Datasheet TERMSERIES Interface Adapter (TIA) NEW Extensive wiring complexity leads to high throughput times in electrical cabinets. Thanks to our TERMSERIES interface adapter, you benefit from the speed of our plug-and-play solution. Let’s connect. To reduce wiring times, pre-assembled lines are used between the controller and interface level and are simply connected to the TERMSERIES adapter. This enables electrical cabinet throughput times to be significantly reduced. Our pre-assembled plug-and-play solution with TERMSERIES interface adapter minimizes wiring complexity. The adapter has a universal fit and offers a genuine space advantage in conjunction with TERMSERIES products with identical contours. Thanks to its symmetrical structure, the adapter can be connected to both TERMSERIES coil and contact connections. The use of positive (PNP) and negative (NPN) switching logic is also possible for the lower level with the aid of the potential changeover switch. Weidmuller, Canada 10 Spy Court Markham, Ontario L3R 5H6 Telephone: (800) 268-4080 Facsimile: (877) 300-5635 Email: [email protected] Website: www.weidmuller.ca Weidmuller, Mexico Blvd. Hermanos Serdán 698, Col. San Rafael Oriente Puebla, Puebla, Mexico C.P. 72029 Telephone: 01 222 2686267 Facsimile: 01 222 2686219 Email: [email protected] Website: www.weidmuller.com.mx Weidmuller, United States 821 Southlake Blvd. Richmond, Virginia 23236 Telephone: (800) 849-9343 Facsimile: (804) 379-2593 Email: [email protected] Website: www.weidmuller.com TERMSERIES Interface Adapter (TIA) Connection to a variety of controllers The standardized ribbon cable plug-in connections enable connection of all the interface system's pre-assembled cable types. Fast supply and bridging of the auxiliary voltage Quick and safe supply of the auxiliary voltage as a result of the TOP connection with "PUSH IN" technology. Simple bridging is also possible thanks to duplication of the connections. Reliable and unambiguous wiring Installation is unambiguous and safe thanks to practical marking of the connections, assignment of the contacts and the option of individual marking using MultiCard. Both types of logic with one device The potential switch for the lower level allows the adapter for plus and minus switching logic to be used (PNP/NPN). 2 Connection with our remote I/O system u-remote Use our perfectly matched cable harness for connecting our u-remote DI/DO sub assemblies and TERMSERIES relays. TERMSERIES Interface Adapter (TIA) Applications The TIA can be used together with TERMSERIES relay and optocoupler products, resulting in substantial space-savings. Its symmetrical design means the TIA can be plugged onto both the TERMSERIES input coil connections and/or output contact connections. The TIA’s new contact system creates a spring-loaded effect, thus guaranteeing reliable contact at all times – even in vibration applications. It visually and audibly snaps into place, providing the user with valuable feedback to indicate secure connection is made into the relay terminal block. Connections to the u-remote TIAs can also be combined with Weidmuller’s new remote I/O system (u-remote), connect the u-remote DI/DO sub-assemblies using form-fit cable sets for the TERMSERIES relay adapter. Connections with Flying Leads The TIA can be used with a flying lead cable to give flexibility in wiring the relays or optocouplers to another connector location. The cabling solution is a simple, speedy, configurable and space saving means to wire your