Atmel | SMART SAMA5D4 Series SAMA5D4 Evaluation Kit USER GUIDE Introduction This User Guide introduces the SAMA5D4 evaluation kit (SAMA5D4-EK) and describes the development and debugging capabilities for applications running on Atmel ® | SMART SAMA5D4 ARM ® -based embedded microprocessor units (eMPUs). SMART Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 Kit Contents Important: Unpack and inspect the kit carefully. Assemble the kit, following the assembly guide provided in the box. Contact your local Atmel® distributor if you have any issues concerning the contents of the kit. The SAMA5D4-EK includes: Boards ̶ One SAMA5D4X-MB main board ̶ One 7” display module (TM7000) Cables ̶ One micro-AB type USB cable ̶ One RJ45 crossover cable Power supply ̶ One universal input AC/DC power supply with US, Europe and UK plug adapters ̶ One CR1225 3V lithium battery A Welcome Letter Unpacked SAMA5D4-EK Related Items 2 Atmel SAMA5D4 Series Datasheet (http://www.atmel.com) PDA TM7000 Datasheet (http://www.pdaatl.com) SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Kit Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Related Items. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1. Evaluation Kit Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 1.1 2. Power up . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1 2.2 3. Power up the Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Sample Code and Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Evaluation Kit Hardware . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 3.1 3.2 4. Electrostatic Warning. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Main Board . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 PIO Usage and Interface Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10 4.11 4.12 4.13 4.14 4.15 4.16 Power Supply. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JTAG/ICE Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB Type A Dual Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . USB Micro-AB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . JLINK-OB USB MicroAB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . HDMI Connector . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . RS232 Connector with RTS/CTS Handshake Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DAA RJ11 Socket (6P4C) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SD/MMC Plus MCI0. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MicroSD MCI1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Ethernet ETH0/ETH1 RJ45 Socket J6/J7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . XPro Socket. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . LCD/TSC Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ISI Socket . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PIO Usage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 30 32 32 33 33 34 35 35 36 37 37 38 38 39 41 5. Schematics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 6. Revision History . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 3 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 1. Evaluation Kit Specifications Table 1-1. Evaluation Kit Specifications Characteristics Specifications Board SAMA5D4X-MB Board supply voltage 5V DC supply from an external AC-to-DC adapter or USB Temperature: - Storage 0°C to +70°C -40°C to +85°C Relative humidity 0 to 90% (non-condensing) - Operating Dimensions: MB (Main Board) 165 x 135 mm DM (Display Module) 190 x 145 mm RoHS status Compliant Kit Identification MB: SAMA5D4X-MB DM: TM7000 1.1 Electrostatic Warning Warning: ESD-Sensitive Electronic Equipment! Electrostatic sensitive device The Evaluation Kit is shipped in a protective anti-static package. The board system must not be subject to high electrostatic potentials. We strongly recommend using a grounding strap or similar ESD protective device when handling the board in hostile ESD environments (offices with synthetic carpet, for example). Avoid touching the component pins or any other metallic element on the board. SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 4 2. Power up 2.1 Power up the Board Unpack the board, taking care to avoid electrostatic discharge. Unpack the power supply, select the power plug adapter corresponding to that of your country and insert it in the power supply. Connect the power supply DC connector to the board and plug the power supply to an AC power plug. The LCD should light up and display a welcome page. Then, click or touch the icons displayed on the screen and view the demo. 2.2 Sample Code and Technical Support After booting up the board, you can run sample code or your own application on the evaluation kit. You can download sample code and get technical support from the Atmel website. Linux software and demos can be found on the website Linux4SAM. SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 5 3. Evaluation Kit Hardware 3.1 Introduction The SAMA5D4-EK is a fully-featured evaluation platform for Atmel SAMA5D44 ARM-based embedded microprocessor units (eMPU). The evaluation kit allows users to extensively evaluate, prototype and create application-specific designs. The SAMA5D4-EK is a new platform architecture based on a main board (MB) equipped with a SAMA5D44 device in BGA361 package and an optional display module (DM): The Main Board provides all the interface connectors required to attach the system to the application specific peripherals. This versatility allows the designer to create a densely-packed solution, which results in a more reliable product while simplifying system integration. The Display Module integrates a 7" LCD module (800x480 resolution), a maXTouch® capacitive touchscreen and capacitive Qtouch® buttons. 3.2 Main Board 3.2.1 Overview The SAMA5D4X-MB is based on the integration of an ARM Cortex ®-A5-based microprocessor with a set of standard peripherals. It is designed to provide a high-performance evaluation. The SAMA5D4X-MB is built around the SAMA5D44 microprocessor available in 361-ball BGA package (16x16 mm body, pitch 0.8 mm.) Figure 3-1. Main Board Top View SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 6 Figure 3-2. 7 Main Board Layout SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 Figure 3-3. 3.2.2 Main Board Architecture Technical specifications Table 3-1. SAMA5D4X-MB Specifications Characteristics Specifications CPU SAMA5D44: 361-ball BGA, 16x16 mm body, pitch 0.8 mm Oscillator Memory Debug support Power 12 MHz, 32 kHz, 25 MHz (PLLA @ 1.200 GHz, PCK @ 510 MHz, MCK @ 170 MHz) 4x 128 MB or 2x 256 MB DDR2 (800 MHz) 4Gb NAND Flash, Serial Flash JTAG connector Bridge USB-CDC / USART3 5VDC external jack Red power LED Indicators Blue and green user LEDs SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 8 Table 3-1. SAMA5D4X-MB Specifications (Continued) Characteristics Specifications Dual Host HS USB 2.0 port B&C Type A USB, 0.5 A with overcurrent limitation HS/FS USB 2.0 Host/Device port A Communication Micro-AB USB, 0.5 A with overcurrent limitation Dual Ethernet 10/100 MHz, RJ45 Soft-modem DAA Expansion interface Audio I2S, Line/Micro In and Heaphone output LCD 24 bits Video interface HDMI ISI MicroSD, 3.3V SD/MMC Standard 3.3V Mechanical push buttons User Interface 3 LEDs PIO LCD Expansion connectors XPro ISI Mesh: one jumper between two consecutive PIOBU lines Security Switches: one jumper between one PIOBU line and GND Temperature: – Operating 0° to +70° C – Storage 0° to +70° C Relative humidity 0 to 90% (non-condensing) Dimensions 165 mm x 135 mm x 20 mm (L x W x H) PCB 10 layers, Class5, FR4 RoHS status Compliant 9 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 3.2.3 Main Features SAMA5D44 CPU with its embedded resources ̶ 12 MHz, 32 kHz and 25 MHz oscillators ̶ Power rails. Memory: ̶ 4x 8-bit DDR2, 512 Mbytes (Micron MT47H128M8CF-25E) ̶ 1x 8-bit NAND Flash, 512 Mbytes (Micron MT29F4G08ABAEAWP), ̶ 1x Serial data Flash AT25DF321, ̶ 2x SD/MMC interfaces with connector, ̶ 1x 1-Wire DS28E05. Communication: ̶ 2x USB host communication ports with power switch and current limitation, ̶ 1x USB host/device with power switch and current limitation, ̶ 1x ETH0 10/100MHz PHY RMII, KSZ8081RNL MICREL, 3.2.4 1x ETH1 10/100MHz PHY RMII, KSZ8081RNL MICREL shared with LCD PIO, ̶ 1x Soft-Modem DAA. LCD, Video, ISI: ̶ 1x LCD 24-bit interface connector for LCD and QTouch, ̶ 1x ISI connector, ̶ 1x HDMI interface Si9022 Silicon Image with connector. Audio: ̶ ̶ Line Input (or Micro) and Headphone output, Debug solution: ̶ 1x peripheral Input/Output extension connector HE10 (PIO A to E), ̶ 1x JTAG/ICE connector, ̶ 1x DBGU/USB bridge device communication interface. Analog: ̶ Analog reference, ̶ Potentiometer connected on ADC input, ̶ Power lines with jumpers for current measurement. Buttons: ̶ Disable boot, reset and wakeup pushbuttons, ̶ 1x user input push button. LEDs: ̶ 1x red power LED, ̶ 1x blue user LED, ̶ 1x green user LED. Board Interface Connections The following connections are supported by the SAMA5D4X-MB: One JTAG, 20-pin IDC connector, USB, 5-pin Micro-AB connector, USB, 5-pin standard type A connector, One Micro SD card connector, SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 10 3.2.5 One MMC card connector, Two Ethernet RJ45 connectors, One modem CONEXANT DAA CX20548 connected to an RJ11 connector, One optional right-angle male XplainedPro connector HE14, 2x10 pts (not mounted), One stereo jack for headphones/line output One stereo jack for microphone input, One TFT LCD display witch TouchScreen female connector HE10 2x20 + 2x15 pts, One ISI connector HE10 female 2*15 pts, One HDMI connector, One 3x 20-pin PIO connector, Test points located throughout the board, One Lithium 12-mm Coin Cell Battery Holder (for backup battery socket), One Main power supply. SAMA5D4 Series Processor The Atmel® | SMART SAMA5D4 Series is a high-performance, power-efficient ARM® Cortex®-A5 processor MPU capable of running up to 600 MHz. It integrates the ARM NEON™ SIMD engine for accelerated signal processing, multimedia and graphics as well as a 128 KB L2-Cache for high system performance. The device features the ARM TrustZone® enabling a strong security perimeter for critical software, as well as several hardware security features. The device also features advanced user interface and connectivity peripherals. The SAMA5D4 devices have three software-selectable low-power modes: Idle, Ultra Low-power, and Backup. In Idle mode, the processor is stopped while all other functions can be kept running at normal operating bus frequency. In Ultra Low-power mode, the processor is stopped while all other functions can be kept running at minimum operating bus frequency. In Backup mode, only the real-time clock, real-time timer, backup SRAM, backup registers, and wake-up logic are running. The SAMA5D4 features an internal multi-layer bus architecture associated with 32 DMA channels to sustain the high bandwidth required by the processor and the high-speed peripherals. The device supports DDR2/LPDDR/LPDDR2 and SLC/MLC NAND Flash memory with 24-bit ECC. The comprehensive peripheral set includes a 720p hardware video decoder, an LCD controller with overlays for hardware-accelerated image composition, a resistive touch screen function, and a CMOS sensor interface. Connectivity peripherals include a dual 10/100 Ethernet MAC with IEEE1588, three HS USB ports, UARTs, SPIs and I2Cs. Security features includes an "on-the-fly" encryption-decryption process from the external DDR memory, tamper detection pins, secure storage of critical data, an integrity check monitor (ICM) to detect modification of the memory contents and a secure boot. The product also includes a dedicated coprocessor for public key cryptography such as RSA and elliptic curves algorithms (ECC), as well as AES, 3DES, SHA function and TRNG. These features permit to protect the system against counterfeiting, to safeguard sensitive data, authenticate safe program or secure external data transfers. The SAMA5D4 series is optimized for control panel/HMI applications needing video playback and applications that require high levels of connectivity in the industrial and consumer market. Its security features make the SAMA5D4 well suited for secure gateways or for the IoT. 11 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 3.2.6 Power Supply 3.2.6.1 Powering up the Board Main power can be supplied to the SAMA5D4X-MB using a +5V DC plug adapter: 5V DC power adapter connected to the 2.0 mm power supply jack. Figure 3-4. 5V Power Supply 5V/2A Input SW1 SDKTA20100 2 3 1 U40 ZEN056V230A16LS 3 R334 1K VCC_5V U25 1 7 1 2 J4 DC POWER JACK 1 3 2 C105 100nF C101 1uF 6 2 IN IN_pad OUT1 OUT2 FLAG EN GND 4 5 3 + C5 33uF C103 100nF NCP349MNAETBG An NCP349 overvoltage device is available to prevent board damage in case an unsuitable power adapter is used. The NCP349 shuts down and the board does not power on. No visible indicator is provided to indicate that an overvoltage condition exists. The board can also be powered from the USB port. A typical USB port is limited to 500 mA max. 3.2.7 Power Supply Topology and Power Distribution 3.2.7.1 Power Lines Refer to the Power Supplies and Power Supply Connections tables in the SAMA5D4 datasheet. 3.2.7.2 Power-up and Power-down Considerations Power-up and power-down considerations are described in section “Power Considerations” of the SAMA5D4 Series datasheet. 3.2.7.3 PMIC-ACT8865 power management solution The ACT8865 is a complete, cost-effective, highly-efficient ActivePMU™ power management solution, optimized to provide a unique power solution and voltage sequencing for the Atmel SAMA5D3/SAMA5D4 and SAM9 series MPUs. It also meets the control requirements of these devices. The ACT8865 features three step-down DC/DC converters and four low-noise, low-dropout linear regulators. Warning: Be aware of the I2C limitation related to the ACT8865. See “Errata info” section in the ACT8865 Datasheet (http://www.active-semi.com). SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 12 Figure 3-5. Power Management VCC_1V8 R373 VCC_5V 1R MN12 C271 2.2uF ACT8865QI305-T C276 4.7uF 31 26 16 C277 4.7uF 18 25 VCC_3V3 VCC_2V 23 R339 R195 10K R209 10K WKUP PMIC_IRQ_PE0 NRST_3V3 20 0R R340 0R 17 R341 0R 13 R342 330R 12 R343 0R 11 10 PWRHLD R345 R347 PMIC_TWCK0_PA31 PMIC_TWD0_PA30 21 22 0R 0R 32 PB4 C285 47nF Reset 9 VP1 VP2 VP3 INL45 INL67 SW1 OUT1 NC1 NC2 SW2 OUT2 R374 C287 100nF DNP R353 SHDN R117 0R C278 10uF C279 10uF C280 10uF 2 2.2uH SW3 OUT3 15 19 L40 VDDIOP 1V2_HDMI 1 C281 10uF L43 180ohm L45 180ohm VDDIOM VCC_3V3 2 2.2uH C282 10uF nRSTO C283 10uF VDDUTMII 1 L46 VDDANA FUSE_2V5 SCL SDA OUT4 OUT5 REFBP OUT6 nPBIN (2V5) 4 (3V3) 7 (1V8) R346 0R R429 0R 8 R348 0R L47 10uH/150mA 1V8_AUDIO 3V3_AUDIO R349 1R VOUT7 C286 4.7uF EP GP1 GP2 GP3 3 180ohm C284 100nF PWRHLD C267 4.7uF 33 2 1 C268 4.7uF C270 4.7uF C269 4.7uF 3 1 1K 0R 51K C263 L44 C274 10uF Q9 BSN20 C290 10nF R146 27 24 2 2.2uH JP18 nIRQ 29 28 14 SMD TP26 Wake up L42 nPBSTAT R352 50K VDDCORE JP16 30 1 PWREN GA PB1 VDDREF VDDIODDR 180ohm L41 JP17 VSEL 1 5 6 VDDREF OUT7 PWRHLD C272 2.2uF 1 C273 4.7uF VDDIODDR_MPU JP15 2 C289 1uF JP14 2 VDDREF R354 100K C288 100nF DNP 2 100nF The ACT8865 provides: All power supplies required by the SAMA5D44 device, ̶ 1.8V VDDCORE ̶ 1.8V VDDIODDR ̶ 2.0V VDDBU ̶ 3.3V VDDIOP, VDDOSC, VDDIOM, VDDANA, VDDUTMII ̶ 2.5V VDDFUSE Power supplies to external chips on the main board. ̶ 1.2V HDMI ̶ 1.8V Memory, Audio codec ̶ 3.3V Memory, Audio codec, Ethernet PHY, HDMI, SAM3U 3.2.7.4 Backup Power Supply The SAMA5D4X-MB requires a battery (3V Lithium Battery type CR1225 or equivalent) in order to permanently power the backup part of the SAMA5D44 device. Figure 3-6. VDDBU VCC_3V3 U31 U32 J12 2 8 VDD VCC_2V VOUT 4 6 3 PFI MR# GND R255 4 0R 1 VBAT RESET# C183 100nF 1 PFO# 7 5 C186 1uF C185 100nF 2 VIN VOUT 3 CE GND NCP4682DSQ20T1G TPS3619-33 3.2.7.5 Power Supply Control In the ACT8865, three DCDCs (1.8V, 1.2V, 3.3V) and two LDOs outputs are available. 