Download

Datasheet
MICROSERIES C1D2 Relays
NEW
The MICROSERIES C1D2 Relay module can be used
as a universal interface between the controller and
the actuator to switch small and medium-sized loads.
•
•
•
•
•
•
•
•
C1D2 approved for use in hazardous locations
Relay module interchangeable
Space-saving 6.1 mm width
Pluggable cross-connection at input and output
minimizes the wiring workload
VUC versions accept AC and DC input, reducing
variations in inventory
Integrated RC circuit at input available, protecting
from leakage current on control side
Integrated polarity protection for quick and safe
installation of the relays
Integrated LED status indicators for easy and instant
troubleshooting and minimized machine downtime
Canada
Mexico
United States
Weidmuller, Canada
10 Spy Court
Markham, Ontario L3R 5H6
Telephone: (800) 268-4080
Facsimile: (905) 475-2798
Email: [email protected]
Website: www.weidmuller.ca
Weidmuller, Mexico
Blvd. Hermanos Serdán 698
Col. San Rafael Oriente
Puebla, Puebla, Mexico
C.P. 72029
Telephone: 01 222 2686267
Facsimile: 01 222 2686219
Email: [email protected]
Website: www.weidmuller.com.mx
Weidmuller
821 Southlake Blvd.
Richmond, Virginia 23236
Telephone: (800) 849-9343
Facsimile: (804) 379-2593
Email: [email protected]
Website: www.weidmuller.com
Relays - MICROSERIES
C 1 D 2 a p p ro v e d
1 change-over contact
AC/DC/UC coil
Technical data
11
14
A2
(12 V DC)
12
A1
11
(24 V DC)
14
A2
12
A1
11
(24 V UC)
14
A2
12
A1
Output
max. switching voltage AC1/Continuous current
min. switching power
Response time / Drop-out time
Contact base material
Mechanical endurance
max. switching frequency at rated load
Rated data
Status indicator/Free wheel diode
Reverse pol. prot
Ambient temperature (operational)
Storage temperature
Humidity
Approvals
Insulation coordination (EN 50178)
Standards
Rated voltage
Impulse withstand voltage
Clearance and creepage distances for control/load side
Surge category
Pollution severity
Protective separation to VDE 0106 part 101
Dimensions
Clamping range (rating- / min. / max.)
mm2
Length x width x height
mm
Note
250 V/6 A
12 V / 100 mA
6.2ms/3.9ms
AgSnO
20*106 switching cycles
0.1 Hz
green LED/Yes
available
-25 °C…+50 °C
-40 °C…+60 °C
40°C/93% RH, no condensation
CE; cULus; C1D2
EN 50178
300 V
4 kV
≥ 5.5 mm
III
2
Yes
Screw connection
2.5 / 0.5 / 4
93 / 6.1 / 92
Cross-connectors and markers - refer to MICROSERIES accessories
Ordering data
Input
Rated voltage
Rated current AC
Rated current DC
Power rating
AC Response/dropout Volt
DC Response/dropout Volt
AC pickup/dropout current
DC pickup/dropout current
Relay with socket
Screw connection
12 VDC 1CO
12 V DC ±20%
24 V DC 1CO
24 V DC ±20 %
17 mA
210 mW
6.6mA
160 mW
6.4V/ 2.5V
15.4V/6.5V
8.4mA/2.4mA
4mA/1.2mA
24 V UC 1CO
24 V UC ±10 %
11 mA
6.4 mA
154 mW
15.8V/7V
15.8V/7V
3.6mA/1.3mA
3.6mA/1.3mA
Type
Order No.
MRS 12Vdc 1CO C1D2
8967340000
MRS 24Vdc 1CO C1D2
8967350000
MRS 24Vuc 1CO C1D2
8967360000
Type
Order No.
RSS113012 12Vdc-Rel1U
4061610000
RSS113024 24Vdc-Rel1U
4060120000
RSS113024 24Vdc-Rel1U
4060120000
Spare relay (pluggable)*
Note
*Spare relays do not feature individual C1D2 approval.
