Download

Accessories – Active components
Contents
Active components
Overview of accessories
Accessories – Active components
WLAN antennas and connection cables
F.2
Mobile radio antennas and connection cables
F.6
SFP modules (Fast Ethernet/Gigabit Ethernet)
F.8
Module for creating configuration backup
F.9
Mounting kits for 19“ rack, wall, DIN rail
F.10
F
2021700000
F.1
Accessories – Active components
WLAN antennas and connection cables
WLAN antennas
IE-ANT-P-ABG-75-9-NF
IE-ANT-O-ABG-360-7-NF
Technical data
Electrical data
Frequency range (Mhz)
F
Antenna gain
9 dBi band 1/2
Beamwidth (horizontal)
Beamwidth (vertical)
General data
Radiation
Impedance
Polarisation
Connector type
Mechanical specifications
Dimensions
Weight
Wind load
Environmental Limits
Area of application
Operating temperature
Storage Temperature
IP protection class
Enclosure material
Radome colour
Radome material
Material for base plate
75° band 1 ; 55° band 2
55° band 1/2
Band 1: 2400 - 2500 (Mhz)
Band 2: 5150 - 5875 (Mhz)
Band 3: 3400 - 3700 (Mhz)
Band 4: 4900 - 5470 (Mhz)
Band 5: 5470 - 5935 (Mhz)
Band 1: 6 dBi
Band 2: 6 dBi
Band 3: 7 dBi
Band 4: 8 dBi
Band 5: 8 dBi
360°
–
Directional
50 ohm
Vertical
1 x N-type female
Omnidirectional
50 ohm
Vertical
1 x N-type female
101 x 80 x 35 mm (height x width x depth)
110 g
Frontal: 7N @ 160 km/h, side 7N @ 160 km/h
50.6 x 86 mm (height x diameter)
300 g
Frontal: 10N @ 160 km/h
indoors as well as outdoors
– 40 to 80 °C
– 40 to 80 °C
IP 67
indoors as well as outdoors
– 40 to 80 °C
– 40 to 80 °C
IP 68
RAL 7044 (grey)
PC
–
RAL 7043 (grey)
ASA_SAN
Stainless steel
Ordering data
Version
Note
F.2
802.11 a/b/g/h wireless antenna; directional
802.11 a/b/g/h wireless antenna; omnidirectional
Band 1: 2400 - 2500 (Mhz)
Band 2: 5150 - 5875 (Mhz)
Type
Operating temperature
IE-ANT-P-ABG-75-9-NF
– 40 to 80 °C
Assembly material included in scope of supply
Order No.
1367140000
Type
IE-ANT-O-ABG-360-7-NF
Operating temperature
– 40 to 80 °C
Order No.
1367130000
Assembly material included in scope of supply
2021700000
WLAN antennas
IE-ANT-O-BG-360-6-NF
Accessories – Active components
WLAN antennas and connection cables
IE-ANT-O-AH-360-5-NF
Technical data
Electrical data
Frequency range (Mhz)
Antenna gain
Beamwidth (horizontal)
Beamwidth (vertical)
General data
Radiation
Impedance
Polarisation
Connector type
Mechanical specifications
Dimensions
Weight
Wind load
Mast diameter min.
Mast diameter max.
Environmental Limits
Area of application
Operating temperature
Storage Temperature
IP protection class
Enclosure material
Radome colour
Radome material
Material for base plate
Ordering data
Version
Note
2021700000
802.11 b/g wireless antenna; omnidirectional
802.11 a/h wireless antenna; omnidirectional
2400 - 2500 (Mhz)
6 dBi
360°
30°
5150 - 5875 (Mhz)
5 dBi
360°
25°
Omnidirectional
50 ohm
Vertical
1 x N-type female
Omnidirectional
50 ohm
Vertical
1 x N-type female
250 x 22 mm (height x diameter)
300 g
Frontal: 3N @ 160 km/h, side 3N 160 km/h
25 mm
101 mm
160 x 16 mm (height x diameter)
300 g
Frontal: 7N @ 160 km/h, side 7N @ 160 km/h
38.1 mm
76.2 mm
indoors as well as outdoors
– 40 to 80 °C
– 40 to 80 °C
IP 67
indoors as well as outdoors
– 45 to 70 °C
– 45 to 70 °C
IP 67
RAL 7035 (light grey)
Fibre glass
–
RAL 9002 (grey white)
PP
–
Type
Operating temperature
IE-ANT-O-BG-360-6-NF
– 40 to 80 °C
Assembly material included in scope of supply
Order No.
