SITRANS WF300 Series Catalog Specification Sheet

© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
■ Overview
■ Application
With weighing mechanics located externally, the WF300 series
solids flowmeters are unaffected by corrosive, abrasive, or hot
materials. Handling a wide range of product sizes, densities,
and fluidities including fine powders such as cement, they operate at process temperatures to 230 °C (450 °F). The flowmeters
help to improve final product, increase operating efficiency, and
realize significant cost savings.
Operating with the appropriate SITRANS WFS sensing head and
a micro-processor-based integrator package, the WF300 series
flowmeters provide a display of the flow rate, totalized flow, and
alarms. Outputs are 0/4 to 20 mA proportional to rate, and open
collector output for remote totalization.
SITRANS WF300 series are low to medium capacity flowmeters
for various product sizes, densities, and fluidities.
■ Benefits
•
•
•
•
For specialized pre-feed applications
Sensing element mounted outside process
Flowrates from 0.2 to 300 t/h (0.2 to 330 STPH)
Continuously monitoring of the material flow without interrupting the process
• Dust-tight construction: suitable for use in hazardous areas
and in washdown applications that require frequent cleaning
• Minimal maintenance or recalibration after the initial installation and material tests
Dry bulk solids enter the flow guide producing a mechanical deflection as they strike the flowmeter sensing plate before continuing through the process unhindered. The LVDT in the sensing head converts the deflection of the horizontal force into an
electrical signal. The integrator processes this signal into a display of flowrate and integrated total weight. The weighing process is immune to the effect of product build-up as only the horizontal force is measured.
SITRANS WF330 flowmeters are totally enclosed, with external
weighing mechanics, operating with corrosive, abrasive or hot
materials. SITRANS WF350 series operates with aerated gravity
conveyors, and includes integral vents and baffles for air separation. For applications with little available headroom, the
SITRANS WF340 series flowmeters provide the answer.
Siemens WT 10 · Update 04/2015
6/17
6
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
■ Characteristic curves
WF330 Series Flowguide Capacity Chart
2.56
80
1.92
1.60
1.28
0.96
40
60
2.24
40
0.64
20
0.32
0
400
0
1
10
Bulk Density t/m 3
100
300
305
0(
(12)
16
(14
)
)
150 (6)
(10)
100 (4)
25 0
Bulk Density lb/ft 3
50 (2)
120
20 0
140
(8)
160
100
Flowrate in STPH or t/h
Flowrate in STPH or t/h (use highest applicable flowrate for size selection)
Example: 25 t/h of material at 1.4 t/m 3, the selection is a 150 mm flowguide.
Dimensions are provided as examples only.
WF330 series, flowguide capacity chart
6
2.24
120
1.92
100
3x6
1.60
4x10
80
1.28
60
0.96
40
0.64
20
0.32
0
1
10
100
Bulk density t/m 3
2.56
140
5x1
2
5x1
6
6x 2
0
Bulk density lb/ft 3
WF340 Series Flowguide Capacity Chart
160
0
400
Flowrate in tons per hour
Should the material bulk density and flowrate be near a flowguide upper limit, choose the next larger flowguide.
WF340 series, flowguide capacity chart
6/18
Siemens WT 10 · Update 04/2015
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
■ Selection and ordering data
Article No.
SITRANS WF330
Low to medium capacity solids flowmeters for various product sizes, densities, and fluidities, particularly fine powders. A sensing plate, sensing head
and integrator are required to complete the system.
Order Code
7MH7102-
Further designs
7777 0
Please add "-Z" to Article No. and specify order
code(s).
Click on the Article No. for the online configuration in the PIA Life Cycle Portal.
Model
Stainless steel tag [69 x 38 mm (2.7 x 1.5 inch)],
Measuring-point number/identification
(max. 27 characters), specify in plain text.
Y15
Application Eng. reference number (max.15 characters), specify in plain text.
Y31
Base mount, 40 t/h (44 STPH) maximum design
capacity
1
Manufacturer's test certificate:
According to EN 10204-2.2
C11
Side mount, 40 t/h (44 STPH) maximum design
capacity
2
Inspection certificate type 3.1 per EN 102044)
C12
Base mount, 300 t/h (330 STPH) maximum design
capacity
3
Note: Not available with cabinet construction
option 1
Flowguide size
Instruction manuals
Article No.
