Download

Byte Precabling Solution
Contents
Byte Precabling Solution
Byte Precabling Solution
Byte Precabling System
C.2
Selection Guide
C.4
PLC Front Adapter for SIEMENS S7
C.7
PLC Input/Output Module Passive
C.10
PLC Input/Output Module Active
C.16
Adapter and Solution for MICROSERIES Relays and Optocouplers
C.21
Relays – MICROSERIES
C.24
Optos – MICROSERIES
C.27
Universal Cables
C.31
Accessories
C.34
C.1
C
Byte Precabling Solution
Byte Precabling System
C
Byte precabling system
This system allows the user to design a byte wiring system for
digital inputs as well as outputs.
It is possible to connect the inputs and outputs either directly by
using an 8-channel wiring interface or interface them with relays
and optocouplers.
In this case, individual modules from the MICROseries family are
used which are directly assembled in groups of 8 and connected
by cable to the PLC using an adapter fitted with a 10-pole
HE10 female connector.
You can thus use different power supplies on each of the
8 channels.
• Screw or tension clamp connection
• Very compact modules
• Clear and accurate labelling
Cable for Siemens S7-300 PLC
with front adapter
PLC connector
Wiring interface module for
direct connection to the PLC
Cable for Télémécanique Micro and
Premium PLCs
Block of eight MICROseries modules
for interfacing through relay or optocoupler
Digital MICROinterface adapter
C.2
Byte Precabling Solution
Byte Precabling System
PLC system interface
Wiring and circuitry is becoming increasingly complicated as a
result of the growing complexity of machines and systems in
process, automation and building services control systems.
Conventional connections (point-to-point wiring) between PLC
controllers and peripheral devices result in high installation and
commissioning cost. The Weidmuller range of PLC system
interface products provides the user with a quickly and easily
installed output level for SIEMENS SIMATIC® S7.
The specific front adapters replace the usual screw terminal
technology used on the PLC input/output cards. 40- or 10-pole
connectors transfer the PLC signals to the active or passive
components via pre-assembled control leads.
The PLC signals are converted either
• in double word mode to a 40-pole ribbon cable connector,
or
• in byte mode to 4 ribbon cable connectors each with 10 poles.
PLC I/O cards usually have two connection systems:
• screw clamp
• crimp connectors
In both cases, the signals have to be wired individually with the
corresponding connection elements.
Disadvantages of individual wiring:
• High assembly cost
• The risk of wiring mistakes increases with the number of
individual wires at one point
• Requires considerable space in the switchboard
• High installation workload
• Time-consuming routing and assembly of connecting leads
• High labelling and documentation workload
System advantages
•
–
–
–
–
Fast
Reduced planning and design time
Time-saving installation
Less time required for commissioning and troubleshooting
Minimized wiring effort on site thanks to plug-type connectors
• Safe
– Rules out the risk of wiring mistakes
– Clear organization in the switchboard (system cable instead
of individual wires)
– Marking corresponds with PLC
– Additional individual marking
•
–
–
–
–
Variable
Multitude of about 40 different I/O components
Variable cable lengths
Modular design of all components
1 x 4 byte and 4 x 1 byte system designs without signal
routing module
– Functions mixed by byte to an input or output level
– Expansion possible without difficulty
– Flexibility due to simple swapping of input/output interfaces
•
–
–
–
Small
Saves space in cable ducts
Small module widths
No terminal levels
Use of PLC front adapters
C.3
C
Byte Precabling Solution
Selection Guide
PLC Siemens - S7-300
PLC
Connection
Cables
Interfaces
Option 2: adapter + relay or optocoupler as desired
Option 1
I/O cards
Standard
Direct inputs or outputs
Manufacturer order numbers
6ES7 321-1BH01-0AA0
Digital input
6ES7 321-1BH81-0AA0
C
6ES7 321-1BL00-0AA0
6ES7 321-1BL80-0AA0
6ES7 321-1BH50-0AA0
Digital output
6ES7 321-7RD00-0AB0
6ES7 322-1BH01-0AA0
6ES7 322-1BH81-0AA0
6ES7 322-1BL00-0AA0
Order No.
7789235xxx
7789235xxx
843331xxxx
843331xxxx
7789235xxx
7789235xxx
7789235xxx
7789235xxx
843331xxxx
Qty Screw Tension c.
Order No.
V
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
1
1
1
1
1
1
1
1
1
Z
V
Z
V
Z
V
Z
V
Z
V
Z
V
Z
V
Z
V
Z
Qty
2
2
4
4
2
2
2
2
4
Inputs or outputs
with relay
Adapter
Page
Order No.
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
8773510000
8773530000
8773510000
8773530000
8773510000
8773530000
8773510000
8773530000
8773510000
8773530000
8773510000
8773530000
8773600000
8773620000
8773600000
8773620000
8773600000
8773620000
Qty
Page
2
C.23
2
C.23
4
C.23
4
C.23
2
C.23
2
C.23
2
C.23
2
C.23
4
C.23
Order No.
8556060000
8556080000
8556060000
8556080000
8556060000
8556080000
8556060000
8556080000
8556060000
8556080000
8556060000
8556080000
8533640000*
8533660000*
8533640000*
8533660000*
8533640000*
8533660000*
Qty
Page
16
C.25
16
C.25
32
C.25
32
C.25
16
C.25
16
C.25
16
C.25
16
C.25
32
C.25
Inputs or outputs
with optocoupler
Order No.
Qty
Page
16
C.27
16
C.27
32
C.27
32
C.27
16
C.27
16
C.27
16
C.29
16
C.29
32
C.29
8607340000
8607360000
8607340000
8607360000
8607340000
8607360000
8607340000
8607360000
8607340000
8607360000
8607340000
8607360000
8607350000
8607370000
8607350000
8607370000
8607350000
8607370000
* Note: It is possible to replace these standard relay modules with the “ACT” version which provides a non-wired common.
• MRS 24Vdc ACT 8660920000 (screw connection) instead of 8533640000
• MRZ 24Vdc ACT 8660910000 (tension clamp connection) instead of 8533660000
PLC connector
Block of 8
MICROseries modules
C.4
Cable 843331xxxx
Cable 7789235xxx
PLC Siemens - S7-400
PLC
Connection
Cables
Interfaces
Option 2: adapter + relay or optocoupler as desired
Option 1
I/O cards
E
Manufacturer order numbers
6ES7 421-1BL00-0AA0
Order No.
833591xxxx
833591xxxx
Direct inputs or
outputs
Qty Screw Tension c.
Order No.
V
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
1
1
S
6ES7 422-1BL00-0AA0
Standard
6ES7 422-7BL00-0AB0
833591xxxx
1
Z
V
Z
V
Z
Qty
4
4
4
Inputs or outputs
with relay
Adapter
Page
Order No.
C.12
C.11
C.12
C.11
C.12
C.11
8773510000
8773530000
8773600000
8773620000
8773600000
8773620000
Qty
4
4
4
Page
Order No.
8556060000
C.23
8556080000
8533640000*
C.23
8533660000*
8533640000*
C.23
8533660000*
Qty
Page
32
C.25
32
C.25
32
C.25
Inputs or outputs
with optocoupler
Order No.
8607340000
8607360000
8607350000
8607370000
8607350000
8607370000
Qty
Page
32
C.27
32
C.29
32
C.29
* Note: It is possible to replace these standard relay modules with the “ACT” version which provides a non-wired common.
• MRS 24Vdc ACT 8660920000 (screw connection) instead of 8533640000
• MRZ 24Vdc ACT 8660910000 (tension clamp connection) instead of 8533660000
Block of 8
MICROseries modules
Byte Precabling Solution
Selection Guide
C
Cable 833591xxxx
C.5
Byte Precabling Solution
Selection Guide
PLC Télémécanique - Premium/Micro
PLC
Connection
Interfaces
Option 2: adapter + relay or optocoupler as desired
Option 1
I/O cards
Digital output
Digital input
Digital I/O
Manufacturer order numbers
C
Cables
Standard
Order No.
Direct inputs or
outputs
Qty Screw Tension c. Type
V
TSX DMZ 64DTK
7789303xxx
4
Z
V
Z
TSX DEY 16FK
7789303xxx
1
TSX DEY 32D2K
7789303xxx
2
TSX DEY 64D2K
7789303xxx
4
TSX DSY 32T2K
7789303xxx
2
TSX DSY 64T2K
7789303xxx
4
V
Z
V
Z
V
Z
V
Z
V
Z
Order No.
8248050000
Input
8428870000
8248050000
Output
8428870000
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
8248050000
8428870000
Qty
4
4
2
4
8
4
8
Inputs or outputs
with relay
Adapter
Page
Order No.
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
C.12
C.11
8773510000
8773530000
8773600000
8773620000
8773510000
8773530000
8773510000
8773530000
8773510000
8773530000
8773600000
8773620000
8773600000
8773620000
Qty
Page
4
C.23
4
C.23
2
C.23
4
C.23
8
C.23
4
C.23
8
C.23
Order No.
8596060000
8596080000
8533640000
8533660000
8596060000
8596080000
8596060000
8596080000
8596060000
8596080000
8533640000*
8533660000*
8533640000*
8533660000*
* Note: It is possible to replace these standard relay modules with the “ACT” version which provides a non-wired common.
• MRS 24Vdc ACT 8660920000 (screw connection) instead of 8533640000
• MRZ 24Vdc ACT 8660910000 (tension clamp connection) instead of 8533660000
PLC connector
Block of 8
MICROseries modules
C.6
Cable 7789303xxx
Qty
Inputs or outputs
with optocoupler
Page
Order No.
32
C.25
32
C.25
16
C.25
32
C.25
64
C.25
32
C.25
64
C.25
8607340000
8607360000
8607350000
8607370000
8607340000
8607360000
8607340000
8607360000
8607340000
8607360000
8607350000
8607370000
8607350000
8607370000
Qty
Page
32
C.27
32
C.27
16
C.27
32
C.27
64
C.27
32
C.29
64
C.29
Byte Precabling Solution
PLC Front Adapter for SIEMENS S7
SIEMENS SIM S7/300 and SIM S7/400
Front adapters SIM S7/300 and SIM
S7/400 are contacted quickly and safely
to the input and output modules of
Siemens Simatic® S7-300 and S7-400
controllers.
