Datasheet TERMOPTO Solid-State Relays The TERMOPTO compact terminal requires almost no maintenance. They feature integrated isolation of potential voltages, save space in the enclosure, reduce maintenance and optimize machine up time. Pluggable cross connections, available for terminals or Push In connection technology, reduce wiring time in installation and maintenance. TERMOPTO solid-state relays are available in 10 input voltages and 3 output voltages for standard control voltages from 5 to 230V AC and DC, with either screw or Push In terminals. The TERMOPTO product line TERMOPTO Output version 5-48 V DC 100 mA TERMOPTO Output version 5-48 V DC 500 mA TERMOPTO solid-state relays are characterized by their compact design and pluggable cross connections. Featuring opto coupler technology, the TERMOPTO provides a compact, electronic alternative to electro mechanical relays. Weidmuller, Canada Weidmuller, Mexico Weidmuller, United States 10 Spy Court Markham, Ontario L3R 5H6 Telephone: (800) 268-4080 Facsimile: (877) 300-5635 Email: [email protected] Website: www.weidmuller.ca Blvd. Hermanos Serdán 698, Col. San Rafael Oriente Puebla, Puebla, Mexico C.P. 72029 Telephone: 01 222 2686267 Facsimile: 01 222 2686219 Email: [email protected] Website: www.weidmuller.com.mx 821 Southlake Blvd. Richmond, Virginia 23236 Telephone: (800) 849-9343 Facsimile: (804) 379-2593 Email: [email protected] Website: www.weidmuller.com TERMOPTO Output version 24-230 V AC 100 mA TERMOPTO Solid-State Relays TERMOPTO output versions DC 100 mA Load side Solid-state type Nominal switching voltage / current Voltage drop at max. load Leakage current Short-circuit-proof / Protective circuit Switch-off delay / Switch-on delay Continuous current Load category General data Ambient temperature (operational) Storage temperature Flammability class UL 94 Humidity Transistor 5...48 V DC / 100 mA <1V < 10 µA No / Diode < 42 µs / < 13 ms 100 mA DC1 Approvals Standards Insulation coordination (EN 50 178) Rated voltage Rated impulse withstand voltage Clearance and creepage distances for control/load side Overvoltage category Pollution severity Dimensions Clamping range (nominal / min. / max.) Length x width x height Note Application Note The integrated protective circuit ensures sufficient protection in applications with resistive as well as slightly inductive and capacitive loads. For purely inductive, capacitive or comparable loads with high switch-on and switch-off peaks, such as solenoid valves or filament lamps, ensure that the module is dimensioned appropriately or an additional safeguard is used. 2 mm² mm -20 °C...+60 °C (-4°F...+140°F) -40 °C...+80 °C (-40°F...+176°F) V-0 5...95 % rel. humidity Tu = 40°C, no condensation cULus; CE EN 50178, IEC 62314, UL508, C22.2 No.14-10 300 V 4 kV > 3 mm III 2 Screw connection 2.5 / 0.5 / 4 74.5 / 6.1 / 55 PUSH IN connection 1.5 / 0.5 / 2.5 79.5 / 6.1 / 55 Solid-State Relays TERMOPTO TERMOPTO output versions DC 100 mA Technical data Control side Rated control voltage Power rating making voltage Dropout voltage Input frequency Status indicator Protective circuit 5 V DC 12 V DC 24 V DC 48...60 V DC 110 V DC 5 V DC < 40 mW ≥ 4 V DC ≤ 2 V DC < 3000 Hz Green LED Varistor, reverse polarity protection 12 V DC < 95 mW ≥ 9.6 V DC ≤ 4.8 V DC < 3000 Hz Green LED Varistor, reverse polarity protection 24 V DC ≤ 170 mW ≥ 19.2 V DC ≤ 9.6 V DC < 3000 Hz Green LED Varistor, reverse polarity protection 48...60 V DC < 200 mW ≥ 38.4 V AC ≤ 19.2 V