1367090000
Type
IE-ANT-O-AH-360-5-NF
Operating temperature
– 45 to 70 °C
F
Order No.
1367120000
Assembly material included in scope of supply
F.3
Accessories – Active components
WLAN antennas and connection cables
Antenna cable
IE-CC-NM-RPSMAM-2M
IE-CC-NM-RPSMAM-4M
Technical data
Electrical data
Impedance
Max. operating frequency
Signal delay
Attenuation @ 2.4 Ghz
Attenuation @ 5 Ghz
Mechanical specifications
Length
Weight
Min. bending radius (continuous)
Connector type
F
Environmental Limits
Operating temperature
Installation temperature
Flammability
Halogen-free
UV resistance
Material data
Jacket
Outside diameter
Ordering data
Version
Antenna cable, 2m long, N-type (male) --> RP-SMA (male),
impedance 50 ohm
Antenna cable, 4m long, N-type (male) --> RP-SMA (male),
impedance 50 ohm
50 Ohm +/- 2
6 Ghz
4.08 ns/m
approx. 0.55 dB/m
approx. 0.87 dB/m
50 Ohm +/- 2
6 Ghz
4.08 ns/m
approx. 0.55 dB/m
approx. 0.87 dB/m
2m
6.3 kg/100 m
28 mm
Connection 1: N-type male
Connection 2: RP-SMA male
4m
6.3 kg/100 m
28 mm
Connection 1: N-type male
Connection 2: RP-SMA male
–40 to 85 °C
–20 to 60 °C
IEC 60332-1, UL 1581 § 1080 (VW-1)
IEC 60754
ISO 4892-2A
–40 to 85 °C
–20 to 60 °C
IEC 60332-1, UL 1581 § 1080 (VW-1)
IEC 60754
ISO 4892-2A
LSFH (modified polyethylene)
5.7 mm
LSFH (modified polyethylene)
5.7 mm
Type
IE-CC-NM-RPSMAM-2M
Order No.
1367110000
Type
Order No.
IE-CC-NM-RPSMAM-4M
1367100000
Note
F.4
2021700000
F
2021700000
F.5
Accessories – Active components
Accessories – Active components
Mobile radio antennas and connection cables
Mobile radio antenna
IE-ANT-3G-806-2170-2-NF
IE-ANT-3G-806-2500-4-NF
Technical data
Frequency range (Mhz)
Antenna gain
Radiation
Impedance
Polarisation
Connector type
Mechanical specifications
Dimensions
Weight
Environmental Limits
Area of application
Operating temperature
Storage Temperature
IP protection class
Enclosure material
Radome colour
Radome material
F
Ordering data
Version
Omni-directional antenna, mobile radio (GSM / UMTS), gain up to 2 dBi
Omni-directional antenna, mobile radio (GSM / UMTS), gain up to 4 dBi
Note
F.6
Band 1: 806-960 (MHz)
Band 2: 1710-2170 (MHz)
Band 1: 1 dBi
Band 2: 2dBi
Omnidirectional
50 ohm
Linear vertical
1 x N-type female
Band 1: 806-960 (MHz)
Band 2: 1710-2500 (MHz)
Band 1: 3 dBi
Band 2: 4 dBi
Omnidirectional
50 ohm
Linear vertical
1 x N-type female
200 x 22 mm (height x diameter)
430 g
48 x 36 mm (height x diameter)
180 g
for indoor and outdoor use
– 40 to 85 °C
– 40 to 85 °C
IP 54
for indoor and outdoor use
– 40 to 70 °C
– 40 to 70 °C
IP 66
black
Plastic
black
Plastic
Type
Operating temperature
IE-ANT-3G-806-2170-2-NF
– 40 to 85 °C
Order No.
1491160000
Included in delivery: 1 x antenna, 1 x mounting bracket, 2 x clamps for pole
mounting
Type
IE-ANT-3G-806-2500-4-NF
Operating temperature
– 40 to 70 °C
Order No.
