Active components Unmanaged Switches Fast Ethernet B Unmanaged Switches Switches are the basic coupling elements in Ethernet networks. They connect the Ethernet participants together. In an Ethernet network the communication basically originates from the participants. The switches connect the participants together and enable the communication. Unmanaged switches are the simplest active network component. They do not need to be configured and are therefore very flexible. They use the basic standard protocols, such as auto-negotiation, auto-crossing, and flow-control and can automatically adjust to the different transmission speeds or connector wiring. Unmanaged switches are protocol transparent. Each port on the switch creates an individual collision domain. The use of twisted-pair cabling with an RJ45 interface or fibre-optic cable based on the IEEE 802.3 specification interfaces are supported by all Weidmüller switches. B.10 1381580000 – 2013 Unmanaged Switches Fast Ethernet – Basic Line Unmanaged Fast Ethernet Switches 78.8 mm (3.1 in) 30.0 mm (1.2 in) 50.0 mm (2.0 in) 125.0 mm (4.9 in) 115.0 mm (4.5 in) 70.0 mm (2.8 in) Active components •10/100BaseT(X) (RJ45 connector), 100BaseFX (multi/singlemode, SC or ST connector) •Redundant dual 12/24/48 V DC, 18 to 30 V AC power inputs •IP 30 aluminum housing •Rugged hardware design well suited for hazardous locations (Class I Div. 2 /ATEX) and maritime environments (DNV/GL) •–40 °C to 75 °C operating temperature range (T models) IE-SW-BL05-Series B T;u\% IE-SW-BL08-Series Technical data Technology Standards Processing Type Flow Control Switch Properties MAC Table Size Packet Buffer Size Interface Fiber Ports RJ45 Ports DIP Switches LED Indicators Optical Fiber Wavelength Max. Transmit power Min. Transmit power RX Sensitivity Link Budget Typical Distance Saturation Power Requirements Input Voltage Input Current Overload Current Protection Connection Reverse Polarity Protection Physical Characteristics Housing Dimensions (W x H x D) Weight Installation Environmental Limits Operating Temperature Storage Temperature 1381580000 – 2013 IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT (X) and 100BaseFX IEEE 802.3x for Flow Control Store and Forward IEEE 802.3x flow control, back pressure flow control 1K 512 KBit 100BaseFX ports (SC/ST connector, multimode, singlemode) 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Enable/Disable broadcast storm protection Power, 10/100M (TP port), 100M (fiber port) 100BaseFX multimode 1300 nm -10 dBm -20 dBm -32 dBm 12 dB 5 km (50/125 μm multimode cable) 4 km (62.5/125 μm multimode cable) -6 dBm singlemode 1310 nm 0 dBm -5 dBm -34 dBm 29 dB 40 km (9/125 μm singlemode cable) -3 dBm 12/24/48 V DC (9.6 to 60 V DC), 18 to 30 V AC (47 to 63 Hz), redundant dual inputs IE SW BL05 5TX: 0.1 A @ 24 V IE SW BL05 1SC/1ST/1SCS: 0.11 A @ 24 V IE SW BL08 8TX: 0.13 A @ 24 V IE SW BL08 2SC/2ST/2SCS: 0.22 A @ 24 V IE SW BL08 1SC/1ST/1SCS: 0.17 A @ 24 V 1.1 A 1 removable 4-contact terminal block Present Aluminum, IP 30 protection IIE-SW-BL05-Series: 30 x 115 x 70 