet NEMA MG1 Part 31 1.15 Class B @ 1.0SF Class F @ 1.15SF Die Cast Aluminum Copper - Random wound 143T-256T 143T-256T Bolt-on NEMA MG1 Part 31 1.15 Class B @ 1.0SF Class F @ 1.15SF Cast iron Copper - Random wound 143T-256T 143T-449T Casted (4 holes: 250T-280T, NEMA MG1 Part 31 1.15 Class B @ 1.0SF Class F @ 1.15SF Cast iron Copper - Random wound 143T-256T 143T-S449 Casted (4 holes: 250T-280T, NEMA MG1 Part 31 1.15 Class B @ 1.0SF Class F @ 1.15SF Cast iron Copper - Random wound 143T-256T 143T-S449 Casted (4 holes: 250T-280T, NEMA MG1 Part 31 1.15 4) Class B @ 1.0SF – Cast iron Copper - Random wound – 143T-449T Casted NEMA MG1 Part 31 1.15 Class B @ 1.0SF Class F @ 1.15SF Cast iron Copper - Random wound – 143T-449T Casted NEMA MG1 Part 31 1.0 Class B @ 1.0SF Class F @ 1.15SF Cast iron Copper - Random wound – 143T-449T Casted (4 holes: 250T-280T, NEMA MG1 Part 31 1.15 Class B @ 1.0SF Class F @ 1.15SF Cast iron Copper - Random wound – 143HP-449HP – NEMA MG1 Part 31 1.15 Class B @ 1.0SF Class F @ 1.15SF Cast iron Copper - Random wound Condensation drains High strength carbon steel shaft V ring slinger - IP54 Inpro Seal® Bearing Isolator - IP55 Drain holes - lowest point (2) C1045 DE only – Drain holes - lowest point (2) C1045 DE Only – T-drains - lowest point (2) C1045 DE & NDE 2) 143T-S449T T-drains - lowest point (2) C1045 DE & NDE – UL Approved 284-449T C1045 DE & NDE – UL Approved 284-449T C1045 DE & NDE – T-drains -lowest point (2) C1045 DE & NDE – T-drain C1045 DE & NDE – T-drain C1045 DE & NDE – Die cast aluminum Steel Cast Iron O-ring Neoprene gasket Seal leads 143T-256T – – 143T-256T – – 143T-256T 284T-449T 143T-256T 284T-449T – – – 143T-S449 – 143T-S449 – – – 143T-S449 – 143T-S449 – – – 143T-449T – 143T-449T – – – 143T-449T – – 143T-449T – – 143T-449T – 143T-449T – – – 143HP-449HP – 143T-449HP – – – 182LP-449LP – 182T-449LP – Double shielded Single shielded 143T-256T – 143T-449T – 143T-256T 284T-S449 S449 143T-S449T 143T-449T – 143T-449T – 143T-256T 284T-449T Open Duplex (angular contact) Bearing hoursing bearing cap Grease Inlet relief fittings – – Aluminum no Polyurea base – – – Cast Iron no Polyurea base Alemite plug - FS440 (only) – – Cast iron 143T-S449 Polyurea base Alemite plug – – Cast iron 143T-S449 Polyurea base Alemite pressure (auto) – – Cast iron 143T-449T Polyurea base Alemite plug 284T-449T (DE) – 182LP-254LP (DE) – Cast iron 143T-449T Polyurea base Alemite plug – Cast iron 143T-449T Polyurea base Alemite plug 284T-365T, 440T(DE), 440T (NDE) 404T-405T (DE & NDE) 143T-254T & 440T (DE) & 284T-365T (NDE) – Cast iron 143T-449T Polyurea base Alemite plug Cover - Plastic Metal Cast Iron Bidirectional 143T-256T – – Polypropylene - 143T-256T Uni-directional – 143T-256T 284T-449T – Polypropylene - 143T-449T – – – – 143T-S449 Polypropylene -143T-449T Bronze S449 2 pole - 350-400 HP – – 143T-S449 Polypropylene -143T-449T 4 Pole - 300HP 2 & 4 Pole 350-400HP – – 