13 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 VDDBU_2V JP13 2 C191 1uF 1 All ACT8865 outputs can be controlled by the TWI interface through software. The three DCDCs outputs can be enabled or disabled by the SAMA5D44 SHDN output: SHDN=0: The DCDCs output is disabled SHDN=1: The DCDCs output is enabled SHDN Control 2 EP GA PWRHLD 33 10 1K GP1 GP2 GP3 R353 SHDN 29 28 14 Figure 3-7. Two pushbuttons are also available: Wakeup pushbutton: when pressed, the ACT8865 power outputs are restarted if the ACT8865 is in shutdown mode. Reset pushbutton: when pressed, the ACT8865 transfers the reset signal to NRST_3V3, and then to NRST_2V for the MPU by using a resistor divider. Figure 3-8. Reset/Wakeup VCC_3V3 NRST_3V3 R343 11 0R nRSTO R521 4.7k NRST_3V3 PB1 EP 33 GP1 GP2 GP3 NRST_2V R523 110k Wake up R374 3.2.8 2 R352 50K R522 68k nPBIN GA 9 29 28 14 PB4 Reset 0R Microcontroller Resources 3.2.8.1 Clock Source The microcontroller requires two clock sources: 32.768 kHz crystal for slow clock oscillator input and embedded RTC 12 MHz main crystal oscillator SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 14 Figure 3-9. Clock Generator XIN R76 1Mohm DNP XOUT Y3 1 4 2 3 C64 27pF 12 MHz SAMA5D44 C63 27pF XIN XOUT XIN32 XOUT32 W12 V12 W2 W3 XIN32 R97 1Mohm DNP XIN XOUT XIN32 XOUT32 XOUT32 Y4 C71 20pF 3.2.9 32.768 kHz C70 20pF Memory The SAMA5D4X-MB is equipped with three types of memory devices: 15 Four DDR2 1.8V 1Gbit, 8 banks, 4x8 bits data interface connected to DDR-D[0-31] or two DDR2 1.8V 2Gbit, 8 banks, 2x16 bits data interface connected to DDR-D[0-31], One SLC NAND Flash 3.3V 4Gbit, TSOP or BGA, 8-bit data interface connected to D[0-7]. NAND Flash compatible with Open NAND Flash Interface Specification (ONFI 2.0 min). SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 External Memory K9 0R J2 J7 J1 DDR2_VREF VDDIODDR NC_A2 NC_E2 RFU_R3 RFU_R7 VREF VSSDL VDDL VSS1 VSS2 VSS3 VSS4 VSS5 C144 100nF MPU_DDR2_DQS0+ MPU_DDR2_DQS0- B7 A8 MPU_DDR2_DQS1+ MPU_DDR2_DQS1- B3 F3 MPU_DDR2_DM1 MPU_DDR2_DM0 A2 E2 R3 R7 MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 G2 G3 G1 MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn G8 F7 G7 F3 MPU_DDR2_CK+ MPU_DDR2_CKMPU_DDR2_CKEn E8 F8 F2 R375 F9 0R E2 E7 E1 DDR2_VREF C291 100nF VDDIODDR A9 C1 C3 C7 C9 VDDQ6 VDDQ7 VDDQ8 VDDQ9 VDDQ10 A9 C1 C3 C7 C9 E9 G1 G3 G7 G9 VDDQ1 VDDQ2 VDDQ3 VDDQ4 VDDQ5 VDDQ6 VDDQ7 VDDQ8 VDDQ9 VDDQ10 A1 E1 J9 M9 R1 ODT A3 E3 J3 N1 P9 C138 100nF UDM LDM CK CK CKE F7 E8 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 BA0 BA1 BA2 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 LDQS LDQS C8 C2 D7 D3 D1 D9 B1 B9 MPU_DDR2_DQ8 MPU_DDR2_DQ9 MPU_DDR2_DQ10 MPU_DDR2_DQ11 MPU_DDR2_DQ12 MPU_DDR2_DQ13 MPU_DDR2_DQ14 MPU_DDR2_DQ15 B7 A8 MPU_DDR2_DQS1+ MPU_DDR2_DQS1- B3 MPU_DDR2_DM1 CS RAS CAS WE CK CK CKE LDM ODT NC_A2 RFU_L3 RFU_L7 VREF VSSDL VDDL C292 100nF MT47H128M8CF-25E A2 L3 L7 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9 R230 UDQS UDQS H8 H3 H7 J2 J8 J3 J7 K2 K8 K3 H2 K7 L2 L8 MPU_DDR2_A0 MPU_DDR2_A1 MPU_DDR2_A2 MPU_DDR2_A3 MPU_DDR2_A4 MPU_DDR2_A5 MPU_DDR2_A6 MPU_DDR2_A7 MPU_DDR2_A8 MPU_DDR2_A9 MPU_DDR2_A10 MPU_DDR2_A11 MPU_DDR2_A12 MPU_DDR2_A13 A7 B2 B8 D2 D8 J8 K8 K2 LDQS LDQS CS RAS CAS WE MPU_DDR2_DQ0 MPU_DDR2_DQ1 MPU_DDR2_DQ2 MPU_DDR2_DQ3 MPU_DDR2_DQ4 MPU_DDR2_DQ5 MPU_DDR2_DQ6 MPU_DDR2_DQ7 MPU_DDR2_DQ8 MPU_DDR2_DQ9 MPU_DDR2_DQ10 MPU_DDR2_DQ11 MPU_DDR2_DQ12 MPU_DDR2_DQ13 MPU_DDR2_DQ14 MPU_DDR2_DQ15 VSS2 VSS3 VSS4 VSS5 MPU_DDR2_CK+ MPU_DDR2_CKMPU_DDR2_CKEn BA0 BA1 BA2 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 A3 E3 J1 K9 L8 K7 L7 K3 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 VSSQ1 VSSQ2 VSSQ3 VSSQ4 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9 VSSQ10 L2 L3 L1 MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn A7 B8 D2 D8 E7 F2 F8 H2 H8 B2 MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 VDD1 VDD2 VDD3 VDD4 VDD5 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 R8 MPU_DDR2_A0 MPU_DDR2_A1 MPU_DDR2_A2 MPU_DDR2_A3 MPU_DDR2_A4 MPU_DDR2_A5 MPU_DDR2_A6 MPU_DDR2_A7 MPU_DDR2_A8 MPU_DDR2_A9 MPU_DDR2_A10 MPU_DDR2_A11 MPU_DDR2_A12 MPU_DDR2_A13 U34 A1 E9 H9 L1 VDDIODDR VDDIODDR U17 VDD2 VDD3 VDD4 VDD5 Figure 3-10. MT47H128M8CF-25E MPU_DDR2_CK+ R238 100R DNP VDDIODDR VDDIODDR R232 K9 0R J2 J7 J1 DDR2_VREF C140 100nF VDDIODDR UDM LDM CK CK CKE ODT NC_A2 NC_E2 RFU_R3 RFU_R7 VREF VSSDL VDDL MPU_DDR2_DQS3+ MPU_DDR2_DQS3- B3 F3 MPU_DDR2_DM3 MPU_DDR2_DM2 A2 E2 R3 R7 MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 G2 G3 G1 MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn G8 F7 G7 F3 MPU_DDR2_CK+ MPU_DDR2_CKMPU_DDR2_CKEn E8 F8 F2 R376 F9 0R E2 E7 E1 DDR2_VREF C293 100nF VDDIODDR C294 100nF MT47H128M8CF-25E A1 E9 H9 L1 A9 C1 C3 C7 C9 VDDQ6 VDDQ7 VDDQ8 VDDQ9 VDDQ10 MPU_DDR2_DQS2+ MPU_DDR2_DQS2- B7 A8 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 VDD2 VDD3 VDD4 VDD5 A9 C1 C3 C7 C9 E9 G1 G3 G7 G9 VDDQ1 VDDQ2 VDDQ3 VDDQ4 VDDQ5 VDDQ6 VDDQ7 VDDQ8 VDDQ9 VDDQ10 UDQS UDQS A3 E3 J3 N1 P9 C136 100nF CS RAS CAS WE F7 E8 H8 H3 H7 J2 J8 J3 J7 K2 K8 K3 H2 K7 L2 L8 BA0 BA1 BA2 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 LDQS LDQS C8 C2 D7 D3 D1 D9 B1 B9 MPU_DDR2_DQ24 MPU_DDR2_DQ25 MPU_DDR2_DQ26 MPU_DDR2_DQ27 MPU_DDR2_DQ28 MPU_DDR2_DQ29 MPU_DDR2_DQ30 MPU_DDR2_DQ31 B7 A8 MPU_DDR2_DQS3+ MPU_DDR2_DQS3- B3 MPU_DDR2_DM3 CS RAS CAS WE LDM CK CK CKE ODT NC_A2 RFU_L3 RFU_L7 VREF VSSDL VDDL A2 L3 L7 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9 J8 K8 K2 LDQS LDQS MPU_DDR2_DQ16 MPU_DDR2_DQ17 MPU_DDR2_DQ18 MPU_DDR2_DQ19 MPU_DDR2_DQ20 MPU_DDR2_DQ21 MPU_DDR2_DQ22 MPU_DDR2_DQ23 MPU_DDR2_DQ24 MPU_DDR2_DQ25 MPU_DDR2_DQ26 MPU_DDR2_DQ27 MPU_DDR2_DQ28 MPU_DDR2_DQ29 MPU_DDR2_DQ30 MPU_DDR2_DQ31 A7 B2 B8 D2 D8 MPU_DDR2_CK+ MPU_DDR2_CKMPU_DDR2_CKEn BA0 BA1 BA2 MPU_DDR2_A0 MPU_DDR2_A1 MPU_DDR2_A2 MPU_DDR2_A3 MPU_DDR2_A4 MPU_DDR2_A5 MPU_DDR2_A6 MPU_DDR2_A7 MPU_DDR2_A8 MPU_DDR2_A9 MPU_DDR2_A10 MPU_DDR2_A11 MPU_DDR2_A12 MPU_DDR2_A13 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 VSS2 VSS3 VSS4 VSS5 L8 K7 L7 K3 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 A3 E3 J1 K9 L2 L3 L1 MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn U35 VSSQ1 VSSQ2 VSSQ3 VSSQ4 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9 VSSQ10 MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A7 B8 D2 D8 E7 F2 F8 H2 H8 B2 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 R8 VSS1 VSS2 VSS3 VSS4 VSS5 MPU_DDR2_A0 MPU_DDR2_A1 MPU_DDR2_A2 MPU_DDR2_A3 MPU_DDR2_A4 MPU_DDR2_A5 MPU_DDR2_A6 MPU_DDR2_A7 MPU_DDR2_A8 MPU_DDR2_A9 MPU_DDR2_A10 MPU_DDR2_A11 MPU_DDR2_A12 MPU_DDR2_A13 VDD1 VDD2 VDD3 VDD4 VDD5 U16 A1 E1 J9 M9 R1 MPU_DDR2_CK- MT47H128M8CF-25E U21 16 17 8 18 9 NAND_CLE NAND_ALE NAND_REn NAND_WEn NAND_CEn NAND_RDY 0R R249 7 8 7 6 5 19 RR14 100k 1 2 3 4 3V3_NAND R250 100k DNP 1 2 3 4 5 6 10 11 14 15 20 21 22 23 24 35 CLE ALE RE WE CE I/O0 I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 I/O7 N.C18 N.C19 N.C20 N.C21 N.C22 N.C23 N.C24 R/B WP N.C1 N.C2 N.C3 N.C4 N.C5 N.C6 N.C7 N.C8 N.C9 N.C10 N.C11 N.C12 N.C13 N.C14 N.C15 N.C16 DNU2 DNU1 VCC_1 VCC_2 VCC_3 VCC_4 VSS_1 VSS_2 VSS_3 VSS_4 29 30 31 32 41 42 43 44 26 27 28 33 40 45 46 47 38 NAND_IO0 NAND_IO1 NAND_IO2 NAND_IO3 NAND_IO4 NAND_IO5 NAND_IO6 NAND_IO7 3V3_NAND 12 37 34 39 13 36 25 48 MT29F4G08ABAEAWP 3.2.9.1 DDR_CALP and DDR_CALN analog inputs Two specific analog inputs, DDR_CALP and DDR_CALN, are used to calibrate all DDR I/Os. VDDIODDR R59 200R_1% R58 200R_1% C19 B19 DDR_CALN DDR_CALP SAMA5D44 Table 3-2. DDR_CALN & DDR_CALP CALP pull-down CALN pull-up DDR2 200R 200R LPDDR2 240R 240R 3.2.9.2 Boot Memories A mechanical pushbutton embedded on the board disables the signal selection (CS#) of the bootable memory components (NAND Flash and Serial DataFlash) using a non-inverting 3-state buffer. SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 16 Figure 3-11. CS Disable VCC_3V3 R526 C58 100nF R53 10k U19 1 AT25_SPI0_NCPS0 0R 0R VCC 2 R51 3 5 4 2 1CS_NPCS0 JP6 SPI Flash CS GND NL17SZ126DFT2G DIS_BOOT PB3 C57 100nF U20 1 VCC 2 NAND_NCS3 3 5 4 NAND_CEn NAND Flash CS GND NL17SZ126DFT2G The device can boot from: an SD CARD connected on MCI1 a Dataflash connected on NPCS0 SPI0 an 8-Bit NandFlash connected to D0-D7 3.2.9.3 SPI Serial Flash The SAMA5D4X-MB embeds one serial Flash AT25DF321A. Figure 3-12. Serial Flash on SPI0 SPI ROM R241 VCC_3V3 R525 100k 0R U15 AT25_SPI0_SI AT25_SPI0_SO AT25_SPI0_SPCK 5 2 6 CS_NPCS0 1 SI SO SCK VCC WP HOLD CS GND 8 3 7 C137 100nF 4 AT25DF321A 3.2.10 High-Speed Multimedia Card Interface (HSMCI) 3.2.10.1 High-Speed Card Interfaces (MCI) The SAMA5D4X-MB has two high-speed Multimedia Card interfaces (MCIs) that support the multimedia card (MMC) Specification V4.3, the SD Memory Card Specification V2.0 and the SDIO V1.1 specification: MCI0 interface. It is based on an 11-pin interface (clock, command, 8-bit data, power lines). MCI1 Interface. It is based on a 7-pin interface (clock, command, 4-bit data, power lines). 3.2.10.2 HSMCI Card Connector A standard MMC/SD card (push and click type) connector, connected to MCI0, is available on the top of the board. It features a top mount, a push-lock / push-eject mechanism and a card detection switch. A micro SD card (push and click type) connector, connected to MCI1, is available on the top of the board. It features a bottom mount and a card detection switch. 17 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 Figure 3-13. HSMCI0 & HSMCI1 VCC_3V3 0R 8 7 6 5 R527 RR1 68k JP5 2 R239 R396 R395 10k 10k 10k C193 10uF C192 100nF MCI0 SD/MMCPlus card 1 2 3 4 1 (MCI0_WP) (MCI0_CD) MCI0_CD_PE5 16 15 14 J20 8 7 6 5 4 3 2 1 9 MCI0_DA1_PC7 MCI0_DA0_PC6 MCI0_CK_PC4 MCI0_CDA_PC5 MCI0_DA3_PC9 MCI0_DA2_PC8 13 12 11 10 7SDMM-B0-2211 MCI0_DA4_PC10 MCI0_DA5_PC11 MCI0_DA6_PC12 MCI0_DA7_PC13 8 7 6 5 VDD_MCI1 R264 10k (MCI1_CD) MCI1_CD_PE6 R248 10k MCI1 Micro SD card 1 2 3 4 RR12 68k J14 10 8 SW2 7 6 5 4 3 2 1 (MCI1_DA1) (MCI1_DA0) MCI1_DA1_PE21 MCI1_DA0_PE20 (MCI1_CK) MCI1_CK_PE18 SW1 (MCI1_CDA) (MCI1_DA3) (MCI1_DA2) MCI1_CDA_PE19 MCI1_DA3_PE23 MCI1_DA2_PE22 11 12 13 14 PJS008-2120-0 9 C195 100nF C73 10uF 3.2.11 Communication Interfaces The SAMA5D4X-MB is equipped with the following communication interfaces. 3.2.11.1 Ethernet ETH0 (PHY:KSZ8081RNL MICREL) Figure 3-14. ETH0 Interface 10Base-T/100Base-TX 25 24 23 13 14 15 16 18 20 29 28 G0_RX1_PB9 G0_RX0_PB8 G0_RXDV_PB6 G0_RXER_PB7 PHY0_VDD G0_MDC_PB16 G0_MDIO_PB17 G0_IRQ_PE1 R43 R44 R20 3 VDDA_3V3 8 7 6 5 PHY0_VDDA MDC MDIO INTRP/NAND_TREE TX+ 1 6 2 TD- TX- 2 RXP 5 3 RD+ RX+ 3 RX- 6 5 CT VDD_1V2 GND PADDLE NC1 NC2 NC3 REXT 6 RD- 4 2 C24 2.2uF C25 100nF C100 100nF C99 100nF 75 1 33 22 26 27 10 R16 8 ETH0_XO 9 ETH0_XI 75 75 7 NC 4 5 GND_ETH0 1nF 75 8 7 PHY0_VDD 6.49k/1% 8 J00-0061NL PHY0_VDD XO 17 PHY0_VDD TXM 1 2 3 4 1 2 3 4 RR5 10k 1 TD+ 7 4 CT RXM 22R 8 7 6 5 TXP 1k 1k 12 11 21 RR6 10k J6 RXF_CLK/B-CAST_OFF TXD1 TXD0 TXEN PHYAD0 PHYAD1 RXD1/PHYAD2 RXD0/DUPLEX CRS_DV/CONFIG2 RXER/ISO CONFIG1 CONFIG0 15 19 G0_TXCK_PB0 G0_TX1_PB13 G0_TX0_PB12 G0_TXEN_PB2 16 EARTH_ETH0 U10 Terminal Resistor close to output side VDDIO XI R199 10k EARTH_ETH0 R203 10k PHY0_VDD D5 PHY0_VDD LED0/NWAYEN LED1/SPEED 2 30 31 4 At the De-Assertion of Reset: NRST_3V3 R25 0R PHY ADD[2:0]-pin15/14/13: 001 = 1 CONFIG[2:0]-pin18/29/28:001,RMII mode Duplex Mode-pin16: 1,Half Duplex Isolate Mode-pin20: 0,Disable Speed Mode-pin31: 1,100Mbps Nway Auto-Negotiation-p30: 1,Enable 32 1 R197 470R 3 R205 470R APTB1612YSGC-F01 RESET KSZ8081RNB ETH0_XI ETH0_XO R8 DNP 1Mohm Y1 4 1 C17 22pF 3 2 25 MHz C27 22pF 3.2.11.2 Ethernet ETH1 (PHY: KSZ8081RNL MICREL) The ETH1 control bus is multiplexed with the LCD. Consequently, the tri-state bus transceivers 74LVC244 and 74LVC1G66 have been added. SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 18 Figure 3-15. ETH1 Interface 10Base-T/100Base-TX E1_TX1 E1_TX0 E1_TXEN 25 24 23 13 14 15 16 18 20 29 28 E1_RX1 E1_RX0 E1_RXDV E1_RXER J7 RXF_CLK/B-CAST_OFF TXP TXD1 TXD0 TXEN PHYAD0 PHYAD1 RXD1/PHYAD2 RXD0/DUPLEX CRS_DV/CONFIG2 RXER/ISO CONFIG1 CONFIG0 R37 G1_IRQ_PE2 0R 3 PHY1_VDDA TXM RXP MDC MDIO INTRP/NAND_TREE VDD_1V2 GND PADDLE NC1 NC2 NC3 REXT VDDA_3V3 RR7 R21 R38 10k 1k 1k 1 2 3 4 RR4 10k 1 2 3 4 PHY ADD[2:0]-pin15/14/13: 010 = 2 CONFIG[2:0]-pin18/29/28:001,RMII mode Duplex Mode-pin16: 1,Half Duplex Isolate Mode-pin20: 0,Disable Speed Mode-pin31: 1,100Mbps Nway Auto-Negotiation-p30: 1,Enable PHY1_VDD XO 17 PHY1_VDD PHY1_VDD TX+ 1 6 2 TD- TX- 2 5 3 RD+ RX+ 3 RX- 6 5 CT 8 7 6 5 8 7 6 5 At the De-Assertion of Reset: 1 TD+ 7 4 CT RXM 12 11 21 E1_MDC E1_MDIO EARTH_ETH1 16 19 15 U7 E1_TXCK VDDIO XI 6 RD- 4 2 C21 2.2uF C22 100nF C98 100nF C97 100nF 75 1 33 22 26 27 10 75 75 7 NC 4 5 GND_ETH1 1nF 75 8 R17 8 ETH1_XO 9 ETH1_XI 7 8 6.49k/1% PHY1_VDD R202 10k EARTH_ETH1 R207 10k PHY1_VDD D6 J00-0061NL L24 220ohm R179 LED0/NWAYEN LED1/SPEED NRST_3V3 R13 0R 32 30 31 2 1 R201 470R 4 3 R206 470R APTB1612YSGC-F01 RESET KSZ8081RNB PHY1_VDD VCC_3V3 PHY1_VDD R11 0R C23 10uF L5 120 OHM VCC G1_TXCK_PA2 G1_TX1_PA15 G1_TX0_PA14 G1_TXEN_PA4 PHY1_VDDA C8 10uF C12 100nF C30 100nF U8 C13 100nF 18 4 6 8 1 LCD_ETH1_CONFIG 3 5 7 9 G1_RX1_PA13 G1_RX0_PA12 G1_RXDV_PA10 G1_RXER_PA11 19 1Y0 1A1 1A2 1A3 1A0 1Y1 1Y2 1Y3 20 2 16 14 12 E1_TXCK E1_TX1 E1_TX0 E1_TXEN 17 15 13 11 E1_RX1 E1_RX0 E1_RXDV E1_RXER ETH1_XI ETH1_XO 1OE 2Y0 2Y1 2Y2 2Y3 2A0 2A1 2A2 2A3 2OE GND 1 3 2 1A 2A PHY1_VDD C119 100nF U27 2Y 5 6 4 4 G1_MDIO_PA23 2 C115 100nF VCC E Y Z GND GND 5 1 U28 4 G1_MDC_PA22 2 E1_MDIO 3 74LVC1G66GW SN74LVC2GU04 PHY1_VDD C116 100nF VCC E Y Z GND 5 1 E1_MDC 3 74LVC1G66GW Note: Port A is shared between LCD and ETH1. To use ETH1, jumper JP2 must be in place. 