electrical cabinet. Connect to u-remote 20-Pin Connector Flying Ferrule Leads Connections for PLC Interfaces The TIA and cabling solutions can also be used to create simple, easy and accurate connection solutions for many PLC manufacturers’ products. See Catalog 4.5 Interface Units & PLC Solutions for a listing of these solutions. CSA/UL Approved Cables 3 TERMSERIES Interface Adapter (TIA) TERMSERIES adapters TIA F10 Potential change-over switch •S uitable for input and output logic •V ersion for 6.4 mm TERMSERIES base •S upply connections (PUSH IN) designed double for simple supply voltage bridging •U ser-friendly and unique markings •1 0-pole connecting plug according to DIN EN 60603-13 The potential change-over switch is located between contact rows of the TERMSERIES adapter. It is used to switch the potential of the lower contact row to “+” or “-“ potential of the supply voltage. 9'& ² ² Installation input A1 24V A2 TOS 24V A1 + A2 - NC TRS 24VDC 1CO 1122770000 Figure 1a Figure 1b Installation output NO 14 11 62 / 51 / 43 COM 2 III 1.5 kV 32 V IP 20 11 -40°C...+60°C -40°C...+85°C 5...95% (indoor), Tu = 40°C, no condensation V-0 cULus Listed, GL, CE Figure 1a:Positive-switching logic (PNP): Potential change-over switch to “-“, installation on 24 V DC input (A1/A2). Figure 1b:Negative-switching logic (NPN): Potential change-over switch to “+”, installation on ONLY 24 V UC units. 14 10-pole plug according to DIN EN 60603-13, long locking lever A1 14 11 12 Cables 10 pin to flying ferruled leads 10 pin to flying ferruled leads 10 pin to flying ferruled leads 10 pin to 10 pin connectors 10 pin to 10 pin connectors 10 pin to 10 pin connectors Note 4 Part No. 1463520000 Suitable for 6.4 mm wide TERMSERIES base TRS 24VDC 1CO 1122770000 Accessories Qty. 1 NC Note Type TIA F10 12 Ordering data Figure 2a Figure 2b Description SP-CBL-TIAU-10-F 0.5M SP-CBL-TIAU-10-F 1M SP-CBL-TIAU-10-F 2M SP-CBL-TIAU-10-10 0.5M SP-CBL-TIAU-10-10 1M SP-CBL-TIAU-10-10 2M Length 0.5 m 1.0 m 2.0 m 0.5 m 1.0 m 2.0 m Part No. 6720000965 6720000966 6720000967 6720000960 6720000961 6720000962 other lengths available upon request and see page 8 for additional cables Figure 2a:Positive-switching logic (sourced loads): Potential change-over switch to “+”, installation on output (11/14). Figure 2b:Negative-switching logic (sinked loads): Potential change-over switch to “-“, installation on output (11/14). 12 A2 TRS 14 11 12 A1 PUSH IN 0.13 mm² 1.5 mm² 4 (+,+,−,−) mm 14 11 24 V DC 30 V DC 100 mA 1A 1A 8 COM NO General data Ambient temperature (operational) Storage temperature Humidity UL 94 flammability rating Agency Approvals Insulation coordination Pollution degree Overvoltage category Impulse withstand voltage Rated voltage Protection degree Dimensions Depth x width x height Note 24 V DC ± 20% Green LED 11 Supply Supply voltage Status display Signals Rated voltage Voltage, max. Rated current (per signal path) Current (per signal path), max. Total current of all signals, max. Number of signal paths Connection data (supply) Wire connection method Clamping range, rated connection, min. Clamping range, rated connection, max. Number of terminals Connection data (signal) Plug type 14 Technical data TERMSERIES Interface Adapter (TIA) TERMSERIES adapters TIAL F10 Potential change-over switch •S uitable for input and output logic •V ersion for 12.8 mm TERMSERIES base •S upply connections (PUSH IN) designed double for simple supply voltage bridging •U ser-friendly and unique markings •1 0-pole connecting plug according to DIN EN 60603-13 The potential change-over switch is located between contact rows of the TERMSERIES adapter. It is used to switch the potential of the lower contact row to “+” or “-“ potential of the supply voltage. 