PIC16(L)F1512/3 28-Pin Flash Microcontrollers with XLP Technology High-Performance RISC CPU: • C Compiler Optimized Architecture • Only 49 Instructions • Up to 7 Kbytes Linear Program Memory Addressing • Up to 256 Bytes Linear Data Memory Addressing • Operating Speed: - DC – 20 MHz clock input @ 2.5V - DC – 16 MHz clock input @ 1.8V - DC – 200 ns instruction cycle • Interrupt Capability with Automatic Context Saving • 16-Level Deep Hardware Stack with Optional Overflow/Underflow Reset • Direct, Indirect and Relative Addressing modes: - Two full 16-bit File Select Registers (FSRs) - FSRs can read program and data memory Flexible Oscillator Structure: • 16 MHz Internal Oscillator Block: - Factory calibrated to ± 1%, typical - Software selectable frequency range from 16 MHz to 31 kHz • 31 kHz Low-Power Internal Oscillator • External Oscillator Block with: - Four crystal/resonator modes up to 20 MHz - Three external clock modes up to 20 MHz • Fail-Safe Clock Monitor: - Allows for safe shutdown if peripheral clock stops • Two-Speed Oscillator Start-up • Oscillator Start-up Timer (OST) Analog Features: • Analog-to-Digital Converter (ADC): - 10-bit resolution - Up to 17 channels - Special Event Triggers - Conversion available during Sleep - Hardware Capacitive Voltage Divider (CVD) - Double sample conversions - Two result registers - Inverted acquisition - 7-bit pre-charge timer - 7-bit acquisition timer - Two guard ring output drives - Adjustable sample and hold capacitor array • Voltage Reference module: - Fixed Voltage Reference (FVR) with 1.024V, 2.048V and 4.096V output levels • Integrated Temperature Indicator 2011-2012 Microchip Technology Inc. Extreme Low-Power Management PIC16LF1512/3 with nanoWatt XLP: • Sleep mode: 20 nA @ 1.8V, typical • Watchdog Timer: 300 nA @ 1.8V, typical • Secondary Oscillator: 600 nA @ 32 kHz, 1.8V, typical • Operating Current: 30 A/MHz @ 1.8V, typical Special Microcontroller Features: • Operating Voltage Range: - 2.3V-5.5V (PIC16F1512/3) - 1.8V-3.6V (PIC16LF1512/3) • Self-Programmable under Software Control • Power-on Reset (POR) • Power-up Timer (PWRT) • Programmable Low-Power Brown-out Reset (LPBOR) • Extended Watchdog Timer (WDT) • In-Circuit Serial Programming™ (ICSP™) via Two Pins • In-Circuit Debug (ICD) via Two Pins • Enhanced Low-Voltage Programming (LVP) • Programmable Code Protection • Low-Power Sleep mode • 128 Bytes High-Endurance Flash: - 100,000 write Flash endurance (minimum) Peripheral Highlights: • Up to 25 I/O Pins (1 input-only pin): - High current sink/source 25 mA/25 mA - Individually programmable weak pull-ups - Individually programmable interrupt-on-change (IOC) pins • Timer0: 8-Bit Timer/Counter with 8-Bit Prescaler • Enhanced Timer1: - 16-bit timer/counter with prescaler - External Gate Input mode - Low-power 32 kHz secondary oscillator driver • Timer2: 8-Bit Timer/Counter with 8-Bit Period Register, Prescaler and Postscaler • Two Capture/Compare (CCP) modules: • Master Synchronous Serial Port (MSSP) with SPI and I2CTM with: - 7-bit address masking - SMBus/PMBusTM compatibility • Enhanced Universal Synchronous Asynchronous Receiver Transmitter (EUSART) module: - RS-232, RS-485 and LIN compatible - Auto-Baud Detect - Auto-wake-up on start Advance Information DS41610B-page 1 PIC16(L)F1512/3 FIGURE 1: Debug(1) XLP PIC16(L)F1512 (1) 2048 128 25 17 Y 2/1 1 1 PIC16(L)F1513 (1) 4096 256 25 17 Y 2/1 1 1 PIC16(L)F1516 (2) 8192 512 25 17 N 2/1 1 1 PIC16(L)F1517 (2) 8192 512 36 28 N 2/1 1 1 PIC16(L)F1518 (2) 16384 1024 25 17 N 2/1 1 1 PIC16(L)F1519 (2) 16384 1024 36 28 N 2/1 1 1 PIC16(L)F1526 (3) 8192 768 54 30 N 6/3 2 2 PIC16(L)F1527 (3) 16384 1536 54 30 N 6/3 2 2 Note 1: I - Debugging, Integrated on Chip; H - Debugging, Requires Debug Header. 