mm (1.18 x 4.52 x 2.76 in) IE-SW-BL08-Series: 50 x 115 x 70 mm (1.96 x 4.52 x 2.76 in) IE-SW-BL05-5TX: 175 g IE-SW-BL08-8TX: 275 g DIN-Rail mounting Standard Models: -10 to 60 °C (32 to 140 °F) Wide Temp. Models: -40 to 75 °C (-40 to 167 °F) -40 to 85 °C (-40 to 185 °F) Environmental Limits Ambient Relative Humidity Regulatory Approvals Safety Hazardous Location EMI EMC 5 to 95 % (non-condensing) UL 508 UL/cUL Class I, Division 2, Groups A, B, C and D; ATEX Zone 2, Ex nC IIC FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), level 3; EN61000-4-3 (RS), level 3; EN61000-4-4 (EFT), level 3; EN61000-4-5 (Surge), level 3; EN61000-4-6 (CS), level 3; EN61000-4-8; EN61000-4-11 Maritime DNV, GL (not for 1412110000, 1412120000, 1412070000, 1412080000, 1412090000, 1412100000) Shock IEC 60068-2-27 Freefall IEC 60068-2-32 Vibration IEC 60068-2-6 MTBF (meantime between failures) Time 425,000 hrs Database Telcordia (Bellcore), GB Warranty Warranty Period 5 years Ordering Information Port Variants 5 * RJ45 4 * RJ45, 1 * SC-Multimode 4 * RJ45, 1 * ST-Multimode 4 * RJ45, 1 * SC-Singlemode 8 * RJ45 6 * RJ45, 2 * SC-Multimode 6 * RJ45, 2 * ST-Multimode 6 * RJ45, 2 * SC-Singlemode 7 * RJ45, 1 * SC-Multimode 7 * RJ45, 1 * ST-Multimode 7 * RJ45, 1 * SC-Singlemode Accessories 19'' Rack Mounting Kit Cable fixing kit Model Type IE-SW-BL05-5TX IE-SW-BL05T-5TX IE-SW-BL05-4TX-1SC IE-SW-BL05T-4TX-1SC IE-SW-BL05-4TX-1ST IE-SW-BL05T-4TX-1ST IE-SW-BL05-4TX-1SCS IE-SW-BL05T-4TX-1SCS IE-SW-BL08-8TX IE-SW-BL08T-8TX IE-SW-BL08-6TX-2SC IE-SW-BL08T-6TX-2SC IE-SW-BL08-6TX-2ST IE-SW-BL08T-6TX-2ST IE-SW-BL08-6TX-2SCS IE-SW-BL08T-6TX-2SCS IE-SW-BL08-7TX-1SC IE-SW-BL08T-7TX-1SC IE-SW-BL08-7TX-1ST IE-SW-BL08T-7TX-1ST IE-SW-BL08-7TX-1SCS IE-SW-BL08T-7TX-1SCS Model Type RM-KIT IE-CFK-05 Operating Temperature -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C -10 to +60 °C -40 to +75 °C Order No. 1240840000 1240850000 1240890000 1286550000 1240880000 1286540000 1240870000 1286530000 1240900000 1286560000 1240910000 1240920000 1240930000 1286570000 1412110000 1412120000 1412070000 1412080000 1412090000 1412100000 1240950000 1286580000 Order No. 1241440000 1339610000 B.11 Unmanaged Switches Fast Ethernet – Value Line Active components Unmanaged Fast Ethernet Switches •Redundant dual 24 V DC power inputs •Relay output warning for power failure and port break alarm •Broadcast storm protection •Transparent transmission of VLAN tagged packets •–40 °C to 75 °C operating temperature range (T models) IE-SW-VL09-Series IE-SW-VL16-Series TX PWR1 PWR2 8 FAULT 135.0 mm (5.3 in) 135.0 mm (5.3 in) B RX 100M 100M 100M TX 7 9 RX 5 3 6 4 T;u\% 100M 1 2 10M 105.0 mm (4.1 in) 80.5 mm (3.2 in) 53.6 mm (2.1 in) Technical data Technology Standards Processing Type Flow Control Switch Properties MAC Table Size Packet Buffer Size Interface Fiber Ports RJ45 Ports DIP Switches LED Indicators Alarm Contact Optical Fiber Wavelength Max. TX Min. TX RX Sensitivity Link Budget Typical Distance Saturation Power Requirements Input Voltage Input Current Overload Current Protection Connection Reverse