• English
7ML1998-5CT02
No flowguide
A
2 inch ASME flange pattern1)
• German
7ML1998-5CT32
B
4 inch ASME flange pattern1)
7ML1998-5CT12
C
6 inch ASME flange pattern2)
D
• French
Note: The instruction manual should be ordered as
a separate item on the order.
8 inch ASME flange pattern2)
E
10 inch ASME flange pattern
12 inch ASME flange
2)
F
pattern3)
14 inch ASME flange pattern
G
3)
J
DN 50 flange pattern1)
K
DN 100 flange pattern1)
L
2)
7ML1998-5GK01
• Solids Flowmeter Application Guide, German
7ML1998-5GK31
6
This device is shipped with the Siemens Milltronics
manual DVD containing the complete instruction
manual library.
H
16 inch ASME flange pattern3)
DN 150 flange pattern
Additional instruction manuals
• Solids Flowmeter Application Guide, English
M
DN 200 flange pattern2)
N
DN 250 flange pattern2)
P
DN 300 flange pattern3)
Q
DN 350 flange pattern3)
R
DN 400 flange pattern3)
S
Flowguide construction
No flowguide
A
Mild steel, polyester painted
B
primer1)
C
Mild steel, epoxy painted with zinc primer3)
D
304 (1.4301) stainless steel1)
E
Mild steel, epoxy painted with zinc
304 (1.4301) stainless steel3)
F
316 (1.4401) stainless steel1)
G
316 (1.4401) stainless steel3)
H
Cabinet construction
Mild steel, polyester painted
1
primer1)
2
Mild steel, epoxy painted with zinc primer3)
3
304 (1.4301) stainless steel1)
4
304 (1.4301) stainless steel3)
5
316 (1.4401) stainless steel1)
6
316 (1.4401) stainless steel3)
7
Mild steel, epoxy painted with zinc
Siemens WT 10 · Update 04/2015
6/19
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
■ Selection and ordering data
Article No.
Spare parts
300 TPH, 316 (1.4401) stainless steel flowguide
40 TPH, mild steel flowguide
6 inch ASME
PBD:20388-115
2 inch ASME
PBD:20377-111
8 inch ASME
PBD:20388-215
4 inch ASME
PBD:20377-211
10 inch ASME
PBD:20388-315
6 inch ASME
PBD:20377-311
12 inch ASME
PBD:20388-415
8 inch ASME
PBD:20377-411
14 inch ASME
PBD:20388-515
10 inch ASME
PBD:20377-511
16 inch ASME
PBD:20388-615
40 TPH, mild steel-epoxy flowguide
40 TPH, mild steel flowguide
2 inch ASME
PBD:20377-112
2 inch DIN
PBD:20377-121
4 inch ASME
PBD:20377-212
4 inch DIN
PBD:20377-221
6 inch ASME
PBD:20377-312
6 inch DIN
PBD:20377-321
8 inch ASME
PBD:20377-412
8 inch DIN
PBD:20377-421
10 inch ASME
PBD:20377-512
10 inch DIN
PBD:20377-521
40 TPH, 304 (1.4301) stainless steel flowguide
6
Article No.