Pre-assembled control leads with 10or 40-pole socket connectors to IEC
603-1/DIN 41651 connect the PLC input/output groups to the passive and active interface units of the PLC system interface.
Electrical isolation of the power supply
is accomplished by means of plug-in
cross connection on PLC adapters and
input/output modules with the following
options:
• 1 x 32 signals
• 2 x 16 signals
• 4 x 8 signals
There are two options for the power feed
to PLC I/O cards:
• Direct feed on the front adapter via
screw terminals
• Feed via passive/active components
by means of pre-assembled control
wire (max. 1A/byte)
For the 32-bit PLC components, there
is a choice of front adapters with four
10-pole < 4 x 1 byte structure or 40-pole
control lead < 1 x 4 byte structure. This
enables fast, cost-efficient installation
and allows wiring mistakes to be
minimized and commissioning times to
be reduced.
Pole configuration
Front
adapter
Pin 1
Pin 2
Pin 3
Pin 4
Pin 5
Pin 6
Pin 7
Pin 8
Pin 9
Pin 10
Pin 11
Pin 12
Pin 13
Pin 14
Pin 15
Pin 16
Pin 17
Pin 18
Pin 19
Pin 20
Pin 21
Pin 22
Pin 23
Pin 24
Pin 25
Pin 26
Pin 27
Pin 28
Pin 29
Pin 30
Pin 31
Pin 32
Pin 33
Pin 34
Pin 35
Pin 36
Pin 37
Pin 38
Pin 39
Pin 40
Pin 41
Pin 42
Pin 43
Pin 44
Pin 45
Pin 46
Pin 47
Pin 48
Pin 48
Pin 48
Pin 48
SIM S7/300…KONV
Socket
4 x 10 poles
X 1.9 B0+
X 1.1
X 1.2
X 1.3
X 1.4
X 1.5
X 1.6
X 1.7
X 1.8
X 1.10 B0X 2.9 B1+
X 2.1
X 2.2
X 2.3
SIM S7/400…KONV
1 x 40 poles
X 1.32 B0+
X 1.40
X 1.39
X 1.38
X 1.37
X 1.36
X 1.35
X 1.34
X 1.33
X 1.31 B0X 1.22 B1+
X 1.30
X 1.29
X 1.28
4 x 10 poles
1 x 40 poles
X 1.9 B0+
X 1.1
X 1.2
X 1.3
X 1.4
X 1.5
X 1.6
X 1.7
X 1.8
X 1.32 B0+
X 1.40
X 1.39
X 1.38
X 1.37
X 1.36
X 1.35
X 1.34
X 1.33
X 2.9 B1+
X 1.22 B1+
X 2.4
X 2.5
X 2.6
X 2.7
X 2.8
X 2.10 B1X 3.9 B2+
X 3.1
X 3.2
X 3.3
X 3.4
X 3.5
X 3.6
X 3.7
X 3.8
X 3.10 B2X 4.9 B3+
X 4.1
X 4.2
X 4.3
X 4.4
X 4.5
X 4.6
X 4.7
X 4.8
X 4.10 B3-
X 1.27
X 1.26
X 1.25
X 1.24
X 1.23
X 1.21 B1X 1.12 B2+
X 1.20
X 1.19
X 1.18
X 1.17
X 1.16
X 1.15
X 1.14
X 1.13
X 1.11 B2X 1.2 B3+
X 1.10
X 1.9
X 1.8
X 1.7
X 1.6
X 1.5
X 1.4
X 1.3
X 1.1 B3-
X 2.1
X 2.2
X 2.3
X 2.4
X 2.5
X 2.6
X 2.7
X 2.8
X 1.30
X 1.29
X 1.28
X 1.27
X 1.26
X 1.25
X 1.24
X 1.23
X 3.9 B2+
X 3.1
X 3.2
X 3.3
X 3.4
X 3.5
X 3.6
X 3.7
X 3.8
X 1.12 B2+
X 1.20
X 1.19
X 1.18
X 1.17
X 1.16
X 1.15
X 1.14
X 1.13
X 4.9 B3+
X 4.1
X 4.2
X 4.3
X 4.4
X 4.5
X 4.6
X 4.7
X 4.8
X 1.2 B3+
X 1.10
X 1.9
X 1.8
X 1.7
X 1.6
X 1.5
X 1.4
X 1.3
X 1.10 B0X 2.10 B1X 3.10 B2X 4.10 B3-
X 1.11 B0X 1.21 B1X 1.31 B2X 1.1 B3-
Plug-in
cross connectors
B0+/B1+
B1+/B2+
B2+/B3+
B0-/B1B1-/B2B2-/B3-
B0+/B1+
B1+/B2+
B2+/B3+
C.7
C
Byte Precabling Solution
PLC Front Adapter for SIEMENS S7
PLC front adapter for SIEMENS S7
SIEMENS S7/300 1 x 4 Byte
SIEMENS S7/300 4 x 1 Byte
• Pre-assembled control cable
Simatic S7/300 1x4 Byte
Simatic S7/300 4x1Byte
• Control cable 1x40- or 4x10 pole in 4 standard
lengths
• Separate feeding of the supply voltage via screw
connection terminals
• Outstanding cross connectability using ZQV
system
• Versatile accessories
• Inexpensive coupling of the interface modules
Front adapter for SIEMENS S7 300 E/A-modules
Digital input:
C
S7/300 6ES7 321-1BL00-0AA0, 32DI
Digital output :
S7/300 6ES7 322-1BL00-0AA0, 32DO
Digital input/output:
S7/300 6ES7 323-1BL00-0AA0, 16DI/16DO
X1
X2
X3
X4
X1
X1
X2
X3
X4
X1
Technical data
Connection data
Connection on process side g
Type of connection sembled cable with IEC603/1 plug-in connector
Design ole pre-assembled cable with 10-pole female connector
Configuration of single conductor
Connection system, supply voltage/other connections
Rated data
Number of signals
Rated voltage DC
Rated current per connection
Current-carrying capacity/ cable 10-pole/Line, 40-pole
Voltage supply/Byte discon.
Total current feed, max.
Connection data
SIEMENS front panel housing
1x40-pole pre-assembled cable with IEC603/1 plug-in connector or
1x40-pole pre-assembled cable with female connector nnector
7-core control line AWG 26/7 ctor
PCB screw connection terminals ge/other connections
Rated data
32 / 1x4 byte als
60 V AC/ 75 V DC
1 A ed current per connection
/26 A/ dT = 20 K capacity/ cable 10-pole/Line, 40-pole
yes age supply/Byte discon.
16 A l current feed, max.
Connection data
SIEMENS front panel housing
4 x 10-pole pre-assembled cable with IEC603/1 plug-in connector
4x10-pole pre-assembled cable with 10-pole female connector
7-core control line AWG 26/7 ctor
PCB screw connection terminals ge/other connections
Rated data
32 / 4x1 byte als
60 V AC/ 75 V DC
1 A ed current per connection
11.5 A/ dT = 20 K / pacity/ cable 10-pole/Line, 40-pole
yes age supply/Byte discon.
16 A l current feed, max.
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
115 x 22 x 32
115 x 22 x 32
mm2
mm
Note
Ordering data
2 m control line
2.5 m control line
3 m control line
5 m control line
Note
C.8
Type
SIM S7/300 FB40 2.0M
SIM S7/300 FB40 2.5M
SIM S7/300 FB40 3.0M
SIM S7/300 FB40 5.0M
Qty.
1
1
1
1
Order No.
8433290200
8433290250
8433290300
8433290500
Type
SIM S7/300 FB4*10 2.0M
SIM S7/300 FB4*10 2.5M
SIM S7/300 FB4*10 3.0M
SIM S7/300 FB4*10 5.0M
Qty.
1
1
1
1
Order No.
8433310200
8433310250
8433310300
8433310500
PLC front adapter for SIEMENS S7
SIEMENS S7/400 1x 4 Byte
SIEMENS S7/400 4 x 1 Byte
• Pre-assembled control cable
Simatic S7/400 1x4Byte
Simatic S7/400 4x1Byte
Byte Precabling Solution
PLC Front Adapter for SIEMENS S7
• 1x40-pole or 4x10-pole cables in 4 standard
lengths
• Separate feeding of supply voltage via screw
connection terminals
• Outstanding cross connectability using ZQV
system
• Versatile system accessories
• Inexpensive coupling of interface modules
Front adapter for SIEMENS S7 400 I/O modules
Digital input:
S7/400 6ES7 421-1BL00-0AA0, 32DI
C
Digital output:
S7/400 6ES7 422-1BL00-0AA0, 32DO
X1
X2
X3
X4
X1
X1
X2
X3
X4
X1
Technical data
Connection data
Connection on process side g
Type of connection sembled cable with IEC603/1 plug-in connector
Design ole pre-assembled cable with 10-pole female connector
Configuration of single conductor
Connection system, supply voltage/other connections
Rated data
Number of signals
Rated voltage DC
Rated current per connection
Current-carrying capacity/ cable 10-pole/Line, 40-pole
Voltage supply/Byte discon.
Total current feed, max.
Connection data
SIEMENS front panel housing
1x40-pole pre-assembled cable with IEC603/1 plug-in connector or
1x40-pole pre-assembled cable with female connector nnector
7-core control line AWG 26/7 ctor
PCB screw connection terminals ge/other connections
Rated data
32 / 1x4 byte als
60 V AC/ 75 V DC
1 A ed current per connection
/26 A/ dT = 20 K capacity/ cable 10-pole/Line, 40-pole
yes age supply/Byte discon.
16 A l current feed, max.
Connection data
SIEMENS front panel housing
4 x 10-pole pre-assembled cable with IEC603/1 plug-in connector
4x10-pole pre-assembled cable with 10-pole female connector
7-core control line AWG 26/7 ctor
PCB screw connection terminals ge/other connections
Rated data
32 / 4x1 byte als
60 V AC/ 75 V DC
1 A ed current per connection
11.5 A/ dT = 20 K / pacity/ cable 10-pole/Line, 40-pole
yes age supply/Byte discon.
