SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) SIDACtor® Multiport Series - MS-013 Description SIDACtor® Multiport Series MS-013 are designed to protect baseband equipment from overvoltage transients. Targeted for voice through DS-1 applications, the series provides a dual port surface mount solution that enables equipment to comply with various global regulatory standards. Features and Benefits t Low voltage overshoot t Low on-state voltage Agency Approvals Agency t Fails short circuit when surged in excess of ratings t Does not degrade with use Agency File Number t Low Capacitance t Replaces four discrete components E133083 Pinout Designation Applicable Global Standards 1 6 2 5 3 4 t TIA-968-A t GR 1089 Intra-building t TIA-968-B t IEC 61000-4-5 t ITU K.20/21 Enhanced Level* t YD/T 1082 t ITU K.20/21 Basic Level t YD/T 950 t YD/T 993 t GR 1089 Inter-building* Schematic Symbol (T1) 1 6 (T2) (G1) 2 5 (G2) (R1) 3 4 (R2) *A-rated parts require series resistance Electrical Characteristics Part Number Marking VDRM @lDRM=5μA VS @100V/μs VDRM @lDRM=5μA VS @100V/μs VT @IT=2.2 Amps V min V max V min V max V max Pins 1-2, 3-2, 4-5, 6-5 P0084UALxx P0304UALxx P0644UALxx P0724UALxx P0904UALxx P1104UALxx P1304UALxx P1504UALxx P0084UA P0304UA P0644UA P0724UA P0904UA P1104UA P1304UA P1504UA 6 25 58 65 75 90 120 140 25 40 77 88 98 130 160 180 Pins 1-3, 4-6 12 50 116 130 150 180 240 280 50 80 154 176 196 260 320 360 Pins 1-2, 3-2, 4-5, 6-5 4 4 4 4 4 4 4 4 IH IS IT Capacitance mA min mA max A max 50 50 150 150 150 150 150 150 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 See Capacitance Values Table 2.2 Table continues on next page. © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 143 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Electrical Characteristics (continued) Part Number Marking VDRM @lDRM=5μA VS @100V/μs VDRM @lDRM=5μA VS @100V/μs VT @IT=2.2 Amps V min V max V min V max V max Pins 1-2, 3-2, 4-5, 6-5 P1804UALxx P2304UALxx P2604UALxx P3104UALxx P3504UALxx P0084UCLxx P0304UCLxx P0644UCLxx P0724UCLxx P0904UCLxx P1104UCLxx P1304UCLxx P1504UCLxx P1804UCLxx P2304UCLxx P2604UCLxx P3104UCLxx P3504UCLxx P1804UA P2304UA P2604UA P3104UA P3504UA P0084UC P0304UC P0644UC P0724UC P0904UC P1104UC P1304UC P1504UC P1804UC P2304UC P2604UC P3104UC P3504UC 170 190 220 275 320 6 25 58 65 75 90 120 140 170 190 220 275 320 Pins 1-3, 4-6 220 260 300 350 400 25 40 77 88 98 130 160 180 220 260 300 350 400 340 380 440 550 640 12 50 116 130 150 180 240 280 340 380 440 550 640 440 520 600 700 800 50 80 154 176 196 260 320 360 440 520 600 700 800 Notes: - Absolute maximum ratings measured at TA$VOMFTTPUIFSXJTFOPUFE - Devices are bi-directional - XX = Part Number Suffix: ‘TP’ (Tube Pack) or ‘RP’ (Reel Pack). Capacitance Values Part Number P0084UALxx P0304UALxx P0644UALxx P0724UALxx P0904UALxx P1104UALxx P1304UALxx P1504UALxx P1804UALxx P2304UALxx P2604UALxx P3104UALxx P3504UALxx