1491170000
Included in delivery: 1 x antenna, 1x screw connection and mounting materials for
vandal-proof installation
2021700000
Connection cable mobile radio antenna
Accessories – Active components
Mobile radio antennas and connection cables
Antenna cable (2 m, 4 m, 6 m)
Technical data
General data
Impedance
Min. bending radius (repeated)
Min. bending radius (once)
Connector type
Environmental Limits
Operating temperature
UV resistance
Material data
Jacket
Outside diameter
Ordering data
Version
Antenna cable, 2m long, N-type (male) --> SMA (male)
Antenna cable, 4m long, N-type (male) --> SMA (male)
Antenna cable, 6m long, N-type (male) --> SMA (male)
Note
2021700000
50 Ohm
50,8 mm
12,7 mm
Connection 1: N-type (male)
Connection 2: SMA (male)
–40 to 85 °C
Yes
F
Polyethylene
4,95 mm
Type
IE-CC-NM-SMAM-2M
IE-CC-NM-SMAM-4M
IE-CC-NM-SMAM-6M
Order No.
1491180000
1491190000
1491210000
F.7
Accessories – Active components
SFP modules (Fast Ethernet/Gigabit Ethernet)
Gigabit Ethernet SFP modules
Fast Ethernet SFP modules
•Compliant with IEEE 802.3z
•Differential LVPECL inputs and outputs
•TTL signal detect indicator
•Hot pluggable LC duplex connector
•Class 1 laser product; complies with EN60825-1
•Compliant with IEEE 802.3u
•Differential PECL inputs and outputs
•TTL signal detect indicator
•Hot pluggable LC duplex connector
•Class 1 laser product; complies with EN60825-1
{;u
Technical data
Technical data
Interfaces
Ethernet Ports
Connectors
Optical Fibre
Wavelength
F
Interfaces
Ethernet Ports
Connectors
Optical Fibre
1
Duplex LC Connector or Simplex LC
SFP-SX
Gigabit Ethernet
SFP-LSX
SFP-LX
SFP-LHX
850 nm
1310 nm
1310 nm
1310 nm
Max. TX
-4 dBm
-1 dBm
-3 dBm
1 dBm
Min. TX
-9.5 dBm
- 9 dBm
-9.5 dBm
-4 dBm
RX Sensitivity
-18 dBm
-19 dBm
-20 dBm
-24 dBm
Link Budget
8.5 dB
10 dB
10.5 dB
20 dB
Typical Distance
550 m a)
2 km b)
10 km c)
40 km c)
Saturation
0 dBm
-3 dBm
-3 dBm
-3 dBm
a)
50/125 μm, 400 MHz * km or 62.5/125 μm, 500 MHz * km @ 850 nm multimode fibre optic cable
b)
62.5/125 μm, 750 MHz * km @ 1310 nm multimode fibre optic cable
c)
9/125 μm singlemode fibre optic cable
Note: The actual communication distance depends on many factors, including connector loss, cable
deployment, and the age of the cabling system. We recommend doing a link budget analysis and reserving
a 3 dB margin for such factors.
Environmental Limits
Operating temperature
Standard Models: 0 to 60 °C (32 to 140 °F)
Wide Temp. Models: -40 to 75 °C (-40 to 167 °F)
Storage Temperature
-40 to 85 °C (-40 to 185 °F)
Ambient Relative Humidity
5 to 95 % (non-condensing)
Approvals
Security
UL, TÜV
Maritime
DNV, GL
Warranty
Warranty Period
3 years
F.8
{;u
Ordering data
SFP Variants
Type
Gigabit-Ethernet, Multimode,
LC Connector, 500 m
Gigabit-Ethernet, Multimode,
LC Connector, 2 km
Gigabit-Ethernet, Singlemode,
LC Connector, 10 km
Gigabit-Ethernet, Singlemode,
LC Connector, 40 km
IE-SFP-1GSXLC
IE-SFP-1GSXLC-T
IE-SFP-1GLSXLC
IE-SFP-1GLSXLC-T
IE-SFP-1GLXLC
IE-SFP-1GLXLC-T
IE-SFP-1GLHXLC
IE-SFP-1GLHXLC-T
Operating
Temperature
0 to +60 °C
-20 to 75 °C
0 to +60 °C
-40 to 85 °C
0 to +60 °C
-40 to 85 °C
0 to +60 °C
-40 to 85 °C
Order No.