40 TPH, mild steel-epoxy flowguide
2 inch ASME
PBD:20377-114
2 inch DIN
PBD:20377-122
4 inch ASME
PBD:20377-214
4 inch DIN
PBD:20377-222
6 inch ASME
PBD:20377-314
6 inch DIN
PBD:20377-322
8 inch ASME
PBD:20377-414
8 inch DIN
PBD:20377-422
10 inch ASME
PBD:20377-514
10 inch DIN
PBD:20377-522
40 TPH, 316 (1.4401) stainless steel flowguide
40 TPH, 304 (1.4301) stainless steel flowguide
2 inch ASME
PBD:20377-115
2 inch DIN
PBD:20377-124
4 inch ASME
PBD:20377-215
4 inch DIN
PBD:20377-224
6 inch ASME
PBD:20377-315
6 inch DIN
PBD:20377-324
8 inch ASME
PBD:20377-415
8 inch DIN
PBD:20377-424
10 inch ASME
PBD:20377-515
10 inch DIN
PBD:20377-524
300 TPH, mild steel flowguide
40 TPH, 316 (1.4401) stainless steel flowguide
6 inch ASME
PBD:20388-111
2 inch DIN
PBD:20377-125
8 inch ASME
PBD:20388-211
4 inch DIN
PBD:20377-225
10 inch ASME
PBD:20388-311
6 inch DIN
PBD:20377-325
12 inch ASME
PBD:20388-411
8 inch DIN
PBD:20377-425
14 inch ASME
PBD:20388-511
10 inch DIN
PBD:20377-525
16 inch ASME
PBD:20388-611
300 TPH, mild steel flowguide
300 TPH, mild steel-epoxy flowguide
6 inch DIN
PBD:20388-121
6 inch ASME
PBD:20388-112
8 inch DIN
PBD:20388-221
8 inch ASME
PBD:20388-212
10 inch DIN
PBD:20388-321
10 inch ASME
PBD:20388-312
12 inch DIN
PBD:20388-421
12 inch ASME
PBD:20388-412
14 inch DIN
PBD:20388-521
14 inch ASME
PBD:20388-512
16 inch DIN
PBD:20388-621
16 inch ASME
PBD:20388-612
300 TPH, mild steel-epoxy flowguide
6 inch DIN
PBD:20388-122
6 inch ASME
PBD:20388-114
8 inch DIN
PBD:20388-222
8 inch ASME
PBD:20388-214
10 inch DIN
PBD:20388-322
10 inch ASME
PBD:20388-314
12 inch DIN
PBD:20388-422
12 inch ASME
PBD:20388-414
14 inch DIN
PBD:20388-522
14 inch ASME
PBD:20388-514
16 inch DIN
PBD:20388-622
16 inch ASME
PBD:20388-614
300 TPH, 304 (1.4301) stainless steel flowguide
6/20
Siemens WT 10 · Update 04/2015
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
■ Selection and ordering data
Article No.
300 TPH, 304 (1.4301) stainless steel flowguide
6 inch DIN
PBD:20388-124
8 inch DIN
PBD:20388-224
10 inch DIN
PBD:20388-324
12 inch DIN
PBD:20388-424
14 inch DIN
PBD:20388-524
16 inch DIN
PBD:20388-624
300 TPH, 316 (1.4401) stainless steel flowguide
6 inch DIN
PBD:20388-125
8 inch DIN
PBD:20388-225
10 inch DIN
PBD:20388-325
12 inch DIN
PBD:20388-425
14 inch DIN
PBD:20388-525
16 inch DIN
PBD:20388-625
Gasketing
40 TPH, gasket
PBD:22600493
300 TPH, gasket
PBD:22600494
1)2)3)4)
6
1)
2)
3)
4)
For versions 1 and 2 only.
For versions 1, 2 or 3.
For version 3 only.
Not available with cabinet construction options 1, 2, 3.
Siemens WT 10 · Update 04/2015
6/21
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
■ Selection and ordering data 1) 2) 3)
Article No.
SITRANS WF340
7MH7104Compact vertical flow, low to medium-capacity solid
7777 0
flowmeters for various product sizes, densities, and fluidities, particularly fine powders. A sensing plate,
sensing head and integrator are required to complete
the system.
Click on the Article No. for the online configuration in the PIA Life Cycle Portal.
Version
Further designs
Please add "-Z" to article no. and specify order
code(s).
Stainless steel tag [69 x 38 mm (2.7 x 1.5 inch)],
Measuring-point number/identification
(max 27 characters), specify in plain text.
Y15
Application Eng. reference number (max.15 characters), specify in plain text.
Y31
C11
Base mount, 40 t/h (44 STPH) max. design capacity
1
Manufacturer's test certificate:
According to EN 10204-2.2
Side mount, 40 t/h (44 STPH) max. design capacity
2
Inspection certificate type 3.1 per EN 102043)
C12
Base mount, 300 t/h (330 STPH) max. design
capacity
3
Instruction manual
Article No.