16 A l current feed, max.
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
274 x 19 x 55
274 x 19 x 55
mm2
mm
Note
Ordering data
2 m control line
2.5 m control line
3 m control line
5 m control line
Type
SIM S7/400 FB40 2.0M
SIM S7/400 FB40 2.5M
SIM S7/400 FB40 3.0M
SIM S7/400 FB40 5.0M
Qty.
1
1
1
1
Order No.
8335900200
8335900250
8335900300
8335900500
Type
SIM S7/400 FB4*10 2.0M
SIM S7/400 FB4*10 2.5M
SIM S7/400 FB4*10 3.0M
SIM S7/400 FB4*10 5.0M
Qty.
1
1
1
1
Order No.
8335910200
8335910250
8335910300
8335910500
Note
C.9
Byte Precabling Solution
PLC Input / Output Module Passive
C
Passive components
The RSF40 or RS F10 passive interface units for 32 or 8
signals allow for efficient connection of peripheral initiators,
sensors and actuators to PLC input/output modules. The link
between the PLC and the interface module consists of the
controller-specific front adapter and the pre-assembled control
lead. This wiring version replaces point-to-point wiring, which is
prone to mistakes and is costly to install. The necessary
auxiliary voltage is provided at the connection units.
An optional status indicator (LED) shows the switching state
and the operating voltages.
Individual wiring
Input/output module RS 45 profile designed for
• 1:1 signal transfer of 32 or 8 signals to PLC input/output
modules,
• connection of RS F40 LPK2 and RS F10 LPK2 two-wire and
three-wire sensors/initiators to PLC input/output modules.
C.10
Features
• Choice of screw or tension clamp terminal
• RS45 modules with extremely narrow width of 45 mm
• 32x module via plug-in jumpers in sensor groups
(1 x 32, 2 x 16 or 4 x 8 signals)
• Signals grouped by byte
• Test point on the board through connection element
• Clearly organized terminal marking
• Additional labelling panel for group identification
• Clips to TS35 DIN rail (RS 45 profile) in 45 mm width and
TS 32/35 DIN rail in 87 mm width
Input/Output in single-conductor
system
RS F10 I/O8 LMZF
RS F40 I/O32 LMZF
I/O module
I/O module
Byte Precabling Solution
PLC Input/ Output Module Passive
• Compact design
• Tension clamp connection system
• Clear connection type
• Clips to TS 35
C
X1
40
39
38
37
X1
1
2
3
4
5
6
7
8
9
10
35
34
0.0
0.1
0.2
0.3
0.4
0.5
0.6
32
31
0.L+
0.L-
29
28
1.1
1.2
26
25
1.4
1.5
.3
23
22
1.7
1.L+
.5
20
19
2.0
2.1
.7
17
16
2.3
2.4
.L-
14
13
2.6
2.7
2.L+
1.L3.0
3.1
3.2
3.3
3.4
3.5
3.6
3.7
3.L+
3.L-
.0
.1
11
10
9
8
7
6
5
4
3
2
1
Technical data
Connection data
Connection on process side
Stripping length
Connection system, supply voltage/other connections
Coupling on control side, 8- way module
Coupling on control side, 32- way module
Rated data
Number of signals
Rated voltage DC
Rated current per connection
Common potential at terminal/Voltage supply/Byte discon.
Ambient temperature (operational)/Storage temperature
Surge category/Pollution severity
Terminal rail
Connection data
PCB terminal LMZF ess side
7.0 mm ing length
Tension clamp connection terminal other connections
10-pole FB-socket IEC 603-1 - way module
Coupling on control side, 32- way module
Rated data
8 / 1x1 byte nals
60 V AC/ 75 V DC
1 A ed current per connection
/ ommon potential at terminal/Voltage supply/Byte discon.
0 °C…+55 °C /-40 °C…+70 °C l)/Storage temperature
II /2 category/Pollution severity
TS 35 nal rail
Connection data
PCB terminal LMZF ess side
7.0 mm ing length
Tension clamp connection terminal other connections
Coupling on control side, 8- way module
40-pole FB-socket IEC 603-1 2- way module
Rated data
32 / 1x4 byte als
60 V AC/ 75 V DC
1 A ed current per connection
/no on potential at terminal/Voltage supply/Byte discon.
0 °C…+55 °C /-40 °C…+70 °C l)/Storage temperature
II /2 category/Pollution severity
TS 35 nal rail
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
1.5 / 0.5 / 2.5
45 x 43 x 54
1.5 / 0.5 / 2.5
45 x 125 x 54
mm2
mm
Note
Ordering data
Type
RS F10 I/O8 LMZF
Qty.
1
Order No.
8428870000
Type
RS F40 I/O32 LMZF
Qty.
1
Order No.
8428880000
Note
C.11
Byte Precabling Solution
PLC Input / Output Module Passive
Input/Output in single-conductor
system
RS F10 LPK 2H/12
RS F40 LPK 2H/42
I/O module
I/O module
• Compact design
• Screw connection system
• Clear connection type
• Clips to TS 35
C
X1
1
3
X1
1
.0
.1
2
3
4
.2
.3
5
.4
6
7
.5
.6
.7
8
9
+
-
10
X2
P
P
.
.
..
.
3 L3 L+
3.7
11
12
2 L2 L+
13
14
15
2.7
..
.
..
.
2.6
2.5
21
22
1 L1 L+
23
24
25
1.7
..
.
..
.
1.6
1.5
31
32
0 L0 L+
33
34
35
0.7
..
.
..
.
39
40
X2
0.6
0.5
0.1
0.0
P
P
Technical data
Connection data
Connection on process side
Stripping length
Connection system, supply voltage/other connections
Coupling on control side, 8- way module
Coupling on control side, 32- way module
Rated data
Number of signals
Rated voltage DC
Rated current per connection
Common potential at terminal/Voltage supply/Byte discon.
Ambient temperature (operational)/Storage temperature
Surge category/Pollution severity
Terminal rail
Connection data
PCB terminal LPK 2 H side
7.0 mm ing length
Screw connection , supply voltage/other connections
10-pole FB-socket IEC 603-1 - way module
Coupling on control side, 32- way module
Rated data
8 / 1x1 byte nals
60 V AC/ 75 V DC
1 A ed current per connection
/- mon potential at terminal/Voltage supply/Byte discon.
0 °C…+55 °C /-40 °C…+70 °C l)/Storage temperature
II /2 category/Pollution severity
TS 35 nal rail
Connection data
PCB terminal LPK 2 H side
7.0 mm ing length
Screw connection , supply voltage/other connections
Coupling on control side, 8- way module
40-pole FB-socket IEC 603-1 2- way module
Rated data
32 / 1x4 byte als
60 V AC/ 75 V DC
1 A ed current per connection
/no on potential at terminal/Voltage supply/Byte discon.
0 °C…+55 °C /-40 °C…+70 °C l)/Storage temperature
II /2 category/Pollution severity
TS 35 nal rail
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
1.5 / 0.5 / 2.5
45 x 49 x 65.5
1.5 / 0.5 / 2.5
45 x 121 x 65.5
mm2
mm
Note
Ordering data
Type
RS F10 LPK 2H/12
Note
C.12
Qty.
1
Order No.
8248050000
Type
RS F40 LPK 2H/42
Qty.
1
Order No.
8248060000
Input/Output in single-conductor
system
RS F10 I/O8 LPK2
RS F10 I/O8 LD LPK2
I/O module
I/O module
Byte Precabling Solution
PLC Input/ Output Module Passive
• Screw connection system
• Clear connection type
• Optional status indicator
• Additional labelling panel for group type
• Clips to TS 32/35
C
X1
.0
1
X1
.0
1
.1
.1
2
.
.
.
.
.
.
.7
8
+
9
-
10
2
.
.
.
.
.
.
.7
8
+
+
9
-
10
Technical data
Connection data
Connection on process side
Stripping length
Connection system, supply voltage/other connections
Coupling on control side, 8- way module
Rated data
Number of signals
Rated voltage mn;20 %
Rated current per connection
LED current mA
Ambient temperature (operational)/Storage temperature
Surge category/Pollution severity
Terminal rail
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
Connection data
PCB terminal LPK 2 H side
7.0 mm ing length
Screw connection , supply voltage/other connections
10-pole FB-socket IEC 603-1 - way module
Rated data
8 / 1x1 byte nals
60 V AC/ 75 V DC 0 %
1 A ed current per connection
&amp;lt; 5 mA
0 °C…+55 °C /-40 °C…+70 °C l)/Storage temperature
II /2 category/Pollution severity
TS 32, TS 35 l
Connection data
PCB terminal LPK 2 H side
7.0 mm ing length
Screw connection , supply voltage/other connections
10-pole FB-socket IEC 603-1 - way module
Rated data
8 / 1x1 byte nals
24 V DC ±20 %
1 A ed current per connection
< 5 mA
0 °C…+55 °C /-40 °C…+70 °C l)/Storage temperature
II /2 category/Pollution severity
TS 32, TS 35 l
1.5 / 0.5 / 2.5
87 x 40 x 80
1.5 / 0.5 / 2.5
87 x 40 x 80
Note
Ordering data
Type
RS F10 I/O8 LPK2
Qty.
1
Order No.
8224290000
Type
RS F10 I/O8 LD LPK2
Qty.
1
Order No.
8224260000
Note
C.13
Byte Precabling Solution
PLC Input / Output Module Passive
Input module in 3-conductor system
RS F10 INIT8 LD LMZF
• Tension clamp connection system
Input module
• Connection of 3-wire initiators
• Optional status indicator
• Additional labelling panel for group type
• Clips to TS 32/35
C
X1
1
.0
2
.1
3
.2
4
.3
5
.4
6
.5
7
.6
8
.7
9
L+
10
LL+
L-
L+
L-
L+
L-
L+
L-
L+
L-
L+
L-
L+
L-
Technical data
Connection data
Connection on process side
Stripping length
Connection system, supply voltage/other connections
Coupling on control side, 8- way module e
Rated data
Number of signals
Rated voltage mn;20 %
Rated current per connection
LED current mA
Common potential at terminal/Voltage supply/Byte discon.