3.2.11.3 USB Host B/C High & Full Speed Interface Two USB host stacked type A connectors. 3.2.11.4 USB Host /Device A Interface 19 One USB device standard micro-AB connector. SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 4 2 3 25 MHz PHY1_VDD VCC 1Y 1Mohm DNP 1 C18 22pF 74LVC244APW MN10 R9 Y2 10 0R GND_ETH1 EARTH_ETH1 C26 22pF Figure 3-16. USB Host & Device Interface VCC_3V3 3V3_USB 0R R5 L28 220ohm MN3 C110 100nF VCC_5V + C16 33uF 8 7 C117 100nF L27 220ohm 6 5 C109 100nF J5 C118 100nF OUTA ENA IN FLGA GNG FLGB OUTB ENB 1 1A 1 4 2Y 2A 3 2 USBB_EN5V_PE11 2 GND 3 USBC_EN5V_PE12 SN74LVC2GU04 4 AIC1526-1GS + C6 33uF MN4 5 VCC 6 1Y USB_OVCUR_PD9 USB_OVCUR_PD9 Dual USB A A1 A2 A3 A4 USBB_DM USBB_DP L1 220ohm B1 B2 B3 B4 A B 1 2 USBC_DM USBC_DP 3 4 LCD_ETH1_CONFIG=0: LCD 5v disable; ETH1 enable EARTH_USB LCD_ETH1_CONFIG=1: LCD 5v enable(LCD_DETECT#=0); ETH1 disable 3V3_USB R2 C2 100nF U2 5 + C92 100nF C3 33uF LCD_ETH1_CONFIG 2 5V_LCD 10k JP2 VCC 1 L21 220ohm 1 4 2 VCC_5V GND MN1 8 C94 100nF L29 220ohm USB_VBUS_5V 6 JP3 2 C91 100nF 7 C102 10uF 1 5 OUTA ENA IN FLGA GNG FLGB OUTB ENB 1 3V3_USB 3 C4 100nF 74LVC1G08GV 3 R7 47k MN2 2 5 VCC 6 1Y 1A 1 4 2Y 2A 3 2 USB_OVCUR_PD9 4 GND 3V3_USB AIC1526-1GS R4 1k LCD_DETECT# USBA_EN5V_PE10 SN74LVC2GU04 R3 100k R172 10k R176 10 SHD VBUS DM DP ID GND USBA_VBUS_PE31 R175 200K 1% 1 2 3 4 5 USBA_DM USBA_DP 9 6 11 EARTH_USB EN_PWRLCD 100k 1% 8 7 C108 15pF J1 47589-0001 3.2.12 Debug JTAG/ICE and DBGU interfaces The MB includes a built-in SEGGER J-Link-on-Board device. The J-Link functionality is implemented with an ATSAM3U4C microcontroller in LQFP100 package. The ATSAM3U4C provides JTAG functions and a bridge USB/Serial DBGU port. Two LEDs (D15 and D18) that are mounted on the main board signal the status of the J-Link-on-Board device. The J-Link-OB-ATSAM3U4C is designed to provide an efficient on-board alternative to the standard J-Link. An optional 20-pin header is provided on the board to allow for the JTAG connection. To use this functionality, the JP11 jumper must be in place. SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 20 JLINK-OB VCC_3V3_3U 1 JP12 43 T2 4 2 VCC_3V3_3U NRST_3U C334 10nF R408 78 10pF 50 49 4 90 91 92 7 8 97 98 99 100 71 70 93 94 95 69 16 15 68 67 66 65 64 63 62 58 XIN32 XOUT32 R412 R413 100K 39R 39R 75 74 42 77 80 81 76 XIN XOUT FWUP DHSDM DFSDM DFSDP DHSDP D17 TVS DNP TVS DNP 2 45 1 79 9 R411 VCC_3V3_3U D16 L49 220 Ohm 1 15pF Y5 12MHz EARTH_USB2 GNDBU GNDANA GNDUTMI GNDPLL GND1 GND2 GND3 SHD 11 C337 R410 47K 1 2 3 4 5 VBG 26 27 28 29 30 31 32 33 37 38 39 40 41 10 11 12 13 14 17 18 19 20 5 21 23 24 25 96 84 85 6 86 TMS_3U R401 0R TCK_3U R403 0R C333 100nF R398 4.7K R399 VCC_3V3_3U 4.7K R400 0R NRST_3U R402 0R TDI_3U R404 0R TDO_3U R405 4.7K J21 1 2 3 4 5 TRSTIN TRSTOUT VCC RESET TMS NC2 GND1 TDI TCK NC1 GND2 TDO 10 9 8 7 6 TC2050-IDC TRESIN TRESOUT T3 T4 RXDaux TXDaux R443 RX_3U TX_3U TDIIN 3 JP19 1 RS232_TXD 3 1 RS232_RXD 2 C367 100nF TCKOUT TMSOUT JP20 2 TDIOUT TDOIN TCKIN ENSPI TCKOUT VCC_3V3 0R 1 U39 1 7 3 TMSIN OE1 OE2 Y2 VCC A1 Y1 GND A2 To SAMA5D4x 8 5 R445 0R 6 4 R446 0R DBGU_TXD3_PE17 DBGU_RXD3_PE16 NL27WZ126USG JP10 2 2 LED1_3U LED2_3U RTCKIN JP21 R444 10K 1 1 CDC Enabled,close to disable JTAG Enabled,close to disable JP11 2 D15 1 Red R414 VCC_3V3_3U 1K 2 D18 1 Green R415 1K 46 3 82 72 35 61 89 VBUS_DEBUG VBUS DM DP ID GND SAM3U_LQFP100 TEST JTAGSEL VDDIO_1 VDDIO_2 VDDIO_3 VDDIO_4 15pF 1 8 7 6.8K_1% C335 2 10 6 R409 NRST NRSTB 88 60 36 22 C336 44 48 AD12BVREF ADVREF VDDCORE_1 VDDCORE_2 VDDCORE_3 VDDCORE_4 VDDCORE_5 VCC_3V3_3U J22 105017-0001 0R DNP ERASE 3 VCC_3V3_3U 57 47 PA0/PGMNCMD PA1/PGMRDY PA2/PGMNOE PA3/PGMNVALID PA4/PGMM0 PA5/PGMM1 PA6/PGMM2 PA7/PGMM3 PA8/PGMD0 PA9/PGMD1 PA10/PGMD2 PA11/PGMD3 PA12/PGMD4 PA13/PGMD5 PA14/PGMD6 PA15/PGMD7 PA16/PGMD8 PA17/PGMD9 PA18/PGMD10 PA19/PGMD11 PA20/PGMD12 PA21/PGMD13 PA22/PGMD12 PA23/PGMD15 PA24 PA25 PA26 PA27 PA28 PA29 PA30 PA31 2 SPX3819M5-L-3-3 TDI TDO/TRACESWO TCK/SWCLK TMS/SWDIO 2 4 51 54 56 55 VDDPLL BYP TDI_3U TDO_3U TCK_3U TMS_3U 87 83 9 34 59 EN C340 100nF VDDOUT C339 10uF VDDIN 5 PB0 PB1 PB2 PB3 PB4 PB5 PB6 PB7 PB8 PB9 PB10 PB11 PB12 PB13 PB14 PB15 PB16 PB17 PB18 PB19 PB20 PB21 PB22 PB23 PB24 VOUT GND 52 3 VIN VDDBU VDDANA VDDUTMI 2 53 1 C338 10uF 3 U37 VBUS_DEBUG R455 0R DNP 2 U36 VCC_3V3_3U VCC_5V ENSPI VCC_3V3 73 Figure 3-17. VCC_3V3_3U VDDOUT_3U VCC_3V3_3U VDDIOP To SAMA5D4x TRSTOUT R416 TRSTIN 150R TDIOUT TDIIN R421 150R TMSOUT TMSIN R423 150R TCKOUT TCKIN R424 150R RR19 0R 8 7 6 5 VDDIOP R417 R418 R419 R420 100K 100K 100K 100K DNP DNP DNP DNP NTRST TDI TMS TCK 7 6 5 1 2 3 4 RTCKIN TDOIN TRESOUT R428 TRESIN R517 RR18 0R 8 1 2 3 4 NTRST TDI TMS TCK RTCK TDO NRST_3V3 0R DNP R422 0R R425 DNP RTCK TDO NRST_3V3 150R 150R 0R R426 DNP R427 0R DNP DNP J23 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 BR20-H ICE INTERFACE 3.2.12.1 Disabling J-Link-OB-ATSAM3U4C Jumper JP11 disables the J-Link-OB-ATSAM3U4C JTAG functionality. Jumper JP11 not installed: JLINK-OB device is enabled and fully functional Jumper JP11 installed: JLINK-OB device is disabled Note: Jumper JP11 only disables the JTAG controller inside the JLINK-OB. The debug serial port (DBGU) remains operational. The built-in JTAG controller does not have to be disabled when an external JTAG controller is used through the 20-pin JTAG port. The internal J-Link-OB is activated only after it receives a first command. Otherwise, it remains disabled. 3.2.12.2 Hardware UART via CDC In addition to the J-Link-OB functionality, the ATSAM3U4C microcontroller provides a bridge to a debug serial port (DBGU) of the processor. The port is made accessible over the same USB connection used by JTAG by implementing communication device class (CDC), which allows terminal communication with the target device. This feature is enabled only if Pin 24 of the microcontroller is not tied to ground. The pin is normally pulled high and controlled by jumper JP10. Jumper JP10 not installed: the CDC device is enabled Jumper JP10 installed: the CDC device is disabled 3.2.12.3 Hardware DBGU The USART3 is used as a DBGU port. 21 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 DBGU DBGU_USART3 VCC_3V3 R520 U38 C360 C361 3 4.7uF 100nF 23 C362 100nF 1 0R 19 R512 0R 5 7 8 9 RS232_TXD 1 10 11 12 RS232_RXD C1C2+ V- C2- SD C3+ EN C3- T1IN T2IN T3IN 2 JP24 C1+ GND V+ C365 100nF 21 R435 VCC R1OUT R2OUT R3OUT T1OUT T2OUT T3OUT R1IN R2IN R3IN 6 C363 100nF J24 20 2 1 6 2 7 3 8 4 9 5 C364 100nF 4 24 C366 100nF 22 18 17 16 15 14 13 (RTS) (TXD) 11 0R 10 Figure 3-18. L50 220ohm 1 2 (CTS) (RXD) EARTH_RS232 ADM3312EARU Reserve for RTS/CTS test Users can switch between DBGU and CDC by setting JP19 and JP20 (see Figure 3-17). Jumper JP19 and JP20 1-2 pins: Hardware DBGU is enabled Jumper JP19 and JP20 2-3 pins: CDC is enabled (default status) 3.2.13 Expansion Ports 3.2.13.1 I/O Expansion Interface One 60-pin header (J19) is provided on the board to allow for the PIO connection of various expansion cards. Due to multiplexing, different signals can be routed to each pin. Figure 3-19. I/O Expansion EXP I/F J19A 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 CONN-3x20 J19C J19B EXP_PB0 EXP_PB2 EXP_PB6 EXP_PB7 EXP_PB8 EXP_PB9 EXP_PB10 EXP_PB12 EXP_PB13 HDMI_RST_PB15 EXP_PB16 EXP_PB17 EXP_PB21 EXP_PB22 EXP_PB24 EXP_PB25 EXP_PB27 EXP_PB28 EXP_PB31 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 VCC_3V3 ADTRG_PE31 EXP_PA24 EXP_PA25 EXP_PC4 EXP_PD8 EXP_PD30 EXP_PD31 LED_USER_PE8 CONN-3x20 PMIC_IRQ_PE0 G0_IRQ_PE1 G1_IRQ_PE2 HDMI_IRQ_PE3 AUDIO_IRQ_PE4 MCI0_CD_PE5 MCI1_CD_PE6 EXP_PE7 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 LED_POWER_PE9 PB_USER1_PE13 USBA_EN5V_PE10 USBB_EN5V_PE11 USBC_EN5V_PE12 EXP_PE14 MCI1_PWR_PE15 DBGU_RXD3_PE16 DBGU_TXD3_PE17 EXP_PE18 EXP_PE19 EXP_PE20 EXP_PE21 EXP_PE22 EXP_PE23 LCD_PE24 LCD_PE25 RXD4_PE26 TXD4_PE27 CONN-3x20 3.2.13.2 LCD Interface Two connectors (J9, J10) are provided on the board to interface the LCD and the touchscreen module. SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 22 Figure 3-20. LCD Expansion LCD/TSC J9 VCC_3V3 LCD_PE24 LCD_TWCK0_PA31 R260 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 0R LCD_DAT3_PA3 LCD_DAT5_PA5 LCD_DAT7_PA7 LCD_DAT11_PA11 LCD_DAT13_PA13 LCD_DAT15_PA15 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 R454 0R LCD_PE25 LCD_TWD0_PA30 LCD_DAT21_PA21 LCD_DAT19_PA19 LCD_DAT20_PA20 LCD_DAT18_PA18 LCD_DAT2_PA2 LCD_DAT4_PA4 LCD_DAT6_PA6 LCD_DAT10_PA10 LCD_DAT12_PA12 LCD_DAT14_PA14 ESW-115-33-L-D 5V_LCD J10 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 LCD_DAT22_PA22 LCD_DAT0_PA0 LCD_DAT8_PA8 LCD_DAT16_PA16 LCD_DISP_PA25 LCD_VSYNC_PA26 LCD_DEN_PA29 AD0_XP AD2_YP AD4_LR R235 R228 R222 0R 0R 0R LCD_SPI1_SO LCD_SPI1_CLK EN_PWRLCD RXD4_PE26 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 LCD_DAT23_PA23 LCD_DAT1_PA1 LCD_DAT9_PA9 LCD_DAT17_PA17 LCD_PWM_PA24 LCD_HSYNC_PA27 LCD_PCK_PA28 R236 R229 0R 0R AD1_XM AD3_YM 1Wire_PE28 LCD_SPI1_SI LCD_SPI1_CS2 LCD_DETECT# TXD4_PE27 ESW-120-33-L-D 3.2.13.3 ISI Interface Figure 3-21. ISI Expansion ISI VCC_3V3 L48 ISI_RST_PB11 ISI_TWCK0_PA31 ISI_D1 ISI_D3 ISI_D5 ISI_D7 ISI_D9 ISI_D11 220ohm 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 J15 TSW-115-07-L-D 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 R327 22R ISI_PWD_PB5 ISI_TWD0_PA30 ISI_MCK_PC4 (PCK1) ISI_VSYNC_PB3 ISI_HSYNC_PB4 ISI_PCK_PB1 ISI_D0 ISI_D2 ISI_D4 ISI_D6 ISI_D8 ISI_D10 3.2.13.4 XPro Interface Figure 3-22. XPro Expansion XPRO I/F J11 DNP XPRO_PD28 AD0_XP XPRO_PD10 XPRO_PC2 XPRO_PD29 XPRO_PB29 XPRO_PD16 XPRO_PB14 XPRO_PD11 R245 0R DNP 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 R246 0R AD3_YM XPRO_PD12 XPRO_PC3 XPRO_PD14 XPRO_PB30 XPRO_PD17 XPRO_PD13 XPRO_PD15 VCC_3V3 2X10 header 3.2.14 CONEXANT DAA CX20548 Interface The SAMA5D4X-MB features a smart DAA chip to drive an analog telephone line on RJ11 6P4C port (J13). 23 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 CX20548 Serial Modem 0805 L26 220ohm 6.81M D4 TEST RAC PWR AVDD TAC 1 4 MMBD3004S-7-F 2 J3 MJM0606GE06-H C107 470pF 3 16 RXI 6 R23 237K C15 DIBN 1 1 Q4 MMBAT42 9 DAA_GND 8 Q1 MMBAT42 1 7 1 Q3 MMBAT42 1 2 TXF 1 100R 3 EIF TXO R35 R215 280R 1% 1206 C14 10nF 3 DIBP C52 150pF 10 DVDD GPIO 13 EP 17 3 VC C45 100nF R219 280R 1% 1206 R196 280R 1% 1206 R204 280R 1% 1206 2 EIO 3 14 C53 150pF 2 47n 100V 4 1 0R RJ11 DAA_GND Q5 MMBAT42 2 R54 TB3100M-13-F 100nF C46 47pF SMD_DIBP_PE29 C106 470pF 3 2 0R C44 6.81M 2 R55 SMD_DIBN_PE30 11 DAA_GND DAA_GND TX1 LAN0066-50 L25 220ohm DAA_GND 0805 R24 EIC R232,R237 Reserve for EMI D3 MMBD3004S-7-F 1 2 5 C123 100nF 3 15 2 C124 100nF 1 2 3 4 5 6 D2 2 12 1 R32 MN5 3 Figure 3-23. R31 3.01R 1% CX20548-11Z R22 110R DAA_GND C33 100nF R27 3.01R 1% R23,C15 should be placed near Pin6(RXI), and should be no vias on the RXI Net. R15 9R1 1% 1206 DAA_GND DAA_GND 3.2.15 Audio Interface The SAMA5D4X-MB includes a WOLFSON WM8904 CODEC for input and output of digital sound. This interface includes audio jacks for MIC input (J16) and Headphone line output (J17). Figure 3-24. Audio DAC Interface 3V3_AUDIO 3V3_AUDIO L33 120 Ohm C252 4.7uF HEADPHONE 0R R160 0R AUDIO_GND CPVDD DCVDD 15 13 AUDIO_GND 14 20R_1% 20R_1% AUDIO_GND C83 C84 100nF DNP 100nF DNP C82 4.7uF 18 16 17 20 25 R316 2.2K MIC 5 L34 3 2 4 STEREO_3.5mm J16 1 C257 470pF L35 80 Ohm C248 80 Ohm C258 470pF 27 R317 2.2K C249 R323 47K DNP R321 47K DNP 1uF 1uF R299 0R AUDIO_GND C81 4.7uF 21 7 23 3V3_AUDIO R139 1.5K_1% DNP SDA SCLK HPOUTFB MCLK BCLK/GPIO4 LRCLK ADCDAT DACDAT MICBIAS IRQ/GPIO1 28 29 30 31 32 1 AUDIO_INT R137 0R 22R AUDIO_PCK2_PB10 AUDIO_TK0_PB27 AUDIO_RK0_PB26 AUDIO_RF0_PB30 AUDIO_TF0_PB31 AUDIO_RD0_PB29 AUDIO_TD0_PB28 AUDIO_IRQ_PE4 IN1R/DMICDAT2 IN1L/DMICDAT1 CPCA VMIDC CPCB CPVOUTP R300 0R 24 26 AUDIO_TWD0_PA30 AUDIO_TWCK0_PA31 33pF R128 LINEOUTR LINEOUTL LINEOUTFB R147 1.5K_1% DNP 3 2 DNP C77 IN2R IN2L WM8904 DGND PAD DNP R158 DNP R159 HPOUTL 5 33 AUDIO_GND HPOUTR 19 MN8 4 R324 20R_1% AVDD C259 100nF R325 20R_1% DBVDD C260 100nF MICVDD C261 470pF AGND C262 470pF 1 22 4 STEREO_3.5mm J17 C254 4.7uF 6 R161 80 Ohm CPVDD 80 Ohm L36 DCVDD L37 AVDD_1V8 2 CPGND 3 C251 100nF CPVOUTN 8 C87 2.2uF 10 11 12 C89 2.2uF C88 2.2uF 9 5 C253 100nF 1V8_AUDIO AVDD_1V8 L19 120 Ohm AUDIO_GND AUDIO_GND AUDIO_GND C85 4.7uF C256 100nF C247 1nF AUDIO_GND AUDIO_GND CPVDD L20 C86 4.7uF 120 Ohm R154 0R R155 0R R156 0R C255 100nF AUDIO_GND VCC_1V8 DCVDD R157 0R C246 2.2uF C250 100nF AUDIO_GND 3.2.16 Video Interface The SAMA5D4-MB provides three on-board connectors to connect: a display module with capacitive touchscreen and QTouch (TM7000), an ISI module SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 24 3.2.16.1 LCD Connector J9 Table 3-3. HE10 Female LCD 2x15pts LCD Pin Number LCD VDD3V3 1 2 GND VDD3V3 3 4 GND - 5 6 - TWCK0 7 8 TWD0 GND 9 10 LCDDAT21 GND 11 12 LCDDAT19 GND 13 14 LCDDAT20 GND 15 16 LCDDAT18 GND 17 18 LCDDAT2 LCDDAT3 19 20 LCDDAT4 LCDDAT5 21 22 LCDDAT6 LCDDAT7 23 24 LCDDAT10 LCDDAT11 25 26 LCDDAT12 LCDDAT13 27 28 LCDDAT14 LCDDAT15 29 30 GND 3.2.16.2 LCD/TSC Connector J10 Table 3-4. HE10 Female LCD/TSC 2x20 pts LCD 25 Pin Number LCD 5V 5V_LCD 1 2 GND GND 5V 5V_LCD 3 4 GND GND LCDDAT22 - 5 6 - LCDDAT23 LCDDAT0 - 7 8 - LCDDAT1 LCDDAT8 - 9 10 - LCDDAT9 LCDDAT16 - 11 12 - LCDDAT17 GND GND 13 14 GND GND LCDDISP - 15 16 - LCDPWM LCDCSYNC - 17 18 - LCDHSYNC LCDDEN - 19 20 - LCDPCK GND GND 21 22 GND GND AD0_XP TSC 23 24 TSC AD1_XM AD2_YP TSC 25 26 TSC AD3_YM AD4_LR TSC 27 28 - 1-WIRE GND GND 29 30 GND GND SPI1_MISO - 31 32 - SPI1_MOSI SPI1_SPCK - 33 34 - SPI1_NPCS0 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 Table 3-4. HE10 Female LCD/TSC 2x20 pts (Continued) LCD Pin Number LCD EN_PWRLCD - 35 36 LCD_DETECT LCD_DETECT# - - 37 38 - - GND GND 39 40 GND GND 3.2.16.3 ISI Connector J15 Table 3-5. HE10 Female ISI 2x15 pts ISI Pin Number ISI VDDISI 1 2 GND VDDISI 3 4 GND ISI_RST 5 6 ISI_PWD TWCK0 7 8 TWD0 GND 9 10 ISI_MCK GND 11 12 ISI_VSYNC GND 13 14 ISI_HSYNC GND 15 16 ISI_PCK GND 17 18 ISI_D0 ISI_D1 19 20 ISI_D2 ISI_D3 21 22 ISI_D4 ISI_D5 23 24 ISI_D6 ISI_D7 25 26 ISI_D8 ISI_D9 27 28 ISI_D10 ISI_D11 29 30 GND 3.2.16.4 HDMI Transmitter Interface (SiI9022ACUN) Compliance: HDMI 1.2a, Simply HD, DVI 1.0 Digital Video Output: Integrated TMDS core DTV resolution support - 480i/576i/ 480p/576p/720p/1080i/1080p PC resolution support - VGA/XGA/SXGA/WSXGA/UXGA Flexible interface to HD MPEG decoders ̶ 12/24-bit RGB YCbCr 4:4:4 ̶ 16/20/24-bit YCbCr 4:2:2 ̶ 8/10/12-bit YCbCr 4:2:2 (ITU-R BT.601 & BT.656) Integrated YCbCr to RGB conversion 4:2:2 to 4:4:4 up-converter Digital Audio Output: DVD-Audio support through four I2S inputs Supports 2-channel 192 kHz or 8-channel 96 kHz SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 26 Supports IEC60958 2-channel PCM or IEC61937 compressed audio (Dolby Digital, DTS, etc.) Industry-standard S/PDIF input Integrated MCLK generator Power Management: 1.2V and 1.8V cores that provide low-power operation Flexible power-down modes Figure 3-25. HDMI Interface VCC_5V F1 D7 1812L160/12 RB160M-60 1 2 Type A connector C90 HDMI_IRQ_PE3 3V3_HDMI 2.2k R114 R163 2.2k 3V3_HDMI R331 HDMI_TWD0_PA30 HDMI_TWCK0_PA31 R162 2.2k J18 HDM19SW-4-1R-H 100nF HDMI_HPD 0R R286 G2 G4 HDMI_DAT 4.7k 35 34 33 51 R107 10k 45 44 41 40 39 37 HDMI_TK0_PB27 HDMI_TF0_PB31 HDMI_TD0_PB28 (PCK0) HDMI_MCK_PD8 38 R85 48 49 EXT_SWING 0R 36 AVCC_1 AVCC_2 AGND_1 AGND_2 IOVCC18_1 IOVCC18_2 IOVCC18_3 SiI9022ACUN D13 D12 TVS TVS TVS 0R L15 DNP SIL_TD0+ SIL_TD0- 65 64 SIL_TD1+ SIL_TD1- 68 67 SIL_TD2+ SIL_TD2- SIL_TCK- 4 3 HDMI_TCK- HDMI_TCK- SIL_TCK+ 1 2 HDMI_TCK+ HDMI_TCK+ HDMI_TD0- NCMS20C900 R312 0R R311 HDMI_TD0+ HDMI_TD1- 0R HDMI_TD1+ HDMI_TD2- L16 DNP 56 R115 4.3K_1% Close to PIN56 1V2_HDMI SIL_TD0- 4 3 HDMI_TD0- SIL_TD0+ 1 2 HDMI_TD0+ HDMI_TD2+ 60 66 C181 C177 C184 C238 C239 1n 1n 1n 1n 100nF C182 100nF C188 100nF 60 OHM C60 10uF C59 10uF 57 63 69 R309 0R L17 DNP R289 1k IO_SEL: LOW=3.3V HIGH=1.8V 3 21 46 3V3_HDMI L11 VCC_3V3 SIL_TD1- 4 3 HDMI_TD1- SIL_TD1+ 1 2 HDMI_TD1+ NCMS20C900 R308 0R 60 OHM C229 100nF C234 100nF C61 10uF C211 100nF R307 0R L18 DNP SCLK LRCLK I2S0 I2S1 I2S2 I2S3 MCLK D14 47k NCMS20C900 R310 0R VSYNC HSYNC DE RESETN SPDIF 62 61 SIL_TCK+ SIL_TCK- L10 CLK T1 59 58 G1 G3 1 2 54 52 HPD INT DDCSDA DDCSCL TX2+ TX2- IO_SEL 22 HDMI_VSYNC_PA26 HDMI_HSYNC_PA27 HDMI_DEN_PA29 HDMI_RST_PB15 TX1+ TX1- Close to SiI902x HDMI_PCK_PA28 3V3_HDMI TX0+ TX0- L12 ePAD VDDQ TMODE DNP R313 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 R330 TXC+ TXC- CVCC12_1 CVCC12_2 CVCC12_3 CVCC12_4 CVCC12_5 CVCC12_6 CGND 5 12 26 42 47 53 1V2_HDMI SIL_TD2- 4 3 HDMI_TD2- SIL_TD2+ 1 2 HDMI_TD2+ 60 OHM C231 100nF C232 100nF C233 100nF C221 100nF C205 100nF C226 100nF NCMS20C900 R306 0R C62 10uF 43 MN9 RClamp0514M 73 70 55 1k D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 CEC_A CEC_D 32 31 30 29 28 27 25 24 23 20 19 18 17 16 15 14 13 11 10 9 8 7 6 4 HDMI_DAT0_PA0 HDMI_DAT1_PA1 HDMI_DAT2_PA2 HDMI_DAT3_PA3 HDMI_DAT4_PA4 HDMI_DAT5_PA5 HDMI_DAT6_PA6 HDMI_DAT7_PA7 HDMI_DAT8_PA8 HDMI_DAT9_PA9 HDMI_DAT10_PA10 HDMI_DAT11_PA11 HDMI_DAT12_PA12 HDMI_DAT13_PA13 HDMI_DAT14_PA14 HDMI_DAT15_PA15 HDMI_DAT16_PA16 HDMI_DAT17_PA17 HDMI_DAT18_PA18 HDMI_DAT19_PA19 HDMI_DAT20_PA20 HDMI_DAT21_PA21 HDMI_DAT22_PA22 HDMI_DAT23_PA23 R75 MN7 71 50 HDMI_SCL LOW:72h(Defult) 72 4.7k DNP 4.7k SCL SDA R111 R112 CI2CA 3V3_HDMI HDMI_TD0+ HDMI_TD0- To keep TMDS pair impedance maintain at 100 ohm , pls share common choke pad with shunted resistor HDMI_TCK+ HDMI_TCK- 6 7 8 9 10 LINE4 NC4 GND LINE2 NC3 NC2 LINE3 VCC NC1 LINE1 5 4 3 2 1 HDMI_TD0+ HDMI_TD0- 5 4 3 2 1 HDMI_TD2+ HDMI_TD2- HDMI_TCK+ HDMI_TCK- MN11 RClamp0514M HDMI_TD2+ HDMI_TD2HDMI_TD1+ HDMI_TD1- 3.2.17 Analog I/O 3.2.17.1 Analog Reference Figure 3-26. Analog Reference VCC_5V 1 VDDANA JP22 2 3V 1 C368 100nF R6 1.6k 3 ADC_VREF C369 3 2.2uF 2 U6 LM4040BIM3-3.0+T 3.2.17.2 Analog Input One 10 kΩ multiturn potentiometer R48 is connected to an analog input. 27 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 6 7 8 9 10 LINE4 NC4 GND LINE2 NC3 NC2 LINE3 VCC NC1 LINE1 HDMI_TD1+ HDMI_TD1- Figure 3-27. Analog Input ADC INPUT VCC_3V3 R519 0R 5 3 P2 10k 2 4 ADC_INPUT C130 10nF 1 T13 PC31/AD4/PWMH1 0R R86 ADC_INPUT SAMA5D44 3.2.18 1-Wire EEPROM (DS28EC20) The SAMA5D4X-MB uses a 1-wire device as a “soft label” to store information such as chip type, manufacturer name, production date, etc. The DS28EC20 is a 20480-bit 1-Wire® EEPROM. It is organized as 80 memory pages of 256 bits each. An additional page is set aside for control functions. Data is written to a 32-byte scratchpad, verified, and then copied to the EEPROM memory. As a special feature, blocks of eight memory pages can be write protected or put in EPROM-Emulation mode, where bits can only be changed from a 1 to a 0 state. The DS28EC20 communicates over the single-conductor 1Wire bus. The communication follows the standard 1-Wire protocol. Each device has its own unalterable and unique 64-bit ROM registration number that is factory-lasered into the chip. The registration number is used to address the device in a multidrop 1-Wire net environment. Figure 3-28. 1-Wire EEPROM VCC_3V3 R278 1.5k 1 Wire ROM U23 1Wire_PE28 2 3 I/O GND NC1 NC2 NC3 NC4 1 4 5 6 DS28EC20P 3.2.19 Miscellaneous IO 3.2.19.1 Discrete LEDs Indicators on the main board include discrete LEDs: One blue LED connected to a PIO One green LED connected to a PIO (shared with the 1-wire) One power red LED connected to a MOS. SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 28 Figure 3-29. Debug Discrete LEDs LED VCC_3V3 D8 Green 1Wire_PE28 R164 470R 2 R333 470R 2 R328 100k 1 D10 HSMB-C170 LED_USER_PE8 LED_POWER_PE9 1 1 R332 470R 2 D9 Red 3 Q7 2 1 IRLML2502TR 3.2.19.2 Pushbuttons and Switch The SAMA5D4X-MB is equipped with three system pushbuttons and one user pushbutton. The push buttons are directly mounted to the board. When any switch is pressed, a low level (zero) is applied to the associated input pin. The pushbuttons are as follows: System pushbuttons: ̶ Force Wake Up ̶ Reset, perform system reset ̶ Disable boot User pushbutton: ̶ User pushbutton on GPIO Figure 3-30. Pushbuttons VCC_3V3 MN12 PB1 R374 C287 100nF DNP R353 SHDN PWRHLD R117 0R 0R C290 10nF 2 EP 0R R51 Q9 BSN20 VCC 2 4 JP6 C263 2 C57 100nF U20 VCC 2 5 4 NAND_CEn 100nF 3 49.9K_1% GND NL17SZ126DFT2G PB2 PB_USER1 29 SPI Flash CS PB3 C288 100nF DNP NAND_NCS3 R146 1CS_NPCS0 2 GND 1 VDDREF 5 NL17SZ126DFT2G DIS_BOOT 3 R354 100K AT25_SPI0_NCPS0 3 1 1K U19 1 33 SMD TP26 Wake up R352 49.9K_1% 0R C58 100nF R53 10K nPBIN GA 9 GP1 GP2 GP3 Reset 29 28 14 PB4 R526 ACT8865QI305-T SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 PB_USER1_PE13 NAND Flash CS 4. PIO Usage and Interface Connectors 4.1 Power Supply Figure 4-1. Power Supply Connector J4 Table 4-1. Pin 1 4.2 Power Supply Connector J4 Signal Description Mnemonic Signal Description Center +5V 2 GND 3 Floating JTAG/ICE Connector Figure 4-2. JTAG J23 Table 4-2. Pin JTAG/ICE Connector J23 Signal Descriptions Mnemonic Signal Description 1 VTref 3.3V power This is the target reference voltage. It is used to check if the target has power, to create the logic-level reference for the input comparators, and to control the output logic levels to the target. It is normally fed from VDD on the target board and must not have a series resistor. 2 Vsupply 3.3V power This pin is not connected in SAM-ICE™. It is reserved for compatibility with other equipment. Connect to VDD or leave open in target system. 3 nTRST Target Reset - Active-low output signal that resets the target. JTAG Reset. Output from SAM-ICE to the Reset signal on the target JTAG port. Typically connected to nTRST on the target CPU. This pin is normally pulled High on the target to avoid unintentional resets when there is no connection. 4 GND Common ground 5 TDI Test Data Input - Serial data output line, sampled on the rising edge of the TCK signal. JTAG data input of target CPU. It is recommended that this pin is pulled to a defined state on the target board. Typically connected to TDI on target CPU. SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 30 Table 4-2. Pin Mnemonic Signal Description GND Common ground 7 TMS Test Mode Select. JTAG mode set input of target CPU. This pin should be pulled up on the target. Typically connected to TMS on target CPU. Output signal that sequences the target's JTAG state machine, sampled on the rising edge of the TCK signal. 8 GND Common ground 9 TCK Test Clock - Output timing signal, for synchronizing test logic and control register access. JTAG clock signal to target CPU. It is recommended that this pin is pulled to a defined state on the target board. Typically connected to TCK on target CPU. 10 GND Common ground 11 RTCK - Input Return Test Clock signal from the target. Some targets must synchronize the JTAG inputs to internal clocks. To assist in meeting this requirement, a returned and resynchronized TCK can be used to dynamically control the TCK rate. SAM-ICE supports adaptive clocking which waits for TCK changes to be echoed correctly before making further changes. Connect to RTCK if available, otherwise to GND. 12 GND Common ground 13 TDO JTAG Test Data Output Serial data input from the target. JTAG data output from target CPU. Typically connected to TDO on target CPU. 14 GND Common ground 15 nSRST RESET Active-low reset signal. Target CPU reset signal. 16 GND Common ground 17 RFU This pin is not connected in SAM-ICE. 18 GND Common ground 19 RFU This pin is not connected in SAM-ICE. 20 GND Common ground 6 31 JTAG/ICE Connector J23 Signal Descriptions (Continued) SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 4.3 USB Type A Dual Port Figure 4-3. USB Type A Dual Port J5 Table 4-3. USB Type A Dual Port J5 Signal Descriptions Pin Mnemonic Signal Description A1 Vbus - USB_A 5V power A2 DM - USB_A Data minus A3 DP - USB_A Data plus A4 GND Common ground B1 Vbus - USB_A 5V power B2 DM - USB_A Data minus B3 DP - USB_A Data plus B4 GND Common ground Mechanical pins 4.4 Shield USB Micro-AB Figure 4-4. USB Host/Device MicroAB Connector J1 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 32 Table 4-4. Pin 4.5 Mnemonic Signal Description 1 Vbus 5V power 2 DM Data minus 3 DP Data plus 4 ID On-the-go identification 5 GND Common ground JLINK-OB USB MicroAB Figure 4-5. USB JLINK-OB MicroAB Connector J22 Table 4-5. Pin 4.6 USB JLINK-OB Micro-AB Connector J22 Signal Descriptions Mnemonic Signal description 1 Vbus 5V power 2 DM Data minus 3 DP Data plus 4 ID On the Go Identification 5 GND Common ground HDMI Connector Figure 4-6. 33 USB Host/Device Micro AB Connector J1 Signal Descriptions HDMI Type A Female Connector J18 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 Table 4-6. HDMI Type A Female Connector J18 Signal Descriptions LCD 4.7 Pin Number LCD TMDS Data 2+ 1 2 TMDS Data 2 Shield TMDS Data 2- 3 4 TMDS Data 1+ TMDS Data 1 Shield 5 6 TMDS Data 1- TMDS Data 0+ 7 8 TMDS Data 0 Shield TMDS Data 0- 9 10 TMDS Clock + TMDS Clock Shield 11 12 TMDS Clock - NC 13 14 NC SCL 15 16 SDA GND 17 18 +5V Hot Plug Detect 19 RS232 Connector with RTS/CTS Handshake Support Figure 4-7. USART1 Connector J24 Table 4-7. Pin USART Connector J24 Signal Descriptions Mnemonic Signal Description - No connection 2 RXD (Received Data) RS232 serial data output signal 3 TXD (Transmitted Data) RS232 serial data input signal 5 GND Common ground 7 RTS (Request To Send) Active-positive RS232 input signal 8 CTS (Clear To Send) Active-positive RS232 output signal - Shield 1, 4, 6, 9 Mechanical pins SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 34 4.8 DAA RJ11 Socket (6P4C) Figure 4-8. DAA RJ11 Socket J3 Table 4-8. Pin Number DAA RJ11 Socket J3 Signal Descriptions Mnemonic 1, 2, 5, 6 4.9 No connection 3 RAC RING side of ordinary telephone line 4 TAC TIP side of ordinary telephone line SD/MMC Plus MCI0 Figure 4-9. SD Socket J20 Table 4-9. Pin Number 35 Signal Description SD Socket J20 Signal Descriptions Mnemonic Signal Description 1 DAT3 Data bit 2 CMD Command line 3 VSS Command line 4 VCC Supply voltage 3.3V 5 CLK Clock / command line 6 CD Card detect 7 DAT0 Data bit 8 DAT1 Data bit 9 DAT2 Data bit 10 DAT4 Data bit SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 Table 4-9. Pin Number 4.10 SD Socket J20 Signal Descriptions (Continued) Mnemonic Signal Description 11 DAT5 Data bit 12 DAT6 Data bit 13 DAT7 Data bit 14 WP Protect 15 Common ground 16 Common ground MicroSD MCI1 Figure 4-10. MicroSD Socket J14 Table 4-10. Pin Number MicroSD Socket J14 Signal Descriptions Mnemonic Signal Description 1 DAT2 Data bit 2 2 CD/DAT3 Card detect / data bit 3 3 CMD Command line 4 VCC Supply voltage 3.3V 5 CLK Clock / command line 6 VSS Common ground 7 DAT0 Data bit 0 8 DAT1 Data bit 1 9 SW1 Not used, grounded 10 CARD DETECT Card detect 11 Common ground 12 Common ground 13 Common ground 14 Common ground SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 36 4.11 Ethernet ETH0/ETH1 RJ45 Socket J6/J7 Figure 4-11. 4.12 Ethernet Standard RJ45 Socket J6/J7 XPro Socket Figure 4-12. XPro Socket J11 Table 4-11. XPro Socket J11 Signal Descriptions EXT1 XPRO (20-pin Male Right-Angle Header) MCU Function MCU Pin Name Name MCU Pin MCU Function ID PD28 ID 1 2 GND - - AD0_XP PC27 ADC(+) 3 4 ADC(-) PC30 AD3/YM CTS0 PD10 GPIO 5 6 GPIO PD12 RXD0 PWMH3 PC2 PWM(+) 7 8 PWM(-) PC3 PWML3 FIQ PD29 IRQ/GPIO 9 10 SPI_SS_B/GPIO PD14 CTS1 TWD2 PB29 TWI_SDA 11 12 TWI_SCL PB30 TWCK2 RXD1 PD16 UART_RX 13 14 UART_TX PD17 TXD1 SPI2_NPCS1 PB14 SPI_SS_A 15 16 SPI_MOSI PD13 SPI2_MOSI SPI2_MISO PD11 SPI_MISO 17 18 SPI_SCK PD15 SPI2_SPCK - - GND 19 20 VCC 3v3 - - 37 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 Pin Number 4.13 LCD Socket Figure 4-13. LCD Socket J9 Table 4-12. LCD Socket J9 HE10 Female LCD 2x15 pts LCD 4.14 Pin Number LCD VDD3V3 1 2 GND VDD3V3 3 4 GND LCD_PE24 5 6 LCD_PE25 TWCK0 7 8 TWD0 GND 9 10 LCDDAT15 GND 11 12 LCDDAT13 GND 13 14 LCDDAT14 GND 15 16 LCDDAT12 GND 17 18 LCDDAT0 LCDDAT1 19 20 LCDDAT2 LCDDAT3 21 22 LCDDAT4 LCDDAT5 23 24 LCDDAT6 LCDDAT7 25 26 LCDDAT8 LCDDAT9 27 28 LCDDAT10 LCDDAT11 29 30 GND LCD/TSC Socket Figure 4-14. LCD/TSC Socket J10 Table 4-13. LCD/TSC Socket J10 HE10 Female LCD/TSC/QT 2x20p LCD Pin Number LCD 5V 5V_LCD 1 2 GND GND 5V 5V_LCD 3 4 GND GND LCDDAT16 - 5 6 - LCDDAT17 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 38 Table 4-13. LCD/TSC Socket J10 HE10 Female LCD/TSC/QT 2x20p (Continued) LCD 4.15 Pin Number LCDDAT18 - 7 8 - LCDDAT19 LCDDAT20 - 9 10 - LCDDAT21 LCDDAT22 - 11 12 - LCDDAT23 GND GND 13 14 GND GND LCDDISP - 15 16 - LCDPWM LCDCSYNC - 17 18 - LCDHSYNC LCDDEN - 19 20 - LCDPCK GND GND 21 22 GND GND AD0_XP TSC 23 24 TSC AD1_XM AD2_YP TSC 25 26 TSC AD3_YM AD4_LR TSC 27 28 - ONE_WIRE GND1 GND 29 30 GND GND SPI1_MISO - 31 32 - SPI1_MOSI SPI1_SPCK - 33 34 - SPI1_NPCS3 EN_PWRLCD - 35 36 LCD_DETECT LCD_DETECT# - PE26 37 38 PE27 - GND GND 39 40 GND GND ISI Socket Figure 4-15. ISI Socket J15 Table 4-14. ISI Socket J15 HE10 Female ISI 2x15p ISI 39 LCD Pin Number ISI VDDISI 1 2 GND VDDISI 3 4 GND ISI_RST 5 6 ISI_PWD TWCK0 7 8 TWD0 GND 9 10 ISI_MCK GND 11 12 ISI_VSYNC GND 13 14 ISDI_HSYNC GND 15 16 ISI_PCK GND 17 18 ISI_D0 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 Table 4-14. ISI Socket J15 HE10 Female ISI 2x15p (Continued) ISI Pin Number ISI ISI_D1 19 20 ISI_D2 ISI_D3 21 22 ISI_D4 ISI_D5 23 24 ISI_D6 ISI_D7 25 26 ISI_D8 ISI_D9 27 28 ISI_D10 ISI_D11 29 30 GND SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 40 4.16 PIO Usage 4.16.1 PIO Pin Assignment and Signal Description Table 4-15. PIO A Pin Assignment and Signal Description Signal Peripheral A PA0 LCDDAT0 PA1 LCDDAT1 PA2 LCDDAT2 G1_TXCK LCDDAT2 PA3 LCDDAT3 G1_RXCK LCDDAT3 PA4 LCDDAT4 G1_TXEN LCDDAT4 PA5 LCDDAT5 G1_TXER LCDDAT5 PA6 LCDDAT6 G1_CRS LCDDAT6 PA7 LCDDAT7 PA8 LCDDAT8 PA9 LCDDAT9 G1_COL LCDDAT9 PA10 LCDDAT10 G1_RXDV LCDDAT10 G1_RXDV PA11 LCDDAT11 G1_RXER LCDDAT11 G1_RXER PA12 LCDDAT12 G1_RX0 LCDDAT12 G1_RX0 PA13 LCDDAT13 G1_RX1 LCDDAT13 G1_RX1 PA14 LCDDAT14 G1_TX0 LCDDAT14 G1_TX0 PA15 LCDDAT15 G1_TX1 LCDDAT15 G1_TX1 PA16 LCDDAT16 PA17 LCDDAT17 PA18 LCDDAT18 G1_RX2 LCDDAT18 PA19 LCDDAT19 G1_RX3 LCDDAT19 PA20 LCDDAT20 G1_TX2 LCDDAT20 PA21 LCDDAT21 G1_TX3 LCDDAT21 PA22 LCDDAT22 G1_MDC LCDDAT22 G1_MDC PA23 LCDDAT23 G1_MDIO LCDDAT23 G1_MDIO PA24 LCDPWM PCK0 LCDPWM PA25 LCDDISP TD0 LCDDISP PA26 LCDVSYNC PWMH0 SPI1_NPCS1 LCDVSYNC PA27 LCDHSYNC PWML0 SPI1_NPCS2 LCDHSYNC PA28 LCDPCK PWMH1 SPI1_NPCS3 LCDPCK PA29 LCDDEN PWML1 PA30 TWD0 TWD0 PA31 TWCK0 TWCK0 41 Peripheral B Peripheral C SAMA5-MB TMS LCDDAT0 LCDDAT1 G1_TXCK G1_TXEN LCDDAT7 TCK NTRST LCDDAT8 LCDDAT16 LCDDAT17 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 LCDDEN Table 4-16. PIO B Pin Assignment and Signal Description Signal Peripheral A PB0 G0_TXCK PB1 G0_RXCK PB2 G0_TXEN PB3 G0_TXER CTS2 ISI_VSYNC ISI_VSYNC PB4 G0_CRS RXD2 ISI_HSYNC ISI_HSYNC PB5 G0_COL TXD2 PCK2 ISI_PWD PB6 G0_RXDV G0_RXDV PB7 G0_RXER G0_RXER PB8 G0_RX0 G0_RX0 PB9 G0_RX1 G0_RX1 PB10 G0_RX2 PCK2 PWML1 PCK2 PB11 G0_RX3 RTS2 PWMH1 ISI_RST PB12 G0_TX0 G0_TX0 PB13 G0_TX1 G0_TX1 PB14 G0_TX2 SPI2_NPCS1 PWMH0 PB14 PB15 G0_TX3 SPI2_NPCS2 PWML0 HDMI_RST PB16 G0_MDC G0_MDC PB17 G0_MDIO G0_MDIO PB18 SPI1_MISO D8 SPI1_MISO PB19 SPI1_MOSI D9 SPI1_MOSI PB20 SPI1_SPCK D10 SPI1_SPCK PB21 SPI1_NPCS0 D11 PB22 SPI1_NPCS1 D12 PB23 SPI1_NPCS2 D13 PB24 DRXD D14 TDI TDI PB25 DTXD D15 TDO TDO PB26 PCK0 RK0 PWMH0 RK0 PB27 SPI1_NPCS3 TK0 PWML0 TK0 PB28 SPI2_NPCS3 TD0 PWMH1 TD0 PB29 TWD2 RD0 PWML1 RD0 PB30 TWCK2 RF0 RF0 TF0 TF0 PB31 Peripheral B Peripheral C SAMA5-MB G0_TXCK SCK2 ISI_PCK ISI_PCK G0_TXEN SPI1_NPCS0 SPI1_NPCS1 SPI1_NPCS2 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 42 Table 4-17. 