DBA20G 2.0A Single-Phase Bridge Rectifier www.onsemi.com Features Plastic molded structure Glass passivation for high reliability Peak reverse voltage: VRM=600V Average rectified current: IO=2.0A PIN ASSIGNMENT SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS at Ta = 25°C (Note 1) Parameter Peak Reverse Voltage Average Rectified Current Ta = 40°C Surge Forward Current 50Hz sine wave, 1cycle Junction Temperature Symbol Value Unit VRM 600 V IO 2.0 A IFSM 40 A 150 C Tj Storage Temperature Tstg 30 to 150 C Note 1 : Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. MARKING ORDERING INFORMATION See detailed ordering and shipping information on page 4 of this data sheet © Semiconductor Components Industries, LLC, 2016 February 2016 - Rev. 0 1 Publication Order Number : DBA20G/D DBA20G ELECTRICAL CHARACTERISTICS at Ta = 25°C (Note 2) Parameter Forward Voltage Symbol VF Value Conditions min typ Unit max IF = 1.0A 1.05 V IR VR : At each VRM Reverse Current 10 µA Note 2 : Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. Note 3 : Mounting torque : 0.49N·m max. 10 7 5 3 2 1.0 7 5 3 2 0.1 0 www.onsemi.com 2 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 DBA20G PACKAGE DIMENSIONS unit : mm GBPC-W 12.5x12.5 / DBA20 1 : G www.onsemi.com 3 DBA20G ORDERING INFORMATION Device DBA20G Marking Package BA20G GBPC-W 12.5x12.5 / DBA20 Pb-Free) Shipping 100pcs / Tray 1,000pcs / Box ON Semiconductor and the ON logo are registered trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. SCILLC owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf . SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. www.onsemi.com 4