Introduction – Active components Contents Active components Introduction Introduction – Active components 2021700000 Introduction – Active components Switches – quick-finder A.6 A A.2 A.1 Introduction – Active components Introduction – Active components Active components Solutions for global industrial use Ethernet technology is an established standard in office communication and has existed for many years. Without it, effective communications between equipment such as PCs, printers, data servers, etc. would not be possible. A In recent years this technology has been expanded under the term Industrial Ethernet and implemented in automation systems. The common goal of both manufacturer and user is to make the networking of automation system components easier and more effective. To make process data and diagnostic functions device-independent when exchanged between network participants, all equipment in a plant should be linked with just one bus technology. Industrial applications, however, differ significantly from office applications. In addition, there are normally much higher demands placed on the communication devices in the industrial setting. These include: • Installation conditions •E nvironmental conditions • Protocols • Approvals Weidmüller’s Industrial Ethernet components meet all of these requirements as they have the properties listed below: •R eliable (redundant) power supply for uninterrupted network operation esistance to extreme temperatures •R • Immune to electromagnetically caused malfunctions • Insensitive to vibration, shock and corrosive environments •C onformity with various certification standards • Longevity These rugged devices can therefore be used world-wide in different industries and applications. Stable and versatile power supply inputs for industrial applications The redundant voltage inputs provide reliable functionality of the whole system. If a power supply fails, the redundant power source takes over the energy supply. All of Weidmüller’s Industrial Ethernet components have a wide input voltage range of at least 12 to 48 V DC (Basic Line switches 9.6 to 60 V DC). They can also work with large fluctuations in voltage. For instance, with a rated 48 V DC input, a fluctuation of +20 % is acceptable and yet, in one of 12 V DC, a voltage drop of up to 20 % presents no problems for the attached devices. 3:5 %DFNXS SRZHUVXSSO\ 3:5 '&ZLGHLQSXWYROWDJHUDQJHRI WR9'&%DVLF/LQH LQSXWYROWDJHUDQJHRI9$&%DVLF/LQH A.2 ; 9'& SRZHUVXSSO\ 2021700000 Introduction – Active components Introduction – Active components Suitable for use in extreme temperature environments Outstanding immunity to electromagnetic interference Industrial environments often experience extreme temperature conditions. This means that devices are needed which can operate flawlessly with the vast temperature fluctuations. All of our Industrial Ethernet components undergo a burn-in test over several hours to ensure they function properly at the guaranteed temperature ranges (e.g. -40 °C to +75 °C). The robust design of Weidmüller’s Industrial Ethernet components also includes excellent electromagnetic compatibility and fully complies with the requirements and standards. A +75 °C to –40 °C Certified to industry standards Durability and reliability An extensive range of certifications confirm