M3200 series H3200 series VCXO 5.0V Full/Half size, Thru-hole, HCMOS/TTL RoHS Status Features ¾ ¾ ¾ ¾ Super low jitter of 20 ps peak to peak Frequency from 3 MHz to 105 MHz APR to ±150ppm Start-up time is less than 5ms Applications ¾ xDSL customer premise equipment ¾ ATM/SONET/SDH 3 MHz 55MHz ¾ to Cable modems Electrical Specifications Parameter Frequency Range Frequency Stability Symbol Condition Min F ∆F/F Aging 3 Operating Temperature at 25°C ± 30 First Year After First Year 3 1 Operating Temperature Supply Voltage T 0° Vcc 4.5 Supply Current Icc “0” Level, sinking 16mA “1” Level, sourcing 10mA Output Levels Rise & Fall Times Peak Jitter Tristate Input Impedance Start-up Time Symmetry Max Unit 105 MHz ± 50 ppm Note ppm ppm/yr +70° °C 5.0 5.5 V 30 45 0.4 mA VDD-0.4 V 2.5 4 ns 2 20 ps “1” Output is On – Pin 5 may float or 2.4V min, sourcing 400μa “0” Output is disabled, tristate, high impedance – Pin 5 requires 0.4V, sinking 400μa From 0.4 to (VDD-.4) V (Above 35 MHz) 1σ Typ Control voltage 15 1000 Ts @ VDD/2 Control Voltage Bandwidth 15 20 APR ± 50 ± 75 KOhm 5 ms 45/55 % KHz ± 150 ppm 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-497-6377 • FAX 508-435-5289 • www.valpeyfisher.com • RevA_1007 1 M3200 series H3200 series VCXO 5.0V Full/Half size, Thru-hole, HCMOS/TTL Environmental and Mechanical Conditions Parameter Shock Vibration Specification 1000 Gs, 0.35 ms, 1/2 sine wave, 3 shocks in each plane 10-2000 Hz of .06" d.a. or 20 Gs, whichever is less Humidity Resistant to 85° R.H. at 85°C Gross Leak Each unit checked in 125°C fluorocarbon Fine Leak Bend Test Mass spectrometer leak rate less than 2 X 10-8 atm, cc/sec of helium Kovar, nickel plated with 60/40 solder coat, or 7 microinch gold Will withstand two bends of 90° from reference Header Steel, with nickel plate, or 7 microinch gold over nickel Case Stainless steel, type 304 Marking Resistance to Solvents Printing is black epoxy ink MIL STD 202, Method 215 Pins DESCRIPTIONS Center Frequency is at 2.5V with ±50 ppm stability M3261, H3261 M3262, H3262 M3263, H3263 M3271, H3271 Center Frequency is at 2.5V with ±25 ppm stability M3272, H3272 M3273, H3273 M3281, H3281 M3282, H3282 Center Frequency is at 2.5V with ±20 ppm stability M3283, H3283 ±75 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with ±50 ppm stability ±100 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with ±50 ppm stability ±150 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with ±50 ppm stability ±75 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with ±25 ppm stability ±100 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with ±25 ppm stability ±150 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with ±25 ppm stability ±75 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with ±20 ppm stability ±100 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with ±20 ppm stability ±150 ppm capture when using using 0.5 to 4.5V control-voltage and 2.5V center with ±20 ppm stability 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-497-6377 • FAX 508-435-5289 • www.valpeyfisher.com • RevA_1007 2 M3200 series H3200 series VCXO 5.0V – Full/Half size, Thru-hole, HCMOS/TTL HOW TO ORDER M - 3 “M” is full size DIL “H” is half size DIL Pin # Full size (M) Half size (H) 1 N/C Control Voltage 2 Control Voltage Tristate 4 N/C Ground & Case 5 Tristate Output 7 Ground & Case N/C 8 Output +5V, VDD 9 N/C N/C 14 +5V, VDD N/C 2 6 1 - FREQ. “3261” is model type G Leave blank for straight leads Add “G” for gullwig Frequency Deviation, ppm FREQUENCY VS. CONTROL VOLTAGE FOR TYPICAL DEVICE 75 South Street, Hopkinton, MA 01748 • 800-982-5737 • 508-497-6377 • FAX 508-435-5289 • www.valpeyfisher.com • RevA_1007 3