DC < 500 Hz Green LED Varistor, reverse polarity protection 110 V DC < 280 mW ≥ 88 V DC ≤ 44 V DC < 500 Hz Green LED Varistor, reverse polarity protection TOS 5VDC/48VDC 0.1A 8950700000 TOS 12VDC/48VDC 0.1A TOS 24VDC/48VDC 0.1A 8950710000 8950720000 TOS 48-60VDC/48VDC 0.1A 8950730000 TOS 110VDC/48VDC 0.1A 8950740000 TOP 5VDC/48VDC 0.1A 8950760000 TOP 12VDC/48VDC 0.1A TOP 24VDC/48VDC 0.1A 8950770000 8950780000 TOP 48-60VDC/48VDC 0.1A 8950790000 TOP 110VDC/48VDC 0.1A 8950800000 220 V DC 24 V AC 48...60 V AC 120 V AC 230 V AC 220 V DC ≤ 360 mW ≥ 187 V DC ≤ 93.5 V DC < 500 Hz Green LED Varistor, reverse polarity protection 24 V AC < 0.18 VA ≥ 21.6 V AC ≤ 9.6 V AC < 10 Hz Green LED Varistor 48...60 V AC ≤ 0.2 VA ≥ 38.4 V AC ≤ 19.2 V AC < 10 Hz Green LED Varistor 120 V AC ≤ 0.3 VA ≥ 102 V AC ≤ 48 V AC < 10 Hz Green LED Varistor 230 V AC ≤ 0.4 VA ≥ 207 V AC ≤ 69 V AC < 10 Hz Green LED Varistor TOS 220VDC/48VDC 0.1A 8950750000 TOS 24VAC/48VDC 0.1A 8950820000 TOS 48-60VAC/48VDC 0.1A 8950830000 TOS 120VAC/48VDC 0.1A 8950840000 TOS 230VAC/48VDC 0.1A 8950850000 TOP 220VDC/48VDC 0.1A 8950810000 TOP 24VAC/48VDC 0.1A 8950860000 TOP 48-60VAC/48VDC 0.1A 8950870000 TOP 120VAC/48VDC 0.1A 8950880000 TOP 230VAC/48VDC 0.1A 8950890000 Ordering data Screw connection Type Part No. PUSH IN connection Type Part No. Note Technical data Control side Rated control voltage Power rating making voltage Dropout voltage Input frequency Status indicator Protective circuit Ordering data Screw connection Type Part No. PUSH IN connection Type Part No. Note 3 TERMOPTO Solid-State Relays TERMOPTO output versions DC 500 mA Load side Solid-state type Nominal switching voltage / current Voltage drop at max. load Leakage current Short-circuit-proof / Protective circuit Switch-off delay / Switch-on delay Continuous current Load category General data Ambient temperature (operational) Storage temperature Flammability class UL 94 Humidity Transistor 5...48 V DC / 500 mA <1V < 10 µA No / Diode < 200 µs / < 20 µs 500 mA DC1 Approvals Standards Insulation coordination (EN 50 178) Rated voltage Rated impulse withstand voltage Clearance and creepage distances for control/load side Overvoltage category Pollution severity Dimensions Clamping range (nominal / min. / max.) Length x width x height Note Application Note The integrated protective circuit ensures sufficient protection in applications with resistive as well as slightly inductive and capacitive loads. For purely inductive, capacitive or comparable loads with high switch-on and switch-off peaks, such as solenoid valves or filament lamps, ensure that the module is dimensioned appropriately or an additional safeguard is used. 4 mm² mm -20 °C...+60 °C (-4°F...+140°F) -40 °C...+80 °C (-40°F...+176°F) V-0 5...95 % rel. humidity Tu = 40°C, no condensation cULus; CE EN 50178, IEC 62314, UL508, C22.2 No.14-10 300 V 4 kV > 3 mm III 2 Screw connection 2.5 / 0.5 / 4 74.5 / 6.1 / 55 PUSH IN connection 1.5 / 0.5 / 2.5 79.5 / 6.1 / 55 Solid-State Relays TERMOPTO TERMOPTO output versions DC 500 mA Technical data Control side Rated control voltage Power rating making voltage Dropout voltage Input frequency Status indicator Protective circuit 5 V DC 12 V DC 24 V DC 48...60 V DC 110 V DC 5 V DC < 40 mW ≥ 4 V DC ≤ 2 V DC < 200 Hz Green LED Varistor, reverse polarity protection 12 V DC < 95 mW ≥ 9.6 V DC ≤ 4.8 V DC < 200 Hz Green LED Varistor, reverse polarity protection 24 V DC ≤ 170 mW ≥ 19.2 V DC ≤ 9.6 V DC < 200 Hz Green LED Varistor, reverse