• English
7ML1998-5CU02
7ML1998-5CU32
Flowguide size
No flowguide (5 x 16 inch model)
A
3 x 6 inch (76 x 152 mm)1)
B
• German
Note: The instruction manual should be ordered as
a separate line on the order.
C
Additional instruction manuals
4 x 10 inch (102 x 254 mm)
1)
5 x 12 inch (127 x 305 mm)
1)
5 x 16 inch (127 x 406 mm)
2)
6 x 20 inch (152 x 508 mm)
2)
No flowguide (WF340-300 6 x 20 inch model)
6
Order Code
D
• Solids Flowmeter Application Guidelines, English
7ML1998-5GK01
E
• Solids Flowmeter Application Guidelines, German
7ML1998-5GK31
F
This device is shipped with the Siemens Milltronics
manual DVD containing the complete instruction
manual library.
G
Flowguide construction
No flowguide
A
Mild steel, polyester painted
B
304 (1.4301) stainless steel1)
C
304 (1.4301) stainless steel
2)
316 (1.4401) stainless steel1)
D
E
316 (1.4401) stainless steel2)
F
Mild steel, polyester painted with PTFE liner
G
Mild steel, polyester painted with abrasion resistant
liner
H
304 (1.4301) stainless steel, with PTFE liner1)
J
304 (1.4301) stainless steel, with PTFE liner2)
K
Mild steel, epoxy paint with zinc primer1)
L
Mild steel, epoxy paint with zinc primer2)
Other flowguide materials available upon request
M
Cabinet construction
Mild steel, painted
1
304 (1.4301) stainless steel1)
2
304 (1.4301) stainless steel2)
3
316 (1.4401) stainless steel1)
4
316 (1.4401) stainless steel2)
5
Mild steel, epoxy paint with zinc primer1)
6
Mild steel, epoxy paint with zinc primer2)
7
1)
2)
3)
For versions 1 and 2 only.
For version 3 only.
Not available with cabinet construction option 1.
6/22
Siemens WT 10 · Update 04/2015
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
■ Selection and ordering data
Article No.
Article No.
Spare parts
300 TPH, 304 (1.4301) stainless steel flowguide
40 TPH, mild steel flowguide
5 x 16 inch
PBD:20455-30
PBD:20458-30
3 x 6 inch
PBD:20401-100
6 x 20 inch
4 x 10 inch
PBD:20395-100
5 x 12 inch
PBD:20405-100
300 TPH, 304 (1.4301) stainless steel-PTFE
flowguide
5 x 16 inch
PBD:20455-40
3 x 6 inch
PBD:20401-200
6 x 20 inch
PBD:20458-40
4 x 10 inch
PBD:20395-200
5 x 12 inch
PBD:20405-200
40 TPH, mild steel-epoxy flowguide
40 TPH, 304 (1.4301) stainless steel flowguide
3 x 6 inch
PBD:20401-300
4 x 10 inch
PBD:20395-300
5 x 12 inch
PBD:20405-300
5 x 16 inch
PBD:20455-50
6 x 20 inch
PBD:20458-50
300 TPH, mild steel-PTFE flowguide
5 x 16 inch
PBD:20455-60
6 x 20 inch
PBD:20458-60
300 TPH, mild steel-AR flowguide
40 TPH, 316 (1.4401) stainless steel flowguide
3 x 6 inch
PBD:20401-400
4 x 10 inch
PBD:20395-400
5 x 12 inch
300 TPH, 316 (1.4401) stainless steel flowguide
PBD:20405-400
40 TPH, mild steel-PTFE flowguide
3 x 6 inch
PBD:20401-500
4 x 10 inch
PBD:20395-500
5 x 12 inch
PBD:20405-500
5 x 16 inch
PBD:20455-70
6 x 20 inch
PBD:20458-70
Gasketing
40 TPH, gasket
PBD:22600495
300 TPH, gasket
• 5 x 16 inch
PBD:45000969
• 6 x 20 inch
PBD:45000970
40 TPH, 304 (1.4301) stainless steel-PTFE flowguide
3 x 6 inch
PBD:20401-600
4 x 10 inch
PBD:20395-600
5 x 12 inch
PBD:20405-600
40 TPH, mild steel-AR flowguide
3 x 6 inch
PBD:20401-700
4 x 10 inch
PBD:20395-700
5 x 12 inch
PBD:20405-700
300 TPH, mild steel flowguide
5 x 16 inch
PBD:20455-10
6 x 20 inch
PBD:20458-10
300 TPH, mild steel-epoxy flowguide
5 x 16 inch
PBD:20455-20
6 x 20 inch
PBD:20458-20
Siemens WT 10 · Update 04/2015
6/23
6
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
■ Selection and ordering data
SITRANS WF350
Low to medium capacity flowmeters for powders
conveyed by aerated gravity conveyors. A sensing
plate, sensing head and integrator are required to
complete the system.