43 PIO C Pin Assignment and Signal Description Signal Peripheral A Peripheral B Peripheral C PC0 SPI0_MISO PWMH2 ISI_D8 SPI0_MISO ISI_D8 PC1 SPI0_MOSI PWML2 ISI_D9 SPI0_MOSI ISI_D9 PC2 SPI0_SPCK PWMH3 ISI_D10 SPI0_SPCK ISI_D10 PC3 SPI0_NPCS0 PWML3 ISI_D11 SPI0_NPCS0 ISI_D11 PC4 SPI0_NPCS1 MCI0_CK PCK1 PC5 D0 MCI0_CDA D0 MCI0_CDA PC6 D1 MCI0_DA0 D1 MCI0_DA0 PC7 D2 MCI0_DA1 D2 MCI0_DA1 PC8 D3 MCI0_DA2 D3 MCI0_DA2 PC9 D4 MCI0_DA3 D4 MCI0_DA3 PC10 D5 MCI0_DA4 D5 MCI0_DA4 PC11 D6 MCI0_DA5 D6 MCI0_DA5 PC12 D7 MCI0_DA6 D7 MCI0_DA6 PC13 NRD/NANDOE MCI0_DA7 NRD/NANDOE MCI0_DA7 PC14 NWE/NANDW E NWE/NANDWE PC15 NCS3 NCS3 PC16 NANDRDY NANDRDY PC17 A21/NANDALE A21/NANDALE PC18 A22/NANDCLE A22/NANDCLE PC19 ISI_D0 TK1 ISI_D0 PC20 ISI_D1 TF1 ISI_D1 PC21 ISI_D2 TD1 ISI_D2 PC22 ISI_D3 RF1 ISI_D3 PC23 ISI_D4 RD1 ISI_D4 PC24 ISI_D5 RK1 PCK1 ISI_D5 PC25 ISI_D6 TWD3 URXD1 ISI_D6 PC26 ISI_D7 TWCK3 UTXD1 ISI_D7 PC27 AD0 SPI0_NPCS1 PWML0 AD0 PC28 AD1 SPI0_NPCS2 PWML1 AD1 PC29 AD2 SPI0_NPCS3 PWMFI0 AD2 PC30 AD3 PWMH0 AD3 PC31 AD4 PWMH1 AD4 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 SAMA5-MB MCI0_CK Table 4-18. Signal PIO D Pin Assignment and Signal Description Peripheral A Peripheral B Peripheral C SAMA5-MB PD1 PD2 PD3 PD4 PD5 PD6 PD7 PD8 PCK0 PCK0 PD9 FIQ PD10 CTS0 CDETA PD10 PD11 RTS0 SPI2_MISO PD11 PD12 RXD0 DCENA PD12 PD13 TXD0 SPI2_MOSI PD13 PD14 CTS1 CDETB PD14 PD15 RTS1 SPI2_SPCK PD15 PD16 RXD1 DCENB PD16 PD17 TXD1 SPI2_NPCS0 PD17 OVCUR_USB PD18 SENSE0 PD19 SENSE1 PD20 SENSE2 PD21 SENSE3 PD22 SENSE4 PD23 SENSE5 PD24 SENSE6 PD25 SENSE7 PD26 SENSE8 PD27 SENSE9 PD28 SCK0 PD28 PD29 SCK1 DIS SPI0_NPCS2 PCK1 PD29 PD30 PD31 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 44 Table 4-19. 45 PIO E Pin Assignment and Signal Description Signal Peripheral A Peripheral B Peripheral C PE0 A0/NBS0 MCI0_CDB CTS4 PE1 A1 MCI0_DB0 INT_ETH0 PE2 A2 MCI0_DB1 INT_ETH1 PE3 A3 MCI0_DB2 INT_HDMI PE4 A4 MCI0_DB3 INT_AUDIO PE5 A5 CTS3 CD_MCI0 PE6 A6 TIOA3 CD_MCI1 PE7 A7 TIOB3 PWMFI1 PE8 A8 TCLK3 PWML3 PE9 A9 TIOA2 POWER_LED PE10 A10 TIOB2 EN5V_USBA PE11 A11 TCLK2 EN5V_USBB PE12 A12 TIOA1 PWMH2 EN5V_USBC PE13 A13 TIOB1 PWML2 PB_USER1 PE14 A14 TCLK1 PWMH3 PE15 A15 SCK3 TIOA0 PE16 A16 RXD3 TIOB0 RXD3 PE17 A17 TXD3 TCLK0 TXD3 PE18 A18 TIOA5 MCI1_CK MCI1_CK PE19 A19 TIOB5 MCI1_CDA MCI1_CDA PE20 A20 TCLK5 MCI1_DA0 MCI1_DA0 PE21 A23 TIOA4 MCI1_DA1 MCI1_DA1 PE22 A24 TIOB4 MCI1_DA2 MCI1_DA2 PE23 A25 TCLK4 MCI1_DA3 MCI1_DA3 PE24 NCS0 RTS3 PE25 NCS1 SCK4 IRQ PE25 PE26 NCS2 RXD4 A18 RXD4 PE27 NWR1/NBS1 TXD4 PE28 NWAIT RTS4 A19 1-WIRE PE29 DIBP URXD0 TWD1 DIBP PE30 DIBN UTXD0 TWCK1 DIBN PE31 ADTRG SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 SAMA5-MB INT_PMIC USER_LED1 PWR_MCI1 PE24 TXD4 PE31 4.16.2 IO Expansion Port Figure 4-16. IO Expansion Socket J19 Table 4-20. 46 IO Expansion Socket J19 Signal Descriptions Signal Pin Number Signal Pin Number Signal Pin Number PB0 1 VCC3V3 21 PE9 41 PB2 2 VCC3V3 22 PE10 42 PB6 3 PE31 23 PE11 43 PB7 4 PA24 24 PE12 44 PB8 5 PA25 25 PE13 45 PB9 6 PC4 26 PE14 46 PB10 7 PD8 27 PE15 47 PB12 8 PD30 28 PE16 48 PB13 9 PD31 29 PE17 49 PB15 10 - 30 PE18 50 GND 11 GND 31 GND 51 PB16 12 PE0 32 PE19 52 PB17 13 PE1 33 PE20 53 PB21 14 PE2 34 PE21 54 PB22 15 PE3 35 PE22 55 PB24 16 PE4 36 PE23 56 PB25 17 PE5 37 PE24 57 PB27 18 PE6 38 PE25 58 PB28 19 PE7 39 PE26 59 PB31 20 PE8 40 PE27 60 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 5. Schematics This section contains the following schematics: “Block diagram” “PIO Assignment” “Power supply” “MPU - Power” “MPU - PIOA, PIOE” “MPU - PIOB, PIOD, SYS” “DDR2 - I” “DDR2 - II” “MPU - PIOC, Flash” “MCI” “USB” “ETH0” “ETH1” “DAA” “HDMI” “AUDIO” “DBGU - SAM3U” “LCD, ISI I/F” “EXT - CON, Buttons, LED” SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 47 Block diagram 5 4 3 2 1 D Sheet 15 SMD PMIC part 3V3, 2V, 1V8, 1V2 ADC ref, input MODEM Interface SAMA5D44 Sheet 8,9 Sheet 5 U17, U16: 8 bit devices mounted (optional: 16 bit devices) Power part Sheet 7 U34, U35: 8 bit devices mounted (optional: not mounted when U16, U17 are 16 bit devices) PIOB, D,SYS Sheet 6 Sheet 16 PIOA, E Sheet 10 HDMI 5V IN Sheet 4 DDR2 HDMI TYPE A CONN PIOC Sheet 8 DDR2 CTL Sheet 17 FLASH AUDIO Sheet 10 C NAND FLASH C HEADPHONE JACK MIC IN JACK SPI FLASH DBUG Sheet 18 MMC SD Sheet 11 MCI0: SD/MMCPlus card DBGU, RS232 DB9 Sheet 19 LCD/TSC CONN ISI CONN USB A, B, C B Power SW Sheet 20 MISC USB B Segger SAM3U JLINK-OB MCI1: Micro SD card Sheet 12 Sheet 13,14 Ethernet SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 D LCD ISI 48 Figure 5-1. EXP, XPRO CONN PUSH BUTTON, LED ETH0 ETH1 A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 4 3 2 1 XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX VER. DATE REV. SHEET E Block Diagram 5 X.X X.X X.X X.X X.X 2 20 49 Figure 5-2. PIO Assignment 5 4 3 2 1 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 PIO Muxing & Jumper setting USAGE PIOA D USAGE PIOB USAGE PIOB USAGE PIOC USAGE PIOC EXP I/F 3X20 LCDDAT0/TMS PA16 LCDDAT16/NTRST PB0 G0_TXCK/EXP PB16 G0_MDC/EXP PC0 AT25_SPI0_SO/ISI_D8 PC16 NANDRDY PA1 LCDDAT1 PA17 LCDDAT17 PB1 ISI_PCK PB17 G0_MDIO/EXP PC1 AT25_SPI0_SI/ISI_D9 PC17 NAND_ALE 1 PB0 21 VCC_3V3 41 PE9 PA2 LCDDAT2/G1_TXCK PA18 LCDDAT18 PB2 G0_TXEN/EXP PB18 LCD_SPI1_SO PC2 SPCK/ISI_D10/PWMH3 PC18 NAND_CLE 2 PB2 22 VCC_3V3 42 PE10 PA3 LCDDAT3 PA19 LCDDAT19 PB3 ISI_VSYNC PB19 LCD_SPI1_SI PC3 NCPS0/ISI_D11/PWML3 PC19 ISI_D0 3 PB6 23 ADTRG_PE31 43 PE11 PA4 LCDDAT4/G1_TXEN PA20 LCDDAT20 PB4 ISI_HSYNC PB20 LCD_SPI1_CLK PC4 MCI0_CK/ISI_MCK/EXP PC20 ISI_D1 4 PB7 24 PA24 44 PE12 PA5 LCDDAT5 PA21 LCDDAT21 PB5 ISI_PWD PB21 EXP PC5 MCI0_CDA/NAND_IO0 PC21 ISI_D2 5 PB8 25 PA25 45 PE13 PA6 LCDDAT6 PA22 LCDDAT22/G1_MDC PB6 G0_RXDV/EXP PB22 EXP PC6 MCI0_DA0/NAND_IO1 PC22 ISI_D3 6 PB9 26 PC4 46 PE14 PA7 LCDDAT7 PA23 LCDDAT23/G1_MDIO PB7 G0_RXER/EXP PB23 LCD_SPI1_NPCS2 PC7 MCI0_DA1/NAND_IO2 PC23 ISI_D4 7 PB10 27 PD8 47 PE15 PA8 LCDDAT8/TCK PA24 LCDPWM/EXP PB8 G0_RX0/EXP PB24 TDI/EXP PC8 MCI0_DA2/NAND_IO3 PC24 ISI_D5 8 PB12 28 PD30 48 PE16 PA9 LCDDAT9 PA25 LCDDISP/EXP PB9 G0_RX1/EXP PB25 TDO/EXP PC9 MCI0_DA3/NAND_IO4 PC25 ISI_D6 9 PB13 29 PD31 49 PA10 LCDDAT10/G1_RXDV PA26 LCDVSYNC PB10 AUDIO_PCK2/EXP PB26 AUDIO_RK0 PC10 MCI0_DA4/NAND_IO5 PC26 ISI_D7 10 PB15 30 NC 50 PE18 PA11 LCDDAT11/G1_RXER PA27 LCDHSYNC PB11 ISI_RST PB27 AUDIO/HDMI_TK0/EXP PC11 MCI0_DA5/NAND_IO6 PC27 AD0_XP 11 GND 31 GND 51 GND PA12 LCDDAT12/G1_RX0 PA28 LCDPCK PB12 G0_TX0/EXP PB28 AUDIO/HDMI_TD0/EXP PC12 MCI0_DA6/NAND_IO7 PC28 AD1_XM 12 PB16 32 PE0 52 PE19 PA13 LCDDAT13/G1_RX1 PA29 LCDDEN PB13 G0_TX1/EXP PB29 AUDIO_RD0/XPRO_TWD2 PC13 MCI0_DA7/NAND_RE PC29 AD2_YP 13 PB17 33 PE1 53 PE20 PA14 LCDDAT14/G1_TX0 PA30 TWD0 PB14 XPRO_SPI2_NPCS1 PB30 AUDIO_RF/XPRO_TWCK2 PC14 NWE/NANDWE PC30 AD3_YM 14 PB21 34 PE2 54 PE21 PA15 LCDDAT15/G1_TX1 PA31 TWCK0 PB15 HDMI_RST PB31 AUDIO/HDMI_TF0/EXP PC15 NAND_NCS3 PC31 AD4_LR/ADC_INPUT 15 PB22 35 PE3 55 PE22 16 PB24 36 PE4 56 PE23 17 PB25 37 PE5 57 PE24 18 PB27 38 PE6 58 PE25 19 PB28 39 PE7 59 PE26 20 PB31 40 PE8 60 PE27 USAGE PIOD USAGE USAGE PIOD USAGE PIOE PD16 XPRO_RXD1_PD16 PE0 PMIC_IRQ PE16 DBGU_RXD3 PD17 XPRO_NPCS0_TXD1 PE1 G0_IRQ PE17 DBGU_TXD3 C PIOE PD18 NC PE2 G1_IRQ PE18 MCI1_CK/EXP PD19 NC PE3 HDMI_IRQ PE19 MCI1_CDA/EXP PD20 NC PE4 AUDIO_IRQ PE20 MCI1_DA0/EXP PD21 NC PE5 MCI0_CD PE21 MCI1_DA1/EXP PD22 NC PE6 MCI1_CD PE22 MCI1_DA2/EXP PD23 NC PE7 EXP PE23 MCI1_DA3/EXP XPRO I/F 2X10 SCK0 1 2 GND AD0 3 4 AD3 CTS0 5 6 RXD0 PWMH3 7 8 PWML3 SCK1 9 10 CTS1 TWD2 11 12 TWCK2 RXD1 13 14 TXD1 SPI2_NPCS1 15 16 SPI2_MOSI SPI2_MISO 17 18 SPI2_SPCK GND 19 20 VCC_3V3 EXP_PCK0 PD24 NC PE8 LED_USER PE24 LCD_PE24 PD9 USB_OVCUR_PD9 PD25 NC PE9 LED_POWER PE25 LCD_PE25 PD10 XPRO_CTS0 PD26 NC PE10 EN5V_USBA PE26 RXD4 PD11 XPRO_MISO_RTS0 PD27 NC PE11 EN5V_USBB PE27 TXD4 PD12 XPRO_RXD0 PD28 SCK0 PE12 EN5V_USBC PE28 1-WIRE PD13 XPRO_MOSI_TXD0 PD29 SCK1 PE13 PB_USER1 PE29 DIBP PD14 XPRO_CTS1 PD30 EXP PE14 EXP PE30 DIBN PART PD15 XPRO_SPCK_RTS1 PD31 EXP PE15 MCI1_PWR PE31 USBA_VBUS/ADTRG JP2 OPEN LCD Power enable; ETH1 disable JP3 CLOSE 5V output enable for USB-A JP5 CLOSE SD/MMC Card write protection selection JP6 OPEN SPI Flash Selection JP7 OPEN PIOBU3 connect to GND selection JP8 OPEN PIOBU0 connect to PIOBU1 selection JP10 OPEN JLINK-OB CDC enable JP11 OPEN JLINK-OB JTAG enable 1-2(Def) SAM3U power by on board VCC_3V3 VCC_5V 1 2 GND VCC_3V3 1 ISI 2x15 2 GND VCC_3V3 1 VCC_3V3 3 2 GND DEFAULT FUNCTION B VCC_5V 3 4 GND 4 GND 4 GND LCDDAT22 5 6 LCDDAT23 GPIO_PE24 5 6 GPIO_PE25 ISI_RST 5 6 ISI_PWD 2-3 SAM3U power by USB VBUS LDO LCDDAT0 7 8 LCDDAT1 TWCK0 7 8 TWD0 TWCK0 7 8 TWD0 JP13 CLOSE VDDBU_2V LCDDAT8 9 10 LCDDAT9 GND 9 10 LCDDAT21 GND 9 10 ISI_MCK JP14 CLOSE VCC_5V LCDDAT16 11 12 LCDDAT17 GND 11 12 LCDDAT19 GND 11 12 ISI_VSYNC JP15 CLOSE VDDIODDR_MPU GND 13 14 GND GND 13 14 LCDDAT20 GND 13 14 ISI_HSYNC JP16 CLOSE VDDCORE LCDDISP 15 16 LCDPWM GND 15 16 LCDDAT18 GND 15 16 ISI_PCK JP17 CLOSE 1V2_HDMI LCDVSYNC 17 18 LCDHSYNC GND 17 18 LCDDAT2 GND 17 18 ISI_D0 JP18 CLOSE LCDDEN 19 20 LCDPCK LCDDAT3 19 20 LCDDAT4 ISI_D1 19 20 ISI_D2 GND 21 22 GND LCDDAT5 21 22 LCDDAT6 ISI_D3 21 22 ISI_D4 AD0_XP 23 24 AD1_XM LCDDAT7 23 24 LCDDAT10 ISI_D5 23 24 ISI_D6 AD2_YP 25 26 AD3_YM LCDDAT11 25 26 LCDDAT12 ISI_D7 25 26 ISI_D8 AD4_LR 27 28 1-WIRE LCDDAT13 27 28 LCDDAT14 ISI_D9 27 28 ISI_D10 GND LCDDAT15 29 30 GND ISI_D11 29 30 GND 29 30 GND SPI1_MISO 31 32 SPI1_MOSI SPI1_SPCK 33 34 SPI1_NPCS2 EN_PWRLCD 35 36 LCD_DETECT RXD4 37 38 TXD4 GND 39 40 GND VCC_3V3 3 PE17 JUMPER DESCRIPTION LCD 2x15 LCD/TSC 2x20 JP12 JP19,JP20 JP21 JP22 JP24 VCC_3V3 2-1 DBGU to RS232 2-3(Def) DBGU to JLINK-OB CDC OPEN Enable DBGU 2-1(Def) ADC_VREF connect to VDDANA 2-3 ADC_VREF connect to 3V OPEN For CTS,RTS usage A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 4 3 2 X.X X.X X.X X.X X.X 1 XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX VER. DATE REV. SHEET E PIO Muxing & Jumper setting 5 D C PD8 B A USAGE PIOA PA0 3 20 50 Figure 5-3. Power supply 5 4 3 2 1 5V/2A Input 2 3 1 U40 ZEN056V230A16LS 3 R334 1K D VCC_5V U25 1 7 1 C105 100nF 2 C101 1uF 6 2 IN IN_pad 4 5 3 OUT1 OUT2 FLAG + C5 33uF EN GND C103 100nF D VCC_5V VDDANA 1 NCP349MNAETBG JP22 2 VCC_3V3 R6 1.6K 3V 1 C368 100nF 3 ADC_VREF C369 3 2.2uF U31 2 8 VCC_2V VDD 1 VOUT 4 0R 1 VBAT 7 RESET# 4 6 3 C183 100nF R255 PFI MR# GND PFO# C185 100nF C186 1uF 5 2 VIN VOUT VDDBU_2V JP13 2 3 1 U6 LM4040BIM3-3.0+T 2 U32 J12 CE C191 1uF GND NCP4682DSQ20T1G ADC INPUT TPS3619-33 VCC_3V3 VCC_1V8 C R373 VCC_5V 1R JP14 C273 4.7uF C276 4.7uF MN12 31 26 16 C277 4.7uF 18 25 VCC_3V3 VCC_2V R195 10K 23 R209 10K WKUP PMIC_IRQ_PE0 NRST_3V3 R339 0R 20 R340 0R 17 R341 0R 13 R342 330R 12 R343 0R 11 10 PWRHLD R345 R347 PMIC_TWCK0_PA31 PMIC_TWD0_PA30 21 22 0R 0R 32 PB4 C271 2.2uF ACT8865QI305-T C285 47nF Reset 9 VP1 VP2 VP3 INL45 INL67 SW1 OUT1 NC1 NC2 Wake up C287 100nF DNP R353 SHDN R117 VDDREF R146 0R C263 0R L42 27 24 L44 C274 10uF C278 10uF SW2 OUT2 C279 10uF C280 10uF 2 2.2uH SW3 OUT3 L40 L43 VDDIOP 180 Ohm L45 VDDIOM 180 Ohm L46 VDDUTMII 180 Ohm 1V2_HDMI 1 C281 10uF VCC_3V3 2 2.2uH C282 10uF nRSTO C283 10uF 1 VDDANA FUSE_2V5 OUT4 OUT5 REFBP OUT6 nPBIN (2V5) 4 (3V3) 7 (1V8) 8 33 R346 0R R429 0R R348 VCC_3V3 0R L47 10uH_150mA 1V8_AUDIO B 3V3_AUDIO R349 1R_1% R521 4.7K NRST_3V3 VOUT7 C286 4.7uF EP GP1 GP2 GP3 3 ADC_INPUT C130 10nF RESET C284 100nF PWRHLD SCL SDA P2 10K 2 4 JP18 nIRQ 2 1 1 nPBSTAT 15 19 3 5 VDDCORE 2 2.2uH PWREN R352 49.9K_1% C267 4.7uF C268 4.7uF C270 4.7uF R522 68K C269 4.7uF NRST_2V R523 110k 3 Q9 BSN20 1 1K C290 10nF A VDDIODDR JP16 30 1 R519 0R 180 Ohm L41 JP17 VSEL GA SMD TP26 R374 PWRHLD C272 2.2uF 1 5 6 VDDREF OUT7 PB1 VDDIODDR_MPU JP15 2 1 2 B C VDDREF C289 1uF 29 28 14 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 SW1 SDKTA20100 J4 DC POWER JACK 1 3 2 R354 100K 2 C288 100nF DNP 100nF 49.9K_1% A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 4 3 2 1 XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX VER. DATE REV. SHEET E Power Supply 5 X.X X.X X.X X.X X.X 4 20 51 Figure 5-4. MPU - Power 4 5 2 3 D VDDCORE U22D VDDBU_2V W4 C244 10uF C245 10uF C241 100nF C240 100nF Power De-coupling capacitors for SAM3U ( page18) C187 22uF 100nF 100nF C349 100nF 100nF C348 C351 100nF C347 VDDUTMI C350 100nF C346 4.7uF C344 100nF 100nF C343 VDDANA C345 100nF C342 100nF C341 VDDBU VCC_3V3_3U C218 100nF C208 100nF C220 100nF C216 100nF C206 100nF C228 100nF C213 100nF C225 1nF C230 1nF C207 1nF C158 100nF C202 100nF C198 100nF C209 100nF C210 100nF C203 100nF C159 100nF C160 100nF C200 100nF C196 100nF J7 K7 K8 L9 N10 J11 L11 VDDIODDR_MPU C142 10uF ADVREF VDDIN G8 N9 C190 10uF C141 10uF E10 E12 H12 