Ambient temperature (operational)/Storage temperature
Surge category/Pollution severity
Terminal rail
Connection data
PCB terminal LMZF ess side
7.0 mm ing length
Tension clamp connection terminal /other connections
10-pole FB-socket IEC 603-1 2- way module
Rated data
8 / 1x1 byte nals
24 V DC ±20 %
1 A ed current per connection
< 5 mA
+/- potential /- at terminal/Voltage supply/Byte discon.
0 °C…+55 °C /-40 °C…+70 °C l)/Storage temperature
II /2 category/Pollution severity
TS 32, TS 35 l
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
1.5 / 0.5 / 2.5
87 x 54 x 73
mm2
mm
Note
Ordering data
Type
RS F10 INIT8 LD LMZF
Note
C.14
Qty.
1
Order No.
8428890000
Input module in 3-conductor system
RS F40 INIT32 LMZF
RS F40 INIT32 LD LMZF
• Tension clamp connection system
Input module
Input module
Byte Precabling Solution
PLC Input/ Output Module Passive
• Connection of 3-wire initiators
• Wire jumpers on the 32-way modules enable
group-type splitting of the initiators into 1x32,
2x16 or 4x8 signals
• Clear byte-by-byte grouping of signals
• Optional status indicator
• Additional labelling panel for group type
• Clips to TS 32/35
C
32
32
31
31
30
29
30
29
22
22
21
21
Technical data
Connection data
Connection on process side
Stripping length
Connection system, supply voltage/other connections
Coupling on control side, 32- way module
Rated data
Number of signals
Rated voltage mn;20 %
Rated current per connection
LED current mA
Common potential at terminal/Voltage supply/Byte discon.
Ambient temperature (operational)/Storage temperature
Surge category/Pollution severity
Terminal rail
Connection data
PCB terminal LMZF ess side
7.0 mm ing length
Tension clamp connection terminal /other connections
40-pole FB-socket IEC 603-1 2- way module
Rated data
32 / 1x4 byte als
60 V AC/ 75 V DC 0 %
1 A ed current per connection
&amp;lt; 5 mA
+/- potential /yes terminal/Voltage supply/Byte discon.
0 °C…+55 °C /-40 °C…+70 °C l)/Storage temperature
II /2 category/Pollution severity
TS 32, TS 35 l
Connection data
PCB terminal LMZF ess side
7.0 mm ing length
Tension clamp connection terminal /other connections
40-pole FB-socket IEC 603-1 2- way module
Rated data
32 / 1x4 byte als
24 V DC ±20 %
1 A ed current per connection
< 5 mA
+/- potential /yes terminal/Voltage supply/Byte discon.
0 °C…+55 °C /-40 °C…+70 °C l)/Storage temperature
II /2 category/Pollution severity
TS 32, TS 35 l
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
1.5 / 0.5 / 2.5
87 x 185 x 73
1.5 / 0.5 / 2.5
87 x 185 x 73
mm2
mm
Note
Ordering data
Type
RS F40 INIT32 LMZF
Qty.
1
Order No.
8430980000
Type
RS F40 INIT32 LD LMZF
Qty.
1
Order No.
8428900000
Note
C.15
Byte Precabling Solution
PLC Input / Output Module Active
Active components
Relay output modules allow transmission of electric signals between PLC controller and the actuator level. A signal isolator
guarantees transmission free of reference potential and
decoupling of the electric signals.
C
Relay output modules for controlling actuators free from
reference potential from a PLC.
• RS F40 16 RS for output of 16 signals
(with expansion module max. 32 signals),
• RS F40 LMZF 32 RS for output of 32 signals,
• RS F10 8RS for output of 8 signals.
The advantages of active interface components:
-
C.16
low-disturbance and noise-free signal transmission
power gain
compact design
cost- and time-saving wiring with pre-assembled lines
screw or tension spring connections as required
inexpensive adaptation via pre-assembled control lines to
the PLC
electrical isolation of input and output circuits
expansion board for upgrading a 16-way module to a 32-way
module
plug-in relay
integral switching status indicator
labelling panel for group type
can be clipped to TS 32/35
Relays
RS F40 16RS OUT
• Screw connection system
Output module
Byte Precabling Solution
PLC Input / Output Module Active
• Base and expansion modules each equipped
with 16 relays
• Plug-in relays with changeover contact
• Expansion module connected via 20-pole ribbon
cable
• Electrical isolation of input and output circuits
• LED status indicator
• For mounting on TS 32/35
C
Technical data
Connection data
Number of signals
Connection on process side
Type of connection tor IEC 603/1
Connection system, supply voltage/other connections
Stripping length
Connection data
16 / 1x2 byte als
0.1
Input
Rated voltage mn;10%
DC Response/drop-out Volt
Rated current DC
Pick-up/drop-out current, DC coil
Power rating
Status indicator LED / current consumption
Response time / Drop-out time
max. switching frequency at rated load
Output
max. switching voltage AC/max. DC
Continuous current/Making current/min. switching current
max. switching power
Type of relay/Relay mounting
Type of contact/Contact base material
Insulation coordination (EN 50178)
Ambient temperature (operational)
Storage temperature
Rated voltage
Dielectric strength, Input/Output
Surge category
Pollution severity
DIN Rail compatibility
Standards/Approvals
Screw connection cess side
40-pole pin connector IEC 603/1
Screw connection/ IEC 603-1 20-pole her connections
7.00 mm ng length
Input
24 V DC ±10%
> 16 V / < 4 V pout Volt
30 mA current DC
23 mA / 2 mA out current, DC coil
0.75 W ating
yellow /3.00 mA r/LED - current consumption
< 8 ms/ < 7 ms Drop-out time
10.0 Hz itching frequency at rated load
Output
250 V/250 V ing voltage AC/max. DC
6 A/8 A /100 mA ent/Making current/min. switching current
2000 VA / 200 W ower
RCL314024 /pluggable ounting
CO contact /AgNi 90/10 base material
Insulation coordination (EN 50178)
0 °C…+55 °C ature (operational)
-40 °C…+70 °C ure
300 V voltage
4 kVeff , Input/Output
II ge category
2 llution severity
TS 32, TS 35 atibility
EN 50178 /CE rovals
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
2.5 / 0.5 / 4
87 x 350 x 76
mm2
mm
x1
40
11
14
12
0.2
30
39
21
24
..
.
0.7
..
.
33
22
81
84
82
1.0
32
0 L1
31
0 L-
30
91
94
92
1.1
29
101
104
..
.
1.7
..
.
23
102
161
164
162
22
1 L+
21
2.0
2.1
20
19
2.7
2L+
2L3.0
3.1
13
12
11
10
9
3.7
3L+
3L-
3
2
1
1 LX2
..
.
20
.. 19
.
13
12
11
9
10
3
2
1
Note
Ordering data
Basic module
Expansion module
Type
RS F40 16RS OUT 24VDC
RS F40 16RS OUT 24VDC E
Qty.
1
1
Order No.
8224181001
8224191001
Note
Accessories
Note
Spare relay RCL314024 8693260000
C.17
Byte Precabling Solution
PLC Input/Output Module Active
Relays
RS F10 8R OUT 24VDC
• Screw connection system
Output module
• Compact design
• Electrical isolation of input and output circuits
• Relay soldered with changeover contact
• LED status indicator
• Clips to TS 35
C
Technical data
Connection data
Type 03-1 10-pole/ screw connection
Number of signals
Connection on process side
x1
Connection data
IEC603-1 10-pole/ screw connection
Type of connection tor IEC 603/1
Connection system, supply voltage/other connections
Stripping length
Input
Rated voltage mn;10%
DC Response/drop-out Volt
Rated current DC
Pick-up/drop-out current, DC coil
Power rating
Status indicator LED / current consumption
Response time / Drop-out time
Output
max. switching voltage AC/max. DC
Continuous current/Making current/min. switching current
max. switching power
Type of relay/Relay mounting
Type of contact/Contact base material
Insulation coordination (EN 50178)
Ambient temperature (operational)
Storage temperature
Rated voltage
Dielectric strength, Input/Output
Surge category
Pollution severity
DIN Rail compatibility
Standards/Approvals
8 / 1x1 byte nals
Screw connection cess side
10-pole pin connector IEC 603/1
Screw connection LM 3.5 y voltage/other connections
5.00 mm ng length
Input
24 V DC ±10%
> 18 V/ < 4 V opout Volt
20 mA current DC
20 mA/ 2mA p-out current, DC coil
0.5 W rating
yellow /5.00 mA r/LED - current consumption
< 8 ms/ < 4 ms Drop-out time
Output
250 V/120 V ing voltage AC/max. DC
3 A/5 A /100 mA ent/Making current/min. switching current
1250 VA / 80 W power
DOLD OW5691 /soldered unting
CO contact /AgNi ontact base material
Insulation coordination (EN 50178)
0 °C…+55 °C ature (operational)
-40 °C…+70 °C ure
250 V voltage
4 kVeff , Input/Output
II ge category
2 llution severity
TS 32, TS 35 atibility
EN 50178 /CE rovals
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
1.5 / 0.5 / 1.5
45 x 93 x 51
mm2
mm
Note
Ordering data
IEC603-1 10-pole/ screw connection
Note
Accessories
Note
C.18
Type
RS F10 8R OUT 24VDC
11
.0 1
Qty.
1
Order No.
8329800000
14
12
21
.1 2
24
.
.
.
.7 8
.
.
.