Article No.
7MH7106-
Further designs
77777
Please add "-Z" to article no. and specify order
code(s).
Click on the Article No. for the online configuration in the PIA Life Cycle Portal.
Version
40 t/h (44 STPH) maximum design capacity
1
300 t/h (330 STPH) maximum design capacity
2
Flowguide size
Stainless steel tag [69 x 38 mm (2.7 x 1.5 inch)],
Measuring-point number/identification
(max. 27 characters), specify in plain text.
Y15
Application Eng. reference number (max.15 characters), specify in plain text.
Y31
Manufacturer's test certificate:
According to EN 10204-2.2
C11
Inspection certificate type 3.1 per EN 10204
Not available with cabinet construction option 1
C12
8 inch (203 mm), 40 t/h (0.2 to 44 STPH) version
B
Instruction manuals
10 inch (254 mm), 300 t/h
Article No.
C
7ML1998-5CV02
12 inch (305 mm), 40 t/h (0.2 to 44 STPH) version
English
D
7ML1998-5CV32
14 inch (356 mm), 300 t/h
E
20 inch (508 mm), 300 t/h
F
German
Note: The instruction manual should be ordered as
a separate item on the order.
Additional instruction manuals
Flowguide construction
Mild steel, polyester painted
B
• Solids Flowmeter Application Guide, English
7ML1998-5GK01
304 (1.4301) stainless steel
D
• Solids Flowmeter Application Guide, German
7ML1998-5GK31
316 (1.4401) stainless steel
6
Order Code
This device is shipped with the Siemens Milltronics
manual DVD containing the complete instruction
manual library.
E
Cabinet construction
Mild steel, polyester painted
1
Spare parts
304 (1.4301) stainless steel
3
40 TPH, mild steel flowguide
316 (1.4401) stainless steel
4
8 inch
PBD:22520-1A0
12 inch
PBD:22520-2A0
Venting flange
ASME flange pattern
1
DIN flange pattern
2
40 TPH, 304 (1.4301) stainless steel flowguide
8 inch
PBD:22520-1B0
12 inch
PBD:22520-2B0
40 TPH, 316 (1.4401) stainless steel flowguide
8 inch
PBD:22520-1C0
12 inch
PBD:22520-2C0
300 TPH, mild steel flowguide
10 inch
PBD:22519-1A0
14 inch
PBD:22519-2A0
20 inch
PBD:22519-3A0
300 TPH, 304 (1.4301) stainless steel flowguide
10 inch
PBD:22519-1B0
14 inch
PBD:22519-2B0
20 inch
PBD:22519-3B0
40 TPH, 316 (1.4401) stainless steel flowguide
10 inch
PBD:22519-1C0
14 inch
PBD:22519-2C0
20 inch
PBD:22519-3C0
Gasketing
6/24
Siemens WT 10 · Update 04/2015
40 TPH, gasket
PBD:45000972
300 TPH, gasket
PBD:45005013
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
■ Dimensional drawings
Discharge
F
Infeed flange
Flowguide
Min. allowance for sensing
head installation
A
Sensing
head
G
Housing
H
Removable access door
B
Sensing head
C
J
D
E
6
Min. allowance for
sensing plate
Model
A
B
C
D
E
F
G
H
J
40 t/h
(44 STPH)
686 (27)
356 (14)
254 (10)
457 (18)
610 (24)
279 (11)
25 (1)
914 (36)
457 (18)
300 t/h
(330 STPH)
1 042 (41)
457 (18)
305 (12)
610 (24)
610 (24)
330 (13)
38 (1.5)
1 270 (50)
610 (24)
40 t/h version inlet sizes
51 (2)
102 (4)
152 (6)
203 (8)
254 (10)
300 t/h version inlet sizes
152 (6)
203 (8)
254 (10)
305 (12)
356 (14)
406 (16)
WF330 series, dimensions in mm (inch)
Siemens WT 10 · Update 04/2015
6/25
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
G
A
Discharge
Sensing head
H
Flowguide
B
Housing
Access door
Access and bolt holes to
suit sensing head
C
J
Sensing head
D
25 (1)
K
E SQ.