the reliability of Weidmüller’s Industrial Ethernet components •Many of the Weidmüller Ethernet components have relay outputs. These can be used for alarm signal notification (e.g. power failures or port problems). This means that, in emergencies, it is possible to react quickly to any failures. •UL 508 and UL 60950-1 •Class I, Division2 / ATEX Zone 2 for safe use in hazardous areas •DNV/GL approval for use in maritime settings •Weidmüller’s unmanaged switches are protected from receiving too many broadcast packets. The switches discard broadcast or multicast packets if they exceed a threshold level in a given time. They then receive further broadcast and multicast packets after a given time has past, until the threshold level is reached again. •All Weidmüller active Industrial Ethernet components are designed for a long service life and this can be seen from the high MTBF value. Weidmüller also guarantees its Industrial Ethernet components for a period of five years. 2021700000 A.3 Introduction – Active components Introduction – Active components The ideal solution, whatever your needs Our Basic, Value and Premium Line product ranges Basic Line A Value Line   A.4 Weidmüller’s Basic Line series consists of unmanaged Plug & Play switches in a rugged IP 30 rated aluminium housing. The devices are available with Fast Ethernet and Gigabit Ethernet and provide an economical solution for Industrial Ethernet networks. One model is equipped with Fast Ethernet and Power-over-Ethernet ports. All devices have been developed for applications in harsh industrial environments and have international approvals such as CE, cULus, Class I Div. 2 / Atex and DNV / GL and are thus internationally available for different applications. Weidmüller’s Value Line series consists of unmanaged and managed switches in a high quality IP 30 rated metal housing. The devices are available with Fast Ethernet and Gigabit Ethernet ports. Value Line managed switches support a variety of useful management functions, such as fast ring redundancy, VLAN, QoS, RMON, bandwidth management, port mirroring and warning by email message or relay. The ring redundancy can be set up easily using the web-based management interface, or with the DIP switches located on the top panel of the switches. •Plug & Play switches in a rugged aluminium housing (IP 30) •Compact design •Cost efficient entry-level switches •Fast Ethernet variants with 5 and 8 Ports •Versions with copper or fibre-optic interface (multimode and single-mode) •5 port Full-Gigabit Plug & Play Switch •Power-over-Ethernet switch with 6 Fast EtherNet ports, thereof 4 PoE+ ports •Approvals: cULus, Class I Div. 2 / Atex, DNV / GL •Unmanaged Plug & Play switches in a high quality metal housing (IP 30) •Price-sensitive mid-range class •Managed switches for entry into configurable network infrastructure •Unmanaged 8 port Full-Gigabit switches •Approvals: cULus, Class I Div. 2 / Atex, DNV / GL 2021700000 Introduction – Active components Introduction – Active components Premium Line A  Weidmüller’s Premium Line series completes the switch range for the high-end sector and is particularly suitable for complex network solutions with high traffic levels. The devices are available in different versions, ie. number of ports, transmission rate (Fast and Gigabit Ethernet) and the