2: One pin is input-only. Data Sheet Index: (Unshaded devices are described in this document.) 1: Future Product PIC16(L)F1512/13 Data Sheet, 28-Pin Flash, 8-bit Microcontrollers. 2: DS41452 PIC16(L)F1516/7/8/9 Data Sheet, 28/40/44-Pin Flash, 8-bit MCUs. 3: DS41458 PIC16(L)F1526/27 Data Sheet, 64-Pin Flash, 8-bit MCUs. CCP MSSP (I2C™/SPI) EUSART Timers (8/16-bit) Advanced Control 10-bit (ch) I/O’s(2) ADC Data SRAM (bytes) Program Memory Flash (words) Device Data Sheet Index PIC16(L)F151X/152X Family Types 2 2 2 2 2 2 10 10 I I I I I I I I Y Y Y Y Y Y Y Y 28-PIN SPDIP, SOIC, SSOP PACKAGE DIAGRAM FOR PIC16(L)F1512/3 28-Pin SPDIP, SOIC, SSOP DS41610B-page 2 1 28 RB7/ICSPDAT/ICDDAT RA0 2 27 RB6/ICSPCLK/ICDCLK RA1 3 26 RB5 RA2 4 25 RB4 RA3 5 24 RB3 RA4 6 23 RB2 RA5 7 RB1 VSS 8 22 21 RA7 9 20 VDD RA6 10 19 VSS RC0 11 18 RC7 RC1 12 17 RC6 RC2 13 16 RC5 RC3 14 15 RC4 PIC16F1512/3 PIC16LF1512/3 VPP/MCLR/RE3 Advance Information RB0 2011-2012 Microchip Technology Inc. PIC16(L)F1512/3 FIGURE 2: 28-PIN UQFN (4X4) PACKAGE DIAGRAM FOR PIC16(L)F1512/3 28 27 26 25 24 23 22 RA1 RA0 RE3/MCLR/VPP RB7/ICSPDAT/ICDDAT RB6/ICSPCLK/ICDCLK RB5 RB4 28-Pin UQFN PIC16F1512/3 PIC16LF1512/3 8 9 10 11 12 13 14 1 2 3 4 5 6 7 21 20 19 18 17 16 15 RB3 RB2 RB1 RB0 VDD VSS RC7 RC0 RC1 RC2 RC3 RC4 RC5 RC6 RA2 RA3 RA4 RA5 VSS RA7 RA6 2011-2012 Microchip Technology Inc. Advance Information DS41610B-page 3 PIC16(L)F1512/3 — — — SS(2) — — — — — — — — — — CCP Basic AN0 AN1 Pull-up MSSP 27 28 Timers 2 3 A/D RA0 RA1 I/O EUSART Interrupt 28-PIN ALLOCATION TABLE (PIC16(L)F1512/3) 28-Pin UQFN 28-Pin SPDIP, SOIC, SSOP TABLE 1: RA2 4 1 AN2 — — — — — — — RA3 5 2 AN3/VREF+ — — — — — — — RA4 6 3 — T0CKI — — — — — — RA5 7 4 AN4 — — — SS(1) — — VCAP RA6 10 7 — — — — — — — OSC2/CLKOUT RA7 9 6 — — — — — — — OSC1/CLKIN RB0 21 18 AN12 — — — — INT/IOC Y — RB1 22 19 AN10 — — — — IOC Y — — RB2 23 20 AN8 — — — — IOC Y RB3 24 21 AN9 — CCP2(2) — — IOC Y — RB4 25 22 AN11 ADOUT — — — — IOC Y — RB5 26 23 AN13 T1G — — — IOC Y — RB6 27 24 ADGRDA — — — — IOC Y ICSPCLK/ICDCLK ICSPDAT/ICDDAT RB7 28 25 ADGRDB — — — — IOC Y RC0 11 8 — SOSCO/T1CKI — — — — — — RC1 12 9 — SOSCI CCP2(1) — — — — — RC2 13 10 AN14 — CCP1 — — — — — RC3 14 11 AN15 — — — SCK/SCL — — — RC4 15 12 AN16 — — — SDI/SDA — — — RC5 16 13 AN17 — — — SDO — — — — RC6 17 14 AN18 — — TX/CK — — — RC7 18 15 AN19 — — RX/DT — — — — RE3 1 26 — — — — — — Y MCLR/VPP 20 17 VDD VSS NC 8,19 5,16 — Note 1: 2: — — — — — — — — — — — — — — — — — — — — — — — — — Peripheral pin location selected using APFCON register. Default location. Peripheral pin location selected using APFCON register. Alternate location. DS41610B-page 4 Advance Information 2011-2012 Microchip Technology Inc. Note the following details of the code protection feature on Microchip devices: • Microchip products meet the specification contained in their particular Microchip Data Sheet. • Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the intended manner and under normal conditions. • There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data Sheets. Most likely, the person doing so is engaged in theft of intellectual property. • Microchip is willing to work with the customer who is concerned about the integrity of their code. • Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not mean that we are guaranteeing the product as “unbreakable.” Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act. Information contained in this publication regarding device applications and the like is provided only for your convenience and may be superseded by updates. It is your responsibility to ensure that your application meets with your specifications. MICROCHIP MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL, STATUTORY OR OTHERWISE, RELATED TO THE INFORMATION, INCLUDING BUT NOT LIMITED TO ITS CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY OR FITNESS FOR PURPOSE. Microchip disclaims all liability arising from this information and its use. Use of Microchip devices in life support and/or safety applications is entirely at the buyer’s risk, and the buyer agrees to defend, indemnify and hold harmless Microchip from any and all damages, claims, suits, or expenses resulting from such use. No licenses are conveyed, implicitly or otherwise, under any Microchip intellectual property rights. Trademarks The Microchip name and logo, the Microchip logo, dsPIC, KEELOQ, KEELOQ logo, MPLAB, PIC, PICmicro, PICSTART, PIC32 logo, rfPIC and UNI/O are registered trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. FilterLab, Hampshire, HI-TECH C, Linear Active Thermistor, MXDEV, MXLAB, SEEVAL and The Embedded Control Solutions Company are registered trademarks of Microchip Technology Incorporated in the U.S.A. Analog-for-the-Digital Age, Application Maestro, chipKIT, chipKIT logo, CodeGuard, dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN, ECONOMONITOR, FanSense, HI-TIDE, In-Circuit Serial Programming, ICSP, Mindi, MiWi, MPASM, MPLAB Certified logo, MPLIB, MPLINK, mTouch, Omniscient Code Generation, PICC, PICC-18, PICDEM, PICDEM.net, PICkit, PICtail, REAL ICE, rfLAB, Select Mode, Total Endurance, TSHARC, UniWinDriver, WiperLock and ZENA are trademarks of Microchip Technology Incorporated in the U.S.A. and other countries. SQTP is a service mark of Microchip Technology Incorporated in the U.S.A. All other trademarks mentioned herein are property of their respective companies. © 2011-2012, Microchip Technology Incorporated, Printed in the U.S.A., All Rights Reserved. Printed on recycled paper. ISBN: 9781620761021 QUALITY MANAGEMENT SYSTEM CERTIFIED BY DNV == ISO/TS 16949 == 2011-2012 Microchip Technology Inc. Microchip received ISO/TS-16949:2009 certification for its worldwide headquarters, design and wafer fabrication facilities in Chandler and Tempe, Arizona; Gresham, Oregon and design centers in California and India. The Company’s quality system processes and procedures are for its PIC® MCUs and dsPIC® DSCs, KEELOQ® code hopping devices, Serial EEPROMs, microperipherals, nonvolatile memory and analog products. In addition, Microchip’s quality system for the design and manufacture of development systems is ISO 9001:2000 certified. Advance