1
Duplex LC Connector
Fast Ethernet
SFP-M
SFP-S
SFP-L
Wavelength
1300 nm
1310 nm
1550 nm
Max. TX
-18 dBm
0 dBm
0 dBm
Min. TX
-8 dBm
-5 dBm
-5 dBm
RX Sensitivity
-34 dBm
-34 dBm
-34 dBm
Link Budget
26 dB
29 dB
29 dB
40 km b)
80 km b)
Typical Distance
4 km a)
Saturation
0 dBm
-3 dBm
-3 dBm
a)
50/125 μm or 62,5/125 μm, 800 MHz * km @ 1300 nm multimode fibre optic cable
b)
9/125 μm singlemode fibre optic cable
Environmental Limits
Operating temperature
-40 to 85 °C (-40 to 185 °F)
Storage Temperature
-40 to 85 °C (-40 to 185 °F)
Ambient Relative Humidity
5 to 95 % (non-condensing)
Approvals
Security
UL, TÜV
Maritime
DNV, GL
Warranty
Warranty Period
3 years
Ordering data
Port Variants
Fast Ethernet, Multimode,
LC Connector, 4 km
Fast Ethernet, Singlemode,
LC Connector, 40 km
Fast Ethernet, Singlemode,
LC Connector, 80 km
Type
Order No.
IE-SFP-1FEMLC-T
Operating
Temperature
-40 to +85 °C
IE-SFP-1FESLC-T
-40 to +85 °C
1241470000
IE-SFP-1FELLC-T
-40 to +85 °C
1241480000
1241450000
1241490000
1286700000
1241500000
1286710000
1241510000
1286720000
1241520000
1286730000
2021700000
Accessories – Active components
Module for creating configuration backup
External Backup and Restore Module for System Configuration
•Reduce system downtime by simple reconfiguration in case of replacing devices
•Plug-n-Play system backup and restoration
•Compact, rugged, reliable design
•Can be used with all Weidmüller managed switches and WLAN components
%
Technical data
Basic Operation
Connection
Configuration
Power Requirements
Input Voltage
Technical data
Housing
Dimensions (W x H x D)
Weight
Mounting possibility
Cable Length
Environmental Limits
Operating temperature
Storage Temperature
Ambient Relative Humidity
Approvals
EMI
EMC
Warranty
Warranty Period
Ordering data
Version
External Backup and Restore Module
2021700000
RS 232-Interface with RJ45-Connector
Use the WEB-Console of managed Switches
3 to 5 V DC (through the RS 232 port’s RTS signal)
PVC molding, IP 40 protection
32.5 x 97 x 12 mm (8.07 x 3.82 x 0.47 in)
50 g
M4 screw (< 4 mm)
35 cm (including connector)
F
0 to 60 °C (32 to 140 °F)
-20 to 70 °C (-4 to 158 °F)
5 to 95 % (non-condensing)
FCC Part 15, CISPR (EN55022) Class A
EN61000-4-2 (ESD), level 2; EN61000-4-3 (RS),
level 3;
EN61000-4-4 (EFT), level 3; EN61000-4-5 (Surge),
level 3;
EN61000-4-6 (CS), level 3
5 years
Type
EBR-MODULE RS232
Order No.
1241430000
F.9
Accessories – Active components
Mounting kits for 19“ rack, wall, DIN rail
Kit for 19" rack-mounting
Wall mounting kit
Technical data
Technical data
•For mounting DIN-rail based devices in 19" racks
Technical data
Dimensions (W x H x D)
Ordering data
Version
19" Rack Mounting Kit
•Mounting kit for alternative wall-mounting of DIN rail-based Industrial Ethernet components.
Usage
Industrial Ethernet Switches
481 x 177.8 x 202.4 mm
Type
RM-KIT
Order No.
1241440000
Ordering data
Version
Wall mounting kit
Product lines:
IE-SW-BL05
Type
IE-WALLMOUNT-KIT-30MM
Order No.
1504450000
F
F.10
2021700000
Wall mounting kit
DIN rail mounting kit
Technical data
Technical data
•Mounting kit for alternative wall-mounting of DIN rail-based Industrial Ethernet components.
Usage
Industrial Ethernet Switches
Industrial Ethernet Medienkonverter
Industrial Wireless Access Point
Ordering data
Version
Wall mounting kit
2021700000
Product lines:
IE-SW- BL06/BL08
IE-SW- VL05/VL08/VL09/VL16
IE-SW- PL06/PL08/PL09/PL10/PL16/PL18
Product lines:
IE-MC-VL
Product lines:
IE-WL-AP
Type
IE-WALLMOUNT-KIT-46MM
Order No.
1504440000
•Mounting kit for alternative mounting of Weidmüller serial/fibre-optic converters (Article
1344760000 and 1362950000) to the DIN rail.
Usage
Serial/fibre-optic converters
Ordering data
Version
DIN rail mounting kit
Accessories – Active components
Mounting kits for 19“ rack, wall, DIN rail
Type:
1344760000
1362950000
Type
IE-DINRAILMOUNT-KIT
F
Order No.
1504430000
F.11
F
F.12
2021700000
Accessories – Active components