P0084UCLxx P0304UCLxx P0644UCLxx P0724UCLxx P0904UCLxx P1104UCLxx P1304UCLxx P1504UCLxx P1804UCLxx P2604UCLxx P3104UCLxx P3504UCLxx Pin 1-2 / 3-2 (4-5 / 6-5) Tip-Ground, Ring-Ground pF min 25 15 40 35 35 30 25 25 25 25 20 20 20 35 25 55 50 45 45 40 35 35 30 30 25 pF max 155 140 60 60 55 50 45 40 35 35 35 35 35 285 250 155 145 135 115 105 95 90 85 80 75 © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Pin 1-3 (4-6) Tip-Ring pF min 15 10 20 20 20 15 15 15 10 10 10 10 10 20 10 30 25 25 25 20 20 15 15 15 15 pF max 90 90 35 35 30 30 25 25 20 20 20 20 20 165 145 90 85 80 65 60 55 50 50 45 45 144 Revised: February 22, 2011 Pins 1-2, 3-2, 4-5, 6-5 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 4 IH IS IT Capacitance mA min mA max A max 150 150 150 150 150 50 50 150 150 150 150 150 150 150 150 150 150 150 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 2.2 See Capacitance Values Table SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Surge Ratings Series IPP ITSM 0.2x310 0.5x700 2 2x10 2x10 2 8x20 1.2x50 2 10x160 10x160 2 10x560 1 10x560 2 5x320 1 9x720 2 10x360 1 10x360 2 10x1000 1 10x1000 2 5x310 1 10x700 2 50/60 Hz 1 1 1 1 di/dt A min A min A min A min A min A min A min A min A min A min A/μs max A 20 150 150 90 50 75 75 45 75 20 500 C 50 500 400 200 150 200 175 100 200 30 500 Notes: - Peak pulse current rating (IPP) is repetitive and guaranteed for the life of the product. - IPPSBUJOHTBQQMJDBCMFPWFSUFNQFSBUVSFSBOHFPG$UP$ - The device must initially be in thermal equilibrium with -40°C < TJ <¡$ 1 Current waveform in μs 2 Voltage waveform in μs Thermal Considerations Package Symbol Parameter Value Unit TJ Operating Junction Temperature Range UP °C TS Storage Temperature Range UP °C R0JA Thermal Resistance: Junction to Ambient 60 °C/W Modified MS-013 6 5 4 1 2 3 V-I Characteristics tr x td Pulse Waveform IPP – Peak Pulse Current – %IPP +I IT IS IH IDRM -V +V VT VDRM VS tr = rise time to peak value td = decay time to half value Peak Value 100 Waveform = tr x td 50 Half Value 0 0 td tr t – Time (μs) -I Normalized VS Change vs. Junction Temperature Normalized DC Holding Current vs. Case Temperature 8 6 25 °C 4 IH (TC = 25ºC) IH 10 Ratio of Percent of VS Change – % 2.0 14 12 2 0 -4 -6 -8 -40 -20 0 1.6 1.4 25°C 1.2 1.0 0.8 0.6 0.4 20 40 60 80 100 120 140 160 -40 Junction Temperature (TJ) – °C © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. 1.8 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) - ºC 145 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Soldering Parameters Pb-Free assembly (see Fig. 1) ¡$ ¡$ 60-180 secs. - Temperature Min (Ts(min)) Pre Heat - Temperature Max (Ts(max)) - Time (Min to Max) (ts) Average ramp up rate (Liquidus Temp (TL) to peak) 3°C/sec. Max. TS(max) to TL - Ramp-up Rate 3°C/sec. Max. Reflow - Temperature (TL) (Liquidus) ¡$ - Temperature (tL) 60-150 secs. Peak Temp (TP) ¡$ Time within 5°C of actual Peak Temp (tp) 30 