Information DS41610B-page 5 Worldwide Sales and Service AMERICAS ASIA/PACIFIC ASIA/PACIFIC EUROPE Corporate Office 2355 West Chandler Blvd. Chandler, AZ 85224-6199 Tel: 480-792-7200 Fax: 480-792-7277 Technical Support: http://www.microchip.com/ support Web Address: www.microchip.com Asia Pacific Office Suites 3707-14, 37th Floor Tower 6, The Gateway Harbour City, Kowloon Hong Kong Tel: 852-2401-1200 Fax: 852-2401-3431 India - Bangalore Tel: 91-80-3090-4444 Fax: 91-80-3090-4123 India - New Delhi Tel: 91-11-4160-8631 Fax: 91-11-4160-8632 Austria - Wels Tel: 43-7242-2244-39 Fax: 43-7242-2244-393 Denmark - Copenhagen Tel: 45-4450-2828 Fax: 45-4485-2829 India - Pune Tel: 91-20-2566-1512 Fax: 91-20-2566-1513 France - Paris Tel: 33-1-69-53-63-20 Fax: 33-1-69-30-90-79 Japan - Osaka Tel: 81-66-152-7160 Fax: 81-66-152-9310 Germany - Munich Tel: 49-89-627-144-0 Fax: 49-89-627-144-44 Atlanta Duluth, GA Tel: 678-957-9614 Fax: 678-957-1455 Boston Westborough, MA Tel: 774-760-0087 Fax: 774-760-0088 Chicago Itasca, IL Tel: 630-285-0071 Fax: 630-285-0075 Cleveland Independence, OH Tel: 216-447-0464 Fax: 216-447-0643 Dallas Addison, TX Tel: 972-818-7423 Fax: 972-818-2924 Detroit Farmington Hills, MI Tel: 248-538-2250 Fax: 248-538-2260 Indianapolis Noblesville, IN Tel: 317-773-8323 Fax: 317-773-5453 Los Angeles Mission Viejo, CA Tel: 949-462-9523 Fax: 949-462-9608 Santa Clara Santa Clara, CA Tel: 408-961-6444 Fax: 408-961-6445 Toronto Mississauga, Ontario, Canada Tel: 905-673-0699 Fax: 905-673-6509 Australia - Sydney Tel: 61-2-9868-6733 Fax: 61-2-9868-6755 China - Beijing Tel: 86-10-8569-7000 Fax: 86-10-8528-2104 China - Chengdu Tel: 86-28-8665-5511 Fax: 86-28-8665-7889 China - Chongqing Tel: 86-23-8980-9588 Fax: 86-23-8980-9500 Netherlands - Drunen Tel: 31-416-690399 Fax: 31-416-690340 Korea - Daegu Tel: 82-53-744-4301 Fax: 82-53-744-4302 Spain - Madrid Tel: 34-91-708-08-90 Fax: 34-91-708-08-91 China - Hangzhou Tel: 86-571-2819-3187 Fax: 86-571-2819-3189 Korea - Seoul Tel: 82-2-554-7200 Fax: 82-2-558-5932 or 82-2-558-5934 China - Hong Kong SAR Tel: 852-2401-1200 Fax: 852-2401-3431 Malaysia - Kuala Lumpur Tel: 60-3-6201-9857 Fax: 60-3-6201-9859 China - Nanjing Tel: 86-25-8473-2460 Fax: 86-25-8473-2470 Malaysia - Penang Tel: 60-4-227-8870 Fax: 60-4-227-4068 China - Qingdao Tel: 86-532-8502-7355 Fax: 86-532-8502-7205 Philippines - Manila Tel: 63-2-634-9065 Fax: 63-2-634-9069 China - Shanghai Tel: 86-21-5407-5533 Fax: 86-21-5407-5066 Singapore Tel: 65-6334-8870 Fax: 65-6334-8850 China - Shenyang Tel: 86-24-2334-2829 Fax: 86-24-2334-2393 Taiwan - Hsin Chu Tel: 886-3-5778-366 Fax: 886-3-5770-955 China - Shenzhen Tel: 86-755-8203-2660 Fax: 86-755-8203-1760 Taiwan - Kaohsiung Tel: 886-7-536-4818 Fax: 886-7-330-9305 China - Wuhan Tel: 86-27-5980-5300 Fax: 86-27-5980-5118 Taiwan - Taipei Tel: 886-2-2500-6610 Fax: 886-2-2508-0102 China - Xian Tel: 86-29-8833-7252 Fax: 86-29-8833-7256 Thailand - Bangkok Tel: 66-2-694-1351 Fax: 66-2-694-1350 UK - Wokingham Tel: 44-118-921-5869 Fax: 44-118-921-5820 China - Xiamen Tel: 86-592-2388138 Fax: 86-592-2388130 China - Zhuhai Tel: 86-756-3210040 Fax: 86-756-3210049 DS41610B-page 6 Italy - Milan Tel: 39-0331-742611 Fax: 39-0331-466781 Japan - Yokohama Tel: 81-45-471- 6166 Fax: 81-45-471-6122 Advance Information 11/29/11 2011-2012 Microchip Technology Inc.