polarity protection 48...60 V DC < 200 mW ≥ 38.4 V AC ≤ 19.2 V DC < 200 Hz Green LED Varistor, reverse polarity protection 110 V DC < 280 mW ≥ 88 V DC ≤ 44 V DC < 200 Hz Green LED Varistor, reverse polarity protection TOS 5VDC/48VDC 0.5A 8950900000 TOS 12VDC/48VDC 0.5A TOS 24VDC/48VDC 0.5A 8950910000 8950920000 TOS 48-60VDC/48VDC 0.5A 8950930000 TOS 110VDC/48VDC 0.5A 8950940000 TOS 5VDC/48VDC 0.5A 8950960000 TOP 12VDC/48VDC 0.5A TOP 24VDC/48VDC 0.5A 8950970000 8950980000 TOP 48-60VDC/48VDC 0.5A 8950990000 TOP 110VDC/48VDC 0.5A 8951000000 220 V DC 24 V AC 48...60 V AC 120 V AC 230 V AC 220 V DC ≤ 360 mW ≥ 187 V DC ≤ 93.5 V DC < 200 Hz Green LED Varistor, reverse polarity protection 24 V AC < 0.18 VA ≥ 21.6 V AC ≤ 9.6 V AC < 10 Hz Green LED Varistor 48...60 V AC ≤ 0.2 VA ≥ 38.4 V AC ≤ 19.2 V AC < 10 Hz Green LED Varistor 120 V AC ≤ 0.3 VA ≥ 102 V AC ≤ 48 V AC < 10 Hz Green LED Varistor 230 V AC ≤ 0.4 VA ≥ 207 V AC ≤ 69 V AC < 10 Hz Green LED Varistor TOS 220VDC/48VDC 0.5A 8950950000 TOS 24VAC/48VDC 0.5A 8951020000 TOS 48-60VAC/48VDC 0.5A 8951030000 TOS 120VAC/48VDC 0.5A 8951040000 TOS 230VAC/48VDC 0.5A 8951050000 TOP 220VDC/48VDC 0.5A 8951010000 TOP 24VAC/48VDC 0.5A 8951060000 TOP 48-60VAC/48VDC 0.5A 8951070000 TOP 120VAC/48VDC 0.5A 8951080000 TOP 230VAC/48VDC 0.5A 8951090000 Ordering data Screw connection Type Part No. PUSH IN connection Type Part No. Note Technical data Control side Rated control voltage Power rating making voltage Dropout voltage Input frequency Status indicator Protective circuit Ordering data Screw connection Type Part No. PUSH IN connection Type Part No. Note 5 TERMOPTO Solid-State Relays TERMOPTO output versions AC 100 mA Load side Solid-state type Nominal switching voltage / current Voltage drop at max. load Leakage current Short-circuit-proof / Protective circuit Switch-off delay / Switch-on delay Continuous current Load category General data Ambient temperature (operational) Storage temperature Flammability class UL 94 Humidity Triac 24...230 V AC / 100 mA < 1.8 V < 10 µA No / Varistor 100 mA AC1 Approvals Standards Insulation coordination (EN 50 178) Rated voltage Rated impulse withstand voltage Clearance and creepage distances for control/load side Overvoltage category Pollution severity Dimensions Clamping range (nominal / min. / max.) Length x width x height Note Application Note The integrated protective circuit ensures sufficient protection in applications with resistive as well as slightly inductive and capacitive loads. For purely inductive, capacitive or comparable loads with high switch-on and switch-off peaks, such as solenoid valves or filament lamps, ensure that the module is dimensioned appropriately or an additional safeguard is used. 6 mm² mm -20 °C...+60 °C (-4°F...+140°F) -40 °C...+80 °C (-40°F...+176°F) V-0 5...95 % rel. humidity Tu = 40°C, no condensation cULus; CE EN 50178, IEC 62314, UL508, C22.2 No.14-10 300 V 4 kV > 3 mm III 2 Screw connection 2.5 / 0.5 / 4 74.5 / 6.1 / 55 PUSH IN connection 1.5 / 0.5 / 2.5 79.5 / 6.1 / 55 Solid-State Relays TERMOPTO TERMOPTO output versions AC 100 mA Technical data Control side Rated control voltage Power rating making voltage Dropout voltage Input frequency Status indicator Protective circuit 5 V DC 12 V DC 24 V DC 48...60 V DC 110 V DC 5 V DC < 40 mW ≥ 4 V DC ≤ 2 V DC < 10 Hz Green LED Varistor, reverse polarity protection 12 V DC < 45 mW ≥ 9.6 V DC ≤ 4.8 V DC < 10 Hz Green LED Varistor, reverse polarity protection 24 V DC ≤ 80 mW ≥ 19.2 V