Balanced Three-chip SIDACtor® Device RoHS 6 2 5 3 4 This six-pin SMT package offers a guaranteed balanced protection, based on a Littelfuse patent (US Patent 4,905,119). The ‘Y’ configuration offers identical metallic and longitudinal protection all in one package. SIDACtor devices enable equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68). SIDACtor Devices 1 Electrical Parameters Part Number * VDRM Volts VS Volts VDRM Volts Pins 1-3, 1-4 VS Volts Pins 3-4 VT Volts IDRM µAmps IS mAmps IT Amps IH mAmps 150 P1553U_L 130 180 130 180 8 5 800 2.2 P1803U_L 150 210 150 210 8 5 800 2.2 150 P2103U_L 170 250 170 250 8 5 800 2.2 150 P2353U_L 200 270 200 270 8 5 800 2.2 150 P2703U_L 230 300 230 300 8 5 800 2.2 150 P3203U_L 270 350 270 350 8 5 800 2.2 150 P3403U_L 300 400 300 400 8 5 800 2.2 150 P5103U_L 420 600 420 600 8 5 800 2.2 150 VDRM Volts VS Volts VDRM Volts VS Volts VT Volts IDRM µAmps IS mAmps IT Amps IH mAmps Part Number * Pins 1-3, 1-4 Pins 3-4 A2106U_3L ** 170 250 50 80 8 5 800 2.2 120 A5030U_3L ** 400 550 270 340 8 5 800 2.2 120 * “L” in part number indicates RoHS compliance. For non-RoHS compliant device, delete “L” from part number. For individual “UA”, “UB”, and “UC” surge ratings, see table below. ** Asymmetrical General Notes: • All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range. • IPP is a repetitive surge rating and is guaranteed for the life of the product. • Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities. • VDRM is measured at IDRM. • VS is measured at 100 V/µs. • Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request. • Device is designed to meet balance requirements of GTS 8700 and GR 974. Surge Ratings in Amps Series IPP 0.2x310 * 2x10 * 8x20 * 0.5x700 ** 2x10 ** 1.2x50 ** 10x160 * 10x160 ** 10x560 * 10x560 ** 5x320 * 9x720 ** Amps Amps Amps Amps Amps Amps A 20 150 150 90 50 B 25 250 250 150 100 C 50 500 400 200 150 200 10x360 * 10x1000 * 5x310 * ITSM 10x360 ** 10x1000 ** 10x700 ** 50 / 60 Hz Amps Amps 75 75 100 125 175 di/dt Amps Amps Amps/µs 45 75 20 500 80 100 30 500 100 200 50 500 * Current waveform in µs ** Voltage waveform in µs Telecom Design Guide • © 2006 Littelfuse 3 - 31 www.littelfuse.com Balanced Three-chip SIDACtor® Device Thermal Considerations Package Symbol Modified MS-013 TJ Operating Junction Temperature Range -40 to +125 °C TS Storage Temperature Range -65 to +150 °C 60 °C/W 6 5 4 Parameter Value Thermal Resistance: Junction to Ambient RθJA Unit 1 2 3 Capacitance Values pF Pin 3-4 Tip-Ring Part Number pF Pin 1-3 (4-6) Tip-Ground, Ring-Ground MIN MAX MIN MAX P1553UAL 10 95 10 60 P1553UBL 25 95 15 60 P1553UCL 30 95 20 60 P1803UAL 20 85 10 55 P1803UBL 25 85 15 55 P1803UCL 30 85 15 55 P2103UAL 15 85 10 55 P2103UBL 20 85 10 55 P2103UCL 30 85 15 55 P2353UAL 15 75 10 50 P2353UBL 20 75 10 50 P2353UCL 25 75 15 50 P2703UAL 15 75 10 50 P2703UBL 20 75 10 50 P2703UCL 25 75 15 50 P3203UAL 15 70 10 45 P3203UBL 20 70 10 45 P3203UCL 45 70 25 45 P3403UAL 15 65 10 45 P3403UBL 15 65 10 45 P3403UCL 20 65 15 45 P5103UAL 10 60 10 40 P5103UBL 15 60 10 40 P5103UCL 20 60 10 40 A2106UA3L 20 70 10 45 A2106UB3L 20 70 10 45 A2106UC3L 20 70 10 45 A5030UA3L 15 60 10 40 A5030UB3L 15 60 10 40 A5030UC3L 30 60 25 40 Note: Off-state capacitance (CO) is measured at 1 MHz with a 2 V bias. www.littelfuse.com 3 - 32 © 2006 Littelfuse • Telecom Design Guide Balanced Three-chip SIDACtor® Device IT IS IH IDRM -V +V VT VDRM VS Peak Value 100 tr = rise time to peak value td = decay time to half value Waveform = tr x td 50 SIDACtor Devices IPP – Peak Pulse Current – %IPP +I Half Value 0 0 tr td t – Time (µs) -I 14 12 10 IH 8 6 25 ˚C 4 2 IH (TC = 25 ˚C) tr x td Pulse Waveform Ratio of Percent of VS Change – % V-I Characteristics 0 -4 2.0 1.8 1.6 1.4 25 ˚C 1.2 1.0 0.8 0.6 0.4 -40 -20 0 -6 -8 -40 -20 0 20 40 60 80 100 120 140 160 Case Temperature (TC) – ˚C 20 40 60 80 100 120 140 160 Junction Temperature (TJ) – ˚C Normalized VS Change versus Junction Temperature Telecom Design Guide • © 2006 Littelfuse Normalized DC Holding Current versus Case Temperature 3 - 33 www.littelfuse.com