MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS MICRODE CASE 193−04 ISSUE L DATE 22 SEP 2003 NOTES: 1. CASE 193−03 OBSOLETE, NEW STANDARD 193−04. SCALE 1:1 DIM A B D F M MILLIMETERS MIN MAX 8.43 8.69 4.19 4.45 5.54 5.64 5.94 6.25 5 NOM INCHES MIN MAX 0.332 0.342 0.165 0.175 0.218 0.222 0.234 0.246 5 NOM A GENERIC MARKING DIAGRAM* M D DEV AYYWW B F DEV A YY WW = Specific Device Code = Assembly Location = Year = Work Week *This information is generic. Please refer to device data sheet for actual part marking. DOCUMENT NUMBER: STATUS: 98ASB42125B ON SEMICONDUCTOR STANDARD NEW STANDARD: Semiconductor Components Industries, LLC, 2002 October, DESCRIPTION: 2002 − Rev. 0 http://onsemi.com CASE 193−04, MICRODE 1 Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. Case Outline Number: PAGE 1 OFXXX 2 DOCUMENT NUMBER: 98ASB42125B PAGE 2 OF 2 ISSUE L REVISION OBSOLETING CASES NO LONGER IN PRODUCTION. NAME CLARIFICATION. REQ. BY G. MCCARTHY DATE 22 SEP 2003 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. Semiconductor Components Industries, LLC, 2003 September, 2003 − Rev. 04L Case Outline Number: 193