2
C 1 D 2 a p p ro v e d
Relays - MICROSERIES
1 change-over contact
AC/DC/UC coil
•
120 VAC RC version:
RC circuit at the input guarantees safe
switching thresholds, e.g. for leakage currents
on the control side
Technical data
11
(120 V AC RC)
14
A2
12
A1
11
(230 V UC)
14
A2
12
A1
Output
max. switching voltage AC1/Continuous current
min. switching power
Response time / Drop-out time
Contact base material
Mechanical endurance
max. switching frequency at rated load
Rated data
Status indicator/Free wheel diode
Reverse pol. prot
Ambient temperature (operational)
Storage temperature
Humidity
Approvals
Insulation coordination (EN 50178)
Standards
Rated voltage
Impulse withstand voltage
Clearance and creepage distances for control/load side
Surge category
Pollution severity
Protective separation to VDE 0106 part 101
Dimensions
Clamping range (rating- / min. / max.)
mm2
Length x width x height
mm
Note
250 V/6 A
12 V / 100 mA
6.6ms/5.8ms
AgSnO
20*106 switching cycles
0.1 Hz
green LED/Yes
available
-25 °C…+55 °C
-40 °C…+60 °C
40°C/93% RH, no condensation
CE; cULus; C1D2
EN 50178
300 V
4 kV (1.2/50 µs)
≥ 5.5 mm
III
2
Screw connection
2.5 / 0.5 / 4
93 / 6.1 / 92
Cross-connectors and markers - refer to MICROSERIES accessories
Ordering data
120 V AC 1CO RC
120 V AC + 10 %/ -15 %
7 mA
Input
Rated voltage
Rated current AC
Rated current DC
Power rating
AC Response/dropout Volt
DC Response/dropout Volt
AC pickup/dropout current
DC pickup/dropout current
Relay with socket
Screw connection
0.84 VA
79 V / 65 V
4.5 mA / 3.7 mA
230 V UC 1CO
230 V UC +10 % / -15 %
3.5 mA
2.9 mA
0.8 VA / 660 mW
146 V / 124 V
155 V / 115 V
1.9 mA / 1.5 mA
1.9 mA / 1.0 mA
Type
Order No.
MRS 120VUC 1CO RC C1D2
8967370000
MRS 230VUC 1CO C1D2
8967380000
Type
Order No.
RSS113060 60Vdc-Rel1U
4061630000
RSS113060 60Vdc-Rel1U
4061630000
Spare relay (pluggable)*
Note
*Spare relays do not feature individual C1D2 approval.
3
Relays - MICROSERIES
Accessories
General data - MICROSERIES
Technical data
Plug-in cross-connection
Type
yellow
ZQV 4N / 2 GE
ZQV 4N / 3 GE
C 1 D 2 a p p ro v e d
No. of poles
ZQV 4N / 4 GE
ZQV 4N / 10 GE
ZQV 4N / 20 GE
red
ZQV 4N / 2 RT
ZQV 4N / 3 RT
ZQV 4N / 4 RT
ZQV 4N / 10 RT
ZQV 4N / 20 RT
blue
ZQV 4N / 2 BL
ZQV 4N / 3 BL
ZQV 4N / 4 BL
ZQV 4N / 10 BL
ZQV 4N / 20 BL
black
ZQV 4N / 2 SW
ZQV 4N / 3 SW
ZQV 4N / 4 SW
ZQV 4N / 10 SW
ZQV 4N / 20 SW
Qty
2
3
60
60
1758250000
1762630000
4
10
20
60
20
20
1762620000
1758260000
1909020000
2
3
4
10
20
60
60
60
20
20
1793950000
1793980000
1794010000
1794040000
1909150000
2
3
4
10
20
60
60
60
20
20
1793960000
1793990000
1794020000
1794050000
1909100000
2
3
4
10
20
60
60
60
20
20
1793970000
1794000000
1794030000
1794060000
1909120000
Conductor
Solid H07V-U
Stranded H07V-K
“f” with wire end ferrules to DIN 46228-1
“f” with wire end ferrules with plastic collar
Max. clamping range
Plug gauge to IEC 60947-1
General technical data
Nominal torque
Continuous current for 2-pole cross-connection
Continuous current for multi-pole cross-connection
Stripping length
Ingress protection class
Housing material
UL 94 flammability rating
Nominal current
Nominal voltage
mm2
mm2
mm2
size
0.5 … 1.5
0.5 … 1.5
0.13 … 4.0
A3
A
A
mm
A
V
0.6
10
10
7
IP 20
Wemid
V-0
6
250
Dimensions
Other accessories
Qty
Order No.
600
1609900000
10
1686360000
10
9008330000
Screw connection
92 mm
Type
Markers
WS 12/6
12 x 6 mm
Labels, Lasermark
LM MT 300 15/6 ge 484 labels/sheet
Screwdriver
SD 0.6 x 3.5 x 100
mm2
mm2
Screw
connection
0.5 … 4.0
0.5 … 2.5
Order No.
6.1 mm
93 mm
4
Subject to technical changes • 12/08-2.5M-LIT0813