22
81
84
82
9
10
Relays
RS F10 8RS OUT LMZF
• Tension clamp connection system
Output module
Byte Precabling Solution
PLC Input / Output Module Active
• Compact design
• Electrical isolation of input and output circuits
• 8 plug-in relays
• NO contact design
• LED status indicator
• Additional labelling panel for group type
• Clips to TS 32/35
C
Technical data
Connection data
Type 03-1 10-pole/ tension clamp connection
Number of signals
Connection on process side
X1
Connection data
IEC603-1 10-pole/ tension clamp connection
Type of connection tor IEC 603/1
Connection system, supply voltage/other connections
Stripping length
Input
Rated voltage mn;10%
DC Response/drop-out Volt
Rated current DC
Pick-up/drop-out current, DC coil
Power rating
Status indicator LED / current consumption
Response time / Drop-out time
Output
max. switching voltage AC/max. DC
Continuous current/Making current/min. switching current
max. switching power
Type of relay/Relay mounting
Type of contact/Contact base material
Insulation coordination (EN 50178)
Ambient temperature (operational)
Storage temperature
Rated voltage
Dielectric strength, Input/Output
Surge category
Pollution severity
DIN Rail compatibility
Standards/Approvals
8 / 1x1 byte nals
PCB terminal LMZF ess side
10-pole pin connector IEC 603/1
Tension clamp connection voltage/other connections
7.00 mm ng length
Input
24 V DC ±10%
> 19 V/ < 7 V opout Volt
30 mA current DC
20 mA/ 2mA p-out current, DC coil
0.5 W rating
yellow /3.00 mA r/LED - current consumption
< 5 ms /< 15 ms Drop-out time
Output
250 V/125 V ing voltage AC/max. DC
3 A/5 A /10 mA rent/Making current/min. switching current
1250 VA / 600 W ower
FUJITSU NYP-24WK /pluggable
NO contact /AgNi 5µm Au base material
Insulation coordination (EN 50178)
0 °C…+55 °C ature (operational)
-40 °C…+70 °C ure
300 V voltage
2.5 kV ric strength, Input/Output
II ge category
2 llution severity
TS 32, TS 35 atibility
EN 50178 /CE rovals
.0 1
13
14
.1 2
23
24
.2 3
33
34
.3 4
43
.4 5
53
44
54
.5 6
63
64
.6 7
73
74
.7 8
83
84
9
L+
10
L-
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
1.5 / 0.5 / 2.5
87 x 78 x 73
Note
Ordering data
IEC603-1 10-pole/ tension clamp connection
Type
RS F10 8RS OUT LMZF
Qty.
1
Order No.
8430990000
Note
Accessories
Note
Spare relay NYP-24 WK 4052510000
C.19
Byte Precabling Solution
PLC Input/Output Module Active
Relays
RS F40 32RS OUT LMZF
• Tension clamp connection system
Output module
• Compact design
• Electrical isolation of input and output circuits
• 32 plug-in relays
• NO contact design
• LED status indicator
• Additional labelling panel for group type
• Clips to TS 32/35
C
Technical data
Connection data
Type 03-1 40-pole/ tension clamp connection
Number of signals
Connection on process side
Type of connection tor IEC 603/1
Connection system, supply voltage/other connections
Stripping length
Input
Rated voltage mn;10%
DC Response/drop-out Volt
Rated current DC
Pick-up/drop-out current, DC coil
Power rating
Status indicator LED / current consumption
Response time / Drop-out time
Output
max. switching voltage AC/max. DC
Continuous current/Making current/min. switching current
max. switching power
Type of relay/Relay mounting
Type of contact/Contact base material
Insulation coordination (EN 50178)
Ambient temperature (operational)
Storage temperature
Rated voltage
Dielectric strength, Input/Output
Surge category
Pollution severity
DIN Rail compatibility
Standards/Approvals
LMZF
40-pol.
Connection data
IEC603-1 40-pole/ tension clamp connection
13
0.0
32 / 1x4 byte als
PCB terminal LMZF ess side
40-pole pin connector IEC 603/1
Tension clamp connection voltage/other connections
7.00 mm ng length
Input
24 V DC ±10%
> 19 V/ < 7 V opout Volt
30 mA current DC
20 mA/ 2mA p-out current, DC coil
0.5 W rating
yellow /3.00 mA r/LED - current consumption
< 5 ms /< 15 ms Drop-out time
Output
250 V/125 V ing voltage AC/max. DC
3 A/5 A /10 mA rent/Making current/min. switching current
1250 VA / 600 W ower
FUJITSU NYP-24WK /pluggable
NO contact /AgNi 5µm Au base material
Insulation coordination (EN 50178)
0 °C…+55 °C ature (operational)
-40 °C…+70 °C ure
300 V voltage
2.5 kV ric strength, Input/Output
II ge category
2 llution severity
TS 32, TS 35 atibility
EN 50178 /CE rovals
14
23
0.1
24
83
0.7
84
LMZF 2
253
3.0
254
263
3.1
264
323
3.7
324
LMZF 2
JUMPER
JUMPER
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
1.5 / 0.5 / 2.5
87 x 263 x 73
JUMPER
Note
Ordering data
IEC603-1 40-pole/ tension clamp connection
Type
RS F40 32RS OUT LMZF
Note
Accessories
Note
C.20
Spare relay NYP-24 WK 4052510000
Qty.
1
Order No.
8431000000
Byte Precabling Solution
Adapter and Solution for MICROSERIES Relays and Optocouplers
MICROinterface Digital
Link field and control with a system instead of masses of wires.
Features
MICROinterface Digital is the answer to connecting eight
MICROSERIES couplers to a PLC I/O module via pre-assembled
lines. It results in simple, error-free connections between field
and control.
• No tools required for installation
• Compatible with MICROSERIES screw and tension clamp
connections
• Electrical isolation and signal adaptation with relays or optos
as required
First, set up a block of eight couplers using Weidmuller’s
well-known relays or optos from the MICROSERIES range
(available with screw or tension clamp connections). Plug the
interface module into the corresponding cross-connection
openings using a ribbon cable or SUB-D connection. Using
the pre-assembled cables available in various lengths, simply
connect to the main PLC.
MICROinterface module for ribbon cable connection
MICROinterface module for SUB-D connection
C.21
C
Byte Precabling Solution
Adapter and Solution for MICROSERIES Relays and Optocouplers
Instructions for assembling the adapter
C
Assemble a block of 8 MICROseries on
the rail and adjust the stops
Insert the adapter in the transverse
connection channel and ensure it is
correctly positioned
Connect the prefabricated cable fitted with
an HE10 or D-SUB connector
To remove the cable, move the two retaining
clips apart
C.22
Push down on the center of the adapter
from above
MICROinterface digital
MI8DI-S/Z
MI8DO-S/Z
Input module
Output module
Byte Precabling Solution
Adapter and Solution for MICROSERIES Relays and Optocouplers
1.....................8
1.....................8
11
A2
14
A1
C
1
2
3
4
5
6
7 9
8 10
1
2
3
4
5
6
7 9
8 10
Technical data
Connection data
Type ut module
Type of terminal / Connection system onnection;Available for
ribbon cable or Sub-D connection
Connection data
Input module e
MICROSERIES;Screw or tension clamp connection;Available
for ribbon cable or Sub-D connection
Connection data
Output module
MICROSERIES;Screw or tension clamp connection;Available
for ribbon cable or Sub-D connection
Rated data
Operating voltage, max.
Current-carrying capacity
Total current feed, max.
Impulse withstand voltage (1.2/50 µs)
Rated insulation voltage
Storage temperature
Ambient temperature (operational)
Insulation coordination (EN 50 178)
Surge category
Pollution severity
Clearances/Creepage distances to EN
Rated data
30 V AC/DC voltage, max.
0.5 A per channel capacity
2 A al current feed, max.
330 V se withstand voltage (1.2/50 µs)
32 V d insulation voltage
-20 °C…+85 °C ture
0 °C…+55 °C rature (operational)
Insulation coordination (EN 50 178)
I urge category
2 ollution severity
0.1 mm nces/Creepage distances to EN
Rated data
30 V AC/DC voltage, max.
0.5 A per channel capacity
2 A al current feed, max.
330 V se withstand voltage (1.2/50 µs)
32 V d insulation voltage
-20 °C…+85 °C ture
0 °C…+55 °C rature (operational)
Insulation coordination (EN 50 178)
I urge category
2 ollution severity
0.1 mm nces/Creepage distances to EN
2.5 / 0.5 / 2.5
48 x 59 x 53
2.5 / 0.5 / 2.5
48 x 59 x 53
Wiring diagram for ribbon cable
Wiring diagram for SUB-D
Clamping range (rating- / min. / max.)
Length x width x height
mm2
mm
Note
Ordering data
Connection system, pre-assembled cable
Ribbon cable connector, 10-pole
SUB-D plug, 15-pole
Ribbon cable connector, 10-pole
SUB-D plug, 15-pole
Note
Type
MI8DI-S F10 S
MI8DI-S SUB D15S
MI8DI-Z F10 S
MI8DI-Z SUB D15S
Qty
1
1
1
1
Order No.
8773510000
8773460000
8773530000
8773490000
MI8DI-S = Screw connection
MI8DI-Z = Tension clamp connection
Type
MI8DO-S F10 S
MI8DO-S SUB D15S
MI8DO-Z F10 S
MI8DO-Z SUB D15S
Qty
1
1
1
1
Order No.
8773600000
8773550000
8773620000
8773570000
MI8DI-S = Screw connection
MI8DI-Z = Tension clamp connection
Accessories
Note
10-pole ribbon cable (see pg. C.33 for additional options)
15-pole female D-Sub cable (see pg. C.31)
8235360000
7789250xxx
10-pole ribbon cable (see pg. C.33 for additional options)
15-pole female D-Sub cable (see pg. C.31)
8235360000
7789250xxx
C.23
Byte Precabling Solution
Relays – MICROSERIES
1 change-over contact
AC/DC/UC coil
Modulee can be used as an universal interface between the
controller and the actuator to switch small and mediumsized loads.
• Relay module interchangeable, also for an opto module
• 6.1 mm wide
• Pluggable cross-connection at input and output minimizes
the wiring workload.