Typee of connection (copper and fibre-optic). With their advanced ring redundancy technology (recovery time ≤ 20 ms), these devices increase the reliability and availability of your industrial network. The option to use SFP transceivers offer a high degree of flexibility and the Gigabit variants also allow their use in networks with high traffic loads. •Managed Fast Ethernet variants in a high quality metal housing (IP 30) •Managed Power-over-Ethernet switch with 6 Fast Ethernet ports, thereof 4 PoE+ ports •Variants with 10 or 18 ports and Gigabit uplink ports •Full-Gigabit switch with 9 ports •Supports all standard protocols in TCP/IP-based industrial networks (e.g. EtherNet/IP, Modbus/TCP) •Built-in redundancy mechanisms (recovery time ≤ 20 ms) for increased reliability in network ring structures •Approvals: cULus, Class I Div. 2 / Atex, DNV / GL 2021700000 A.5 Introduction – Active components Switches – quick-finder 5 Ports total Ports RJ-45: 10/100Mbit 5 4 6 3 5 Ports RJ-45: 10/100/1000Mbit 1 8 4 4 4 1 2 1 4 Ports RJ-45: 10/100/1000Mbit (PoE+) 5 8 Ports RJ-45: 10/100Mbit (PoE+) 4 5 Ports M12: 10/100Mbit 1 Ports SC/ST-LWL: 100Mbit A 8 2 2 3 Ports SFP-LC: 100/1000Mbit 1 Ports SFP-LC: 1000Mbit Order No. Type Industrial Ethernet Switches 1504410000 IE-SW-IP67-5M12 1504420000 IE-SW-IP67T-5M12 1240840000 IE-SW-BL05-5TX 1240850000 IE-SW-BL05T-5TX 1241250000 IE-SW-BL05-5GT 1286850000 IE-SW-BL05T-5GT 1504320000 IE-SW-BL05-1GT-4GTPoE 1504340000 IE-SW-BL05T-1GT-4GTPoE 1504360000 IE-SW-BL05-1GS-4GTPoE 1504380000 IE-SW-BL05T-1GS-4GTPoE 1240870000 IE-SW-BL05-4TX-1SCS 1286530000 IE-SW-BL05T-4TX-1SCS 1240880000 IE-SW-BL05-4TX-1ST 1286540000 IE-SW-BL05T-4TX-1ST 1240890000 IE-SW-BL05-4TX-1SC 1286550000 IE-SW-BL05T-4TX-1SC 1241380000 IE-SW-BL06-2TX-4PoE 1286920000 IE-SW-BL06T-2TX-4PoE 1504210000 IE-SW-BL06-4PoE-2SC 1504220000 IE-SW-BL06T-4PoE-2SC 1504230000 IE-SW-BL06-4PoE-2ST 1504240000 IE-SW-BL06T-4PoE-2ST 1504250000 IE-SW-BL06-1TX-4PoE-1SC 1504260000 IE-SW-BL06T-1TX-4PoE-1SC 1504270000 IE-SW-BL06-1TX-4PoE-1ST 1504290000 IE-SW-BL06T-1TX-4PoE-1ST 1240900000 IE-SW-BL08-8TX 1286560000 IE-SW-BL08T-8TX 1240910000 IE-SW-BL08-6TX-2SC 1240920000 IE-SW-BL08T-6TX-2SC 1240930000 IE-SW-BL08-6TX-2ST 1286570000 IE-SW-BL08T-6TX-2ST 1412070000 IE-SW-BL08-7TX-1SC 1412080000 IE-SW-BL08T-7TX-1SC 1412090000 IE-SW-BL08-7TX-1ST ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● a) Of which 2 ports are designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 100/1000BaseSFP ports as required b) Designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 100/1000BaseSFP ports as required c) Of which 5 ports designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 100/1000BaseSFP ports as required d) Designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 1000BaseSFP ports as required A.6 2021700000 9 7 up to 9 a) c) 16 7 7 3 1 16 18 14 16 up to 2 14 d) up to 2 d) Unmanaged up to 8 10 6 2 1 up to 2 b) 3 2 2021700000 2 A up to 5 b) 2 ● ● ● ● Managed 8 6 Introduction – Active components Switches – quick-finder ● ● ● up to 2 d) up to 2 d) ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Temperature Fibre-optic interface Page -25 … +60 °C - B.5 -40 … +75 °C - B.5 -10 … +60 °C - B.3 -40 … +75 °C - B.3 0 … +60 °C - B.6 -40 … +75 °C - B.6 0 … +60 °C - B.22 -40 … +75 °C - B.22 0 … +60 °C SFP-Slot