9'& ² ² Installation input 12 A1 24V A2 TOS A2 TRS 14 11 12 A1 24V A1 + A2 - NC TRS 24VDC 1CO 1122770000 PUSH IN 0.13 mm² 1.5 mm² 4 (+,+,−,−) Figure 1a Figure 1b Installation output NO 14 11 62 / 102 / 43 COM 2 III 1.5 kV 32 V IP 20 11 -40°C...+60°C -40°C...+85°C 5...95% (indoor), Tu = 40°C, no condensation V-0 cULus Listed, GL, CE Figure 1a:Positive-switching logic (PNP): Potential change-over switch to “-“, installation on 24 V DC input (A1/A2). Figure 1b:Negative-switching logic (NPN): Potential change-over switch to “+”, installation on ONLY 24 V UC units. 14 10-pole plug according to DIN EN 60603-13, long locking lever A1 mm 14 11 24 V DC 30 V DC 100 mA 1A 1A 8 COM NO General data Ambient temperature (operational) Storage temperature Humidity UL 94 flammability rating Agency Approvals Insulation coordination Pollution degree Overvoltage category Impulse withstand voltage Rated voltage Protection degree Dimensions Depth x width x height Note 24 V DC ± 20% Green LED 11 Supply Supply voltage Status display Signals Rated voltage Voltage, max. Rated current (per signal path) Current (per signal path), max. Total current of all signals, max. Number of signal paths Connection data (supply) Wire connection method Clamping range, rated connection, min. Clamping range, rated connection, max. Number of terminals Connection data (signal) Plug type 14 Technical data 14 11 12 Cables 10 pin to flying ferruled leads 10 pin to flying ferruled leads 10 pin to flying ferruled leads 10 pin to 10 pin connectors 10 pin to 10 pin connectors 10 pin to 10 pin connectors Note Part No. 1463540000 Suitable for 12.8 mm wide TERMSERIES base TRS 24VDC 1CO 1122770000 Accessories Qty. 1 NC Note Type TIAL F10 12 Ordering data Figure 2a Figure 2b Description SP-CBL-TIAU-10-F 0.5M SP-CBL-TIAU-10-F 1M SP-CBL-TIAU-10-F 2M SP-CBL-TIAU-10-10 0.5M SP-CBL-TIAU-10-10 1M SP-CBL-TIAU-10-10 2M Length 0.5 m 1.0 m 2.0 m 0.5 m 1.0 m 2.0 m Part No. 6720000965 6720000966 6720000967 6720000960 6720000961 6720000962 Figure 2a:Positive-switching logic (sourced loads): Potential changeover switch to “+”, installation on output (11/14). Figure 2b:Negative-switching logic (sinked loads): Potential changeover switch to “-“, installation on output (11/14). other lengths available upon request and see page 8 for additional cables 5 TERMSERIES Interface Adapter (TIA) TERMSERIES adapters TIAL F20 •S uitable for input and output logic •V ersion for 6.4 mm TERMSERIES base •S upply connections (PUSH IN) designed double for simple supply voltage bridging •U ser-friendly and unique markings •2 0-pole connecting plug according to DIN EN 60603-13 Potential change-over switch The potential change-over switch is located between contact rows of the TERMSERIES adapter. It is used to switch the potential of the lower contact row to “+” or “-“ potential of the supply voltage. 9'& ² ² Installation input A1 24V A2 TOS A2 TRS 14 11 12 12 A1 24V A1 + A2 - NC TRS 24VDC 1CO 1122770000 PUSH IN 0.13 mm² 1.5 mm² 4 (+,+,−,−) Figure 1a Figure 1b Installation output NO 14 11 62 / 102 / 43 COM 2 III 1.5 kV 32 V IP 20 11 -40°C...+60°C -40°C...+85°C 5...95% (indoor), Tu = 40°C, no condensation V-0 cULus Listed, GL, CE Figure 1a:Positive-switching logic (PNP): Potential change-over switch to “-“, installation on 24 V DC input (A1/A2). Figure 1b:Negative-switching logic (NPN): Potential change-over switch to “+”, installation on ONLY 24 V UC units. 