C
11
14
A2
(5/12 V DC)
12
A1
11
14
(24/60 V DC)
A2
12
A1
11
(24/48/120 V UC) 14
A2
12
A1
11
(230 V AC)
14
A2
A1
12
Output
max. switching voltage AC1/Continuous current
min. switching power
Response time / Drop-out time
Contact base material
Mechanical endurance
max. switching frequency at rated load
Rated data
Status indicator/Free wheel diode
Reverse pol. prot
250 V/6 A
12 V / 100 mA
6.2ms/3.9ms
AgSnO
20*106 switching cycles
0.1 Hz
green LED/Yes
available
Ambient temperature (operational)
Storage temperature
Humidity
Approvals
Insulation coordination (EN 50178)
Standards
Rated voltage
Impulse withstand voltage
Clearance and creepage distances for control/load side
Surge category
Pollution severity
Protective separation to VDE 0106 part 101
-25 °C…+50 °C
-40 °C…+60 °C
40°C/93% RH, no condensation
CE; cULus;
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
Screw connection
2.5 / 0.5 / 4
93 / 6.1 / 92
Note
mm2
mm
EN 50178
300 V
4 kV
≥ 5.5 mm
III
2
Yes
Tension clamp connection
1.5 / 0.5 / 2.5
94 / 6.1 / 91
Cross-connectors and markers - refer to MICROSERIES accessories
Applications
Limit curve
400
300
Switching cycles
AC Ohmic load
200
Voltage [V]
100
DC Ohmic load
0
0.1
1
5
Current [A]
Current [A]
Ambient temperature [C]
C.24
Switching
Switching cycles
cycles
Output current [A]
Current–Temperature rise curve
acc. to
Current [A]
Byte Precabling Solution
Relays – MICROSERIES
1 change-over contact
AC/DC/UC coil
Ordering data
Input
Rated voltage
Rated current AC
Rated current DC
Power rating
AC Response/dropout Volt
DC Response/dropout Volt
AC pickup/dropout current
DC pickup/dropout current
5 V DC 1CO
12 VDC 1CO
24 V DC 1CO
24 V UC 1CO
5 V DC ±20%
12 V DC ±20%
24 V DC ±20 %
38.5 mA
193 mW
17 mA
210 mW
6.6mA
160 mW
3.2V/1.6V
6.4V/ 2.5V
15.4V/6.5V
21.6mA/8mA
8.4mA/2.4mA
4mA/1.2mA
24 V UC ±10 %
11 mA
6.4 mA
154 mW
15.8V/7V
15.8V/7V
3.6mA/1.3mA
3.6mA/1.3mA
MRS 5Vdc 1CO
MRS 12Vdc 1CO
MRS 24Vdc 1CO
MRS 24Vuc 1CO
8556080000
8556070000
8533640000
8556050000
MRZ 5Vdc 1CO
MRZ 12Vdc 1CO
MRZ 24VDC 1CO
MRZ 24Vuc 1CO
8556150000
8556140000
8533660000
8556120000
RSS113005 05Vdc-Rel1U
RSS113012 12Vdc-Rel1U
RSS113024 24Vdc-Rel1U
RSS113024 24Vdc-Rel1U
4061580000
4061610000
4060120000
4060120000
48 V UC 1CO
60 V DC 1CO
120 V UC 1CO
230 V AC 1CO
48 V UC ±10 %
5 mA
4 mA
190 mW
29V/11V
29V/11V
2.2mA/1.3mA
2.2mA/1.3mA
5 V DC ±20%
230 V AC ±10%
7.6 mA
1.6mA/0.6mA
120 V UC + 10 %/ -15 %
3.5 mA
3.5 mA
0.42 VA
71V/22V
71V/22V
1.8mA/0.5mA
1.8mA/0.5mA
MRS 48Vuc 1CO
MRS 60Vdc 1CO
MRS 120Vuc 1CO
MRS 230Vac 1CO
8556040000
8556060000
8556030000
8556020000
MRZ 48Vuc 1CO
MRZ 60Vdc 1CO
MRZ 120Vuc 1CO
MRZ 230Vac 1CO
8556110000
8556130000
8556100000
8556090000
RSS113048 48Vdc-Rel1U
RSS113060 60Vdc-Rel1U
RSS113060 60Vdc-Rel1U
RSS113024 24Vdc-Rel1U
4061620000
4061630000
4061630000
4060120000
C
Ordering data
Relay with socket
Screw connection
Type
Order No.
Tension spring connection
Type
Order No.
Ordering data
Spare relay (pluggable)
Type
Order No.
Note
Ordering data
Input
Rated voltage
Rated current AC
Rated current DC
Power rating
AC Response/dropout Volt
DC Response/dropout Volt
AC pickup/dropout current
DC pickup/dropout current
3.3 mA
200 mW
35V/11V
1.75 VA
103V/49V
5mA/2.5mA
Ordering data
Relay with socket
Screw connection
Type
Order No.
Tension spring connection
Type
Order No.
Ordering data
Spare relay (pluggable)
Type
Order No.
Note
C.25
Byte Precabling Solution
Relays – MICROSERIES
1 NO contact
special versions
• 24 VDC actuator version:
Bridgeable, potential-free connection for direct
connection of actuators at the output
• 120 VAC RC version:
RC circuit at the input guarantees safe
switching thresholds, e.g. for leakage currents on the control side
• 230 V UC version:
Can also be interconnected at input
with DC signals
C
13
(24 V DC)
A2
CC
A1
14
11
(120 V AC RC)
14
A2
12
A1
11
(230 V UC)
14
A2
12
A1
Ordering data
Input
Rated voltage
Rated current AC
Rated current DC
Power rating
AC Response/dropout Volt
DC Response/dropout Volt
AC pickup/dropout current
DC pickup/dropout current
Output
max. switching voltage AC1/Continuous current
min. switching power
Response time / Drop-out time
Contact base material
Mechanical endurance
max. switching frequency at rated load
Rated data
Status indicator/Free wheel diode
Reverse pol. prot
250 V/6 A
12 V / 100 mA
6.6 ms/5.8 ms
AgSnO
20*106 switching cycles
0.1 Hz
green LED/Yes
available
Ambient temperature (operational)
Storage temperature
Humidity
Approvals
Insulation coordination (EN 50178)
Standards
Rated voltage
Impulse withstand voltage
Clearance and creepage distances for control/load side
Surge category
Pollution severity
Protective separation to VDE 0106 part 101
-25 °C…+ 55 °C
-40 °C…+60 °C
40°C/93% RH, no condensation
CE; cULus;
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
Screw connection
2.5 / 0.5 / 4
93 / 6.1 / 92
mm2
mm
EN 50178
300 V
4 kV (1.2/50 µs)
≥ 5.5 mm
III
2
Cross-connectors and markers - refer to MICROSERIES accessories
Note
24 V DC ACT
120 V AC 1CO RC
230 V UC 1CO
24 V DC ±20 %
120 V AC + 10 %/ -15 %
7 mA
230 V UC +10 % / -15 %
3.5 mA
2.9 mA
0.8 VA / 660 mW
146 V / 124 V
155 V / 115 V
1.9 mA / 1.5 mA
1.9 mA / 1.0 mA
6.6 mA
160 mW
0.84 VA
79 V / 65 V
15,4 V / 6,5 V
4.5 mA / 3.7 mA
4 mA / 1,2 mA
Ordering data
Complete module
Screw connection
Type
Order No.
Tension clamp connection
Type
Order No.
MRS 24Vdc ACT
MRS 120VUC 1CO RC
8660920000
8825970000
MRS 230VUC 1CO
8825990000
MRZ 24VDC ACT
MRZ 120VUC 1CO RC
MRZ 230VUC 1CO
8660910000
8825960000
8825980000
RSS113024 24Vdc-Rel1U
RSS113060 60Vdc-Rel1U
RSS113060 60Vdc-Rel1U
4060120000
4061630000
4061630000
Ordering data
Spare relay, pluggable
Type
Order No.
Note
C.26
Tension clamp connection
1.5 / 0.5 / 2.5
94 / 6.1 / 91
Byte Precabling Solution
Optos – MICROSERIES
MOS / MOZ 3…48 V DC / 0.1 A
Universal interface between control and sensor/actuator
• Plug-in cross-connection ZQV 4N
• Interchangeable solid-state relay
• 6.1 mm wide
• Screw or tension clamp connection
• For mounting on TS 35
Load side
Nominal switching voltage
Nominal switching current
Voltage drop at max. load
Leakage current
Short-circuit-proof/Protective circuit
General data
Ambient temperature (operational)
Storage temperature
Approvals
(24 V DC)
(120 V UC)
(230 V AC)
C
3…48 V DC
0.1 A
≤1V
≤ 1 mA
no/Integrated free-wheel diode
-25 °C…+50 °C
-40 °C…+60 °C
CE; cULus;
Insulation coordination (EN 50 178)
Standards
Rated voltage
Rated impulse withstand voltage
Clearance and creepage distances for control/load side
Surge category
Pollution severity
EN 50178
300 V
4.0 kV
≥ 5.5 mm
III
2
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
Screw connection
2.5 / 0.5 / 4
93 / 6.1 / 92
mm2
mm
Tension clamp connection
1.5 / 0.5 / 2.5
94 / 6.1 / 91
Cross-connectors and markers - refer to MICROSERIES accessories
Note
Ordering data
5 V DC / 24 V DC 0.1 A
24 V DC / 24 V DC 0,1 A
120 V UC / 24 V DC 0,1 A
230 V AC / 24 V DC 0,1 A
Control side
Rated voltage
Power rating
max. input frequency
Switch-on delay
Switch-off delay
5 V DC ±20%
55 mW ±10 %
10 Hz
< 6,5 ms
< 10 ms
24 V DC ±20 %
140 mW
300 Hz
35µs
355µs
120 V UC + 10 %/ -15 %
340 mW / 0.4 VA
DC: 10 Hz /AC: 3 Hz
< 6.5 ms
< 10 ms
230 V AC ±10%
1.7 VA
3 Hz
< 6.5 ms
< 10 ms
MOS 5Vdc / 24Vdc 0,1A
MOS 24Vdc / 24Vdc 0.1A
MOS 120Vuc / 24Vdc 0.1A
MOS 230Vac / 24Vdc 0.1A
8633020000
8607340000
8607690000
8607710000
MOZ 5Vdc / 24Vdc 0.1A
MOZ 24Vdc / 24Vdc 0,1A
MOZ 120Vuc / 24Vdc 0.1A
MOZ 230Vac / 24Vdc 0.1A
8633010000
8607360000
8607730000
8607750000
SSS Relais 5V/24V 0,1ADC
SSS Relais 24V/24V 0,1Adc
SSS Relais 60V/24V 0,1Adc
SSS Relais 24V/24V 0,1Adc
4064320000
4061180000
4061230000
4061180000
Ordering data
Complete module
Screw connection
Type
Order No.
Tension clamp connection
Type
Order No.
Ordering data
Spare relay, pluggable
Type
Order No.