F
Min. allowance for
sensing plate
6
Size
A
B
C
D
E
F
G
H
J
K
40 t/h
(44 STPH)
152 (6)
686 (27)
304 (12)
254 (10)
508 (20)
457 (18)
76 (3)
203 (8)
508 (20)
254 (10)
40 t/h
(44 STPH)
254 (10)
686 (27)
304 (12)
254 (10)
508 (20)
457 (18)
102 (4)
203 (8)
508 (20)
254 (10)
40 t/h
(44 STPH)
305 (12)
686 (27)
304 (12)
254 (10)
508 (20)
457 (18)
127 (5)
203 (8)
508 (20)
254 (10)
300 t/h
(330 STPH)
406 (16)
1 041 (41)
343 (13.5)
305 (12)
610 (24)
762 (30)
127 (5)
254 (10)
610 (24)
330 (13)
300 t/h
(330 STPH)
508 (20)
1 041 (41)
343 (13.5)
356 (14)
711 (28)
762 (30)
152 (6)
254 (10)
610 (24)
381 (15)
WF340 series, dimensions in mm (inch)
6/26
Siemens WT 10 · Update 04/2015
© Siemens AG 2015
Solids Flowmeters
LVDT flowmeters
SITRANS WF300 series
A
F
G
K
J
ØH
Min. allowance for
sensing plate
installation
B
Flowguide
L
M
Housing
Removable
access door
Sensing head
N
6
C
D
E
P
Q
Min. allowance for
sensing plate
installation
R
Sensing head
Size
A
B
C
D
E
F
G
H
40 t/h (44 STPH)
203 (8)
686 (27)
305 (12)
254 (10)
711 (28)
127 (5)
203 (8)
102 (4)
40 t/h (44 STPH)
305 (12)
686 (27)
305 (12)
254 (10)
711 (28)
127 (5)
203 (8)
102 (4)
300 t/h (330 STPH)
254 (10)
1 041 (41)
406 (16)
356 (14)
889 (35)
191 (7.5)
229 (9)
152 (6)
300 t/h (330 STPH)
356 (14)
1 041 (41)
406 (16)
356 (14)
889 (35)
191 (7.5)
229 (9)
152 (6)
300 t/h (330 STPH)
508 (20)
1 041 (41)
406 (16)
356 (14)
889 (35)
191 (7.5)
229 (9)
152 (6)
Size
J
K
L
M
N
P
Q
R
40 t/h (44 STPH)
229 (9)
203 (8)
76 (3)
914 (36)
305 (12)
229 (9)
229 (9)
330 (13)
40 t/h (44 STPH)
229 (9)
203 (8)
102 (4)
914 (36)
305 (12)
229 (9)
229 (9)
330 (13)
300 t/h (330 STPH)
254 (10)
305 (12)
127 (5)
1 168 (46)
419 (16.5)
330 (13)
356 (14)
406 (16)
300 t/h (330 STPH)
254 (10)
305 (12)
152 (6)
1 168 (46)
419 (16.5)
330 (13)
356 (14)
406 (16)
300 t/h (330 STPH)
254 (10)
305 (12)
178 (7)
1 168 (46)
419 (16.5)
330 (13)
356 (14)
406 (16)
WF350 series, dimensions in mm (inch)
Siemens WT 10 · Update 04/2015
6/27