K13 M13 C14 F14 D17 H16 K17 VDDIO VDDIOM 0R VDDOUT_3U R254 VDDPLL 100nF C194 100nF C224 100nF C212 100nF N7 M8 R9 P15 VDDIOP C359 100nF 100nF C358 C357 100nF C356 100nF C355 100nF C354 4.7uF C353 C352 100nF C C197 100nF 0R R283 VDDCORE VCCCORE_1V2 L32 VDDUTMII 0R 60 Ohm 60 Ohm C243 100nF C201 100nF C199 100nF C227 100nF L5 K6 M6 H7 C219 100nF R258 VDDUTMIC C214 100nF L14 C242 100nF VDDUTMIC VDDPLLA C54 100nF V13 W13 W17 VDDANA C51 100nF VDDPLLA W10 VDDOSC P14 C9 N11 P12 C76 100nF FUSE_2V5 R14 C56 100nF B VCC_3V3 L13 10uH_150mA C65 100nF TP9 C223 100nF C222 100nF B8 E8 C215 100nF C217 100nF C8 F8 C204 100nF A11 VDDOSC POWER TEST POINTS VCC_5V TP10 TP1 VCC_3V3 TP2 TP4 VDDBU_2V TP7 TP3 VCC_1V8 TP8 VCCCORE_1V2 TP6 FUSE_2V5 TP5 3V3_AUDIO TP11 1V8_AUDIO TP12 VOUT7 R95 1R_1% C67 100nF VDDBU GNDBU C75 100nF VCCCORE_1V2 VDDOUT SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 D 1 C69 100nF GNDCORE_1 GNDCORE_2 GNDCORE_3 GNDCORE_4 GNDCORE_5 GNDCORE_6 GNDCORE_7 GNDCORE_8 GNDCORE_9 GNDCORE_10 GNDCORE_11 GNDCORE_12 GNDCORE_13 GNDCORE_14 GNDCORE_15 GNDCORE_16 VDDCORE_1 VDDCORE_2 VCCCORE_1 VCCCORE_2 VCCCORE_3 VCCCORE_4 VCCCORE_5 VCCCORE_6 VCCCORE_7 VDDIODDR_1 VDDIODDR_2 VDDIODDR_3 VDDIODDR_4 VDDIODDR_5 VDDIODDR_6 VDDIODDR_7 VDDIODDR_8 VDDIODDR_9 VDDIODDR_10 GNDIODDR_1 GNDIODDR_2 GNDIODDR_3 GNDIODDR_4 GNDIODDR_5 GNDIODDR_6 GNDIODDR_7 GNDIODDR_8 GNDIODDR_9 GNDIODDR_10 VDDIOM_1 VDDIOM_2 VDDIOM_3 VDDIOM_4 GNDIOM_1 GNDIOM_2 GNDIOM_3 GNDIOM_4 VDDIOP_1 VDDIOP_2 VDDIOP_3 VDDIOP_4 GNDIOP_1 GNDIOP_2 GNDIOP_3 GNDIOP_4 W1 H8 J8 L8 D9 F9 M9 B10 D10 L10 M10 K11 M11 J12 L12 V18 W18 F10 E11 G11 C13 J13 L13 G14 C17 G17 K18 C M7 N8 P9 M12 G6 J6 L6 N6 VDDUTMIC VDDUTMII_1 VDDUTMII_2 GNDUTMI VDDPLLA GNDPLL VDDOSC GNDOSC VDDANA_1 VDDANA_2 VDDANA_3 GNDANA_1 GNDANA_2 VDDFUSE GNDFUSE GNDIOP_5 GNDIOP_6 GNDSC1 GNDIOP_7 GNDIOP_8 GNDSCIO GNDIOP_9 GNDMS P13 L7 GNDUTMI N13 C10 N12 R15 B F7 G7 H11 SAMA5D44 Should ideally be connected directly to GND - see datasheet Table 4-1. BGA361 Pin Description C72 4.7uF R124 0R GNDUTMI TP13 A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 4 3 2 1 XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX VER. DATE REV. SHEET E MPU - POWER 5 X.X X.X X.X X.X X.X 5 20 52 Figure 5-5. MPU - PIOA, PIOE SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 5 4 PA0 R67 R261 R68 22R 22R 22R PA1 R296 R133 22R 22R PA2 R141 R304 R149 22R 22R 22R PA3 R79 R274 22R 22R PA4 R262 R66 R263 22R 22R 22R PA5 R80 R273 22R 22R PA6 R81 R272 22R 22R PA7 R132 R297 22R 22R PA8 R94 R284 R93 22R 22R 22R PA9 R151 R302 22R 22R PA10 R134 R295 R143 22R 22R 22R PA11 R88 R89 R279 22R 22R 22R PA12 R136 R293 R145 22R 22R 22R PA13 R280 R87 R281 22R 22R 22R U22A PA[0..31] D PA0/LCDDAT0/TMS PA1/LCDDAT1 PA2/LCDDAT2/G1_TXCK PA3/LCDDAT3/G1_RXCK PA4/LCDDAT4/G1_TXEN PA5/LCDDAT5/G1_TXER PA6/LCDDAT6/G1_CRS PA7/LCDDAT7 PA8/LCDDAT8/TCK PA9/LCDDAT9/G1_COL PA10/LCDDAT10/G1_RXDV PA11/LCDDAT11/G1_RXER PA12/LCDDAT12/G1_RX0 PA13/LCDDAT13/G1_RX1 PA14/LCDDAT14/G1_TX0 PA15/LCDDAT15/G1_TX1 PA16/LCDDAT16/NTRST PA17/LCDDAT17 PA18/LCDDAT18/G1_RX2 PA19/LCDDAT19/G1_RX3 PA20/LCDDAT20/G1_TX2 PA21/LCDDAT21/G1_TX3 PA22/LCDDAT22/G1_MDC PA23/LCDDAT23/G1_MDIO PA24/LCDPWM/PCK0 PA25/LCDDISP/TD0 PA26/LCDVSYNC/PWMH0/SPI1_NPCS1 PA27/LCDHSYNC/PWML0/SPI1_NPCS2 PA28/LCDPCK/PWMH1/SPI1_NPCS3 PA29/LCDDEN/PWML1 PA30/TWD0 PA31/TWCK0 A7 F6 E6 C6 D6 B6 A6 E5 A5 F4 F5 D5 G5 C5 E4 B5 H6 D4 G4 C4 A3 B4 B3 A4 H5 F3 E3 H4 G3 J5 D3 J4 2 3 PA0 PA1 PA2 PA3 PA4 PA5 PA6 PA7 PA8 PA9 PA10 PA11 PA12 PA13 PA14 PA15 PA16 PA17 PA18 PA19 PA20 PA21 PA22 PA23 PA24 PA25 PA26 PA27 PA28 PA29 PA30 PA31 SAMA5D44 C U22H B PE0/A0/NBS0/MCI0_CDB/CTS4 PE1/A1/MCI0_DB0 PE2/A2/MCI0_DB1 PE3/A3/MCI0_DB2 PE4/A4/MCI0_DB3 PE5/A5/CTS3 PE6/A6/TIOA3 PE7/A7/TIOB3/PWMFI1 PE8/A8/TCLK3/PWML3 PE9/A9/TIOA2 PE10/A10/TIOB2 PE11/A11/TCLK2 PE12/A12/TIOA1/PWMH2 PE13/A13/TIOB1/PWML2 PE14/A14/TCLK1/PWMH3 PE15/A15/SCK3/TIOA0 PE16/A16/RXD3/TIOB0 PE17/A17/TXD3/TCLK0 PE18/A18/TIOA5/MCI1_CK PE19/A19/TIOB5/MCI1_CDA PE20/A20/TCLK5/MCI1_DA0 PE21/A23/TIOA4/MCI1_DA1 PE22/A24/TIOB4/MCI1_DA2 PE23/A25/TCLK4/MCI1_DA3 PE24/NCS0/RTS3 PE25/NCS1/SCK4/IRQ PE26/NCS2/RXD4/A18 PE27/NWR1/NBS1/TXD4 PE28/NWAIT/RTS4/A19 PE29/DIBP/URXD0/TWD1 PE30/DIBN/UTXD0/TWCK1 PE31/ADTRG W19 U17 T17 P16 U18 R17 V19 U19 T19 T18 N14 R18 P17 P18 N17 N18 M15 N19 P19 N16 M14 M18 M19 L18 L19 M17 L15 M16 L17 V1 U2 L4 PE18 PE19 PE20 PE21 PE22 PE23 PE31 PMIC_IRQ_PE0 G0_IRQ_PE1 G1_IRQ_PE2 HDMI_IRQ_PE3 AUDIO_IRQ_PE4 MCI0_CD_PE5 MCI1_CD_PE6 EXP_PE7 LED_USER_PE8 LED_POWER_PE9 USBA_EN5V_PE10 USBB_EN5V_PE11 USBC_EN5V_PE12 PB_USER1_PE13 EXP_PE14 MCI1_PWR_PE15 DBGU_RXD3_PE16 DBGU_TXD3_PE17 HDMI_DAT0_PA0 LCD_DAT0_PA0 TMS HDMI_DAT1_PA1 LCD_DAT1_PA1 HDMI_DAT2_PA2 LCD_DAT2_PA2 G1_TXCK_PA2 HDMI_DAT3_PA3 LCD_DAT3_PA3 HDMI_DAT4_PA4 LCD_DAT4_PA4 G1_TXEN_PA4 1 PA14 R142 R303 R150 22R 22R 22R PA15 R92 R285 R104 22R 22R 22R PA16 R135 R294 R144 22R 22R 22R PA17 R105 R288 22R 22R 22R 22R PA18 R301 R152 HDMI_DAT5_PA5 LCD_DAT5_PA5 PA19 R106 R287 22R 22R HDMI_DAT6_PA6 LCD_DAT6_PA6 PA20 R298 R131 22R 22R HDMI_DAT7_PA7 LCD_DAT7_PA7 PA21 R292 R119 22R 22R PA22 R148 R305 R140 22R 22R 22R PA23 R121 R291 R120 22R 22R 22R PA26 R355 R356 22R 22R PA27 R357 R358 22R 22R PA28 R359 R360 22R 22R PA29 R361 R362 22R 22R PA24 R314 R315 22R 22R PA25 R153 R456 22R 22R HDMI_DAT8_PA8 LCD_DAT8_PA8 TCK HDMI_DAT9_PA9 LCD_DAT9_PA9 HDMI_DAT10_PA10 LCD_DAT10_PA10 G1_RXDV_PA10 HDMI_DAT11_PA11 LCD_DAT11_PA11 G1_RXER_PA11 HDMI_DAT12_PA12 LCD_DAT12_PA12 G1_RX0_PA12 HDMI_DAT13_PA13 LCD_DAT13_PA13 G1_RX1_PA13 HDMI_DAT14_PA14 LCD_DAT14_PA14 G1_TX0_PA14 HDMI_DAT15_PA15 LCD_DAT15_PA15 G1_TX1_PA15 HDMI_DAT16_PA16 LCD_DAT16_PA16 NTRST D HDMI_DAT17_PA17 LCD_DAT17_PA17 HDMI_DAT18_PA18 LCD_DAT18_PA18 HDMI_DAT19_PA19 LCD_DAT19_PA19 HDMI_DAT20_PA20 LCD_DAT20_PA20 HDMI_DAT21_PA21 LCD_DAT21_PA21 HDMI_DAT22_PA22 LCD_DAT22_PA22 G1_MDC_PA22 HDMI_DAT23_PA23 LCD_DAT23_PA23 G1_MDIO_PA23 HDMI_VSYNC_PA26 LCD_VSYNC_PA26 HDMI_HSYNC_PA27 LCD_HSYNC_PA27 C HDMI_PCK_PA28 LCD_PCK_PA28 HDMI_DEN_PA29 LCD_DEN_PA29 LCD_PWM_PA24 EXP_PA24 LCD_DISP_PA25 EXP_PA25 VCC_3V3 TWI0 LCD_PE24 LCD_PE25 RXD4_PE26 TXD4_PE27 1Wire_PE28 SMD_DIBP_PE29 SMD_DIBN_PE30 PE18 R457 R458 22R 22R PE19 R459 R460 22R 22R PE20 R461 R462 22R 22R PE21 R463 R464 22R 22R PE22 R465 R466 22R 22R PE23 R467 R468 22R 22R PE31 R518 0R R322 1K MCI1_CK_PE18 EXP_PE18 MCI1_CDA_PE19 EXP_PE19 PA30 MCI1_DA0_PE20 EXP_PE20 MCI1_DA1_PE21 EXP_PE21 PA31 MCI1_DA2_PE22 EXP_PE22 R326 1K R363 R364 R436 R437 22R 22R 22R 22R R251 22R R365 R366 R438 R439 R256 22R 22R 22R 22R 22R HDMI_TWD0_PA30 LCD_TWD0_PA30 ISI_TWD0_PA30 PMIC_TWD0_PA30 AUDIO_TWD0_PA30 B HDMI_TWCK0_PA31 LCD_TWCK0_PA31 ISI_TWCK0_PA31 PMIC_TWCK0_PA31 AUDIO_TWCK0_PA31 MCI1_DA3_PE23 EXP_PE23 USBA_VBUS_PE31 ADTRG_PE31 SAMA5D44 A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 4 3 2 1 XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX VER. DATE REV. SHEET E MPU - PIOA, PIOE 5 X.X X.X X.X X.X X.X 6 20 53 Figure 5-6. MPU - PIOB, PIOD, SYS 5 4 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 U22E PB0/G0_TXCK PB1/G0_RXCK/SCK2/ISI_PCK PB2/G0_TXEN PB3/G0_TXER/CTS2/ISI_VSYNC PB4/G0_CRS/RXD2/ISI_HSYNC PB5/G0_COL/TXD2/PCK2 PB6/G0_RXDV PB7/G0_RXER PB8/G0_RX0 PB9/G0_RX1 PB10/G0_RX2/PCK2/PWML1 PB11/G0_RX3/RTS2/PWMH1 PB12/G0_TX0 PB13/G0_TX1 PB14/G0_TX2/SPI2_NPCS1/PWMH0 PB15/G0_TX3/SPI2_NPCS2/PWML0 PB16/G0_MDC PB17/G0_MDIO PB18/SPI1_MISO/D8 PB19/SPI1_MOSI/D9 PB20/SPI1_SPCK/D10 PB21/SPI1_NPCS0/D11 PB22/SPI1_NPCS1/D12 PB23/SPI1_NPCS2/D13 PB24/DRXD/D14/TDI PB25/DTXD/D15/TDO PB26/PCK0/RK0/PWMH0 PB27/SPI1_NPCS3/TK0/PWML0 PB28/SPI2_NPCS3/TD0/PWMH1 PB29/TWD2/RD0/PWML1 PB30/TWCK2/RF0 PB31/TF0 D ADCVREF C3 A2 B2 C2 J3 H2 G2 H3 F2 J2 F1 K4 D2 K3 A1 E2 B1 K5 K2 C1 D1 L3 G1 H1 E1 J1 M5 L2 K1 M3 M4 L1 PB0 ISI_RST_PB11 PB12 PB13 XPRO_PB14 HDMI_RST_PB15 PB16 PB17 LCD_SPI1_SO LCD_SPI1_SI LCD_SPI1_CLK EXP_PB21 EXP_PB22 LCD_SPI1_CS2 22R PB24 PB25 PB26 PB27 PB28 PB29 PB30 PB31 R12 22R 22R PB2 R471 R472 22R 22R PB6 R473 R474 22R 22R G0_RXDV_PB6 EXP_PB6 PB7 R475 R476 22R 22R G0_RXER_PB7 EXP_PB7 PB8 R477 R478 22R 22R G0_RX0_PB8 EXP_PB8 PB9 R479 R480 22R 22R G0_RX1_PB9 EXP_PB9 PB10 R481 R482 22R 22R PB12 R483 R484 22R 22R PB13 R485 R486 22R 22R PB16 R487 R488 22R 22R PB17 R490 R491 22R 22R PB24 R492 R493 22R 22R PB25 R494 R495 22R 22R PB26 R496 DNP 22R PB29 R499 R500 22R 22R PB30 R501 R502 22R 22R PB27 R503 R504 R505 22R 22R 22R PB28 R506 R507 R508 22R 22R 22R PB31 R509 R510 R511 22R 22R 22R 1 G0_TXCK_PB0 EXP_PB0 G0_TXEN_PB2 EXP_PB2 U22G PD8/PCK0 PD9/FIQ PD10/CTS0/CDETA PD11/RTS0/SPI2_MISO PD12/RXD0/DCENA PD13/TXD0/SPI2_MOSI PD14/CTS1/CDETB PD15/RTS1/SPI2_SPCK PD16/RXD1/DCENB PD17/TXD1/SPI2_NPCS0 PD18/SENSE0 PD19/SENSE1 PD20/SENSE2 PD21/SENSE3 PD22/SENSE4 PD23/SENSE5 PD24/SENSE6 PD25/SENSE7 PD26/SENSE8 PD27/SENSE9 PD28/SCK0 PD29/SCK1 PD30 PD31/SPI0_NPCS2/PCK1 AUDIO_PCK2_PB10 EXP_PB10 G0_TX0_PB12 EXP_PB12 G0_TX1_PB13 EXP_PB13 G0_MDC_PB16 EXP_PB16 G0_MDIO_PB17 EXP_PB17 M1 M2 N2 N3 N1 P3 P2 N4 R2 R3 T9 P11 T10 P10 U11 R10 U10 R11 U13 T14 R1 P1 N5 P5 PD8 USB_OVCUR_PD9 XPRO_PD10 XPRO_PD11 XPRO_PD12 XPRO_PD13 XPRO_PD14 XPRO_PD15 XPRO_PD16 XPRO_PD17 R489 D XPRO_PD28 XPRO_PD29 EXP_PD30 EXP_PD31 22R SAMA5D44 TDI EXP_PB24 TDO EXP_PB25 ADC_VREF C68 100nF SAMA5D44 C ISI_VSYNC_PB3 ISI_HSYNC_PB4 ISI_PWD_PB5 PB6 PB7 PB8 PB9 PB10 R118 R469 R470 ISI_PCK_PB1 PB2 2 3 PB0 C (PCK0) AUDIO_RK0_PB26 PD8 R497 R498 22R DNP 22R HDMI_MCK_PD8 EXP_PD8 AUDIO_RD0_PB29 XPRO_PB29 AUDIO_RF0_PB30 XPRO_PB30 AUDIO_TK0_PB27 HDMI_TK0_PB27 EXP_PB27 AUDIO_TD0_PB28 HDMI_TD0_PB28 EXP_PB28 AUDIO_TF0_PB31 HDMI_TF0_PB31 EXP_PB31 B B U22C U1 P4 XIN R76 1M DNP W2 W3 XIN32 XOUT32 Y3 4 1 T2 SHDN 3 2 C64 27pF W12 V12 XIN XOUT XOUT C63 27pF 12MHz WKUP V3 NRST_2V T1 R123 VDDBU_2V 10K DNP V2 W11 XIN32 R97 1M DNP XOUT32 R110 5.62K_1% Y4 A C71 20pF GNDUTMI 32.768KHz C70 20pF C74 10pF A8 A10 E7 E9 B7 D8 C7 A9 D7 B9 TSTANA_BU TST XIN XOUT XIN32 XOUT32 SHDN WKUP NRST JTAGSEL VBG NC_A8 NC_A10 NC_E7 NC_E9 NC_B7 NC_D8 NC_C7 NC_A9 NC_D7 NC_B9 HHSDPC HHSDMC HHSDPB HHSDMB HHSDPA HHSDMA PIOBU0 PIOBU1 PIOBU2 PIOBU3 PIOBU4 PIOBU5 PIOBU6 PIOBU7 PIOBU8 PIOBU9 PIOBU10 PIOBU11 PIOBU12 PIOBU13 PIOBU14 PIOBU15 NC_H10 NC_G10 NC_K10 NC_J10 NC_K9 NC_J9 NC_H9 NC_G9 W16 V16 W15 V15 W14 V14 top/bot top/bot top/bot top/bot top/bot top/bot USBC_DP USBC_DM USBB_DP USBB_DM USBA_DP USBA_DM U3 T3 T4 U4 P6 T5 R4 U5 R5 U6 R6 T6 R7 U7 P7 T7 H10 G10 K10 J10 K9 J9 H9 G9 90 ohms differential trace impedance trace-length mismatch< 3.8mm PIOBU0 PIOBU1 PIOBU3 RR13 5 6 7 8 RR17 5 6 7 8 SAMA5D4X Socket 4 100K 3 2 1 4 100K 3 2 1 A SG-BGA-6033MF DNP SAMA5D44-MB SAMA5D44 E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 4 3 2 1 XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX VER. DATE REV. SHEET E MPU - PIOB, PIOD, SYS 5 X.X X.X X.X X.X X.X 7 20 54 Figure 5-7. DDR2 - I 5 4 3 2 1 VDDIODDR L8 K7 L7 K3 MPU_DDR2_CK+ MPU_DDR2_CKMPU_DDR2_CKEn J8 K8 K2 R230 K9 DDR_VREF DDR_DQS3 DDR_DQSN3 DDR_DQM0 DDR_DQM1 DDR_DQM2 DDR_DQM3 F19 G19 C138 100nF MPU_DDR2_DQS1+ MPU_DDR2_DQS1- VDDIODDR A12 A13 R50 1K_1% R238 100R_1% DNP MPU_DDR2_DM1 C50 100nF R52 1K_1% U16 MPU_DDR2_A0 MPU_DDR2_A1 MPU_DDR2_A2 MPU_DDR2_A3 MPU_DDR2_A4 MPU_DDR2_A5 MPU_DDR2_A6 MPU_DDR2_A7 MPU_DDR2_A8 MPU_DDR2_A9 MPU_DDR2_A10 MPU_DDR2_A11 MPU_DDR2_A12 MPU_DDR2_A13 VDDIODDR C42 100nF C175 100nF C178 100nF C151 100nF C133 100nF C164 100nF C176 100nF C179 100nF C168 100nF C163 100nF C152 100nF C145 100nF C156 100nF C174 100nF C132 100nF C165 1nF L2 L3 L1 MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn L8 K7 L7 K3 MPU_DDR2_CK+ MPU_DDR2_CKMPU_DDR2_CKEn J8 K8 K2 R232 K9 0R J2 J7 J1 C136 100nF C169 1nF M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 R8 MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 C140 100nF VDDIODDR C41 2.2uF A VDDQ1 VDDQ2 VDDQ3 VDDQ4 VDDQ5 VDDQ6 VDDQ7 VDDQ8 VDDQ9 VDDQ10 A1 E1 J9 M9 R1 A9 C1 C3 C7 C9 E9 G1 G3 G7 G9 MPU_DDR2_DQS0+ MPU_DDR2_DQS0MPU_DDR2_DQS1+ MPU_DDR2_DQS1- B3 F3 MPU_DDR2_DM1 MPU_DDR2_DM0 A2 E2 R3 R7 C MT47H128M8CF-25E VDDIODDR MPU_DDR2_DM3 DDR2_VREF C332 2.2uF F7 E8 B7 A8 MPU_DDR2_CK- DDR2_VREF C49 4.7uF NC_A2 NC_E2 RFU_R3 RFU_R7 VREF VSSDL VDDL D MPU_DDR2_CK+ MPU_DDR2_DQS3+ MPU_DDR2_DQS3- L16 MPU_DDR2_DM0 J16 D13 MPU_DDR2_DM2 F12 C48 100nF UDM LDM ODT C144 100nF VDDIODDR L8 10uH_150mA R49 1R_1% UDQS UDQS CK CK CKE A15 MPU_DDR2_DQS2+ A16 MPU_DDR2_DQS2- SAMA5D44 B J2 J7 J1 CS RAS CAS WE MPU_DDR2_DQ0 MPU_DDR2_DQ1 MPU_DDR2_DQ2 MPU_DDR2_DQ3 MPU_DDR2_DQ4 MPU_DDR2_DQ5 MPU_DDR2_DQ6 MPU_DDR2_DQ7 MPU_DDR2_DQ8 MPU_DDR2_DQ9 MPU_DDR2_DQ10 MPU_DDR2_DQ11 MPU_DDR2_DQ12 MPU_DDR2_DQ13 MPU_DDR2_DQ14 MPU_DDR2_DQ15 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A9 C1 C3 C7 C9 E9 G1 G3 G7 G9 DDR_DQS2 DDR_DQSN2 C47 4.7uF 0R LDQS LDQS VDDQ1 VDDQ2 VDDQ3 VDDQ4 VDDQ5 VDDQ6 VDDQ7 VDDQ8 VDDQ9 VDDQ10 DDR_DQS1 DDR_DQSN1 J19 MPU_DDR2_DQS0+ K19 MPU_DDR2_DQS0- BA0 BA1 BA2 G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 VSSQ1 VSSQ2 VSSQ3 VSSQ4 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9 VSSQ10 MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn A7 B8 D2 D8 E7 F2 F8 H2 H8 B2 DQ0-7, DQ16-23, DQ8-15, DQ24-31 L2 L3 L1 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 DQ8 DQ9 DQ10 DQ11 DQ12 DQ13 DQ14 DQ15 BA0 BA1 BA2 LDQS LDQS CS RAS CAS WE UDQS UDQS UDM LDM CK CK CKE ODT NC_A2 NC_E2 RFU_R3 RFU_R7 VREF VSSDL VDDL G8 G2 H7 H3 H1 H9 F1 F9 C8 C2 D7 D3 D1 D9 B1 B9 MPU_DDR2_DQ16 MPU_DDR2_DQ17 MPU_DDR2_DQ18 MPU_DDR2_DQ19 MPU_DDR2_DQ20 MPU_DDR2_DQ21 MPU_DDR2_DQ22 MPU_DDR2_DQ23 MPU_DDR2_DQ24 MPU_DDR2_DQ25 MPU_DDR2_DQ26 MPU_DDR2_DQ27 MPU_DDR2_DQ28 MPU_DDR2_DQ29 MPU_DDR2_DQ30 MPU_DDR2_DQ31 F7 E8 MPU_DDR2_DQS2+ MPU_DDR2_DQS2- B7 A8 MPU_DDR2_DQS3+ MPU_DDR2_DQS3- B3 F3 MPU_DDR2_DM3 MPU_DDR2_DM2 B A2 E2 R3 R7 VSSQ1 VSSQ2 VSSQ3 VSSQ4 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9 VSSQ10 K12 DDR2_VREF DDR_CALN DDR_CALP U17: U16: U34: U35: MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 DDR2_VREF DDR_DQS0 DDR_DQSN0 C19 B19 U34, U35: 8 bit devices mounted (optional: not mounted when U16, U17 are 16 bit devices) A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A7 B8 D2 D8 E7 F2 F8 H2 H8 B2 200R_1% U17, U16: 8 bit devices mounted (optional: 16 bit devices, compatible package) VSS1 VSS2 VSS3 VSS4 VSS5 200R_1% R58 C DDR_BA0 DDR_BA1 DDR_BA2 U17 M8 M3 M7 N2 N8 N3 N7 P2 P8 P3 M2 P7 R2 R8 MPU_DDR2_A0 MPU_DDR2_A1 MPU_DDR2_A2 MPU_DDR2_A3 MPU_DDR2_A4 MPU_DDR2_A5 MPU_DDR2_A6 MPU_DDR2_A7 MPU_DDR2_A8 MPU_DDR2_A9 MPU_DDR2_A10 MPU_DDR2_A11 MPU_DDR2_A12 MPU_DDR2_A13 A3 E3 J3 N1 P9 C15 D14 G13 MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 VDDIODDR R59 DDR_CKE DDR_CS DDR_RAS DDR_CAS DDR_WE MPU_DDR2_DQ0 MPU_DDR2_DQ1 MPU_DDR2_DQ6 MPU_DDR2_DQ4 MPU_DDR2_DQ2 MPU_DDR2_DQ5 MPU_DDR2_DQ3 MPU_DDR2_DQ7 MPU_DDR2_DQ15 MPU_DDR2_DQ9 MPU_DDR2_DQ10 MPU_DDR2_DQ11 MPU_DDR2_DQ14 MPU_DDR2_DQ12 MPU_DDR2_DQ8 MPU_DDR2_DQ13 MPU_DDR2_DQ16 MPU_DDR2_DQ17 MPU_DDR2_DQ18 MPU_DDR2_DQ19 MPU_DDR2_DQ20 MPU_DDR2_DQ21 