14 20-pole plug according to DIN EN 60603-13, long locking lever A1 mm 14 11 24 V DC 30 V DC 100 mA 1A 2A 16 COM NO General data Ambient temperature (operational) Storage temperature Humidity UL 94 flammability rating Agency Approvals Insulation coordination Pollution degree Overvoltage category Impulse withstand voltage Rated voltage Protection degree Dimensions Depth x width x height Note 24 V DC ± 20% Green LED 11 Supply Supply voltage Status display Signals Rated voltage Voltage, max. Rated current (per signal path) Current (per signal path), max. Total current of all signals, max. Number of signal paths Connection data (supply) Wire connection method Clamping range, rated connection, min. Clamping range, rated connection, max. Number of terminals Connection data (signal) Plug type 14 Technical data 14 11 12 Cables 20 pin to flying ferruled eads 20 pin to flying ferruled leads 20 pin to flying ferruled leads 20 pin to 20 pin connectors 20 pin to 20 pin connectors 20 pin to 20 pin connectors Note 6 Qty. 1 Part No. 1463550000 Suitable for 6.4 mm wide TERMSERIES base TRS 24VDC 1CO 1122770000 Accessories NC Note Type TIAL F20 12 Ordering data Figure 2a Figure 2b Description SP-CBL-TIAU-20-F, 0.5M SP-CBL-TIAU-20-F 1M SP-CBL-TIAU-20-F 2M SP-CBL-TIAU-20-20 0.5M SP-CBL-TIAU-20-20 1M SP-CBL-TIAU-20-20 2M Length 0.5 m 1.0 m 2.0 m 0.5 m 1.0 m 2.0 m Part No. 6720000950 6720000951 6720000952 6720000945 6720000946 6720000947 other lengths available upon request and see page 8 for additional cables Figure 2a:Positive-switching logic (sourced loads): Potential changeover switch to “+”, installation on output (11/14). Figure 2b:Negative-switching logic (sinked loads): Potential changeover switch to “-“, installation on output (11/14). TERMSERIES Interface Adapter (TIA) TERMSERIES adapters TIA SUBD 15S •S uitable for input and output logic •V ersion for 6.4 mm TERMSERIES base •U ser-friendly and unique markings •1 5-pole sub-D plug according to DIN 41652 / IEC 60807 Potential change-over switch The potential change-over switch is located between contact rows of the TERMSERIES adapter. It is used to switch the potential of the lower contact row to “+” or “-“ potential of the supply voltage. TRS 24VDC 1CO 14 NO NC 1122770000 12 14 11 12 24V A1 24V A2 A1 A2 Figure Figure 1a 1b 14 11 12 NC A1 Figure 1b A1 + 24V A1 + A2 - 24V A2 24V A1 + A2 - Figure 1a:Positive-switching logic (PNP): Potential change-over switch to “-“, installation on 24 V DC input (A1/A2). Figure 1b:Negative-switching logic (NPN): Potential change-over 1a units. switch to “+”, installation on ONLYFigure 24 V UC 12 24V A2 - Figure 1a COM 11 TRS 24VDC141CO 11 1122770000 TOS TRS A2A2 TOS NC 12 A1 TRS A1 14 11 11 12 14 A2 TRS COM 11 A1 TRS 24VDC 1CO 1122770000 PUSH IN 0.13 mm² 1.5 mm² 2 (+,−) Installation output Figure 1b Sub-D, 15-pole, DIN 41652 / IEC 60807 NO 14 COM COM 11 A1 14 11 A1 14 11 14 11 12 NC 12 TRS 24VDC 1CO 14 NO NC 1122770000 12 14 11 12 52 / 51 / 43 Figure 2a COM 11 TRS 24VDC141CO 11 1122770000 mm 11 2 III 1.5 kV 32 V IP 20 NO -40°C...+60°C -40°C...+85°C 5...95% (indoor), Tu = 40°C, no condensation V-0 cULus Listed, GL, CE 14 A1 Figure 2b 2a Figure Figure 2a:Positive-switching logic (sourced loads): Potential change2b over switch to “+”, installation on Figure output (11/14). Figure 2b:Negative-switching logic (sinked loads): Potential changeover switch to “-“, installation on output (11/14). 