143T-449T Polypropylene - 143T-449T – – – – 143T-449T Polypropylene - 143T-449T – – – – 143HP-449T Polypropylene - 143T-449T – – – – 143HP-449HP Polypropylene - 143T-449T – – – – 182LP-449LP Polypropylene - 182T-449T – – Nameplate Lifting eyebolt Paint Rust resistant Aluminum anodized engraved Cast in Alkyd -RAL7030 Rust resistant Aluminum anodized engraved Included above 75 Lbs Alkyd - RAL7030 Rust resistant Stainless steel engraved Included above 75 Lbs Alkyd -RAL7030 Rust resistant Stainless steel embossed Included Alkyd -RAL7030 Rust resistant Stainless steel engraved Included above 75 Lbs Alkyd - RAL7030 Rust resistant Stainless steel engraved Included above 75 Lbs Alkyd - RAL7030 Rust resistant Stainless steel engraved Included above 75 Lbs Alkyd - RAL7030 Rust resistant Stainless steel engraved – Alkyd - RAL7030 Rust resistant Stainless steel engraved – Alkyd -RAL7030 Variable torque 20:1 Constant torque 20:1 Constant torque 10:1 Constant torque 4:1 143T-256T – Copper Rotor 143T-256T Alum Rotor 143T-256T 18 months – – Copper Rotor 143T-256T Alum Rotor 143T-449T 18 months 143T-S449 4-Pole 143T-365T (Alum & Copper rotor) Copper Rotor 143T-256T (2, 6 & 8 Poles) Alum rotor 143T-449T 36 months 143T-S449 4-Pole 143T-365T (Alum & Copper rotor) Copper Rotor 143T-256T (2, 6 & 8 Poles) Alum rotor 143T-449T 60 months 143T-449T – – 143T-326T (Up a frame 364-447) 36 months 143T-449T – – 143T-326T (Up a frame 364-447) 36 months 143T-449T – – 143T-449T 36 months 143HP-449HP – – 143HP-449HP 36 months 182LP-449LP – – 182LP-449LP 36 months Service factor 1.0 – – 2) CSA-143-S449 (@ 40˚C) Class I, Division 2, T3 temperature code 2) CSA-143-S449 (@ 40˚C) Class I, Division 2, T3 temperature code – – – – Service factor 1.15 – – – – UL - 143T-326T (@ 55ºC) Class I, Group C&D Class II Groups F&G Division 1 T3C - temperature code UL - 143T-449T 4) (@ 40˚C) Class I, Group C&D Class II Groups F&G Division 1 T3C - temperature code UL - 143T-449T (Up to 60ºC) Class I, Group D, Division 1 T2A -T2D Temperature code 5) – – – Hardware Inverter Duty Multi speed GP100 1-200HP 143T-449T Service Factor (@ 40ºC) Temperature rise (Sine wave) Conduit box oversize) Explosion Proof GP100A 1-20 HP 143T-256T NEMA Design B 3) Insulation Class F Frame Severe Duty Available as an option frames 284T-405T as option, (Constant torque limited to 4:1) design A: 250HP and 300HP, 4 and 6 pole 2) Available 3) NEMA Subject to change without prior notice. Order No: NMCM-01000-0813 All rights reserved. Printed in USA ©2013 Siemens Industry, Inc. 2 and 8 poles) 1) 2 and 8 poles) 1.0 S.F. for 449T higher ratings: 300HP 2 &4 Pole , 250HP 6 Pole, 200HP 8 Pole. on request. NEMA Premium® is a certification mark of the National Electrical Manufacturers Association. 2 and 8 poles) 2 and 8 poles) 4) 5) Available usa.siemens.com/nemamotors SIMOTICS NEMA Motors 182LP-449LP – 182LP-254LP (NDE) Cast iron 143T-449T Polyurea base Alemite plug