M2300 series H2300 series VCXO 3.3V Full/Half size, Thru-hole, HCMOS/TTL Features ¾ ¾ RoHS Status Excellent incremental and best-straight-line linearity Start-up time is less than 5ms Applications ¾ ¾ ¾ xDSL customer premise equipment Cable modems ATM/SONET/SDH 3Electrical MHz to 55MHz Specifications Parameter Frequency Range Frequency Stability Symbol Supply Current ∆F/F ± 20 First Year After First Year 3 1 0° 3.0 1 KHz to 10 MHz 10.1 to 25 MHz 25.1 to 50 MHz 50.1 to 75 MHz 75.1 to 125 MHz “0” Level, sinking 16mA “1” Level, sourcing 8mA 3 4 6 2 3 15 pf 30 pf Input Impedance 3.3 8 15 20 25 30 Max Unit 150 MHz ± 50 ppm Control voltage 15 Ts @ 50% VDD 48/52 Control Voltage Bandwidth 15 APR Note ppm ppm/yr +70° °C 3.6 14 20 30 35 40 0.4 V VDD-0.4 15 pf 30 pf 50 pf Rise & Fall Times Symmetry Operating Temperature at 25°C Vcc Icc Typ 1 T Output Levels Start-up Time Min F Aging Operating Temperature Supply Voltage Condition 4 5 8 mA V 20 to 80% (<60MHz) ns 2.5 4.5 20 to 80% (>60MHz) 1000 KOhm 5 ms 45/55 % 150 KHz ± 150 ppm 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-497-6377 • FAX 508-435-5289 • www.valpeyfisher.com • RevA_1007 1 M2300 series H2300 series VCXO 3.3V Full/Half size, Thru-hole, HCMOS/TTL Environmental and Mechanical Conditions Parameter Shock Vibration Specification 1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane 10-2000 Hz of .06" d.a. or 20 Gs, whichever is less Humidity Resistant to 85° R.H. at 85°C Gross Leak Each unit checked in 125°C fluorocarbon Fine Leak Mass spectrometer leak rate less than 2 X 10-8 atm, cc/sec of helium Pins Kovar, nickel plated with 60/40 solder coat Bend Test Will withstand two bends of 90° from reference Header Steel, with nickel plate Case Stainless steel, type 304 Marking Printing is black epoxy ink or laser marked Resistance to Solvents MIL STD 202, Method 215 Center Frequency is Between Two Voltages DESCRIPTIONS M2306, H2306 M2321, H2321 Center Frequency is at 1.5V with ±50 ppm stability M2322, H2322 M2331, H2331 Center Frequency is at 1.5V with ±50 ppm stability M2332, H2332 M2341, H2341 M2342, H2342 ±150 ppm, min. deviation when using 0 to 3 control‐voltage ±75 ppm capture when using using 0.5 to 2.5V control‐voltage and 1.5V center with ±50 ppm stability ±100 ppm capture when using using 0.5 to 2.5V control‐voltage and 1.5V center with ±50 ppm stability ±75 ppm capture when using using 0.5 to 2.5V control‐voltage and 1.5V center with ±25 ppm stability ±100 ppm capture when using using 0.5 to 2.5V control‐voltage and 1.5V center with ±25 ppm stability ±75 ppm capture when using using 0.5 to 2.5V control‐voltage and 1.5V center with ±20 ppm stability ±100 ppm capture when using using 0.5 to 2.5V control‐voltage and 1.5V center with ±20 ppm stability Center Frequency is at 1.5V with ±50 ppm stability 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-497-6377 • FAX 508-435-5289 • www.valpeyfisher.com • RevA_1007 2 M2300 series H2300 series VCXO 3.3V Full/Half size, Thru-hole, HCMOS/TTL Pin # Full size (M) Half size (H) 1 Control Voltage Control Voltage 4 N/C Ground & Case 5 N/C Output 7 Ground & Case N/C 8 Output +3.3V, VDD 14 +3.3V, VDD N/C Frequency Deviation, ppm Frequency vs. Control Voltage for M2331-16M Control Voltage, Vc HOW TO ORDER M - “M” is full size DIL “H” is half size DIL 2 3 0 6 - FREQ. “2306” is model type G Leave blank for straight leads Add “G” for gullwig 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-497-6377 • FAX 508-435-5289 • www.valpeyfisher.com • RevA_1007 3