Polarity Protection Physical Characteristics Housing Dimensions (W x H x D) Weight B.12 IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3x for Flow Control Store and Forward IEEE 802.3x flow control, back pressure flow control 1 K (IE-SW-VL09...Series), 4 K (IE-SW-VL16...Series) 512 Kbit (IE-SW-VL09...Series), 1.25 MBit (IE-SW-VL16...Series) 100BaseFX ports (SC/ST connector) 10/100BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Port fault alarm Enable/disable broadcast storm protection PWR1, PWR2, FAULT, 10/100M (TP port), 100M (fiber port) 1 relay output with current carrying capacity of 1 A @ 24 V DC 100BaseFX multimode 1300 nm -10 dBm -20 dBm -32 dBm 12 dB 5 km (50/125 μm multimode cable) 4 km (62.5/125 μm multimode cable) -6 dBm IE-SW-VL09: 24 V DC (12 to 45 V DC), redundant dual inputs IE-SW-VL16: 12/24/48 V DC (9.6 to 60 V DC), redundant dual inputs IE-SW-VL09T-6TX-3SC: 0.31 A @ 24 V IE-SW-VL16-16TX: 0.27 A @ 24 V IE-SW-VL16 SC/ST: 0.44 A @ 24 V IE-SW-VL09/16...Series: 1.6 A 1 removable 6-pin terminal blocks Present Metal, IP 30 protection IE-SW-VL09...Series: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) IE-SW-VL16...Series: 80.5 x 135 x 105 mm (3.16 x 5.31 x 4.13 in) IE-SW-VL09: 790 g IE-SW-VL16: 1140 g Physical Characteristics Installation Environmental Limits Operating Temperature Storage Temperature Ambient Relative Humidity Regulatory Approvals Safety Hazardous Location EMI EMC DIN-Rail mounting Standard Models: 0 to 60 °C (32 to 140 °F) Wide Temp. Models: -40 to 75 °C (-40 to 167 °F) -40 to 85 °C (-40 to 185 °F) 5 to 95 % (non-condensing) IE-SW-VL09...Series: UL 508, UL 60950-1, CSA C22.2 No. 60950-1, EN60950-1 IE-SW-VL16...Series: UL 508, UL 60950-1, EN60950-1 UL/cUL Class I, Division 2, Groups A, B, C and D; ATEX Zone 2, Ex nC IIC FCC Part 15, CISPR (EN55022) class A EN61000-4-2 (ESD), level 3; EN61000-4-3 (RS), level 3; EN61000-4-4 (EFT), level 3; EN61000-4-5 (Surge), level 3; EN61000-4-6 (CS), level 3; DNV, GL IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 Maritime Shock Freefall Vibration MTBF (mean time between failures) Time IE-SW-VL09...Series: 396,000 hrs IE-SW-VL16...Series: 257,000 hrs Database MIL-HDBK-217F, GB 25 °C Warranty Warranty Period 5 years Ordering Information Port Variants 16 * RJ45 6 * RJ45, 3 * SC-Multimode 14 * RJ45, 2 * SC-Multimode 14 * RJ45, 2 * ST-Multimode Accessories 19'' Rack Mounting Kit Model Type IE-SW-VL16-16TX IE-SW-VL16T-16TX IE-SW-VL09T-6TX-3SC IE-SW-VL16-14TX-2SC IE-SW-VL16T-14TX-2SC IE-SW-VL16-14TX-2ST IE-SW-VL16T-14TX-2ST Model Type RM-KIT Operating Temperature 0 to +60 °C -40 to +75 °C -40 to +75 °C 0 to +60 °C -40 to +75 °C 0 to +60 °C -40 to +75 °C Order No. 1241000000 1286590000 1240980000 1241030000 1286610000 1241050000 1286620000 Order No. 1241440000 1381580000 – 2013 Unmanaged Switches Gigabit Ethernet – Basic/Value Line Unmanaged Gigabit Ethernet Switches IE-SW-VL08-xGT-Series Active components •Full Gigabit Ethernet on all ports •Variants with slots for Gigabit SFP transceivers •Redundant dual 12/24/48 V DC power inputs •Relay output