AT73C239 Summary - Mature

Features
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Main Supply 3.0V to 3.6V
Independent 2.5V to 3.6V Auxiliary Supply for Backup Section
Internal State Machine for Startup
25 mA/1.8V-2.75V Linear Low Drop Out Regulator with High PSRR and Low Noise
(LDO1)
30 mA/1.5V-1.8V Linear Low Drop Out Regulator with High PSRR and Low Noise
(LDO2)
60 mA/1.23V-1.5V-1.8V Linear Low Drop Out Regulator with High PSRR (LDO3)
2 mA/1.2V-1.5V-1.8V Linear Low Drop Out Regulator with Very Low Quiescent Current
(LDO4)
HPBG Economic High Performance Voltage Reference for LDO Supply to RF Sections
LPBG Low Power Voltage Reference to LDO4 During Backup Battery Operation
Internal Oscillator Generates Internal Master Clock
Internal Reset Generator for Main Supply
Additional External Reset Input
Two Wire Interface (TWI) for Independent Activation and Output Voltage Programming
for Each LDO
Available in 3 x 3 x 0.9 mm 16-pin QFN Package
Applications: GPS Modules, WLAN Devices, Wireless Modules
1. Description
The AT73C239 is a 4-channel Power Supply Power Management Unit (PMU) available in a QFN 3 x 3 mm package. It is a fully integrated, low cost, combined Power
Management device for wireless modules, GPS and WLAN devices. It integrates four
Linear Low Drop Out (LDO) Regulators, three of which provide high-accuracy RF performance and one (LDO4) with very low quiescent current that is supplied by an
external backup battery. A Low Power Bandgap (LPBG) requiring no external capacitor for decoupling, is used as reference voltage for LDO4 and starts when VBAT is
present. LDO4 regulates output voltage with extremely low quiescent current, maximizing the lifetime of the backup battery. An Internal State Machine manages the
startup of the other LDOs in the order of LDO3 then LDO1 then LDO2. An economic
High Power Bandgap (HPBG) provides highly accurate, low noise voltage reference
to LDOs 1, 2, 3. HPBG operates in switching mode thereby decreasing its current consumption and becomes inactive when not directly supplied by VIN current. When the
RF LDOs are in idle mode, quiescent current is decreased to a minimum.
Power
Management for
Mobiles (PM)
AT73C239
4-channel Power
Management for
Wireless
Modules
Summary
The AT73C239 features a Two-wire Interface (TWI) to increase the efficiency of the
system by disabling LDOs when not needed.
6201AS–PMAAC–24-Oct-05
2. Block Diagram
Figure 2-1.
AT73C239 Functional Block Diagram
LDO1
VBG
HPBG
VDD1
VDD
3.0V-3.6V
VOUT
1.8V or 2.75V
GNDA/AVSS
ILOAD 25 mA
VO1
Internal Oscillator
XRESIN
LDO2
XRESO
Reset Generator
TWCK
TWI
TWD
State Machine
GNDD
VDD
3.0V-3.6V
VOUT
1.5V or 1.8V
ILOAD 30 mA
Fuse1
VDD2
VO2
Fuse2
VZAP
VMON
POR1
VBAT
VO4
POR1
VDD3
LDO4
LDO3
VDD
2.5V-3.6V
VDD
3.0V-3.6V
VOUT
1.2V or 1.5V or 1.8V
VOUT
1.23V or 1.5V or 1.8V
ILOAD 2 mA
ILOAD 60 mA
VO3
LPBG
2
AT73C239 Summary
6201AS–PMAAC–24-Oct-05
AT73C239 Summary
Revision History
Doc. Rev
Date
Comments
6201AS
01-Sep-05
First issue
Change Request Ref.
3
6201AS–PMAAC–24-Oct-05
Atmel Corporation
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 487-2600
Regional Headquarters
Europe
Atmel Sarl
Route des Arsenaux 41
Case Postale 80
CH-1705 Fribourg
Switzerland
Tel: (41) 26-426-5555
Fax: (41) 26-426-5500
Asia
Room 1219
Chinachem Golden Plaza
77 Mody Road Tsimshatsui
East Kowloon
Hong Kong
Tel: (852) 2721-9778
Fax: (852) 2722-1369
Japan
9F, Tonetsu Shinkawa Bldg.
1-24-8 Shinkawa
Chuo-ku, Tokyo 104-0033
Japan
Tel: (81) 3-3523-3551
Fax: (81) 3-3523-7581
Atmel Operations
Memory
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
RF/Automotive
Theresienstrasse 2
Postfach 3535
74025 Heilbronn, Germany
Tel: (49) 71-31-67-0
Fax: (49) 71-31-67-2340
Microcontrollers
2325 Orchard Parkway
San Jose, CA 95131, USA
Tel: 1(408) 441-0311
Fax: 1(408) 436-4314
La Chantrerie
BP 70602
44306 Nantes Cedex 3, France
Tel: (33) 2-40-18-18-18
Fax: (33) 2-40-18-19-60
ASIC/ASSP/Smart Cards
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Biometrics/Imaging/Hi-Rel MPU/
High Speed Converters/RF Datacom
Avenue de Rochepleine
BP 123
38521 Saint-Egreve Cedex, France
Tel: (33) 4-76-58-30-00
Fax: (33) 4-76-58-34-80
Zone Industrielle
13106 Rousset Cedex, France
Tel: (33) 4-42-53-60-00
Fax: (33) 4-42-53-60-01
1150 East Cheyenne Mtn. Blvd.
Colorado Springs, CO 80906, USA
Tel: 1(719) 576-3300
Fax: 1(719) 540-1759
Scottish Enterprise Technology Park
Maxwell Building
East Kilbride G75 0QR, Scotland
Tel: (44) 1355-803-000
Fax: (44) 1355-242-743
Literature Requests
www.atmel.com/literature
Disclaimer: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any
intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN ATMEL’S TERMS AND CONDITIONS OF SALE LOCATED ON ATMEL’S WEB SITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY
WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR
PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT
OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no
representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications
and product descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided
otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel’s products are not intended, authorized, or warranted for use
as components in applications intended to support or sustain life.
© Atmel Corporation 2005. All rights reserved. Atmel®, logo and combinations thereof, Everywhere You Are ® and others, are registered trademarks or trademarks of Atmel Corporation or its subsidiaries. Other terms and product names may be trademarks of others.
Printed on recycled paper.
6201AS–PMAAC–24-Oct-05