MPU_DDR2_DQ22 MPU_DDR2_DQ23 MPU_DDR2_DQ24 MPU_DDR2_DQ25 MPU_DDR2_DQ26 MPU_DDR2_DQ27 MPU_DDR2_DQ28 MPU_DDR2_DQ29 MPU_DDR2_DQ30 MPU_DDR2_DQ31 A1 E1 J9 M9 R1 D15 B16 B17 A17 E16 MPU_DDR2_CKEn MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn DDR_CLK DDR_CLKN L14 K16 K15 K14 J18 J17 J15 H19 H18 J14 G18 H17 H15 H14 G16 E19 E14 E13 H13 F13 B15 A14 D12 B14 B13 G12 B12 C12 F11 C11 D11 B11 VDD1 VDD2 VDD3 VDD4 VDD5 A18 A19 MPU_DDR2_CK+ MPU_DDR2_CK- DDR_D0 DDR_D1 DDR_D2 DDR_D3 DDR_D4 DDR_D5 DDR_D6 DDR_D7 DDR_D8 DDR_D9 DDR_D10 DDR_D11 DDR_D12 DDR_D13 DDR_D14 DDR_D15 DDR_D16 DDR_D17 DDR_D18 DDR_D19 DDR_D20 DDR_D21 DDR_D22 DDR_D23 DDR_D24 DDR_D25 DDR_D26 DDR_D27 DDR_D28 DDR_D29 DDR_D30 DDR_D31 VSS1 VSS2 VSS3 VSS4 VSS5 D DDR_A0 DDR_A1 DDR_A2 DDR_A3 DDR_A4 DDR_A5 DDR_A6 DDR_A7 DDR_A8 DDR_A9 DDR_A10 DDR_A11 DDR_A12 DDR_A13 VDD1 VDD2 VDD3 VDD4 VDD5 MPU_DDR2_DQ[0..31] U22B F15 F16 E17 G15 B18 C16 E15 F17 F18 D19 E18 D18 C18 D16 A3 E3 J3 N1 P9 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 MPU_DDR2_A[0..13] MPU_DDR2_A0 MPU_DDR2_A1 MPU_DDR2_A2 MPU_DDR2_A3 MPU_DDR2_A4 MPU_DDR2_A5 MPU_DDR2_A6 MPU_DDR2_A7 MPU_DDR2_A8 MPU_DDR2_A9 MPU_DDR2_A10 MPU_DDR2_A11 MPU_DDR2_A12 MPU_DDR2_A13 MT47H128M8CF-25E A VDDIODDR C40 2.2uF C39 2.2uF C43 100nF C146 100nF C173 100nF C154 100nF C162 100nF C167 100nF C37 100nF C38 100nF C147 100nF C166 100nF C172 100nF C155 100nF C134 100nF C131 100nF C157 100nF C153 1nF C143 1nF SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 4 3 2 1 XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX VER. DATE REV. SHEET E DDR2 - I 5 X.X X.X X.X X.X X.X 8 20 55 Figure 5-8. DDR2 - II 5 4 3 2 1 MPU_DDR2_DQS3+ MPU_DDR2_DQS3MPU_DDR2_DM1 MPU_DDR2_DM3 DDR2_VREF MPU_DDR2_CKEn MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 G2 G3 G1 MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn G8 F7 G7 F3 MPU_DDR2_CK+ MPU_DDR2_CKMPU_DDR2_CKEn E8 F8 F2 R375 F9 0R E2 E7 E1 DDR2_VREF C291 100nF A9 C1 C3 C7 C9 VDDQ6 VDDQ7 VDDQ8 VDDQ9 VDDQ10 VDD2 VDD3 VDD4 VDD5 BA0 BA1 BA2 LDQS LDQS C8 C2 D7 D3 D1 D9 B1 B9 MPU_DDR2_DQ8 MPU_DDR2_DQ9 MPU_DDR2_DQ10 MPU_DDR2_DQ11 MPU_DDR2_DQ12 MPU_DDR2_DQ13 MPU_DDR2_DQ14 MPU_DDR2_DQ15 B7 A8 MPU_DDR2_DQS1+ MPU_DDR2_DQS1- B3 MPU_DDR2_DM1 D CS RAS CAS WE CK CK CKE LDM ODT NC_A2 RFU_L3 RFU_L7 VREF VSSDL VDDL C292 100nF A3 E3 J1 K9 C VDDIODDR DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 A2 L3 L7 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9 MPU_DDR2_DQS1+ MPU_DDR2_DQS1- C A7 B2 B8 D2 D8 D A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 VSS2 VSS3 VSS4 VSS5 MPU_DDR2_CK+ MPU_DDR2_CK- H8 H3 H7 J2 J8 J3 J7 K2 K8 K3 H2 K7 L2 L8 MT47H128M8CF-25E G2 G3 G1 MPU_DDR2_CSn MPU_DDR2_RASn MPU_DDR2_CASn MPU_DDR2_WEn G8 F7 G7 F3 MPU_DDR2_CK+ MPU_DDR2_CKMPU_DDR2_CKEn E8 F8 F2 R376 0R DDR2_VREF VDDIODDR C36 2.2uF C293 100nF VDDIODDR C295 2.2uF C296 100nF C297 100nF C298 100nF C299 100nF C300 100nF C301 100nF C302 100nF C303 100nF C304 100nF C305 100nF C306 100nF C307 100nF C308 100nF C309 100nF C310 100nF C311 1nF F9 E2 E7 E1 C294 100nF C312 1nF A A9 C1 C3 C7 C9 VDDQ6 VDDQ7 VDDQ8 VDDQ9 VDDQ10 VDD2 VDD3 VDD4 VDD5 DQ0 DQ1 DQ2 DQ3 DQ4 DQ5 DQ6 DQ7 C8 C2 D7 D3 D1 D9 B1 B9 MPU_DDR2_DQ24 MPU_DDR2_DQ25 MPU_DDR2_DQ26 MPU_DDR2_DQ27 MPU_DDR2_DQ28 MPU_DDR2_DQ29 MPU_DDR2_DQ30 MPU_DDR2_DQ31 B BA0 BA1 BA2 LDQS LDQS B7 A8 MPU_DDR2_DQS3+ MPU_DDR2_DQS3- B3 MPU_DDR2_DM3 CS RAS CAS WE LDM CK CK CKE ODT NC_A2 RFU_L3 RFU_L7 VREF VSSDL VDDL A2 L3 L7 VSSQ5 VSSQ6 VSSQ7 VSSQ8 VSSQ9 MPU_DDR2_BA0 MPU_DDR2_BA1 MPU_DDR2_BA2 A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A7 B2 B8 D2 D8 B H8 H3 H7 J2 J8 J3 J7 K2 K8 K3 H2 K7 L2 L8 VSS2 VSS3 VSS4 VSS5 MPU_DDR2_A0 MPU_DDR2_A1 MPU_DDR2_A2 MPU_DDR2_A3 MPU_DDR2_A4 MPU_DDR2_A5 MPU_DDR2_A6 MPU_DDR2_A7 MPU_DDR2_A8 MPU_DDR2_A9 MPU_DDR2_A10 MPU_DDR2_A11 MPU_DDR2_A12 MPU_DDR2_A13 A1 E9 H9 L1 VDDIODDR U35 A3 E3 J1 K9 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 U34 MPU_DDR2_A0 MPU_DDR2_A1 MPU_DDR2_A2 MPU_DDR2_A3 MPU_DDR2_A4 MPU_DDR2_A5 MPU_DDR2_A6 MPU_DDR2_A7 MPU_DDR2_A8 MPU_DDR2_A9 MPU_DDR2_A10 MPU_DDR2_A11 MPU_DDR2_A12 MPU_DDR2_A13 MPU_DDR2_A[0..13] MPU_DDR2_DQ[0..31] A1 E9 H9 L1 VDDIODDR MT47H128M8CF-25E A VDDIODDR C313 2.2uF C314 2.2uF C315 100nF C316 100nF C317 100nF C318 100nF C319 100nF C320 100nF C321 100nF C322 100nF C323 100nF C324 100nF C325 100nF C326 100nF C327 100nF C328 100nF C329 100nF C330 1nF C331 1nF SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 4 3 2 1 XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX VER. DATE REV. SHEET E DDR2 - II 5 X.X X.X X.X X.X X.X 9 20 MPU - PIOC, Flash 5 4 D PC0/SPI0_MISO/PWMH2/ISI_D8 PC1/SPI0_MOSI/PWML2/ISI_D9 PC2/SPI0_SPCK/PWMH3/ISI_D10 PC3/SPI0_NPCS0/PWML3/ISI_D11 PC4/SPI0_NPCS1/MCI0_CK/PCK1 PC5/D0/MCI0_CDA PC6/D1/MCI0_DA0 PC7/D2/MCI0_DA1 PC8/D3/MCI0_DA2 PC9/D4/MCI0_DA3 PC10/D5/MCI0_DA4 PC11/D6/MCI0_DA5 PC12/D7/MCI0_DA6 PC13/NRD/NANDOE/MCI0_DA7 PC14/NWE/NANDWE PC15/NCS3 PC16/NANDRDY PC17/A21/NANDALE PC18/A22/NANDCLE PC19/ISI_D0/TK1 PC20/ISI_D1/TF1 PC21/ISI_D2/TD1 PC22/ISI_D3/RF1 PC23/ISI_D4/RD1 PC24/ISI_D5/RK1/PCK1 PC25/ISI_D6/TWD3/URXD1 PC26/ISI_D7/TWCK3/UTXD1 PC27/AD0/SPI0_NPCS1/PWML0 PC28/AD1/SPI0_NPCS2/PWML1 PC29/AD2/SPI0_NPCS3/PWMFI0 PC30/AD3/PWMH0 PC31/AD4/PWMH1 C V4 P8 V5 R8 W5 T8 W6 R19 N15 U8 V6 V7 W7 V8 U9 W8 V9 W9 V10 U14 V11 U15 T15 U16 T16 V17 R16 U12 T11 R13 T12 T13 PC0 PC1 PC2 PC3 PC4 PC5 PC6 PC7 PC8 PC9 PC10 PC11 PC12 PC13 NAND_WEn NAND_NCS3 NAND_RDY NAND_ALE NAND_CLE PC19 PC20 PC21 PC22 PC23 PC24 PC25 PC26 R367 R368 22R 22R DNP AT25_SPI0_SO PC0 22R 22R DNP AT25_SPI0_SI PC1 R369 R370 R371 R275 R84 22R 22R 22R DNP AT25_SPI0_SPCK PC2 PC3 R372 R83 R276 22R 22R 22R DNP PC19 R271 22R PC20 R270 22R PC21 R265 22R PC22 R69 22R PC23 R62 22R PC24 R64 22R 0R R277 DNP 0R R86 AD0_XP AD1_XM AD2_YP AD3_YM AD4_LR PC25 R63 22R PC26 R65 22R ISI_D9 NAND_RDY XPRO_PC2 ISI_D10 0R 7 R249 19 AT25_SPI0_NCPS0 XPRO_PC3 ISI_D11 3V3_NAND ISI_D0 RR14 100K 1 2 3 4 5 6 10 11 14 15 20 21 22 23 24 35 R250 100K DNP ISI_D1 ISI_D2 ISI_D3 ISI_D4 CLE ALE RE WE CE 29 30 31 32 41 42 43 44 26 27 28 33 40 45 46 I/O0 I/O1 I/O2 I/O3 I/O4 I/O5 I/O6 I/O7 N.C18 N.C19 N.C20 N.C21 N.C22 N.C23 N.C24 R/B WP N.C1 N.C2 N.C3 N.C4 N.C5 N.C6 N.C7 N.C8 N.C9 N.C10 N.C11 N.C12 N.C13 N.C14 N.C15 N.C16 NAND_IO0 NAND_IO1 NAND_IO2 NAND_IO3 NAND_IO4 NAND_IO5 NAND_IO6 NAND_IO7 D 47 38 DNU2 DNU1 3V3_NAND 12 37 34 39 VCC_1 VCC_2 VCC_3 VCC_4 13 36 25 48 VSS_1 VSS_2 VSS_3 VSS_4 MT29F4G08ABAEAWP 3V3_NAND R524 ISI_D5 C235 100nF ISI_D6 C237 100nF C236 100nF VCC_3V3 0R C189 100nF ISI_D7 PC5 R377 R378 22R 22R NAND_IO0 PC6 R379 R380 22R 22R NAND_IO1 VCC_3V3 1 Wire ROM U23 2 1Wire_PE28 U21 16 17 8 18 9 C ADC_INPUT SAMA5D44 R278 1.5K_1% 1 NAND_CLE NAND_ALE NAND_REn NAND_WEn NAND_CEn ISI_D8 8 7 6 5 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 U22F 2 3 1 2 3 4 56 Figure 5-9. 3 I/O GND NC1 NC2 NC3 NC4 1 4 5 6 PC7 R381 R382 22R 22R NAND_IO2 PC8 R383 R384 22R 22R NAND_IO3 PC9 R385 R386 22R 22R NAND_IO4 PC10 R387 R388 22R 22R NAND_IO5 MCI0_CDA_PC5 SPI ROM MCI0_DA0_PC6 R241 100K VCC_3V3 R525 0R U15 MCI0_DA1_PC7 MCI0_DA2_PC8 AT25_SPI0_SI AT25_SPI0_SO AT25_SPI0_SPCK 5 2 6 CS_NPCS0 1 SI SO SCK 8 VCC 3 7 WP HOLD CS MCI0_DA3_PC9 C137 100nF 4 GND AT25DF321A DS28EC20P PC11 R389 R390 22R 22R NAND_IO6 PC12 R391 R392 22R 22R NAND_IO7 PC13 R393 R394 22R 22R B NAND_REn MCI0_DA4_PC10 MCI0_DA5_PC11 VCC_3V3 MCI0_DA6_PC12 R526 MCI0_DA7_PC13 R53 10K (PCK1) PC4 22R 0R ISI_MCK_PC4 R442 22R MCI0_CK_PC4 R102 0R DNP EXP_PC4 B U19 1 AT25_SPI0_NCPS0 R441 0R C58 100nF R51 VCC 2 3 5 4 1CS_NPCS0 2 JP6 GND SPI Flash CS NL17SZ126DFT2G DIS_BOOT PB3 C57 100nF U20 1 VCC 2 NAND_NCS3 3 5 4 NAND_CEn NAND Flash CS GND NL17SZ126DFT2G A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 MPU - PIOC, FLASH This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 10 20 MCI 5 4 3 2 1 8 7 6 5 0R D D RR1 68K JP5 1 2 R239 R396 R395 10K 10K 10K C193 10uF C192 100nF MCI0 SD/MMCPlus card 1 2 3 4 MCI0_CD_PE5 (MCI0_WP) (MCI0_CD) 16 15 14 J20 8 7 6 5 4 3 2 1 9 MCI0_DA1_PC7 MCI0_DA0_PC6 MCI0_CK_PC4 MCI0_CDA_PC5 MCI0_DA3_PC9 MCI0_DA2_PC8 13 12 11 10 7SDMM-B0-2211 MCI0_DA4_PC10 MCI0_DA5_PC11 MCI0_DA6_PC12 MCI0_DA7_PC13 C C VDD_MCI1 B B MCI1_CK_PE18 MCI1_CDA_PE19 MCI1_DA3_PE23 MCI1_DA2_PE22 R248 10K VCC_3V3 J14 10 SW2 8 7 6 5 4 3 2 1 (MCI1_DA1) (MCI1_DA0) (MCI1_CK) (MCI1_CDA) (MCI1_DA3) (MCI1_DA2) MCI1 Micro SD card R100 0R DNP 11 12 13 14 RR6,RR7 close to the MPU C73 10uF 9 C195 100nF 2 (MCI1_CD) 1 MCI1_PWR_PE15 VDD_MCI1 SW1 MCI1_CD_PE6 MCI1_DA1_PE21 MCI1_DA0_PE20 RR12 68K 3 R264 10K 8 7 6 5 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 VCC_3V3 R527 1 2 3 4 57 Figure 5-10. PJS008-2120-0 Q6 IRLML6402 R113 4.7K A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 MCI This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 11 20 USB 5 4 2 3 3V3_USB 0R R5 L28 220 Ohm MN4 5 VCC 6 1Y D MN3 C110 100nF VCC_5V + C16 33uF 8 7 C117 100nF L27 220 Ohm 6 5 C109 100nF J5 C118 100nF OUTA ENA IN FLGA GNG FLGB OUTB ENB 1 1 2A 3 2 USBB_EN5V_PE11 2 4 2Y GND 3 USBC_EN5V_PE12 SN74LVC2GU04 4 USB_OVCUR_PD9 AIC1526-1GS + C6 33uF D 1A USB_OVCUR_PD9 Dual USB A A1 A2 A3 A4 USBB_DM USBB_DP L1 220 Ohm B1 B2 B3 B4 A B 1 2 USBC_DM USBC_DP 3 4 LCD_ETH1_CONFIG=0: LCD 5v disable; ETH1 enable EARTH_USB LCD_ETH1_CONFIG=1: LCD 5v enable(LCD_DETECT#=0); ETH1 disable 3V3_USB R2 L21 220 Ohm C92 100nF C3 33uF LCD_ETH1_CONFIG U2 5 + 10K C2 100nF 2 5V_LCD C VCC 1 2 GND MN1 8 C94 100nF L29 220 Ohm USB_VBUS_5V 7 6 JP3 2 C91 100nF C JP2 4 VCC_5V C102 10uF 1 5 OUTA ENA IN FLGA GNG FLGB OUTB ENB 1 3V3_USB 3 C4 100nF 74LVC1G08GV 3 R7 47K MN2 2 5 VCC 6 1Y 1A 1 4 2Y 2A 3 2 R4 1K LCD_DETECT# USB_OVCUR_PD9 4 GND 3V3_USB AIC1526-1GS USBA_EN5V_PE10 SN74LVC2GU04 R3 100K R172 10K R176 B 10 SHD VBUS DM DP ID GND USBA_VBUS_PE31 B R175 200K_1% 1 2 3 4 5 USBA_DM USBA_DP 9 11 EARTH_USB EN_PWRLCD 100K_1% 8 7 C108 15pF 6 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 VCC_3V3 1 1 58 Figure 5-11. J1 47589-0001 A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 USB This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 12 20 ETH0 5 4 2 3 1 R10 0R C20 10uF L23 220 Ohm C11 100nF R180 L4 0R GND_ETH0 EARTH_ETH0 PHY0_VDDA 10Base-T/100Base-TX D C10 10uF 120 Ohm D C7 100nF 19 G0_TXCK_PB0 G0_TX1_PB13 G0_TX0_PB12 G0_TXEN_PB2 25 24 23 13 14 15 16 18 20 29 28 G0_RX1_PB9 G0_RX0_PB8 G0_RXDV_PB6 G0_RXER_PB7 R44 R20 PHY0_VDD G0_MDC_PB16 G0_MDIO_PB17 G0_IRQ_PE1 R43 TXP 22R C 3 VDDA_3V3 8 7 6 5 PHY0_VDDA 8 7 6 5 TXM RXP RR5 10K VDD_1V2 1 6 2 TD- TX- 2 5 3 RD+ RX+ 3 RX- 6 6 RD- 4 2 C24 C100 100nF 2.2uF C99 100nF 75 C25 GND PADDLE NC1 NC2 NC3 REXT 1 33 22 26 27 10 R16 8 ETH0_XO 9 ETH0_XI 75 75 7 NC 100nF 4 5 GND_ETH0 1nF 75 8 PHY0_VDD 6.49K_1% C 7 8 1 2 3 4 J00-0061NL PHY0_VDD XO 17 PHY0_VDD TX+ 5 CT RXM MDC MDIO INTRP/NAND_TREE 1 TD+ 7 4 CT 1K 1K 12 11 21 RR6 10K J6 RXF_CLK/B-CAST_OFF TXD1 TXD0 TXEN PHYAD0 PHYAD1 RXD1/PHYAD2 RXD0/DUPLEX CRS_DV/CONFIG2 RXER/ISO CONFIG1 CONFIG0 16 EARTH_ETH0 U10 Terminal Resistor close to output side 1 2 3 4 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 PHY0_VDD VCC_3V3 15 59 Figure 5-12. VDDIO XI R199 10K EARTH_ETH0 R203 10K PHY0_VDD D5 PHY0_VDD LED0/NWAYEN LED1/SPEED 2 30 31 4 At the De-Assertion of Reset: R25 NRST_3V3 PHY ADD[2:0]-pin15/14/13: 001 = 1 CONFIG[2:0]-pin18/29/28:001,RMII mode Duplex Mode-pin16: 1,Half Duplex Isolate Mode-pin20: 0,Disable Speed Mode-pin31: 1,100Mbps Nway Auto-Negotiation-p30: 1,Enable 0R 32 1 R197 470R 3 R205 470R APTB1612YSGC-F01 RESET KSZ8081RNB ETH0_XI ETH0_XO R8 DNP 1M Y1 B C17 22pF 1 4 2 3 25MHz B C27 22pF A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 ETH0 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 13 20 ETH1 5 4 2 3 1 D E1_TX1 E1_TX0 E1_TXEN 25 24 23 13 14 15 16 18 20 29 28 E1_RX1 E1_RX0 E1_RXDV E1_RXER J7 RXF_CLK/B-CAST_OFF TXP TXD1 TXD0 TXEN PHYAD0 PHYAD1 RXD1/PHYAD2 RXD0/DUPLEX CRS_DV/CONFIG2 RXER/ISO CONFIG1 CONFIG0 R37 G1_IRQ_PE2 0R PHY1_VDDA TXM RXP MDC MDIO INTRP/NAND_TREE VDD_1V2 GND PADDLE NC1 NC2 NC3 REXT VDDA_3V3 RR4 10K RR7 R21 R38 10K 1K 1K 1 2 3 4 PHY ADD[2:0]-pin15/14/13: 010 = 2 CONFIG[2:0]-pin18/29/28:001,RMII mode Duplex Mode-pin16: 1,Half Duplex Isolate Mode-pin20: 0,Disable Speed Mode-pin31: 1,100Mbps Nway Auto-Negotiation-p30: 1,Enable PHY1_VDD XO 17 PHY1_VDD PHY1_VDD TX+ 1 6 2 TD- TX- 2 5 3 RD+ RX+ 3 RX- 6 XI VDDIO 6 RD- 4 2 C21 2.2uF C22 100nF C98 100nF C97 100nF 75 1 33 22 26 27 10 75 75 7 NC 4 5 GND_ETH1 1nF 75 8 R17 6.49K_1% 8 ETH1_XO 9 ETH1_XI 7 8 PHY1_VDD R202 10K EARTH_ETH1 R207 10K PHY1_VDD D6 J00-0061NL L24 220 Ohm R179 C LED0/NWAYEN LED1/SPEED NRST_3V3 R13 0R 32 D 5 CT 8 7 6 5 8 7 6 5 At the De-Assertion of Reset: 3 1 TD+ 7 4 CT RXM 12 11 21 E1_MDC E1_MDIO EARTH_ETH1 16 19 1 2 3 4 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 10Base-T/100Base-TX U7 E1_TXCK 15 60 Figure 5-13. 