DC ≤ 9.6 V DC < 10 Hz Green LED Varistor, reverse polarity protection 48...60 V DC < 170 mW ≥ 38.4 V DC ≤ 19.2 V DC < 10 Hz Green LED Varistor, reverse polarity protection 110 V DC < 360 mW ≥ 88 V DC ≤ 44 V DC < 10 Hz Green LED Varistor, reverse polarity protection TOS 5VDC/230VAC 0.1A 8951100000 TOS 12VDC/230VAC 0.1A TOS 24VDC/230VAC 0.1A 8951110000 8951120000 TOS 48-60VDC/230VAC 0.1A 8951130000 TOS 110VDC/230VAC 0.1A 8951140000 TOP 5VDC/230VAC 0.1A 8951160000 TOP 12VDC/230VAC 0.1A TOP 24VDC/230VAC 0.1A 8951170000 8951180000 TOP 48-60VDC/230VAC 0.1A 8951190000 TOP 110VDC/230VAC 0.1A 8951200000 220 V DC 24 V AC 48...60 V AC 120 V AC 230 V AC 220 V DC ≤ 640 mW ≥ 187 V DC ≤ 93.5 V DC < 10 Hz Green LED Varistor, reverse polarity protection 24 V AC < 0.2 VA ≥ 21.6 V AC ≤ 9.6 V AC < 10 Hz Green LED Varistor 48...60 V AC ≤ 0.3 VA ≥ 38.4 V AC ≤ 19.2 V AC < 10 Hz Green LED Varistor 120 V AC ≤ 0.8 VA ≥ 102 V AC ≤ 48 V AC < 10 Hz Green LED Varistor 230 V AC ≤ 1.38 VA ≥ 207 V AC ≤ 69 V AC < 10 Hz Green LED Varistor TOS 220VDC/230VAC 0.1A 8951150000 TOS 24VAC/230VAC 0.1A 8951220000 TOS 48-60VAC/230VAC 0.1A 8951230000 TOS 120VAC/230VAC 0.1A 8951240000 TOS 230VAC/230VAC 0.1A 8951250000 TOP 220VDC/230VAC 0.1A 8951210000 TOP 24VAC/230VAC 0.1A 8951260000 TOP 48-60VAC/230VAC 0.1A 8951270000 TOP 120VAC/230VAC 0.1A 8951280000 TOP 230VAC/230VAC 0.1A 8951290000 Ordering data Screw connection Type Part No. PUSH IN connection Type Part No. Note Technical data Control side Rated control voltage Power rating making voltage Dropout voltage Input frequency Status indicator Protective circuit Ordering data Screw connection Type Part No. PUSH IN connection Type Part No. Note 7 TERMOPTO Solid-State Relays Accessories General data – TERMOPTO Plug-in cross-connection No. of poles Technical data Type yellow ZQV 4N / 2 GE Qty. Part No. 2 60 1758250000 ZQV 4N / 3 GE ZQV 4N / 4 GE ZQV 4N / 10 GE 3 4 10 60 60 20 1762630000 1762620000 1758260000 ZQV 4N / 20 GE red ZQV 4N / 2 RT 20 20 1909020000 2 60 1793950000 ZQV 4N / 3 RT ZQV 4N / 4 RT ZQV 4N / 10 RT 3 4 10 60 60 20 1793980000 1794010000 1794040000 ZQV 4N / 20 RT blue ZQV 4N / 2 BL 20 20 1909150000 2 60 1793960000 ZQV 4N / 3 BL ZQV 4N / 4 BL ZQV 4N / 10 BL 3 4 10 60 60 20 1793990000 1794020000 1794050000 ZQV 4N / 20 BL black ZQV 4N / 2 SW 20 20 1909100000 2 60 1793970000 ZQV 4N / 3 SW ZQV 4N / 4 SW ZQV 4N / 10 SW 3 4 10 60 60 20 1794000000 1794030000 1794060000 ZQV 4N / 20 SW 20 20 1909120000 Qty. Part No. 600 1609900000 10 1686360000 10 9008330000 Other accessories Conductor Solid H07V-U Stranded H07V-K “f” with wire end ferrules to DIN 46228-1 “f” with wire end ferrules with plastic collar Max. clamping range mm2 / AWG PUSH IN connection 0.5…1.5 / 20…16 Screw connection 0.5…2.5 / 20…14 mm2 / AWG mm2 / AWG mm2 / AWG mm2 / AWG 0.5…1.5 / 20…16 0.5…1.5 / 20…16 0.5…1.5 / 20…16 0.13...1.5 / 26…16 0.5…2.5 / 20…14 0.5…1.5 / 20…16 0.5…1.5 / 20…16 0.13…2.5 / 26…14 A2 A3 0.6 Plug gauge to IEC 60947-1 General technical data Nominal torque size Nm - Continuous current for 2-pole cross-connection Continuous current for multi-pole cross-connection Stripping length Ingress protection class Housing material UL 94 flammability rating Nominal current Nominal voltage A A mm 10 10 10 10 10 9 IP 20 Wemid V-0 6 250 IP 20 Wemid V-0 6 250 A V Dimensions Type Markers WS 12/6 Labels, Lasermark 12 x 6 mm LM MT 300 15/6 ge 484 labels/sheet Screwdriver SD 0.6 x 3.5 x 100 Screwdriver – blade shape 8 Subject to technical changes • 2/11-LIT1103