14 11 12 Part No. 1463530000 Suitable for 6.4 mm wide TERMSERIES base Description PAC-UNIV-D15M-F-1M Length 1.0 m Part No. 1350420010 TRS 24VDC 1CO 1122770000 Qty. 1 NC Type TIA SUBD 15S 12 Cables DB 15 to flying ferruled leads Note 14 11 Accessories NO Note 24 V DC 30 V DC 100 mA 1A 1A 8 14 Ordering data 24 V DC ± 20% Green LED COM Supply Supply voltage Status display Signals Rated voltage Voltage, max. Rated current (per signal path) Current (per signal path), max. Total current of all signals, max. Number of signal paths Connection data (supply) Wire connection method Clamping range, rated connection, min. Clamping range, rated connection, max. Number of terminals Connection data (signal) Plug type General data Ambient temperature (operational) Storage temperature Humidity UL 94 flammability rating Agency Approvals Insulation coordination Pollution degree Overvoltage category Impulse withstand voltage Rated voltage Protection degree Dimensions Depth x width x height Note NO Technical data 14 ² TOS Installation input 11 9'& ² Figure 2a Figure 2b other lengths available upon request. These cables do not have CSA or UL approval. 15 Pin D Sub to Flying Ferruled Leads 7 TERMSERIES Interface Adapter (TIA) CSA/UL Recognized Cables and Connectors Physical Characteristics Conductor Insulation Cable Jacket Electrical Characteristics Temperature Suggested Working Voltage (Vrms) Conductor D.C. Resistance Mutual Capacitance Approvals #22 AWG 7/30 Tinned Copper, 0.030“ nom. diameter 0.010“ Wall Semi-Rigid Polyvinyl Chloride, 0.050“ nom. diameter 20 conductors @ 4.5“ LHL with mylar wrap, 0.270“ nom. diameter 0.032“ Wall Polyvinyl Chloride, 0.334“ +/- 0.017“ diameter 75°C 300Vrms 16.6 Ohms/1000 ft nom 24.5 pF/ft @ 1kHz nom National Electrical Code, Article 800 UL Standard 444, Type CM UL Standard 758, AWM Style 2464 CSA International, Type CMG RoHS Compliant, Directive 2002/95/EC 10 pin connector to 10 pin connector (1:1) 20 pin to flying ferruled leads 20 pin connector to 20 pin connector (1:1) 20 pin to 2 x 10 pin connectors Note 8 10 Pin to Flying Ferruled Leads 20 Pin Connector to 20 Pin Connector Ordering Data 10 pin to flying ferruled leads Color Code 1 Black 2 White 3 Red 4 Lt. Green 5 Orange 6 Blue 7 White/Black 8 Red/Black 9 Green/Black 10 Orange/Black 11 Blue/Black 12 Black/White 13 Red/White 14 Green/White 15 Blue/White 16 Black/Red 17 White/Red 18 Orange/Red 19 Blue/Red 20 Red/Green Length* 0.5 m 1.0 m 2.0 m 3.0 m 5.0 m 0.5 m 1.0 m 2.0 m 3.0 m 5.0 m 0.5 m 1.0 m 2.0 m 3.0 m 5.0 m 0.5 m 1.0 m 2.0 m 3.0 m 5.0 m 0.5 m 1.0 m 2.0 m 3.0 m 5.0 m Description SP-CBL-TIAU-10-F 0.5M SP-CBL-TIAU-10-F 1M SP-CBL-TIAU-10-F 2M SP-CBL-TIAU-10-F 3M SP-CBL-TIAU-10-F 5M SP-CBL-TIAU-10-10 0.5M SP-CBL-TIAU-10-10 1M SP-CBL-TIAU-10-10 2M SP-CBL-TIAU-10-10 3M SP-CBL-TIAU-10-10 5M SP-CBL-TIAU-20-F 0.5M SP-CBL-TIAU-20-F 1M SP-CBL-TIAU-20-F 2M SP-CBL-TIAU-20-F 3M SP-CBL-TIAU-20-F 5M SP-CBL-TIAU-20-20 0.5M SP-CBL-TIAU-20-20 1M SP-CBL-TIAU-20-20 2M SP-CBL-TIAU-20-20 3M SP-CBL-TIAU-20-20 5M SP-CBL-TIAU-20-2X10 0.5M SP-CBL-TIAU-20-2X10 1M SP-CBL-TIAU-20-2X10 2M SP-CBL-TIAU-20-2X10 3M SP-CBL-TIAU-20-2X10 5M Part No. 6720000965 6720000966 6720000967 6720000968 6720000969 6720000960 6720000961 6720000962 6720000963 6720000964 6720000950 6720000951 6720000952 6720000953 6720000954 6720000945 6720000946 6720000947 6720000948 6720000949 6720000955 6720000956 6720000957 6720000958 6720000959 20 Pin to 2 x 10 Pin Connectors *other lengths available upon request Subject to technical changes • 08/15 • LIT1419E