Note
C.27
Byte Precabling Solution
Optos – MICROSERIES
MOS / MOZ 24…240 V AC / 1 A
Universal interface between control and sensor/actuator
• Plug-in cross-connection ZQV 4N
• Interchangeable solid-state relay
• 6.1 mm wide
• Screw or tension clamp connection
• For mounting on TS 35
Load side
Nominal switching voltage
Nominal switching current
Voltage drop at max. load
Leakage current
Short-circuit-proof/Protective circuit
General data
Ambient temperature (operational)
Storage temperature
Approvals
C
(24 V DC)
(120 V UC)
(230 V AC)
24…240 V AC
1A
approx. 1.6 V
≤ 20 µA
no/Integrated free-wheel diode
-25 °C…+50 °C
-40 °C…+60 °C
CE; cULus;
Insulation coordination (EN 50 178)
Standards
Rated voltage
Rated impulse withstand voltage
Clearance and creepage distances for control/load side
Surge category
Pollution severity
EN 50178
300 V
4.0 kV
≥ 5.5 mm
III
2
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
Screw connection
2.5 / 0.5 / 4
93 / 6.1 / 92
mm2
mm
Cross-connectors and markers - refer to MICROSERIES accessories
Note
Ordering data
24 V DC / 230 V AC 1 A
120 V UC / 230 V AC 1 A
230 V AC / 230 V AC 1 A
Control side
Rated voltage
Power rating
max. input frequency
Switch-on delay
Switch-off delay
24 V DC ±20 %
250 mW ± 15 %
3 Hz
< 11 ms
< 11 ms
120 V UC + 10 %/ -15 %
0.4 VA ±15%
3 Hz
< 11 ms
< 11 ms
230 V UC ±10 %
1,7 VA ± 20%
3 Hz
< 20 ms
< 20 ms
MOS 24Vdc/ 230VAC 1A
MOS 120Vuc / 230VAC 1A
MOS 230Vuc/ 230Vac 1A
8652010000
8651930000
8651990000
MOZ 24Vdc/ 230VAC 1A
MOZ 120Vuc / 230VAC 1A
MOZ 230Vuc/ 230VAC 1A
8652020000
8651950000
8651970000
SSS Relais 24V/230V 1Aac
SSS Relais 60V/230V 1Aac
SSS Relais 24V/230V 1Aac
4061210000
4061220000
4061210000
Ordering data
Complete module
Screw connection
Type
Order No.
Tension clamp connection
Type
Order No.
Ordering data
Spare relay, pluggable
Type
Order No.
Note
C.28
Tension clamp connection
1.5 / 0.5 / 2.5
94 / 6.1 / 91
Byte Precabling Solution
Optos – MICROSERIES
MOS / MOZ 3…33 V DC / 2 A
Universal interface between control and sensor/actuator
• Plug-in cross-connection ZQV 4N
• Interchangeable solid-state relay
• 6.1 mm wide
• Screw or tension clamp connection
• For mounting on TS 35
Load side
Nominal switching voltage
Nominal switching current
Voltage drop at max. load
Leakage current
Short-circuit-proof/Protective circuit
General data
Ambient temperature (operational)
Storage temperature
Approvals
(24 V DC)
(120 V UC)
(230 V AC)
C
3…33 V DC
2A
≤ 120 mV
≤ 1 mA
no/Integrated free-wheel diode
-25 °C…+50 °C
-40 °C…+60 °C
CE; cULus;
Insulation coordination (EN 50 178)
Standards
Rated voltage
Rated impulse withstand voltage
Clearance and creepage distances for control/load side
Surge category
Pollution severity
EN 50178
300 V
4.0 kV
≥ 5.5 mm
III
2
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
Screw connection
2.5 / 0.5 / 4
93 / 6.1 / 92
mm2
mm
Tension clamp connection
1.5 / 0.5 / 2.5
94 / 6.1 / 91
Cross-connectors and markers - refer to MICROSERIES accessories
Note
Ordering data
5 V DC / 24 V DC 2 A
24 V DC / 24 V DC 2 A
120 V UC / 24 V DC 2 A
230 V AC / 24 V DC 2 A
Control side
Rated voltage
Power rating
max. input frequency
Switch-on delay
Switch-off delay
5 V DC ±20%
55 mW ±10 %
300 Hz
< 55 µs
< 1 ms
24 V DC ±20 %
140 mW
300 Hz
< 55 µs
< 1.2 ms
120 V UC + 10 %/ -15 %
340 mW / 0.4 VA
DC: 10 Hz /AC: 3 Hz
< 6.5 ms
< 10 ms
230 V AC ±10%
1.7 VA
3 Hz
< 6.5 ms
< 10 ms
MOS 5Vdc / 24Vdc 2A
MOS 24Vdc / 24Vdc 2A
MOS 120Vuc / 24Vdc 2A
MOS 230Vac / 24Vdc 2A
8633000000
8607350000
8607700000
8607720000
MOZ 5Vdc / 24Vdc 2A
MOZ 24Vdc / 24Vdc 2A
MOZ 120Vuc / 24Vdc 2A
MOZ 230Vac / 24Vdc 2A
8632990000
8607370000
8607740000
8607760000
SSS Relais 5V/24V 2ADC
SSS Relais 24V/24V 2Adc
SSS Relais 60V/24V 2Adc
SSS Relais 24V/24V 2Adc
4064310000
4061190000
4061200000
4061190000
Ordering data
Complete module
Screw connection
Type
Order No.
Tension clamp connection
Type
Order No.
Ordering data
Spare relay, pluggable
Type
Order No.
Note
C.29
Byte Precabling Solution
Optos – MICROSERIES
MOS / MOZ actuator version 3…33 V DC / 2 A
Universal interface between control and sensor/actuator
• Plug-in cross-connection ZQV 4N
• Interchangeable solid-state relay
• 6.1 mm wide
• Screw or tension clamp connection
• For mounting on TS 35
• 24 V DC actuator version:
Bridgeable, potential-free connection of actuators on output
C
Load side
Nominal switching voltage
Nominal switching current
Voltage drop at max. load
Short-circuit-proof/Protective circuit
General data
Ambient temperature (operational)
Storage temperature
Approvals
Insulation coordination (EN 50 178)
13
cc
(24 V DC)
24 V DC ACT
Control side
Rated voltage
Power rating
max. input frequency
Switch-on delay
Switch-off delay
24 V DC ±20 %
140 mW ±10 %
< 55 µs
< 1,2 ms
Ordering data
Complete module
Screw connection
Type
Order No.
Tension clamp connection
Type
Order No.
MOS 24Vdc / 24Vdc ACT
8676250000
MOZ 24Vdc / 24Vdc ACT
8676230000
Ordering data
Spare relay, pluggable
Type
Order No.
Note
C.30
SSS Relais 24V/24V 2Adc
4061190000
-25 °C…+50 °C
-40 °C…+60 °C
CE; cULus;
Standards
Rated voltage
Rated impulse withstand voltage
Clearance and creepage distances for control/load side
Surge category
Pollution severity
EN 50178
300 V
4.0 kV
≥ 5.5 mm
III
2
Dimensions
Clamping range (rating- / min. / max.)
Length x width x height
Screw connection
2.5 / 0.5 / 4
93 / 6.1 / 92
Note
Ordering data
3…33 V DC
2A
≤ 120 mV
no/Integrated free-wheel diode
mm2
mm
Tension clamp connection
1.5 / 0.5 / 2.5
94 / 6.1 / 91
Cross-connectors and markers - refer to MICROSERIES accessories
Byte Precabling Solution
Universal Cables
H-system cables
All PLCs
C
Card type
16-Input/Output card
16-Input/Output card (LC)
16-Input/Output card
16-Input/Output card (LC)
7789100xxx
7789388xxx
7789306xxx
7789301xxx
HE - 20-pole female
0.25 mm2 LIYY
< 80 Ω/km
No connector - ferrules
HE - 20-pole female
0.14 mm2 LIYY
< 150 Ω/km
No connector - ferrules
HE - 20-pole female
0.25 mm2 LIYY
< 80 Ω/km
HE – 20-pole female
HE - 20-pole female
0.14 mm2 LIYY
< 150 Ω/km
HE – 20-pole female
4-Input/Output card
8-Input/Output card
16-Input/Output card
8 - 16-Input/Output card
7789250xxx
7789252xxx
7789254xxx
7789262xxx
D-Sub - 15-pole female
0.25 mm2 LIYCY
< 80 Ω/km
No connector - ferrules
D-Sub - 25-pole female
0.25 mm2 LIYCY
< 80 Ω/km
No connector - ferrules
D-Sub - 37-pole female
0.25 mm2 LIYCY
< 80 Ω/km
No connector - ferrules
D-Sub - 37-pole female
0.25 mm2 LIYCY
< 80 Ω/km
D-Sub - 37-pole male
Order No.
Data
Interface connector
Cable type
Resistance
PLC connector
S-system cables
All PLCs
Card type
Order No.
Data
Interface connector
Cable type
Resistance
PLC connector
C.31
Byte Precabling Solution
Universal Cables
R System cables
All PLCs
C
Card type
32-Input/Output card
16-Input/Output card
8-Input/Output card
7789106xxx
7789104xxx
7789108xxx
RSV 1.6 - 36-pole male
0.25 mm2 LIYY
< 80 Ω/km
No connector - ferrules
RSV 1.6 - 24-pole male
0.25 mm2 LIYY
< 80 Ω/km
No connector - ferrules
RSV 1.6 - 12-pole male
0.25 mm2 LIYY
< 80 Ω/km
No connector - ferrules
Order No.
Data
Interface connector
Cable type
Resistance
PLC connector
Table of color codes according to DIN 47.100
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
C.32
Color
White
Brown
Green
Yellow
Gray
Pink
Blue
Red
Black
Violet
Gray/Pink
Red/Blue
White/Green
Brown/Green
White/Yellow
Yellow/Brown
White/Gray
Gray/Brown
White/Pink
Pink/Brown
White/Blue
No.
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
Color
Brown/Blue
White/Red
Brown/Red
White/Black
Brown/Black
Gray/Green
Yellow/Gray
Pink/Green
Yellow/Pink
Green/Blue
Yellow/Blue
Green/Red
Yellow/Red
Green/Black
Yellow/Black
Gray/Blue
Pink/Blue
Gray/Red
Pink/Red
Gray/Black
Pink/Black
No.