30 31 2 1 R201 470R 4 3 R206 470R 0R C GND_ETH1 EARTH_ETH1 APTB1612YSGC-F01 RESET KSZ8081RNB PHY1_VDD VCC_3V3 PHY1_VDD R11 0R C23 10uF L5 PHY1_VDDA 120 Ohm C8 10uF C12 100nF C30 100nF U8 C13 100nF VCC 18 4 6 8 G1_TXCK_PA2 G1_TX1_PA15 G1_TX0_PA14 G1_TXEN_PA4 1 LCD_ETH1_CONFIG 3 5 7 9 G1_RX1_PA13 G1_RX0_PA12 G1_RXDV_PA10 G1_RXER_PA11 B 19 1Y0 1A1 1A2 1A3 1A0 1Y1 1Y2 1Y3 20 2 16 14 12 E1_TXCK E1_TX1 E1_TX0 E1_TXEN 17 15 13 11 E1_RX1 E1_RX0 E1_RXDV E1_RXER ETH1_XI ETH1_XO 1OE 2Y0 2Y1 2Y2 2Y3 2A0 2A1 2A2 2A3 2OE GND R9 1M DNP Y2 4 1 C18 22pF 10 2 3 25MHz B C26 22pF 74LVC244APW PHY1_VDD 1 3 2 1A 2A PHY1_VDD C119 100nF MN10 U27 VCC 1Y 2Y 5 6 4 4 G1_MDIO_PA23 2 C115 100nF VCC E Y Z GND GND 5 1 SN74LVC2GU04 U28 4 G1_MDC_PA22 2 E1_MDIO 3 74LVC1G66GW PHY1_VDD C116 100nF VCC E Y Z GND 5 1 E1_MDC 3 74LVC1G66GW A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 ETH1 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 14 20 DAA 5 4 2 3 1 D L26 220 Ohm D4 TEST RAC MMBD3004S-7-F 2 4 1 5 D3 MMBD3004S-7-F 2 1 C107 470pF TAC EIC R55 2 0R 11 C44 6 R23 237K_1% RXI DIBN C15 C14 10nF 3 EIF TXO C 1 100R_1% 9 8 7 Q4 MMBAT42 DAA_GND Q1 MMBAT42 1 1 Q3 MMBAT42 2 TXF 1 R35 3 EIO DIBP C52 150pF 10 DVDD GPIO 13 EP VC C45 100nF R215 280R_1% R219 280R_1% R196 280R_1% R204 280R_1% 1206 1206 1206 1206 2 4 14 C53 150pF 1 47nF 100V 3 1 0R RJ11 1 Q5 MMBAT42 C 2 R54 TB3100M-13-F DAA_GND 16 C46 47pF SMD_DIBP_PE29 L25 220 Ohm 100nF DAA_GND 3 6.81M_1% 3 DAA_GND TX1 LAN0066-50 SMD_DIBN_PE30 C106 470pF DAA_GND R24 2 PWR AVDD C123 100nF 2 C124 100nF 3 15 2 1 2 3 4 5 6 D2 2 12 J3 MJM0606GE06-H 1 6.81M_1% 3 R32 MN5 3 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 D 17 61 Figure 5-14. R31 3.01R_1% CX20548-11Z R27 3.01R_1% R22 110R DAA_GND C33 100nF R15 9.1R_1% DAA_GND DAA_GND B B A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 DAA This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 15 20 HDMI 5 4 2 3 1 F1 D7 1812L160/12 RB160M-60 1 2 Type A connector C90 HDMI_IRQ_PE3 D D 3V3_HDMI 2.2K R114 R163 2.2K 3V3_HDMI R331 HDMI_TWD0_PA30 HDMI_TWCK0_PA31 R162 2.2K J18 HDM19SW-4-1R-H 100nF HDMI_HPD 0R R286 G2 G4 HDMI_DAT 4.7K R75 1K DNP 35 34 33 51 R107 10K 45 44 41 40 39 37 HDMI_TK0_PB27 HDMI_TF0_PB31 HDMI_TD0_PB28 (PCK0) HDMI_MCK_PD8 38 R85 48 49 TX1+ TX1TX2+ TX2EXT_SWING 0R 36 B 59 58 SIL_TCK+ SIL_TCK- 62 61 SIL_TD0+ SIL_TD0- 65 64 SIL_TD1+ SIL_TD1- 68 67 SIL_TD2+ SIL_TD2- D14 D13 D12 TVS TVS TVS L15 DNP 47K SIL_TCK- 4 3 HDMI_TCK- HDMI_TCK- SIL_TCK+ 1 2 HDMI_TCK+ HDMI_TCK+ HDMI_TD0- NCMS20C900 R312 0R R311 HDMI_TD0+ HDMI_TD1- 0R HDMI_TD1+ HDMI_TD2- L16 DNP 56 R115 4.3K_1% Close to PIN56 1V2_HDMI L10 SIL_TD0- 4 3 HDMI_TD0- SIL_TD0+ 1 2 HDMI_TD0+ HDMI_TD2+ C NCMS20C900 R310 0R AVCC_1 AVCC_2 AGND_1 AGND_2 IO_SEL 22 3V3_HDMI TX0+ TX0- Close to SiI902x HDMI_PCK_PA28 HDMI_VSYNC_PA26 HDMI_HSYNC_PA27 HDMI_DEN_PA29 HDMI_RST_PB15 R330 TXC+ TXC- CLK IOVCC18_1 IOVCC18_2 IOVCC18_3 VSYNC HSYNC DE RESETN 60 66 C181 C177 C184 C238 C239 1nF 1nF 1nF 1nF 100nF C182 100nF C188 100nF 60 Ohm C60 10uF C59 10uF R309 57 63 69 3 21 46 0R L17 DNP R289 1K IO_SEL: LOW=3.3V HIGH=1.8V 3V3_HDMI L11 VCC_3V3 SIL_TD1- 4 3 HDMI_TD1- SIL_TD1+ 1 2 HDMI_TD1+ NCMS20C900 R308 0R 60 Ohm C229 100nF C234 100nF C211 100nF C61 10uF R307 0R L18 DNP SCLK LRCLK I2S0 I2S1 I2S2 I2S3 L12 MCLK ePAD VDDQ TMODE C D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 D10 D11 D12 D13 D14 D15 D16 D17 D18 D19 D20 D21 D22 D23 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0R G1 G3 32 31 30 29 28 27 25 24 23 20 19 18 17 16 15 14 13 11 10 9 8 7 6 4 HDMI_DAT0_PA0 HDMI_DAT1_PA1 HDMI_DAT2_PA2 HDMI_DAT3_PA3 HDMI_DAT4_PA4 HDMI_DAT5_PA5 HDMI_DAT6_PA6 HDMI_DAT7_PA7 HDMI_DAT8_PA8 HDMI_DAT9_PA9 HDMI_DAT10_PA10 HDMI_DAT11_PA11 HDMI_DAT12_PA12 HDMI_DAT13_PA13 HDMI_DAT14_PA14 HDMI_DAT15_PA15 HDMI_DAT16_PA16 HDMI_DAT17_PA17 HDMI_DAT18_PA18 HDMI_DAT19_PA19 HDMI_DAT20_PA20 HDMI_DAT21_PA21 HDMI_DAT22_PA22 HDMI_DAT23_PA23 R313 DDCSDA DDCSCL MN7 71 50 HDMI_SCL 54 52 4.7K HPD INT R112 CEC_A CEC_D 4.7K DNP 72 R111 1 2 3V3_HDMI CI2CA SPDIF T1 CVCC12_1 CVCC12_2 CVCC12_3 CVCC12_4 CVCC12_5 CVCC12_6 CGND 5 12 26 42 47 53 1V2_HDMI C231 100nF C232 100nF C233 100nF C221 100nF C205 100nF C226 100nF SiI9022ACUN SIL_TD2- 4 3 HDMI_TD2- SIL_TD2+ 1 2 HDMI_TD2+ NCMS20C900 R306 0R 60 Ohm C62 10uF B 43 MN9 RClamp0514M 73 70 55 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 VCC_5V SCL SDA 62 Figure 5-15. HDMI_TD0+ HDMI_TD0HDMI_TCK+ HDMI_TCK- 6 7 8 9 10 LINE4 NC4 GND LINE2 NC3 NC2 LINE3 VCC NC1 LINE1 5 4 3 2 1 HDMI_TD0+ HDMI_TD0- 5 4 3 2 1 HDMI_TD2+ HDMI_TD2- HDMI_TCK+ HDMI_TCK- MN11 RClamp0514M HDMI_TD2+ HDMI_TD2HDMI_TD1+ HDMI_TD1- 6 7 8 9 10 LINE4 NC4 GND LINE2 NC3 NC2 LINE3 VCC NC1 LINE1 HDMI_TD1+ HDMI_TD1- A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 HDMI This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 16 20 AUDIO 5 4 2 3 3V3_AUDIO L33 120 Ohm D C252 4.7uF HEADPHONE 0R L36 80 Ohm R160 0R AUDIO_GND CPVDD DCVDD 13 AUDIO_GND 14 DNP R158 DNP R159 AUDIO_GND 20R_1% 20R_1% C83 C84 100nF DNP 100nF DNP 18 16 17 C AUDIO_GND C82 4.7uF 20 25 R316 2.2K MIC 5 L34 3 2 4 STEREO_3.5mm J16 C257 470pF 1 L35 C258 470pF 27 R317 2.2K 80 Ohm C248 80 Ohm C249 R323 47K DNP 1uF 1uF R299 0R AUDIO_GND C81 4.7uF 21 HPOUTR HPOUTL 7 3V3_AUDIO R139 1.5K_1% DNP SDA SCLK AUDIO_TWD0_PA30 AUDIO_TWCK0_PA31 DNP C77 33pF R128 MCLK BCLK/GPIO4 LRCLK ADCDAT DACDAT LINEOUTR LINEOUTL LINEOUTFB MICBIAS IRQ/GPIO1 22R 28 29 30 31 32 1 AUDIO_INT R137 0R AUDIO_PCK2_PB10 AUDIO_TK0_PB27 AUDIO_RK0_PB26 AUDIO_RF0_PB30 AUDIO_TF0_PB31 AUDIO_RD0_PB29 AUDIO_TD0_PB28 C AUDIO_IRQ_PE4 IN1R/DMICDAT2 IN1L/DMICDAT1 CPCA VMIDC CPCB CPVOUTP 24 26 R147 1.5K_1% DNP 3 2 HPOUTFB R300 0R R321 47K DNP 4 MN8 15 DBVDD R324 20R_1% DGND PAD C259 100nF R325 20R_1% IN2R IN2L WM8904 5 33 C260 100nF 19 C261 470pF AVDD C262 470pF 1 MICVDD 4 STEREO_3.5mm J17 23 AVDD_1V8 2 6 R161 CPGND 80 Ohm DCVDD L37 C254 4.7uF CPVOUTN 8 C87 2.2uF 10 11 12 C89 2.2uF C88 2.2uF 1V8_AUDIO 9 3 CPVDD 5 C253 100nF C251 100nF AGND SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 3V3_AUDIO 1 D 22 63 Figure 5-16. AVDD_1V8 L19 120 Ohm AUDIO_GND AUDIO_GND AUDIO_GND C85 4.7uF C256 100nF C247 1nF AUDIO_GND AUDIO_GND CPVDD L20 B B C86 4.7uF 120 Ohm R154 0R R155 0R R156 0R C255 100nF AUDIO_GND VCC_1V8 DCVDD R157 0R C246 2.2uF C250 100nF AUDIO_GND A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 AUDIO This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 17 20 DBGU - SAM3U 5 ENSPI 1 4 2 VCC_3V3_3U NRST_3U C334 10nF R408 0R DNP R409 6.8K_1% 1 Y5 12MHz R411 VCC_3V3_3U 1 2 3 4 5 R412 R413 D16 L49 220 Ohm 1 100K 39R 39R 75 74 42 77 80 81 76 90 91 92 7 8 97 98 99 100 71 70 93 94 95 69 16 15 68 67 66 65 64 63 62 58 XIN XOUT FWUP DHSDM DFSDM DFSDP DHSDP D17 TVS DNP TVS DNP 2 45 1 79 9 4 EARTH_USB2 GNDBU GNDANA GNDUTMI GNDPLL GND1 GND2 GND3 11 15pF XIN32 XOUT32 TMS_3U R401 0R TCK_3U R403 0R R399 VCC_3V3_3U 4.7K R400 0R NRST_3U R402 0R TDI_3U R404 0R TDO_3U R405 4.7K J21 1 2 3 4 5 TRSTIN TRSTOUT 10 9 8 7 6 VCC RESET TMS NC2 GND1 TDI TCK NC1 GND2 TDO TC2050-IDC D TRESIN TRESOUT T3 T4 RXDaux TXDaux R443 JP19 1 3 RX_3U TX_3U TDIIN 2 RS232_TXD JP21 R444 10K 3 1 1 7 3 RS232_RXD TMSIN JP20 TCKOUT TMSOUT 2 TDIOUT TDOIN TCKIN ENSPI TCKOUT VCC_3V3 0R C367 100nF 1 U39 OE1 OE2 Y2 VCC A1 Y1 GND A2 To SAMA5D4x 8 5 R445 0R 6 4 R446 0R DBGU_TXD3_PE17 DBGU_RXD3_PE16 NL27WZ126USG JP10 2 2 C CDC Enabled,close to disable 1 1 JTAG Enabled,close to disable JP11 LED1_3U LED2_3U RTCKIN 2 D15 1 Red R414 VCC_3V3_3U 1K 2 D18 1 Green R415 1K VCC_3V3_3U VDDOUT_3U DBGU_USART3 VCC_3V3 R520 U38 C360 C361 3 4.7uF 100nF To SAMA5D4x TRSTOUT R416 TRSTIN 150R TDIOUT TDIIN 150R R421 TMSOUT TMSIN R423 150R TCKOUT TCKIN R424 150R RR19 0R C362 100nF 8 7 6 5 VDDIOP R417 R418 R419 R420 100K 100K 100K 100K DNP DNP DNP DNP NTRST TDI TMS TCK 7 6 5 1 2 3 4 RTCKIN TDOIN TRESOUT R428 TRESIN R517 RR18 0R 8 1 2 3 4 NTRST TDI TMS TCK RTCK TDO NRST_3V3 23 VDDIOP 0R DNP R422 0R R425 DNP 0R R426 DNP RTCK TDO NRST_3V3 R427 0R DNP 150R 150R 1 C365 100nF 21 R435 0R 19 R512 0R 5 DNP J23 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 7 8 9 RS232_TXD 1 2 JP24 RS232_RXD 10 11 12 C1+ GND C1- V+ C2+ V- C2- SD C3+ EN C3- T1IN T2IN T3IN R1OUT R2OUT R3OUT T1OUT T2OUT T3OUT R1IN R2IN R3IN 6 B C363 100nF J24 20 2 1 6 2 7 3 8 4 9 5 C364 100nF 4 24 C366 100nF 22 18 17 16 15 14 13 (RTS) (TXD) L50 220 Ohm 1 EARTH_RS232 A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 1/1 DBGU - JLINK-OB 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE X.X X.X X.X X.X X.X VER. 4 3 2 1 XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 18 20 This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 2 (CTS) (RXD) ADM3312EARU Reserve for RTS/CTS test BR20-H ICE INTERFACE VCC 11 0R B 10 VCC_3V3_3U A C333 100nF R398 4.7K 46 3 82 72 35 61 89 SHD VBUS DM DP ID GND C337 R410 47K VBG VDDIO_1 VDDIO_2 VDDIO_3 VDDIO_4 10 VBUS_DEBUG 50 49 10pF SAM3U_LQFP100 88 60 36 22 15pF 2 8 7 C C336 78 NRST NRSTB TEST JTAGSEL 3 C335 VCC_3V3_3U J22 105017-0001 44 48 AD12BVREF ADVREF VDDCORE_1 VDDCORE_2 VDDCORE_3 VDDCORE_4 VDDCORE_5 VCC_3V3_3U 57 47 ERASE 26 27 28 29 30 31 32 33 37 38 39 40 41 10 11 12 13 14 17 18 19 20 5 21 23 24 25 96 84 85 6 86 2 43 T2 PA0/PGMNCMD PA1/PGMRDY PA2/PGMNOE PA3/PGMNVALID PA4/PGMM0 PA5/PGMM1 PA6/PGMM2 PA7/PGMM3 PA8/PGMD0 PA9/PGMD1 PA10/PGMD2 PA11/PGMD3 PA12/PGMD4 PA13/PGMD5 PA14/PGMD6 PA15/PGMD7 PA16/PGMD8 PA17/PGMD9 PA18/PGMD10 PA19/PGMD11 PA20/PGMD12 PA21/PGMD13 PA22/PGMD12 PA23/PGMD15 PA24 PA25 PA26 PA27 PA28 PA29 PA30 PA31 2 SPX3819M5-L-3-3 TDI TDO/TRACESWO TCK/SWCLK TMS/SWDIO 87 83 9 34 59 BYP 4 51 54 56 55 VDDPLL EN TDI_3U TDO_3U TCK_3U TMS_3U VDDOUT GND C340 100nF 73 C339 10uF VDDIN 5 52 3 VOUT R455 0R DNP PB0 PB1 PB2 PB3 PB4 PB5 PB6 PB7 PB8 PB9 PB10 PB11 PB12 PB13 PB14 PB15 PB16 PB17 PB18 PB19 PB20 PB21 PB22 PB23 PB24 C338 10uF VIN VDDBU VDDANA VDDUTMI 2 VCC_3V3_3U VCC_5V 3 1 6 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 U36 U37 D 1 VCC_3V3_3U 2 JP12 VBUS_DEBUG 2 3 4 VCC_3V3 53 64 Figure 5-17. 65 Figure 5-18. LCD, ISI I/F 5 4 2 3 1 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 LCD/TSC J9 VCC_3V3 LCD_PE24 LCD_TWCK0_PA31 R260 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 0R D LCD_DAT3_PA3 LCD_DAT5_PA5 LCD_DAT7_PA7 LCD_DAT11_PA11 LCD_DAT13_PA13 LCD_DAT15_PA15 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 R454 0R LCD_PE25 LCD_TWD0_PA30 LCD_DAT21_PA21 LCD_DAT19_PA19 LCD_DAT20_PA20 LCD_DAT18_PA18 LCD_DAT2_PA2 LCD_DAT4_PA4 LCD_DAT6_PA6 LCD_DAT10_PA10 LCD_DAT12_PA12 LCD_DAT14_PA14 D ESW-115-33-L-D 5V_LCD LCD_DAT22_PA22 LCD_DAT0_PA0 LCD_DAT8_PA8 LCD_DAT16_PA16 LCD_DISP_PA25 LCD_VSYNC_PA26 LCD_DEN_PA29 R235 R228 R222 AD0_XP AD2_YP AD4_LR C J10 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 0R 0R 0R LCD_SPI1_SO LCD_SPI1_CLK EN_PWRLCD RXD4_PE26 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 LCD_DAT23_PA23 LCD_DAT1_PA1 LCD_DAT9_PA9 LCD_DAT17_PA17 LCD_PWM_PA24 LCD_HSYNC_PA27 LCD_PCK_PA28 R236 R229 0R 0R AD1_XM AD3_YM 1Wire_PE28 C LCD_SPI1_SI LCD_SPI1_CS2 LCD_DETECT# TXD4_PE27 ESW-120-33-L-D ISI VCC_3V3 L48 ISI_RST_PB11 ISI_TWCK0_PA31 B ISI_D1 ISI_D3 ISI_D5 ISI_D7 ISI_D9 ISI_D11 220 Ohm 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 J15 TSW-115-07-L-D 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 R327 22R ISI_PWD_PB5 ISI_TWD0_PA30 ISI_MCK_PC4 (PCK1) ISI_VSYNC_PB3 ISI_HSYNC_PB4 ISI_PCK_PB1 ISI_D0 ISI_D2 ISI_D4 ISI_D6 ISI_D8 ISI_D10 B A A SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 LCD, ISI I/F This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 19 20 EXT - CON, Buttons, LED 5 4 2 3 1 D 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 J19C J19B 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 EXP_PB0 EXP_PB2 EXP_PB6 EXP_PB7 EXP_PB8 EXP_PB9 EXP_PB10 EXP_PB12 EXP_PB13 HDMI_RST_PB15 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 EXP_PB16 EXP_PB17 EXP_PB21 EXP_PB22 EXP_PB24 EXP_PB25 EXP_PB27 EXP_PB28 EXP_PB31 CONN-3x20 VCC_3V3 ADTRG_PE31 EXP_PA24 EXP_PA25 EXP_PC4 EXP_PD8 EXP_PD30 EXP_PD31 LED_USER_PE8 PMIC_IRQ_PE0 G0_IRQ_PE1 G1_IRQ_PE2 HDMI_IRQ_PE3 AUDIO_IRQ_PE4 MCI0_CD_PE5 MCI1_CD_PE6 EXP_PE7 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 LED_POWER_PE9 PB_USER1_PE13 USBA_EN5V_PE10 USBB_EN5V_PE11 USBC_EN5V_PE12 EXP_PE14 MCI1_PWR_PE15 DBGU_RXD3_PE16 DBGU_TXD3_PE17 EXP_PE18 D EXP_PE19 EXP_PE20 EXP_PE21 EXP_PE22 EXP_PE23 LCD_PE24 LCD_PE25 RXD4_PE26 TXD4_PE27 CONN-3x20 CONN-3x20 C C PUSH BUTTON XPRO I/F J11 DNP PB2 PB_USER1 PB_USER1_PE13 JP8 2 1 R138 0R XPRO_PD28 AD0_XP XPRO_PD10 XPRO_PC2 XPRO_PD29 XPRO_PB29 XPRO_PD16 XPRO_PB14 XPRO_PD11 R245 0R DNP PIOBU0 1 3 5 7 9 11 13 15 17 19 2 4 6 8 10 12 14 16 18 20 R246 0R AD3_YM XPRO_PD12 XPRO_PC3 XPRO_PD14 XPRO_PB30 XPRO_PD17 XPRO_PD13 XPRO_PD15 VCC_3V3 SIP2 2X10 header PIOBU1 JP7 2 1 R109 0R PIOBU3 SIP2 B B LED VCC_3V3 D8 Green R164 1Wire_PE28 470R 2 1 LED_POWER_PE9 R333 470R R328 100K 2 1 1 A R332 470R 2 3 Z3 1 Bumper Q7 MH1 PTH MH4 PTH A ADHESIVE FEET D9 Red 2 MH3 PTH 1 LED_USER_PE8 MH2 PTH 1 Through Holes D10 HSMB-C170 1 SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 EXP I/F J19A 1 66 Figure 5-19. IRLML2502TR Z6 Bumper Z4 Bumper Z5 Bumper Z7 Bumper SAMA5D44-MB E D C B A INIT. JH JH JH JH FLEX REV MODIF. DES. SCALE 25-Jun-14 24-Apr-14 04-Apr-14 23-Jan-14 13-May-13 DATE 1/1 EXT- CON, BUTTONS, LED This agreement is our property. Reproduction and publication without our written authorization shall expose offender to legal proceedings. 5 4 3 2 1 X.X X.X X.X X.X X.X VER. XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX XX-XX-XX DATE REV. SHEET E 20 20 6. Revision History Table 6-1. Document SAMA5D4 Evaluation Kit User Guide Rev 11294C Revision History Comments Updated Section 3.2.5 “SAMA5D4 Series Processor” 11294C Modified Section 3.2.7.1 “Power Lines” Modified Section 3.2.7.2 “Power-up and Power-down Considerations” (title and content) 67 11294B Modified Section “IO Expansion Port” Modified Table 4-11 “XPro Socket J11 Signal Descriptions” 11294A First issue SAMA5D4-EK [USER GUIDE] Atmel-11294C-ATARM-SAMA5D4-EK-USER GUIDE_11-Aug-15 ARM Connected Logo XXXXXX Atmel Corporation 1600 Technology Drive, San Jose, CA 95110 USA T: (+1)(408) 441.0311 F: (+1)(408) 436.4200 | www.atmel.com © 2015 Atmel Corporation. / Rev.: Atmel-11294C-ATARM-User Guide_11-Aug-15. Atmel®, Atmel logo and combinations thereof, Enabling Unlimited Possibilities®, maXTouch® and QTouch® and others are registered trademarks or trademarks of Atmel Corporation in U.S. and other countries. ARM®, ARM Connected® logo, and others are the registered trademarks or trademarks of ARM Ltd. Other terms and product names may be trademarks of others. DISCLAIMER: The information in this document is provided in connection with Atmel products. No license, express or implied, by estoppel or otherwise, to any intellectual property right is granted by this document or in connection with the sale of Atmel products. EXCEPT AS SET FORTH IN THE ATMEL TERMS AND CONDITIONS OF SALES LOCATED ON THE ATMEL WEBSITE, ATMEL ASSUMES NO LIABILITY WHATSOEVER AND DISCLAIMS ANY EXPRESS, IMPLIED OR STATUTORY WARRANTY RELATING TO ITS PRODUCTS INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTY OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NON-INFRINGEMENT. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT, CONSEQUENTIAL, PUNITIVE, SPECIAL OR INCIDENTAL DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS AND PROFITS, BUSINESS INTERRUPTION, OR LOSS OF INFORMATION) ARISING OUT OF THE USE OR INABILITY TO USE THIS DOCUMENT, EVEN IF ATMEL HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Atmel makes no representations or warranties with respect to the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and products descriptions at any time without notice. Atmel does not make any commitment to update the information contained herein. Unless specifically provided otherwise, Atmel products are not suitable for, and shall not be used in, automotive applications. Atmel products are not intended, authorized, or warranted for use as components in applications intended to support or sustain life. SAFETY-CRITICAL, MILITARY, AND AUTOMOTIVE APPLICATIONS DISCLAIMER: Atmel products are not designed for and will not be used in connection with any applications where the failure of such products would reasonably be expected to result in significant personal injury or death (“Safety-Critical Applications”) without an Atmel officer's specific written consent. Safety-Critical Applications include, without limitation, life support devices and systems, equipment or systems for the operation of nuclear facilities and weapons systems. Atmel products are not designed nor intended for use in military or aerospace applications or environments unless specifically designated by Atmel as military-grade. Atmel products are not designed nor intended for use in automotive applications unless specifically designated by Atmel as automotive-grade.