secs. Max. Ramp-down Rate 6°C/sec. Max. Time 25°C to Peak Temp (TP) 8 min. Max. Do not exceed ¡$ Figure 1 TP tP Critical Zone TL to TP Ramp-up Temperature Reflow Condition TL TS(max) tL Ramp-down Preheat TS(min) tS 25 time to peak temperature (t 25ºC to peak) Time Physical Specifications Environmental Specifications Lead Material Copper Alloy High Temp Voltage Blocking 80% Rated VDRM (VAC Peak ¡$PS¡$ 504 or 1008 hrs. MIL-STD-750 (Method 1040) JEDEC, JESD22-A-101 Terminal Finish 100% Matte-Tin Plated Temp Cycling ¡$UP¡$NJOEXFMMVQUP cycles. MIL-STD-750 (Method 1051) EIA/JEDEC, JESD22-A104 Biased Temp & Humidity 52 VDC¡$ 3)VQUPIST&*" JEDEC, JESD22-A-101 High Temp Storage ¡$IST.*-45%.FUIPE JEDEC, JESD22-A-101 Low Temp Storage -65°C, 1008 hrs. Thermal Shock ¡$UP¡$NJOEXFMMTFDUSBOTGFS 10 cycles. MIL-STD-750 (Method 1056) JEDEC, JESD22-A-106 Autoclave (Pressure Cooker Test) ¡$3)BUNVQUPIST&*" JEDEC, JESD22-A-102 Resistance to Solder Heat ¡$TFDT.*-45%.FUIPE Moisture Sensitivity Level 3)¡$ISTSFnPXDZDMFT ¡$1FBL +&%&$+45%-FWFM UL recognized epoxy meeting flammability classification 94V-0 Body Material Part Numbering Part Marking P xxx 4 U x L xx TYPE P = SIDACtor MEDIAN VOLTAGE CONSTRUCTION VARIABLE PACKING OPTIONS XXXXXXX RoHS COMPLIANT Date Code XXXXX IPP RATING PACKAGE TYPE © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. Part Marking Code (Refer to Electrical Characteristics Table) 146 Revised: February 22, 2011 SIDACtor ® Protection Thyristors Baseband Protection (Voice-DS1) Dimensions — MS-013 Dimensions 0.065 (1.65) Pad Outline C A B C D E F G H J K BSC* 0.460 (11.68) 0.138 (3.50) Dimension are in inches (and millimeters). 0.059 (1.50) E D 7º TYP J 7º TYP A G Burr Side H 96º A Mold Split Line 4º A 7º TYP BSC* F MIN Length of Flat 7º TYP Detail A K B Inches Min Max Min Max 0.360 0.352 0.400 0.043 0.047 0.293 0.289 0.089 0.041 0.020 0.133 0.364 0.356 0.412 0.045 0.055 0.297 0.293 0.093 0.049 --0.143 9.14 8.94 10.16 1.09 1.19 7.44 7.34 2.26 1.04 0.51 3.38 9.25 9.04 10.46 1.13 1.40 7.54 7.44 2.36 1.24 --3.63 * BSC = Basic Spacing between Centers Packing Options Package Type U Description Quantity Added Suffix Industry Standard Modified MS-013 6-pin Tape and Reel Pack 1500 RP EIA-481-D Modified MS-013 6-pin Tube Pack 500 (50 per tube) TP N/A Tape and Reel Specification — MS-013 .157 (4.0) .630 (16.0) .472 (12.0) 12.99 (330) .512 (13.0) Arbor Hole Dia. Dimensions are in inches (and millimeters) 0.700 (17.8) Direction of Feed Tube Pack Specification — MS-013 Message Location .045 (1.14) .310 (7.87) 90˚ .165 (4.19) 6 Interior of the Tube .150 (3.81) .225 (5.72) .525 (13.34) © 2011 Littelfuse, Inc. Specifications are subject to change without notice. Please refer to www.littelfuse.com for current information. .020 ± .005 WALL TYP. (0.51 ± 0.13) .108 (2.74) .005 A .110 (2.79) A Dimensions are in inches (and millimeters) 147 Revised: February 22, 2011 Millimeters 20.000 ± .030 (508.00 ± 0.76)