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
Color
Blue/Black
Red/Black
White/Brown/Black
Yellow/Green/Black
Gray/Pink/Black
Blue/Red/Black
White/Green/Black
Green/Brown/Black
White/Yellow/Black
Yellow/Brown/Black
White/Gray/Black
Gray/Brown/Black
White/Pink/Black
Pink/Brown/Black
White/Blue/Black
Brown/Blue/Black
White/Red/Black
Brown/Red/Black
Black/White
Byte Precabling Solution
Universal Cables
Preassembled control lead
The control lead is preassembled with 10 or 40 pole
plug-in socket according to IEC 603/1 DIN 41 651.
It is used for connecting the PLC front adapter with
the passive or active PLC input/output modules.
The connecting line for the PLC system interface is
available in standard lengths of 1m to 5m.
Spring socket DIN 416451 / IEC 603-1
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
Color code
black
brown
red
orange
yellow
green
blue
violet
gray
white
white/black
white/brown
white/red
white/orange
white/yellow
white/green
white/blue
white/violet
white/gray
brown/black
brown/red
brown/orange
brown/yellow
brown/green
brown/blue
brown/violet
brown/gray
brown/white
green/black
green/brown
green/red
green/orange
green/blue
green/violet
green/gray
green/white
yellow-black
yellow-brown
yellow-red
yellow-orange
Function
BB3 +
B3.7
B3.6
B3.5
B3.4
B3.3
B3.2
B3.1
B3.0
BB2 +
B2.7
B2.6
B2.5
B2.4
B2.3
B2.2
B2.1
B2.0
BB1 +
B1.7
B1.6
B1.5
B1.4
B1.3
B1.2
B1.1
B1.0
BB0 +
B0.7
B0.6
B0.5
B0.4
B0.3
B0.2
B0.1
B0.0
C
Technical data
Rated voltage
Current carrying capacity
Total current load
- 40-pole lead
- 10-pole lead
Rated cross-section of cores
Resistance value
Storage temperature
300 V
1A
Ordering data
Ordering data
Ribbon round conductor designed on both sides
Type
Length*
Order No.
10-pole plug connector for transfer of 1 byte
to DIN 41651 / IEC 603-1
FBK 10/100 RK
1.00 m
8235360000
FBK 10/200 RK
2.00 m
8235380000
FBK 10/350 RK
3.50 m
8235410000
FBK 10/400 RK
4.00 m
8235420000
FBK 10/500 RK
5.00 m
8235440000
Ribbon round conductor designed on both sides
Type
Length*
Order No.
40-pole plug connector for transfer of 4 byte
to DIN 41651 / IEC 603-1
FBK 40/050 RK
1.00 m
8216350000
FBK 40/150 RK
1.50 m
8216360000
FBK 40/200 RK
2.00 m
8216370000
FBK 40/250 RK
2.50 m
8216380000
FBK 40/300 RK
3.00 m
8216390000
FBK 40/350 RK
3.50 m
8216400000
FBK 40/400 RK
4.00 m
8216410000
FBK 40/500 RK
5.00 m
8235350000
26 A/∅T = 20 K
11,5 A/∅T = 20 K
0,14 mm2
55 mΩ/m
-10 ºC...+80 ºC
* special lengths on request
C.33
Byte Precabling Solution
Accessories
Electromechanical relays
Relay type
Order No.
C
Data
Coil rated voltage
Coil rated current/Power consumption
Release Voltage/Min. holding current
Contact configuration
Contact material
Max. turn on delay / max turn-off delay
Power/ max. resistive load switchable under AC
Power/max. switchable resistive load under DC
Max. current
Min. switchable load
Dielectric strength voltage (coil/contact)
Dielectric strength voltage (between contacts of the same pole)
Dielectric strength voltage (between contacts of different poles)
Mechanical service life
Electrical service life
Type Riderseries - 1CO
RCL 314024
Type Riderseries - 2CO
8693260000
RCL 424024
Type Microseries - 1CO
4058570000
24 Vdc (+10, -30%)
17 mA / 0.4 VA
2.4 V/1.6 mA
1CO
AgNi 90/10
7 ms / 3 ms (20 ms with damping diode.)
4000 VA / 250 V - 16 A (cosϕ=1)
300 W / 30 V - 10 A (L/R=0 ms)
16 A
10 mA/ 12 V
4000 Vac (50/60Hz) / 1 min.
1000 Vac (50/60Hz) / 1 min.
30 x 106 switching cycles
1 x 105 switching cycles (2500 VA - cosϕ=1)
24 Vdc (+10, -30%)
17 mA / 0.4 VA
2.4 V/ 1.6 mA
2CO
AgNi 90/10
7 ms / 3 ms (20 ms with damping diode.)
2000 VA / 250 V - 8 A (cosϕ=1)
150 W / 30 V - 5 A (L/R=0 ms)
8A
10 mA/ 12 V
4000 Vac (50/60Hz) / 1 min.
1000 Vac (50/60Hz) / 1 min.
2500 Vac (50/60Hz) / 1 min.
30 x 106 switching cycles
1 x 105 switching cycles (1250 VA - cosϕ=1)
Type Plugseries - ODC
Type Plugseries - OAC
RSS 113024 (standard)
4060120000
RSS 112024 (Au plated)
4061590000
Standard
Au plated
24 Vdc (+/– 20%)
6.6 mA / 160 mW
6.5 V/ 1.2 mA
1CO
AgSnO2
AgSnO2 5µ Au
5 ms / 2.5 ms
1500 VA / 250 V - 6 A (cosϕ=1)
–
6A
100 mA / 12 V
10 mA / 12 V
20 x 106 switching cycles
6 x 104 switching cycles (1500 VA - cosϕ=1)
Static relays
Static relay type
Order No.
Data
Rated input voltage/operating voltage
Input current
Drop out voltage
Output voltage
Output current
Inrush current
Turn-on delay
Turn-off delay
Output voltage drop
Leakage current
Dielectric strength voltage (input/output)
C.34
STD 07205
15...24 Vdc / 12...30 Vdc
max. 10 mA
–
max. 30 Vdc
0.001...2.5 Adc
12 Adc (1 s)
2 ms max.
18 ms max.
max. 0.4 V
10 µA
4000 Vac
8576340000
STA 07220
Type Microseries
8576370000
15...24 Vdc - / 12...30 Vdc
max. 10 mA
–
12...275 Vac
0.05...2 Aac
100 Aac (10 ms)
12 ms max.
20 ms max.
10 µA
4000 Vac
SSS 24/24-100mA
SSS 24/24-2A
100 mA version
24 Vdc/16...30 Vdc
7 mA ±10%
10 Vdc
3…48 Vdc
100 mAdc max.
–
–
–
<1 V
–
2500 Vac
4061180000
4061190000
2 A version
24 Vdc/16...30 Vdc
7 mA ±10%
10 Vdc
3…33 Vdc
2 Adc
–
–
–
<120 mV
–
2500 Vac
Accessories
General data – MICROSERIES
Plug-in cross-connection
No. of poles
Technical data
Qty
Order No.
2
3
4
10
20
60
60
60
20
20
1758250000
1762630000
1762620000
1758260000
1909020000
red
ZQV 4N / 2 RT
ZQV 4N / 3 RT
ZQV 4N / 4 RT
ZQV 4N / 10 RT
ZQV 4N / 20 RT
2
3
4
10
20
60
60
60
20
20
1793950000
1793980000
1794010000
1794040000
1909150000
blue
ZQV 4N / 2 BL
ZQV 4N / 3 BL
ZQV 4N / 4 BL
ZQV 4N / 10 BL
ZQV 4N / 20 BL
2
3
4
10
20
60
60
60
20
20
1793960000
1793990000
1794020000
1794050000
1909100000
black
ZQV 4N / 2 SW
ZQV 4N / 3 SW
ZQV 4N / 4 SW
ZQV 4N / 10 SW
ZQV 4N / 20 SW
2
3
4
10
20
60
60
60
20
20
1793970000
1794000000
1794030000
1794060000
1909120000
Other accessories
General technical data
Nominal torque
Continuous current for 2-pole cross-connection
A
Continuous current for multi-pole cross-connection
A
Stripping length
mm
Ingress protection class
Housing material
UL 94 flammability rating
Nominal current
A
Nominal voltage
V
Screw
connection
0.5 … 4.0
0.5 … 2.5
0.5 … 1.5
0.5 … 1.5
0.13 … 4.0
A3
10
10
10
IP 20
Wemid
V-0
6
250
0.6
10
10
7
IP 20
Wemid
V-0
6
250
C
Order No.
8826000000
8826010000
8826020000
8826030000
8826040000
8826050000
12 x 6 mm
200
1061160000
484 labels / sheet
10
1686360000
10
9008330000
Tension clamp connection
Screw connection
92 mm
10
10
10
10
10
10
91 mm
Qty
94 mm
93 mm
6.1 mm
Screwdriver
SD 0,6 x 3,5 x 100
mm2
mm2
mm2
mm2
mm2
size
Tension clamp
connection
0.5 … 2.5
0.5 … 2.5
0.5 … 1.5
0.5 … 1.5
0.13 … 2.5
A2
Dimensions
Type
Base only
MRZ 24VDC 1CO BASIS
MRS 24VDC 1CO BASIS
MRZ 120VUC 1CO BASIS
MRS 120VUC 1CO BASIS
MRZ 230VAC 1CO BASIS
MRS 230VAC 1CO BASIS
Labels, Lasermark
LM MT 300 15/6 ge
Conductor
Solid H07V-U
Stranded H07V-K
“f” with wire end ferrules to DIN 46228-1
“f” with wire end ferrules with plastic collar
Max. clamping range
Plug gauge to IEC 60947-1
6.1 mm
Type
yellow
ZQV 4N / 2 GE
ZQV 4N / 3 GE
ZQV 4N / 4 GE
ZQV 4N / 10 GE
ZQV 4N / 20
Markers
WS 12/6
Byte Precabling Solution
Accessories
C.35
C
C.36
Byte Precabling Solution