warning for power failure and port break alarm •Broadcast storm protection •Supports jumbo frame transmission (up to 9.6 KB) IE-SW-BL05GT-Series 130.0 mm (5.1 in) 135.0 mm (5.3 in) 105.0 mm (4.1 in) 53.6 mm (2.1 in) B 105.0 mm (4.1 in) Technical data Technology Standards Processing Type Flow Control Switch Properties MAC Table Size Packet Buffer Size Jumbo frame support Interface Fiber Ports RJ45 Ports DIP Switches LED Indicators Alarm Contact Power Requirements Input Voltage Input Current Connection Reverse Polarity Protection Physical Characteristics Housing Dimensions (W x H x D) Weight Installation Environmental Limits Operating Temperature Storage Temperature Ambient Relative Humidity Regulatory Approvals Safety Hazardous Location EMI 1381580000 – 2013 IEEE 802.3 for 10BaseT IEEE 802.3u for 100BaseT(X) and 100BaseFX IEEE 802.3ab for 1000BaseT(X) IEEE 802.3z for 1000BaseX IEEE 802.3x for Flow Control Store and Forward IEEE 802.3x flow control, back pressure flow control 8K 1088 KBit (IE-SW-BL05-5GT), 1408 KBit (IE-SW-VL08-xGT) up to 9.6 KB 100/1000BaseSFP slot (only for IE-SW-VL08-6GT-2GS) 10/100/1000BaseT(X) auto negotiation speed, Full/Half duplex mode, and auto MDI/MDI-X connection Port fault alarm Enable/disable broadcast storm protection Enable/disable jumbo frame support PWR1, PWR2, FAULT, 10/100/1000M 1 relay output with current carrying capacity of 1 A @ 24 V DC 12/24/48 V DC (9.6 to 60 V DC), redundant dual inputs IE-SW-BL05-5GT: 0.20 A @ 24 V IE-SW-VL08-8GT: 0.32 A @ 24 V IE-SW-VL08-6GT-2GS: 0.34 A @ 24 V 1 removable 6-contact terminal block Present T;u\% 35.0 mm (1.4 in) Regulatory Approvals EMC EN61000-4-2 (ESD), level 3; EN61000-4-3 (RS), level 3; EN61000-4-4 (EFT), level 3; EN61000-4-5 (Surge), level 3; EN61000-4-6 (CS), level 3 DNV, GL IEC 60068-2-27 IEC 60068-2-32 IEC 60068-2-6 Maritime Shock Freefall Vibration MTBF (mean time between failures) Time 478.000 hrs (Serie IE-SW-BL05-5GT) 325.000 hrs (Serie IE-SW-VL08-XGT) Database Telcordia (Bellcore), GB (IE-SW-VL08-xGT series) Warranty Warranty Period 5 years Ordering Information Port Variants 5 * RJ45 10/100/1000BaseT(X) 8 * RJ45 10/100/1000BaseT(X) 6 * RJ45 10/100/1000BaseT(X), 2 Combo Ports (10/100/1000 BaseT(X) or 100/1000BaseSFP) Accessories 19'' Rack Mounting Kit Model Type IE-SW-BL05-5GT IE-SW-BL05T-5GT IE-SW-VL08-8GT IE-SW-VL08T-8GT IE-SW-VL08-6GT-2GS IE-SW-VL08T-6GT-2GS Model Type RM-KIT Operating Temperature 0 to 60 °C -40 to +75 °C 0 to +60 °C -40 to +75 °C 0 to +60 °C -40 to +75 °C Order No. 1241250000 1286850000 1241270000 1286860000 1241280000 1286870000 Order No. 1241440000 Metal, IP 30 protection IE-SW-BL05-5GT: 35 x 130 x 105 mm (1.37 x 5.12 x 4.13 in) IE-SW-VL08-xGT: 53.6 x 135 x 105 mm (2.11 x 5.31 x 4.13 in) IE-SW-BL05-5GT: 290 g IE-SW-VL08-8GT 630 g DIN-Rail mounting Standard Models: 0 to 60 °C (32 to 140 °F) Wide Temp. Models: -40 to 75 °C (-40 to 167 °F) (on request) -40 to 85 °C (-40 to 185 °F) 5 to 95 % (non-condensing) UL 508 UL/cUL Class I, Division 2, Groups A, B, C, and D; ATEX Zone 2, Ex nC IIC FCC Part 15, CISPR (EN55022) class A B.13