B.22 -40 … +75 °C SFP-Slot B.22 -10 … +60 °C SC-Singlemode B.3 -40 … +75 °C SC-Singlemode B.3 -10 … +60 °C ST-Multimode B.3 -40 … +75 °C ST-Multimode B.3 -10 … +60 °C SC-Multimode B.3 -40 … +75 °C SC-Multimode B.3 0 … +60 °C - B.21 -40 … +75 °C - B.21 B.21 0 … +60 °C SC-Multimode -40 … +75 °C SC-Multimode B.21 0 … +60 °C ST-Multimode B.21 -40 … +75 °C ST-Multimode B.21 0 … +60 °C SC-Multimode B.21 -40 … +75 °C SC-Multimode B.21 0 … +60 °C ST-Multimode B.21 -40 … +75 °C ST-Multimode B.21 -10 … +60 °C - B.3 -40 … +75 °C - B.3 -10 … +60 °C SC-Multimode B.3 -40 … +75 °C SC-Multimode B.3 -10 … +60 °C ST-Multimode B.3 -40 … +75 °C ST-Multimode B.3 -10 … +60 °C SC-Multimode B.3 -40 … +75 °C SC-Multimode B.3 -10 … +60 °C ST-Multimode B.3 A.7 Introduction – Active components Switches – quick-finder 5 Ports total Ports RJ-45: 10/100Mbit 5 4 6 3 5 Ports RJ-45: 10/100/1000Mbit 1 8 4 4 4 1 2 1 4 Ports RJ-45: 10/100/1000Mbit (PoE+) 5 8 Ports RJ-45: 10/100Mbit (PoE+) 4 5 Ports M12: 10/100Mbit 1 Ports SC/ST-LWL: 100Mbit A 8 2 2 3 Ports SFP-LC: 100/1000Mbit 1 Ports SFP-LC: 1000Mbit Order No. Type Industrial Ethernet Switches 1412100000 IE-SW-BL08T-7TX-1ST 1240950000 IE-SW-BL08-7TX-1SCS 1286580000 IE-SW-BL08T-7TX-1SCS 1412110000 IE-SW-BL08-6TX-2SCS 1412120000 IE-SW-BL08T-6TX-2SCS 1241270000 IE-SW-VL08-8GT 1286860000 IE-SW-VL08T-8GT 1241280000 IE-SW-VL08-6GT-2GS 1286870000 IE-SW-VL08T-6GT-2GS 1240980000 IE-SW-VL09T-6TX-3SC 1241000000 IE-SW-VL16-16TX 1286590000 IE-SW-VL16T-16TX 1241030000 IE-SW-VL16-14TX-2SC 1286610000 IE-SW-VL16T-14TX-2SC 1241050000 IE-SW-VL16-14TX-2ST 1286620000 IE-SW-VL16T-14TX-2ST 1504280000 IE-SW-VL05M-5TX 1504310000 IE-SW-VL05MT-5TX 1504330000 IE-SW-VL05M-3TX-2SC 1504350000 IE-SW-VL05MT-3TX-2SC 1504370000 IE-SW-VL05M-3TX-2ST 1504390000 IE-SW-VL05MT-3TX-2ST 1240940000 IE-SW-VL08MT-8TX 1240970000 IE-SW-VL08MT-5TX-3SC 1345240000 IE-SW-VL08MT-5TX-1SC-2SCS 1344770000 IE-SW-VL08MT-6TX-2SC 1240990000 IE-SW-VL08MT-6TX-2ST 1241020000 IE-SW-VL08MT-6TX-2SCS 1241390000 IE-SW-PL06M-2TX-4PoE 1286910000 IE-SW-PL06MT-2TX-4PoE 1241040000 IE-SW-PL08M-8TX 1286780000 IE-SW-PL08MT-8TX 1241070000 IE-SW-PL08M-6TX-2SC 1286790000 IE-SW-PL08MT-6TX-2SC 1241080000 IE-SW-PL08M-6TX-2ST ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● a) Of which 2 ports are designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 100/1000BaseSFP ports as required b) Designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 100/1000BaseSFP ports as required c) Of which 5 ports designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 100/1000BaseSFP ports as required d) Designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 1000BaseSFP ports as required A.8 2021700000 up to 9 a) c) 16 7 7 3 1 16 18 14 16 up to 2 14 d) up to 2 d) Unmanaged up to 8 10 6 2 1 3 up to 2 b) Introduction – Active components 9 7 2 Managed 8 6 2 A up to 5 b) 2 up to 2 d) up to 2 d) Temperature ● ● ● ● ● ● ● ● ● ● ● ● ● 2021700000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Fibre-optic interface Page -40 … +75 °C ST-Multimode B.3 -10 … +60 °C SC-Singlemode B.3 -40 … +75 °C SC-Singlemode B.3 -10 … +60 °C SC-Singlemode B.3 -40 … +75 °C SC-Singlemode B.3 - B.6 0 … +60 °C -40 … +75 °C - B.6 SFP-Slot B.6 -40 … +75 °C SFP-Slot B.6 -40 … +75 °C SC-Multimode B.4 - B.4 0 … +60 °C 0 … +60 °C -40 … +75 °C ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● - B.4 0 … +60 °C SC-Multimode B.4 -40 … +75 °C SC-Multimode B.4 0 … +60 °C ST-Multimode B.4 -40 … +75 °C ST-Multimode B.4 0 … +60 °C - B.13 -40 … +75 °C - B.13 B.13 0 … +60 °C SC-Multimode -40 … +75 °C SC-Multimode B.13 0 … +60 °C ST-Multimode B.13 -40 … +75 °C ST-Multimode B.13 -40 … +75 °C - B.14 -40 … +75 °C SC-Multimode B.14 -40 … +75 °C SC-Multimode/SC-Singelmode B.14 -40 … +75 °C SC-Multimode B.14 -40 … +75 °C ST-Multimode B.14 -40 … +75 °C SC-Singlemode B.14 0 … +60 °C - B.23 -40 … +75 °C - B.23 0 … +60 °C - B.15 -40 … +75 °C - B.15 0 … +60 °C SC-Multimode B.15 -40 … +75 °C SC-Multimode B.15 0 … +60 °C ST-Multimode B.15 A.9 Introduction – Active components Switches – quick-finder 5 Ports total Ports RJ-45: 10/100Mbit 5 4 6 3 5 Ports RJ-45: 10/100/1000Mbit 4 Ports RJ-45: 10/100/1000Mbit (PoE+) 8 4 4 4 1 2 5 8 4 5 Ports SC/ST-LWL: 100Mbit A 1 1 Ports RJ-45: 10/100Mbit (PoE+) Ports M12: 10/100Mbit 8 2 1 2 3 Ports SFP-LC: 100/1000Mbit Ports SFP-LC: 1000Mbit Order No. 1 Type Industrial Ethernet Switches 1286800000 IE-SW-PL08MT-6TX-2ST 1241090000 IE-SW-PL08M-6TX-2SCS 1286810000 IE-SW-PL08MT-6TX-2SCS 1241100000 IE-SW-PL16M-16TX 1286820000 IE-SW-PL16MT-16TX 1241120000 IE-SW-PL16M-14TX-2SC 1286830000 IE-SW-PL16MT-14TX-2SC 1241130000 IE-SW-PL16M-14TX-2ST 1286840000 IE-SW-PL16MT-14TX-2ST 1241290000 IE-SW-PL10M-3GT-7TX 1286930000 IE-SW-PL10MT-3GT-7TX 1241300000 IE-SW-PL10M-1GT-2GS-7TX 1286940000 IE-SW-PL10MT-1GT-2GS-7TX 1241320000 IE-SW-PL18M-2GC-16TX 1286970000 IE-SW-PL18MT-2GC-16TX 1241330000 IE-SW-PL18M-2GC-14TX2SC 1286990000 IE-SW-PL18MT-2GC14TX2SC 1241340000 IE-SW-PL18M-2GC14TX2ST 1287000000 IE-SW-PL18MT-2GC14TX2ST 1241350000 IE-SW-PL18M-2GC14TX2SCS 1287010000 IE-SW-PL18MT-2GC14TX2SCS 1241370000 IE-SW-PL09M-5GC-4GT 1287020000 IE-SW-PL09MT-5GC-4GT a) Of which 2 ports are designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 100/1000BaseSFP ports as required b) Designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 100/1000BaseSFP ports as required c) Of which 5 ports designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 100/1000BaseSFP ports as required d) Designed as combo-ports. Can be used as 10/100/1000BaseT(X) or 1000BaseSFP ports as required A.10 2021700000 up to 9 a) c) 16 7 7 3 1 16 18 14 16 up to 2 14 d) up to 2 d) Unmanaged up to 8 10 6 2 1 up to 2 b) 3 Introduction – Active components 9 7 2 Managed 8 6 2 A up to 5 b) 2 up to 2 d) up to 2 d) Temperature ● ● ● ● ● ● ● ● ● 2021700000 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Fibre-optic interface Page -40 … +75 °C ST-Multimode B.15 0 … +60 °C SC-Singlemode B.15 -40 … +75 °C SC-Singlemode B.15 0 … +60 °C - B.15 -40 … +75 °C - B.15 B.15 0 … +60 °C SC-Multimode -40 … +75 °C SC-Multimode B.15 0 … +60 °C ST-Multimode B.15 -40 … +75 °C ST-Multimode B.15 0 … +60 °C - B.16 -40 … +75 °C - B.16 0 … +60 °C SFP-Slot B.16 -40 … +75 °C SFP-Slot B.16 0 … +60 °C SFP-Slot B.17 -40 … +75 °C SFP-Slot B.17 0 … +60 °C SC-Multimode / SFP-Slot B.17 -40 … +75 °C SC-Multimode / SFP-Slot B.17 0 … +60 °C ST-Multimode / SFP-Slot B.17 -40 … +75 °C ST-Multimode / SFP-Slot B.17 0 … +60 °C SC-Singlemode / SFP-Slot B.17 -40 … +75 °C SC-Singlemode / SFP-Slot B.17 0 … +60 °C SFP-Slot B.18 -40 … +75 °C SFP-Slot B.18 A.11 Introduction – Active components Switches – quick-finder A A.12 2021700000